| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Variscite Symphony carrier board for VAR-SOM-AM62P |
| 4 |
* |
| 5 |
* Link: https://www.variscite.it/product/single-board-computers/symphony-board/ |
| 6 |
* |
| 7 |
* Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/ |
| 8 |
* |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
|
| 13 |
#include "k3-am62p5-var-som.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Variscite VAR-SOM-AM62P on Symphony-Board"; |
| 17 |
compatible = "variscite,var-som-am62p-symphony", "variscite,var-som-am62p", "ti,am62p5"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
ethernet0 = &cpsw_port1; |
| 21 |
ethernet1 = &cpsw_port2; |
| 22 |
mmc0 = &sdhci0; |
| 23 |
mmc1 = &sdhci1; |
| 24 |
mmc2 = &sdhci2; |
| 25 |
serial0 = &main_uart0; |
| 26 |
serial2 = &main_uart2; |
| 27 |
serial5 = &main_uart5; |
| 28 |
serial6 = &main_uart6; |
| 29 |
spi5 = &main_spi2; |
| 30 |
usb0 = &usb0; |
| 31 |
usb1 = &usb1; |
| 32 |
}; |
| 33 |
|
| 34 |
chosen { |
| 35 |
stdout-path = "serial0:115200n8"; |
| 36 |
}; |
| 37 |
|
| 38 |
clk_ov5640_fixed: clock-24000000 { |
| 39 |
#clock-cells = <0>; |
| 40 |
compatible = "fixed-clock"; |
| 41 |
clock-frequency = <24000000>; |
| 42 |
}; |
| 43 |
|
| 44 |
gpio-keys { |
| 45 |
compatible = "gpio-keys"; |
| 46 |
|
| 47 |
button-back { |
| 48 |
label = "Back"; |
| 49 |
linux,code = <KEY_BACK>; |
| 50 |
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; |
| 51 |
}; |
| 52 |
|
| 53 |
button-home { |
| 54 |
label = "Home"; |
| 55 |
linux,code = <KEY_HOME>; |
| 56 |
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; |
| 57 |
}; |
| 58 |
|
| 59 |
button-menu { |
| 60 |
label = "Menu"; |
| 61 |
linux,code = <KEY_MENU>; |
| 62 |
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
gpio-leds { |
| 67 |
compatible = "gpio-leds"; |
| 68 |
|
| 69 |
led-heartbeat { |
| 70 |
label = "Heartbeat"; |
| 71 |
linux,default-trigger = "heartbeat"; |
| 72 |
gpios = <&pca9534 0 GPIO_ACTIVE_LOW>; |
| 73 |
}; |
| 74 |
}; |
| 75 |
|
| 76 |
reg_2p8v: regulator-2p8v { |
| 77 |
compatible = "regulator-fixed"; |
| 78 |
regulator-name = "2P8V"; |
| 79 |
regulator-min-microvolt = <2800000>; |
| 80 |
regulator-max-microvolt = <2800000>; |
| 81 |
vin-supply = <®_3v3>; |
| 82 |
regulator-always-on; |
| 83 |
}; |
| 84 |
|
| 85 |
reg_1p8v: regulator-1p8v { |
| 86 |
compatible = "regulator-fixed"; |
| 87 |
regulator-name = "1P8V"; |
| 88 |
regulator-min-microvolt = <1800000>; |
| 89 |
regulator-max-microvolt = <1800000>; |
| 90 |
vin-supply = <®_3v3>; |
| 91 |
regulator-always-on; |
| 92 |
}; |
| 93 |
|
| 94 |
reg_1p5v: regulator-1p5v { |
| 95 |
compatible = "regulator-fixed"; |
| 96 |
regulator-name = "1P5V"; |
| 97 |
regulator-min-microvolt = <1500000>; |
| 98 |
regulator-max-microvolt = <1500000>; |
| 99 |
vin-supply = <®_3v3>; |
| 100 |
regulator-always-on; |
| 101 |
}; |
| 102 |
|
| 103 |
reg_sdhc1_vmmc: regulator-sdhc1 { |
| 104 |
compatible = "regulator-fixed"; |
| 105 |
regulator-name = "+V3.3_SD"; |
| 106 |
vin-supply = <®_sdhc1_vmmc_int>; |
| 107 |
regulator-min-microvolt = <3300000>; |
| 108 |
regulator-max-microvolt = <3300000>; |
| 109 |
regulator-boot-on; |
| 110 |
enable-active-high; |
| 111 |
gpio = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; |
| 112 |
bootph-all; |
| 113 |
}; |
| 114 |
|
| 115 |
reg_sdhc1_vmmc_int: regulator-sdhc1-int { |
| 116 |
compatible = "regulator-fixed"; |
| 117 |
regulator-name = "+V3.3_SD_INT"; |
| 118 |
pinctrl-names = "default"; |
| 119 |
pinctrl-0 = <&pinctrl_sd1_vmmc>; |
| 120 |
regulator-min-microvolt = <3300000>; |
| 121 |
regulator-max-microvolt = <3300000>; |
| 122 |
regulator-boot-on; |
| 123 |
enable-active-high; |
| 124 |
gpio = <&main_gpio0 53 GPIO_ACTIVE_HIGH>; |
| 125 |
bootph-all; |
| 126 |
}; |
| 127 |
|
| 128 |
reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc { |
| 129 |
compatible = "regulator-gpio"; |
| 130 |
regulator-name = "+V3.3_SD_VQMMC"; |
| 131 |
pinctrl-names = "default"; |
| 132 |
pinctrl-0 = <&pinctrl_sd1_vqmmc>; |
| 133 |
regulator-min-microvolt = <1800000>; |
| 134 |
regulator-max-microvolt = <3300000>; |
| 135 |
regulator-boot-on; |
| 136 |
gpios = <&main_gpio0 56 GPIO_ACTIVE_HIGH>; |
| 137 |
states = <1800000 0x0>, |
| 138 |
<3300000 0x1>; |
| 139 |
bootph-all; |
| 140 |
}; |
| 141 |
|
| 142 |
reg_ov5640_buf_en: regulator-camera-buf-en { |
| 143 |
compatible = "regulator-fixed"; |
| 144 |
regulator-name = "ov5640_buf_en"; |
| 145 |
gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>; |
| 146 |
regulator-always-on; |
| 147 |
regulator-boot-on; |
| 148 |
}; |
| 149 |
|
| 150 |
transceiver1: can-phy { |
| 151 |
compatible = "ti,tcan1042"; |
| 152 |
#phy-cells = <0>; |
| 153 |
max-bitrate = <5000000>; |
| 154 |
}; |
| 155 |
|
| 156 |
connector { |
| 157 |
compatible = "gpio-usb-b-connector", "usb-b-connector"; |
| 158 |
pinctrl-names = "default"; |
| 159 |
pinctrl-0 = <&pinctrl_extcon>; |
| 160 |
label = "USB-C"; |
| 161 |
id-gpios = <&main_gpio1 12 GPIO_ACTIVE_HIGH>; |
| 162 |
status = "okay"; |
| 163 |
|
| 164 |
port { |
| 165 |
usb_con_hs: endpoint { |
| 166 |
remote-endpoint = <&typec_hs>; |
| 167 |
}; |
| 168 |
}; |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
&cdns_csi2rx0 { |
| 173 |
ports { |
| 174 |
#address-cells = <1>; |
| 175 |
#size-cells = <0>; |
| 176 |
|
| 177 |
csi0_port0: port@0 { |
| 178 |
reg = <0>; |
| 179 |
status = "okay"; |
| 180 |
|
| 181 |
csi2rx0_in_sensor: endpoint { |
| 182 |
remote-endpoint = <&csi2_cam0>; |
| 183 |
bus-type = <4>; /* CSI2 DPHY. */ |
| 184 |
clock-lanes = <0>; |
| 185 |
data-lanes = <1 2>; |
| 186 |
}; |
| 187 |
}; |
| 188 |
}; |
| 189 |
}; |
| 190 |
|
| 191 |
&cpsw3g { |
| 192 |
pinctrl-names = "default"; |
| 193 |
pinctrl-0 = <&pinctrl_rgmii1>, |
| 194 |
<&pinctrl_rgmii2>; |
| 195 |
status = "okay"; |
| 196 |
}; |
| 197 |
|
| 198 |
&cpsw3g_mdio { |
| 199 |
pinctrl-names = "default"; |
| 200 |
pinctrl-0 = <&pinctrl_mdio1>; |
| 201 |
status = "okay"; |
| 202 |
|
| 203 |
cpsw3g_phy1: ethernet-phy@5 { |
| 204 |
compatible = "ethernet-phy-id0283.bc30"; |
| 205 |
reg = <5>; |
| 206 |
reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>; |
| 207 |
reset-assert-us = <10000>; |
| 208 |
reset-deassert-us = <100000>; |
| 209 |
}; |
| 210 |
}; |
| 211 |
|
| 212 |
&cpsw_port2 { |
| 213 |
/* |
| 214 |
* The required RGMII TX and RX 2ns delays are implemented directly |
| 215 |
* in hardware via passive delay elements on the Symphony PCB. |
| 216 |
* No delay configuration is needed in software via PHY driver. |
| 217 |
*/ |
| 218 |
phy-mode = "rgmii"; |
| 219 |
phy-handle = <&cpsw3g_phy1>; |
| 220 |
status = "okay"; |
| 221 |
}; |
| 222 |
|
| 223 |
&dphy0 { |
| 224 |
status = "okay"; |
| 225 |
}; |
| 226 |
|
| 227 |
&main_i2c0 { |
| 228 |
pinctrl-names = "default"; |
| 229 |
pinctrl-0 = <&pinctrl_i2c0>; |
| 230 |
clock-frequency = <400000>; |
| 231 |
status = "okay"; |
| 232 |
|
| 233 |
ov5640: camera@3c { |
| 234 |
compatible = "ovti,ov5640"; |
| 235 |
reg = <0x3c>; |
| 236 |
clocks = <&clk_ov5640_fixed>; |
| 237 |
clock-names = "xclk"; |
| 238 |
AVDD-supply = <®_2p8v>; |
| 239 |
DOVDD-supply = <®_1p8v>; |
| 240 |
DVDD-supply = <®_1p5v>; |
| 241 |
powerdown-gpios = <&main_gpio0 10 GPIO_ACTIVE_HIGH>; |
| 242 |
reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_LOW>; |
| 243 |
pinctrl-names = "default"; |
| 244 |
pinctrl-0 = <&pinctrl_ov5640>; |
| 245 |
|
| 246 |
port { |
| 247 |
csi2_cam0: endpoint { |
| 248 |
remote-endpoint = <&csi2rx0_in_sensor>; |
| 249 |
clock-lanes = <0>; |
| 250 |
data-lanes = <1 2>; |
| 251 |
}; |
| 252 |
}; |
| 253 |
}; |
| 254 |
|
| 255 |
/* GPIO expander */ |
| 256 |
pca9534: gpio@20 { |
| 257 |
compatible = "nxp,pca9534"; |
| 258 |
reg = <0x20>; |
| 259 |
gpio-controller; |
| 260 |
pinctrl-names = "default"; |
| 261 |
pinctrl-0 = <&pinctrl_pca9534>; |
| 262 |
interrupt-parent = <&main_gpio1>; |
| 263 |
interrupts = <30 IRQ_TYPE_EDGE_FALLING>; |
| 264 |
#gpio-cells = <2>; |
| 265 |
status = "okay"; |
| 266 |
|
| 267 |
usb3-sel-hog { |
| 268 |
gpio-hog; |
| 269 |
gpios = <4 0>; |
| 270 |
output-low; |
| 271 |
line-name = "usb3_sel"; |
| 272 |
}; |
| 273 |
|
| 274 |
eth-som-vselect-hog { |
| 275 |
gpio-hog; |
| 276 |
gpios = <6 0>; |
| 277 |
output-low; |
| 278 |
line-name = "eth-vselect"; |
| 279 |
}; |
| 280 |
|
| 281 |
eth-mdio-enable-hog { |
| 282 |
gpio-hog; |
| 283 |
gpios = <7 0>; |
| 284 |
output-high; |
| 285 |
line-name = "eth-mdio-enable"; |
| 286 |
}; |
| 287 |
}; |
| 288 |
}; |
| 289 |
|
| 290 |
&main_i2c1 { |
| 291 |
pinctrl-names = "default"; |
| 292 |
pinctrl-0 = <&pinctrl_i2c1>; |
| 293 |
clock-frequency = <400000>; |
| 294 |
status = "okay"; |
| 295 |
|
| 296 |
rtc@68 { |
| 297 |
compatible = "dallas,ds1337"; |
| 298 |
reg = <0x68>; |
| 299 |
}; |
| 300 |
}; |
| 301 |
|
| 302 |
&main_mcan0 { |
| 303 |
pinctrl-names = "default"; |
| 304 |
pinctrl-0 = <&pinctrl_mcan0>; |
| 305 |
phys = <&transceiver1>; |
| 306 |
status = "okay"; |
| 307 |
}; |
| 308 |
|
| 309 |
&main_pmx0 { |
| 310 |
pinctrl_extcon: main-extcon-pins { |
| 311 |
pinctrl-single,pins = < |
| 312 |
AM62PX_IOPAD(0x01a8, PIN_INPUT, 7) /* (F25) MCASP0_AFSX.GPIO1_12 */ |
| 313 |
>; |
| 314 |
}; |
| 315 |
|
| 316 |
pinctrl_i2c0: main-i2c0-default-pins { |
| 317 |
pinctrl-single,pins = < |
| 318 |
AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */ |
| 319 |
AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */ |
| 320 |
>; |
| 321 |
}; |
| 322 |
|
| 323 |
pinctrl_i2c1: main-i2c1-default-pins { |
| 324 |
pinctrl-single,pins = < |
| 325 |
AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */ |
| 326 |
AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */ |
| 327 |
>; |
| 328 |
bootph-all; |
| 329 |
}; |
| 330 |
|
| 331 |
pinctrl_mcan0: main-mcan0-default-pins { |
| 332 |
pinctrl-single,pins = < |
| 333 |
AM62PX_IOPAD(0x01dc, PIN_INPUT, 0) /* (F20) MCAN0_RX */ |
| 334 |
AM62PX_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (B23) MCAN0_TX */ |
| 335 |
>; |
| 336 |
}; |
| 337 |
|
| 338 |
pinctrl_mmc1: main-mmc1-default-pins { |
| 339 |
pinctrl-single,pins = < |
| 340 |
AM62PX_IOPAD(0x023c, PIN_INPUT, 0) /* (H20) MMC1_CMD */ |
| 341 |
AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK */ |
| 342 |
AM62PX_IOPAD(0x0230, PIN_INPUT, 0) /* (H21) MMC1_DAT0 */ |
| 343 |
AM62PX_IOPAD(0x022c, PIN_INPUT, 0) /* (H23) MMC1_DAT1 */ |
| 344 |
AM62PX_IOPAD(0x0228, PIN_INPUT, 0) /* (H22) MMC1_DAT2 */ |
| 345 |
AM62PX_IOPAD(0x0224, PIN_INPUT, 0) /* (H25) MMC1_DAT3 */ |
| 346 |
AM62PX_IOPAD(0x0240, PIN_INPUT, 0) /* (D23) MMC1_SDCD */ |
| 347 |
>; |
| 348 |
bootph-all; |
| 349 |
}; |
| 350 |
|
| 351 |
pinctrl_rgmii2: main-rgmii2-default-pins { |
| 352 |
pinctrl-single,pins = < |
| 353 |
AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0 */ |
| 354 |
AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1 */ |
| 355 |
AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2 */ |
| 356 |
AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3 */ |
| 357 |
AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC */ |
| 358 |
AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */ |
| 359 |
AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0 */ |
| 360 |
AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1 */ |
| 361 |
AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2 */ |
| 362 |
AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3 */ |
| 363 |
AM62PX_IOPAD(0x0168, PIN_INPUT_PULLDOWN, 0) /* (D16) RGMII2_TXC */ |
| 364 |
AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */ |
| 365 |
>; |
| 366 |
}; |
| 367 |
|
| 368 |
pinctrl_spi2: main-spi2-default-pins { |
| 369 |
pinctrl-single,pins = < |
| 370 |
AM62PX_IOPAD(0x01b0, PIN_INPUT, 1) /* (G20) MCASP0_ACLKR.SPI2_CLK */ |
| 371 |
AM62PX_IOPAD(0x0194, PIN_OUTPUT, 1) /* (D25) MCASP0_AXR3.SPI2_D0 */ |
| 372 |
AM62PX_IOPAD(0x0198, PIN_INPUT, 1) /* (E25) MCASP0_AXR2.SPI2_D1 */ |
| 373 |
AM62PX_IOPAD(0x01ac, PIN_OUTPUT, 7) /* (G23) MCASP0_AFSR.GPIO1_13 */ |
| 374 |
>; |
| 375 |
}; |
| 376 |
|
| 377 |
pinctrl_uart0: main-uart0-default-pins { |
| 378 |
pinctrl-single,pins = < |
| 379 |
AM62PX_IOPAD(0x1c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ |
| 380 |
AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ |
| 381 |
>; |
| 382 |
bootph-all; |
| 383 |
}; |
| 384 |
|
| 385 |
pinctrl_uart2: main-uart2-default-pins { |
| 386 |
pinctrl-single,pins = < |
| 387 |
AM62PX_IOPAD(0x005c, PIN_INPUT_PULLUP, 2) /* (AC25) GPMC0_AD8.UART2_RXD */ |
| 388 |
AM62PX_IOPAD(0x0060, PIN_OUTPUT, 2) /* (AB25) GPMC0_AD9.UART2_TXD */ |
| 389 |
>; |
| 390 |
}; |
| 391 |
|
| 392 |
pinctrl_uart6: main-uart6-default-pins { |
| 393 |
pinctrl-single,pins = < |
| 394 |
AM62PX_IOPAD(0x009c, PIN_INPUT_PULLUP, 3) /* (AD24) GPMC0_WAIT1.UART6_RXD */ |
| 395 |
AM62PX_IOPAD(0x0244, PIN_OUTPUT, 1) /* (D24) MMC1_SDWP.UART6_TXD */ |
| 396 |
>; |
| 397 |
}; |
| 398 |
|
| 399 |
pinctrl_usb1: main-usb1-default-pins { |
| 400 |
pinctrl-single,pins = < |
| 401 |
AM62PX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (G21) USB1_DRVVBUS */ |
| 402 |
>; |
| 403 |
}; |
| 404 |
|
| 405 |
pinctrl_ov5640: main-ov5640-pins { |
| 406 |
pinctrl-single,pins = < |
| 407 |
AM62PX_IOPAD(0x0028, PIN_OUTPUT, 7) /* (N20) OSPI0_D7.GPIO0_10 */ |
| 408 |
AM62PX_IOPAD(0x0054, PIN_OUTPUT, 7) /* (V24) GPMC0_AD6.GPIO0_21 */ |
| 409 |
AM62PX_IOPAD(0x0058, PIN_OUTPUT, 7) /* (W25) GPMC0_AD7.GPIO0_22 */ |
| 410 |
>; |
| 411 |
}; |
| 412 |
|
| 413 |
pinctrl_pca9534: main-pca9534-pins { |
| 414 |
pinctrl-single,pins = < |
| 415 |
AM62PX_IOPAD(0x01f0, PIN_INPUT, 7) /* (C25) EXT_REFCLK1.GPIO1_30 */ |
| 416 |
>; |
| 417 |
}; |
| 418 |
|
| 419 |
pinctrl_sd1_vmmc: main-sd1-vmmc-pins { |
| 420 |
pinctrl-single,pins = < |
| 421 |
AM62PX_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AC24) GPMC0_AD15.GPIO0_30 */ |
| 422 |
AM62PX_IOPAD(0x00d8, PIN_OUTPUT, 7) /* (AE22) VOUT0_DATA8.GPIO0_53 */ |
| 423 |
>; |
| 424 |
bootph-all; |
| 425 |
}; |
| 426 |
|
| 427 |
pinctrl_sd1_vqmmc: main-sd1-vqmmc-pins { |
| 428 |
pinctrl-single,pins = < |
| 429 |
AM62PX_IOPAD(0x00e4, PIN_OUTPUT, 7) /* (AE21) VOUT0_DATA11.GPIO0_56 */ |
| 430 |
>; |
| 431 |
bootph-all; |
| 432 |
}; |
| 433 |
}; |
| 434 |
|
| 435 |
&main_spi2 { |
| 436 |
pinctrl-names = "default"; |
| 437 |
pinctrl-0 = <&pinctrl_spi2>; |
| 438 |
ti,pindir-d0-out-d1-in; |
| 439 |
cs-gpios = <&main_gpio1 13 GPIO_ACTIVE_HIGH>; |
| 440 |
status = "okay"; |
| 441 |
}; |
| 442 |
|
| 443 |
&main_uart0 { |
| 444 |
pinctrl-names = "default"; |
| 445 |
pinctrl-0 = <&pinctrl_uart0>; |
| 446 |
status = "okay"; |
| 447 |
}; |
| 448 |
|
| 449 |
&main_uart2 { |
| 450 |
pinctrl-names = "default"; |
| 451 |
pinctrl-0 = <&pinctrl_uart2>; |
| 452 |
status = "okay"; |
| 453 |
}; |
| 454 |
|
| 455 |
&main_uart6 { |
| 456 |
pinctrl-names = "default"; |
| 457 |
pinctrl-0 = <&pinctrl_uart6>; |
| 458 |
status = "okay"; |
| 459 |
}; |
| 460 |
|
| 461 |
&sdhci1 { |
| 462 |
/* SD Card */ |
| 463 |
vmmc-supply = <®_sdhc1_vmmc>; |
| 464 |
vqmmc-supply = <®_sdhc1_vqmmc>; |
| 465 |
pinctrl-names = "default"; |
| 466 |
pinctrl-0 = <&pinctrl_mmc1>; |
| 467 |
disable-wp; |
| 468 |
bootph-all; |
| 469 |
status = "okay"; |
| 470 |
}; |
| 471 |
|
| 472 |
&ti_csi2rx0 { |
| 473 |
status = "okay"; |
| 474 |
}; |
| 475 |
|
| 476 |
&usb0 { |
| 477 |
usb-role-switch; |
| 478 |
status = "okay"; |
| 479 |
|
| 480 |
port { |
| 481 |
typec_hs: endpoint { |
| 482 |
remote-endpoint = <&usb_con_hs>; |
| 483 |
}; |
| 484 |
}; |
| 485 |
}; |
| 486 |
|
| 487 |
&usb1 { |
| 488 |
dr_mode = "host"; |
| 489 |
pinctrl-names = "default"; |
| 490 |
pinctrl-0 = <&pinctrl_usb1>; |
| 491 |
status = "okay"; |
| 492 |
}; |
| 493 |
|
| 494 |
&usbss0 { |
| 495 |
status = "okay"; |
| 496 |
}; |
| 497 |
|
| 498 |
&usbss1 { |
| 499 |
status = "okay"; |
| 500 |
}; |