| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR MIT |
| 2 |
/* |
| 3 |
* Device Tree file for the MCU domain peripherals shared by AM62P and J722S |
| 4 |
* |
| 5 |
* Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ |
| 6 |
*/ |
| 7 |
|
| 8 |
&cbass_mcu { |
| 9 |
mcu_pmx0: pinctrl@4084000 { |
| 10 |
compatible = "pinctrl-single"; |
| 11 |
reg = <0x00 0x04084000 0x00 0x88>; |
| 12 |
#pinctrl-cells = <1>; |
| 13 |
pinctrl-single,register-width = <32>; |
| 14 |
pinctrl-single,function-mask = <0xffffffff>; |
| 15 |
bootph-all; |
| 16 |
}; |
| 17 |
|
| 18 |
mcu_esm: esm@4100000 { |
| 19 |
compatible = "ti,j721e-esm"; |
| 20 |
reg = <0x00 0x4100000 0x00 0x1000>; |
| 21 |
bootph-pre-ram; |
| 22 |
/* Interrupt sources: esm0_cfg, esm0_hi, esm0_low, mrti0, wrti0 */ |
| 23 |
ti,esm-pins = <0>, <1>, <2>, <85>, <86>; |
| 24 |
}; |
| 25 |
|
| 26 |
/* |
| 27 |
* The MCU domain timer interrupts are routed only to the ESM module, |
| 28 |
* and not currently available for Linux. The MCU domain timers are |
| 29 |
* of limited use without interrupts, and likely reserved by the ESM. |
| 30 |
*/ |
| 31 |
mcu_timer0: timer@4800000 { |
| 32 |
compatible = "ti,am654-timer"; |
| 33 |
reg = <0x00 0x4800000 0x00 0x400>; |
| 34 |
clocks = <&k3_clks 35 2>; |
| 35 |
clock-names = "fck"; |
| 36 |
power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; |
| 37 |
ti,timer-pwm; |
| 38 |
status = "reserved"; |
| 39 |
}; |
| 40 |
|
| 41 |
mcu_timer1: timer@4810000 { |
| 42 |
compatible = "ti,am654-timer"; |
| 43 |
reg = <0x00 0x4810000 0x00 0x400>; |
| 44 |
clocks = <&k3_clks 48 2>; |
| 45 |
clock-names = "fck"; |
| 46 |
power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; |
| 47 |
ti,timer-pwm; |
| 48 |
status = "reserved"; |
| 49 |
}; |
| 50 |
|
| 51 |
mcu_timer2: timer@4820000 { |
| 52 |
compatible = "ti,am654-timer"; |
| 53 |
reg = <0x00 0x4820000 0x00 0x400>; |
| 54 |
clocks = <&k3_clks 49 2>; |
| 55 |
clock-names = "fck"; |
| 56 |
power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; |
| 57 |
ti,timer-pwm; |
| 58 |
status = "reserved"; |
| 59 |
}; |
| 60 |
|
| 61 |
mcu_timer3: timer@4830000 { |
| 62 |
compatible = "ti,am654-timer"; |
| 63 |
reg = <0x00 0x4830000 0x00 0x400>; |
| 64 |
clocks = <&k3_clks 50 2>; |
| 65 |
clock-names = "fck"; |
| 66 |
power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; |
| 67 |
ti,timer-pwm; |
| 68 |
status = "reserved"; |
| 69 |
}; |
| 70 |
|
| 71 |
mcu_uart0: serial@4a00000 { |
| 72 |
compatible = "ti,am64-uart", "ti,am654-uart"; |
| 73 |
reg = <0x00 0x04a00000 0x00 0x100>; |
| 74 |
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; |
| 75 |
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; |
| 76 |
clocks = <&k3_clks 149 0>; |
| 77 |
clock-names = "fclk"; |
| 78 |
status = "disabled"; |
| 79 |
}; |
| 80 |
|
| 81 |
mcu_i2c0: i2c@4900000 { |
| 82 |
compatible = "ti,am64-i2c", "ti,omap4-i2c"; |
| 83 |
reg = <0x00 0x04900000 0x00 0x100>; |
| 84 |
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| 85 |
#address-cells = <1>; |
| 86 |
#size-cells = <0>; |
| 87 |
power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; |
| 88 |
clocks = <&k3_clks 106 2>; |
| 89 |
clock-names = "fck"; |
| 90 |
status = "disabled"; |
| 91 |
}; |
| 92 |
|
| 93 |
mcu_spi0: spi@4b00000 { |
| 94 |
compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; |
| 95 |
reg = <0x00 0x04b00000 0x00 0x400>; |
| 96 |
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; |
| 97 |
#address-cells = <1>; |
| 98 |
#size-cells = <0>; |
| 99 |
power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; |
| 100 |
clocks = <&k3_clks 147 0>; |
| 101 |
status = "disabled"; |
| 102 |
}; |
| 103 |
|
| 104 |
mcu_spi1: spi@4b10000 { |
| 105 |
compatible = "ti,am654-mcspi","ti,omap4-mcspi"; |
| 106 |
reg = <0x00 0x04b10000 0x00 0x400>; |
| 107 |
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; |
| 108 |
#address-cells = <1>; |
| 109 |
#size-cells = <0>; |
| 110 |
power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; |
| 111 |
clocks = <&k3_clks 148 0>; |
| 112 |
status = "disabled"; |
| 113 |
}; |
| 114 |
|
| 115 |
mcu_gpio_intr: interrupt-controller@4210000 { |
| 116 |
compatible = "ti,sci-intr"; |
| 117 |
reg = <0x00 0x04210000 0x00 0x200>; |
| 118 |
ti,intr-trigger-type = <1>; |
| 119 |
interrupt-controller; |
| 120 |
interrupt-parent = <&gic500>; |
| 121 |
#interrupt-cells = <1>; |
| 122 |
ti,sci = <&dmsc>; |
| 123 |
ti,sci-dev-id = <5>; |
| 124 |
ti,interrupt-ranges = <0 104 4>; |
| 125 |
}; |
| 126 |
|
| 127 |
mcu_gpio0: gpio@4201000 { |
| 128 |
compatible = "ti,am64-gpio", "ti,keystone-gpio"; |
| 129 |
reg = <0x00 0x4201000 0x00 0x100>; |
| 130 |
gpio-controller; |
| 131 |
#gpio-cells = <2>; |
| 132 |
interrupt-parent = <&mcu_gpio_intr>; |
| 133 |
interrupts = <30>, <31>; |
| 134 |
interrupt-controller; |
| 135 |
#interrupt-cells = <2>; |
| 136 |
ti,ngpio = <24>; |
| 137 |
ti,davinci-gpio-unbanked = <0>; |
| 138 |
power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; |
| 139 |
clocks = <&k3_clks 79 0>; |
| 140 |
clock-names = "gpio"; |
| 141 |
gpio-ranges = <&mcu_pmx0 0 0 21>, <&mcu_pmx0 21 23 1>, |
| 142 |
<&mcu_pmx0 22 32 2>; |
| 143 |
}; |
| 144 |
|
| 145 |
mcu_rti0: watchdog@4880000 { |
| 146 |
compatible = "ti,j7-rti-wdt"; |
| 147 |
reg = <0x00 0x04880000 0x00 0x100>; |
| 148 |
clocks = <&k3_clks 131 0>; |
| 149 |
power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; |
| 150 |
assigned-clocks = <&k3_clks 131 0>; |
| 151 |
assigned-clock-parents = <&k3_clks 131 2>; |
| 152 |
/* Tightly coupled to M4F */ |
| 153 |
status = "reserved"; |
| 154 |
}; |
| 155 |
|
| 156 |
mcu_mcan0: can@4e08000 { |
| 157 |
compatible = "bosch,m_can"; |
| 158 |
reg = <0x00 0x4e08000 0x00 0x200>, |
| 159 |
<0x00 0x4e00000 0x00 0x8000>; |
| 160 |
reg-names = "m_can", "message_ram"; |
| 161 |
power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>; |
| 162 |
clocks = <&k3_clks 188 6>, <&k3_clks 188 1>; |
| 163 |
clock-names = "hclk", "cclk"; |
| 164 |
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; |
| 165 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, |
| 166 |
<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 167 |
interrupt-names = "int0", "int1"; |
| 168 |
status = "disabled"; |
| 169 |
}; |
| 170 |
|
| 171 |
mcu_mcan1: can@4e18000 { |
| 172 |
compatible = "bosch,m_can"; |
| 173 |
reg = <0x00 0x4e18000 0x00 0x200>, |
| 174 |
<0x00 0x4e10000 0x00 0x8000>; |
| 175 |
reg-names = "m_can", "message_ram"; |
| 176 |
power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>; |
| 177 |
clocks = <&k3_clks 189 6>, <&k3_clks 189 1>; |
| 178 |
clock-names = "hclk", "cclk"; |
| 179 |
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; |
| 180 |
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, |
| 181 |
<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 182 |
interrupt-names = "int0", "int1"; |
| 183 |
status = "disabled"; |
| 184 |
}; |
| 185 |
|
| 186 |
mcu_r5fss0: r5fss@79000000 { |
| 187 |
compatible = "ti,am62-r5fss"; |
| 188 |
#address-cells = <1>; |
| 189 |
#size-cells = <1>; |
| 190 |
ranges = <0x79000000 0x00 0x79000000 0x8000>, |
| 191 |
<0x79020000 0x00 0x79020000 0x8000>; |
| 192 |
power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>; |
| 193 |
status = "disabled"; |
| 194 |
|
| 195 |
mcu_r5fss0_core0: r5f@79000000 { |
| 196 |
compatible = "ti,am62-r5f"; |
| 197 |
reg = <0x79000000 0x00008000>, |
| 198 |
<0x79020000 0x00008000>; |
| 199 |
reg-names = "atcm", "btcm"; |
| 200 |
ti,sci = <&dmsc>; |
| 201 |
ti,sci-dev-id = <9>; |
| 202 |
ti,sci-proc-ids = <0x03 0xff>; |
| 203 |
resets = <&k3_reset 9 1>; |
| 204 |
firmware-name = "am62p-mcu-r5f0_0-fw"; |
| 205 |
ti,atcm-enable = <0>; |
| 206 |
ti,btcm-enable = <1>; |
| 207 |
ti,loczrama = <0>; |
| 208 |
status = "disabled"; |
| 209 |
}; |
| 210 |
}; |
| 211 |
}; |