Debian Codegraph @

scripts/dtc/include-prefixes/arm64/ti/k3-am62p-verdin-ivy.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /*
3 * Copyright 2025 Toradex
4 *
5 * Common dtsi for Verdin AM62P SoM on Ivy carrier board
6 *
7 * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
8 * https://www.toradex.com/products/carrier-board/ivy-carrier-board
9 */
10
11 #include <dt-bindings/mux/mux.h>
12 #include <dt-bindings/leds/common.h>
13 #include <dt-bindings/net/ti-dp83867.h>
14
15 / {
16 aliases {
17 eeprom1 = &carrier_eeprom;
18 };
19
20 /* AIN1 Voltage w/o AIN1_MODE gpio control */
21 ain1_voltage_unmanaged: voltage-divider-ain1 {
22 compatible = "voltage-divider";
23 #io-channel-cells = <1>;
24 io-channels = <&ivy_adc1 0>;
25 full-ohms = <19>;
26 output-ohms = <1>;
27 };
28
29 /* AIN1 Current w/o AIN1_MODE gpio control */
30 ain1_current_unmanaged: current-sense-shunt-ain1 {
31 compatible = "current-sense-shunt";
32 #io-channel-cells = <0>;
33 io-channels = <&ivy_adc1 1>;
34 shunt-resistor-micro-ohms = <100000000>;
35 };
36
37 /* AIN1_MODE - SODIMM 216 */
38 ain1_mode_mux_ctrl: mux-controller-0 {
39 compatible = "gpio-mux";
40 pinctrl-names = "default";
41 pinctrl-0 = <&pinctrl_gpio_5>;
42 #mux-control-cells = <0>;
43 mux-gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
44 };
45
46 ain1-voltage {
47 compatible = "io-channel-mux";
48 channels = "ain1_voltage", "";
49 io-channels = <&ain1_voltage_unmanaged 0>;
50 io-channel-names = "parent";
51 mux-controls = <&ain1_mode_mux_ctrl>;
52 settle-time-us = <1000>;
53 };
54
55 ain1-current {
56 compatible = "io-channel-mux";
57 channels = "", "ain1_current";
58 io-channels = <&ain1_current_unmanaged>;
59 io-channel-names = "parent";
60 mux-controls = <&ain1_mode_mux_ctrl>;
61 settle-time-us = <1000>;
62 };
63
64 /* AIN2 Voltage w/o AIN2_MODE gpio control */
65 ain2_voltage_unmanaged: voltage-divider-ain2 {
66 compatible = "voltage-divider";
67 #io-channel-cells = <1>;
68 io-channels = <&ivy_adc2 0>;
69 full-ohms = <19>;
70 output-ohms = <1>;
71 };
72
73 /* AIN2 Current w/o AIN2_MODE gpio control */
74 ain2_current_unmanaged: current-sense-shunt-ain2 {
75 compatible = "current-sense-shunt";
76 #io-channel-cells = <0>;
77 io-channels = <&ivy_adc2 1>;
78 shunt-resistor-micro-ohms = <100000000>;
79 };
80
81 /* AIN2_MODE - SODIMM 218 */
82 ain2_mode_mux_ctrl: mux-controller-1 {
83 compatible = "gpio-mux";
84 pinctrl-names = "default";
85 pinctrl-0 = <&pinctrl_gpio_6>;
86 #mux-control-cells = <0>;
87 mux-gpios = <&main_gpio0 50 GPIO_ACTIVE_HIGH>;
88 };
89
90 ain2-voltage {
91 compatible = "io-channel-mux";
92 channels = "ain2_voltage", "";
93 io-channels = <&ain2_voltage_unmanaged 0>;
94 io-channel-names = "parent";
95 mux-controls = <&ain2_mode_mux_ctrl>;
96 settle-time-us = <1000>;
97 };
98
99 ain2-current {
100 compatible = "io-channel-mux";
101 channels = "", "ain2_current";
102 io-channels = <&ain2_current_unmanaged>;
103 io-channel-names = "parent";
104 mux-controls = <&ain2_mode_mux_ctrl>;
105 settle-time-us = <1000>;
106 };
107
108 leds {
109 compatible = "gpio-leds";
110 pinctrl-names = "default";
111 pinctrl-0 = <&pinctrl_ivy_leds>;
112
113 /* D7 Blue - SODIMM 30 - LEDs.GPIO1 */
114 led-0 {
115 color = <LED_COLOR_ID_BLUE>;
116 default-state = "off";
117 function = LED_FUNCTION_STATUS;
118 function-enumerator = <1>;
119 gpios = <&main_gpio1 11 GPIO_ACTIVE_HIGH>;
120 };
121
122 /* D7 Green - SODIMM 32 - LEDs.GPIO2 */
123 led-1 {
124 color = <LED_COLOR_ID_GREEN>;
125 default-state = "off";
126 function = LED_FUNCTION_STATUS;
127 function-enumerator = <1>;
128 gpios = <&main_gpio1 12 GPIO_ACTIVE_HIGH>;
129 };
130
131 /* D7 Red - SODIMM 34 - LEDs.GPIO3 */
132 led-2 {
133 color = <LED_COLOR_ID_RED>;
134 default-state = "off";
135 function = LED_FUNCTION_STATUS;
136 function-enumerator = <1>;
137 gpios = <&main_gpio1 10 GPIO_ACTIVE_HIGH>;
138 };
139
140 /* D8 Blue - SODIMM 36 - LEDs.GPIO4 */
141 led-3 {
142 color = <LED_COLOR_ID_BLUE>;
143 default-state = "off";
144 function = LED_FUNCTION_STATUS;
145 function-enumerator = <2>;
146 gpios = <&main_gpio1 9 GPIO_ACTIVE_HIGH>;
147 };
148
149 /* D8 Green - SODIMM 54 - LEDs.GPIO5 */
150 led-4 {
151 color = <LED_COLOR_ID_GREEN>;
152 default-state = "off";
153 function = LED_FUNCTION_STATUS;
154 function-enumerator = <2>;
155 gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
156 };
157
158 /* D8 Red - SODIMM 44 - LEDs.GPIO6 */
159 led-5 {
160 color = <LED_COLOR_ID_RED>;
161 default-state = "off";
162 function = LED_FUNCTION_STATUS;
163 function-enumerator = <2>;
164 gpios = <&main_gpio0 37 GPIO_ACTIVE_HIGH>;
165 };
166
167 /* D9 Blue - SODIMM 46 - LEDs.GPIO7 */
168 led-6 {
169 color = <LED_COLOR_ID_BLUE>;
170 default-state = "off";
171 function = LED_FUNCTION_STATUS;
172 function-enumerator = <3>;
173 gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>;
174 };
175
176 /* D9 Red - SODIMM 48 - LEDs.GPIO8 */
177 led-7 {
178 color = <LED_COLOR_ID_RED>;
179 default-state = "off";
180 function = LED_FUNCTION_STATUS;
181 function-enumerator = <3>;
182 gpios = <&main_gpio0 33 GPIO_ACTIVE_HIGH>;
183 };
184 };
185
186 reg_3v2_ain1: regulator-3v2-ain1 {
187 compatible = "regulator-fixed";
188 regulator-max-microvolt = <3200000>;
189 regulator-min-microvolt = <3200000>;
190 regulator-name = "+3V2_AIN1";
191 };
192
193 reg_3v2_ain2: regulator-3v2-ain2 {
194 compatible = "regulator-fixed";
195 regulator-max-microvolt = <3200000>;
196 regulator-min-microvolt = <3200000>;
197 regulator-name = "+3V2_AIN2";
198 };
199
200 /* Ivy Power Supply Input Voltage */
201 ivy-input-voltage {
202 compatible = "voltage-divider";
203 /* Verdin ADC_1 */
204 io-channels = <&som_adc 7>;
205 full-ohms = <204700>; /* 200K + 4.7K */
206 output-ohms = <4700>;
207 };
208
209 ivy-5v-voltage {
210 compatible = "voltage-divider";
211 /* Verdin ADC_2 */
212 io-channels = <&som_adc 6>;
213 full-ohms = <39000>; /* 27K + 12K */
214 output-ohms = <12000>;
215 };
216
217 ivy-3v3-voltage {
218 compatible = "voltage-divider";
219 /* Verdin ADC_3 */
220 io-channels = <&som_adc 5>;
221 full-ohms = <54000>; /* 27K + 27K */
222 output-ohms = <27000>;
223 };
224
225 ivy-1v8-voltage {
226 compatible = "voltage-divider";
227 /* Verdin ADC_4 */
228 io-channels = <&som_adc 4>;
229 full-ohms = <39000>; /* 12K + 27K */
230 output-ohms = <27000>;
231 };
232 };
233
234 &main_pmx0 {
235 pinctrl_ivy_leds: ivy-leds-default-pins {
236 pinctrl-single,pins = <
237 AM62PX_IOPAD(0x019c, PIN_INPUT, 7) /* (E24) MCASP0_AXR1.GPIO1_9 */ /* SODIMM 36 */
238 AM62PX_IOPAD(0x01a0, PIN_INPUT, 7) /* (F23) MCASP0_AXR0.GPIO1_10 */ /* SODIMM 34 */
239 AM62PX_IOPAD(0x01a4, PIN_INPUT, 7) /* (F24) MCASP0_ACLKX.GPIO1_11 */ /* SODIMM 30 */
240 AM62PX_IOPAD(0x01a8, PIN_INPUT, 7) /* (F25) MCASP0_AFSX.GPIO1_12 */ /* SODIMM 32 */
241 AM62PX_IOPAD(0x0088, PIN_INPUT, 7) /* (R24) GPMC0_OEn_REn.GPIO0_33 */ /* SODIMM 48 */
242 AM62PX_IOPAD(0x0098, PIN_INPUT, 7) /* (AA24) GPMC0_WAIT0.GPIO0_37 */ /* SODIMM 44 */
243 AM62PX_IOPAD(0x008c, PIN_INPUT, 7) /* (T25) GPMC0_WEn.GPIO0_34 */ /* SODIMM 46 */
244 AM62PX_IOPAD(0x002c, PIN_INPUT, 7) /* (M25) OSPI0_CSn0.GPIO0_11 */ /* SODIMM 54 */
245 >;
246 };
247 };
248
249 /* Verdin ETHs */
250 &cpsw3g {
251 pinctrl-names = "default";
252 pinctrl-0 = <&pinctrl_rgmii1>, <&pinctrl_rgmii2>;
253 status = "okay";
254 };
255
256 /* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
257 &cpsw3g_mdio {
258 status = "okay";
259
260 carrier_eth_phy: ethernet-phy@2 {
261 reg = <2>;
262 pinctrl-names = "default";
263 pinctrl-0 = <&pinctrl_eth2_rgmii_int>;
264 interrupt-parent = <&main_gpio0>;
265 interrupts = <42 IRQ_TYPE_EDGE_FALLING>;
266 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
267 };
268 };
269
270 /* Verdin ETH_1 (On-module PHY) */
271 &cpsw_port1 {
272 status = "okay";
273 };
274
275 /* Verdin ETH_2_RGMII */
276 &cpsw_port2 {
277 phy-handle = <&carrier_eth_phy>;
278 phy-mode = "rgmii-id";
279 status = "okay";
280 };
281
282 &main_gpio0 {
283 pinctrl-names = "default";
284 pinctrl-0 = <&pinctrl_pcie_1_reset>,
285 <&pinctrl_qspi1_cs2_gpio>,
286 <&pinctrl_qspi1_dqs_gpio>,
287 <&pinctrl_qspi1_io0_gpio>,
288 <&pinctrl_qspi1_io1_gpio>,
289 <&pinctrl_qspi1_io2_gpio>,
290 <&pinctrl_qspi1_io3_gpio>;
291 gpio-line-names =
292 "", /* 0 */
293 "",
294 "REL4", /* SODIMM 66 */
295 "DIGI_1", /* SODIMM 56 */
296 "DIGI_2", /* SODIMM 58 */
297 "REL1", /* SODIMM 60 */
298 "REL2", /* SODIMM 62 */
299 "",
300 "",
301 "",
302 "", /* 10 */
303 "",
304 "REL3", /* SODIMM 64 */
305 "",
306 "",
307 "",
308 "",
309 "",
310 "",
311 "",
312 "", /* 20 */
313 "",
314 "",
315 "",
316 "",
317 "",
318 "",
319 "",
320 "",
321 "",
322 "", /* 30 */
323 "",
324 "",
325 "",
326 "",
327 "",
328 "",
329 "",
330 "",
331 "",
332 "", /* 40 */
333 "",
334 "",
335 "",
336 "",
337 "",
338 "",
339 "",
340 "",
341 "",
342 "", /* 50 */
343 "",
344 "",
345 "",
346 "",
347 "",
348 "",
349 "",
350 "",
351 "",
352 "", /* 60 */
353 "",
354 "",
355 "",
356 "",
357 "",
358 "",
359 "",
360 "",
361 "",
362 "", /* 70 */
363 "",
364 "",
365 "",
366 "",
367 "",
368 "",
369 "",
370 "",
371 "",
372 "", /* 80 */
373 "",
374 "",
375 "",
376 "",
377 "",
378 "",
379 "",
380 "",
381 "",
382 "", /* 90 */
383 "";
384 };
385
386 &main_gpio1 {
387 gpio-line-names =
388 "", /* 0 */
389 "",
390 "",
391 "",
392 "",
393 "",
394 "",
395 "",
396 "",
397 "",
398 "", /* 10 */
399 "",
400 "",
401 "",
402 "",
403 "",
404 "",
405 "",
406 "",
407 "",
408 "", /* 20 */
409 "",
410 "",
411 "",
412 "",
413 "",
414 "",
415 "",
416 "",
417 "",
418 "", /* 30 */
419 "",
420 "",
421 "",
422 "",
423 "",
424 "",
425 "",
426 "",
427 "",
428 "", /* 40 */
429 "",
430 "",
431 "",
432 "",
433 "",
434 "",
435 "",
436 "",
437 "",
438 "", /* 50 */
439 "";
440 };
441
442 /* Verdin I2C_1 */
443 &main_i2c0 {
444 status = "okay";
445
446 temperature-sensor@4f {
447 compatible = "ti,tmp1075";
448 reg = <0x4f>;
449 };
450
451 carrier_eeprom: eeprom@57 {
452 compatible = "st,24c02", "atmel,24c02";
453 reg = <0x57>;
454 pagesize = <16>;
455 };
456 };
457
458 /* Verdin I2C_4_CSI */
459 &main_i2c3 {
460 status = "okay";
461
462 ivy_adc1: adc@40 {
463 compatible = "ti,ads1119";
464 reg = <0x40>;
465 pinctrl-names = "default";
466 pinctrl-0 = <&pinctrl_gpio_7>;
467 interrupt-parent = <&main_gpio0>;
468 interrupts = <51 IRQ_TYPE_EDGE_FALLING>;
469 avdd-supply = <&reg_3v2_ain1>;
470 dvdd-supply = <&reg_3v2_ain1>;
471 vref-supply = <&reg_3v2_ain1>;
472 #address-cells = <1>;
473 #io-channel-cells = <1>;
474 #size-cells = <0>;
475
476 /* AIN1 0-33V Voltage Input */
477 channel@0 {
478 reg = <0>;
479 diff-channels = <0 1>;
480 };
481
482 /* AIN1 0-20mA Current Input */
483 channel@1 {
484 reg = <1>;
485 diff-channels = <2 3>;
486 };
487 };
488
489 ivy_adc2: adc@41 {
490 compatible = "ti,ads1119";
491 reg = <0x41>;
492 pinctrl-names = "default";
493 pinctrl-0 = <&pinctrl_gpio_8>;
494 interrupt-parent = <&main_gpio0>;
495 interrupts = <52 IRQ_TYPE_EDGE_FALLING>;
496 avdd-supply = <&reg_3v2_ain2>;
497 dvdd-supply = <&reg_3v2_ain2>;
498 vref-supply = <&reg_3v2_ain2>;
499 #address-cells = <1>;
500 #io-channel-cells = <1>;
501 #size-cells = <0>;
502
503 /* AIN2 0-33V Voltage Input */
504 channel@0 {
505 reg = <0>;
506 diff-channels = <0 1>;
507 };
508
509 /* AIN2 0-20mA Current Input */
510 channel@1 {
511 reg = <1>;
512 diff-channels = <2 3>;
513 };
514 };
515 };
516
517 /* Verdin CAN_1 */
518 &main_mcan0 {
519 status = "okay";
520 };
521
522 /* Verdin SPI_1 */
523 &main_spi1 {
524 pinctrl-0 = <&pinctrl_main_spi1>,
525 <&pinctrl_main_spi1_cs0>,
526 <&pinctrl_gpio_1>,
527 <&pinctrl_gpio_4>;
528 cs-gpios = <0>,
529 <&mcu_gpio0 1 GPIO_ACTIVE_LOW>,
530 <&mcu_gpio0 4 GPIO_ACTIVE_LOW>;
531 status = "okay";
532
533 tpm@1 {
534 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
535 reg = <1>;
536 spi-max-frequency = <18500000>;
537 };
538
539 fram@2 {
540 compatible = "fujitsu,mb85rs256", "atmel,at25";
541 reg = <2>;
542 address-width = <16>;
543 size = <32768>;
544 spi-max-frequency = <33000000>;
545 pagesize = <1>;
546 };
547 };
548
549 /* Verdin UART_3, used as the Linux console */
550 &main_uart0 {
551 status = "okay";
552 };
553
554 /* Verdin UART_1 */
555 &main_uart1 {
556 status = "okay";
557 };
558
559 &mcu_gpio0 {
560 pinctrl-names = "default";
561 pinctrl-0 = <&pinctrl_gpio_2>,
562 <&pinctrl_gpio_3>;
563 gpio-line-names =
564 "",
565 "",
566 "GPIO2", /* Verdin GPIO_2 - SODIMM 208 */
567 "GPIO3", /* Verdin GPIO_3 - SODIMM 210 */
568 "",
569 "",
570 "",
571 "",
572 "",
573 "",
574 "", /* 10 */
575 "",
576 "",
577 "",
578 "",
579 "",
580 "",
581 "",
582 "",
583 "",
584 "", /* 20 */
585 "",
586 "",
587 "";
588 };
589
590 /* Verdin CAN_2 */
591 &mcu_mcan0 {
592 status = "okay";
593 };
594
595 /* Verdin SD_1 */
596 &sdhci1 {
597 status = "okay";
598 };
599
600 /* Verdin USB_1 */
601 &usbss0 {
602 status = "okay";
603 };
604
605 &usb0 {
606 status = "okay";
607 };
608
609 /* Verdin USB_2 */
610 &usbss1 {
611 status = "okay";
612 };
613
614 &usb1 {
615 status = "okay";
616 };
617
618 /* Verdin PCIE_1_RESET# */
619 &verdin_pcie_1_reset_hog {
620 status = "okay";
621 };
622
623 /* Verdin UART_2 */
624 &wkup_uart0 {
625 rs485-rts-active-low;
626 rs485-rx-during-tx;
627 linux,rs485-enabled-at-boot-time;
628 status = "okay";
629 };