Debian Codegraph @

scripts/dtc/include-prefixes/arm64/ti/k3-am62l-wakeup.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0-only or MIT
2 /*
3 * Device Tree file for the AM62L wakeup domain peripherals
4 * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
5 *
6 * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4
7 */
8
9 #include <dt-bindings/bus/ti-sysc.h>
10
11 &cbass_wakeup {
12 vtm0: temperature-sensor@b00000 {
13 compatible = "ti,j7200-vtm";
14 reg = <0x00 0xb00000 0x00 0x400>,
15 <0x00 0xb01000 0x00 0x400>;
16 power-domains = <&scmi_pds 46>;
17 #thermal-sensor-cells = <1>;
18 };
19
20 pmx0: pinctrl@4084000 {
21 compatible = "ti,am62l-padconf", "pinctrl-single";
22 reg = <0x00 0x4084000 0x00 0x24c>;
23 pinctrl-single,register-width = <32>;
24 pinctrl-single,function-mask = <0xffffffff>;
25 #pinctrl-cells = <1>;
26 };
27
28 wkup_gpio0: gpio@4201000 {
29 compatible = "ti,am64-gpio", "ti,keystone-gpio";
30 reg = <0x00 0x04201000 0x00 0x100>;
31 gpio-controller;
32 #gpio-cells = <2>;
33 interrupt-parent = <&gic500>;
34 interrupts = <GIC_SPI 276 IRQ_TYPE_EDGE_RISING>,
35 <GIC_SPI 704 IRQ_TYPE_EDGE_RISING>,
36 <GIC_SPI 705 IRQ_TYPE_EDGE_RISING>,
37 <GIC_SPI 706 IRQ_TYPE_EDGE_RISING>,
38 <GIC_SPI 707 IRQ_TYPE_EDGE_RISING>,
39 <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>,
40 <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>,
41 <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>;
42 interrupt-controller;
43 #interrupt-cells = <2>;
44 power-domains = <&scmi_pds 36>;
45 clocks = <&scmi_clk 146>;
46 clock-names = "gpio";
47 ti,ngpio = <7>;
48 ti,davinci-gpio-unbanked = <0>;
49 status = "disabled";
50 };
51
52 wkup_timer0: timer@2b100000 {
53 compatible = "ti,am654-timer";
54 reg = <0x00 0x2b100000 0x00 0x400>;
55 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
56 clocks = <&scmi_clk 93>;
57 clock-names = "fck";
58 power-domains = <&scmi_pds 19>;
59 ti,timer-pwm;
60 };
61
62 wkup_timer1: timer@2b110000 {
63 compatible = "ti,am654-timer";
64 reg = <0x00 0x2b110000 0x00 0x400>;
65 interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
66 clocks = <&scmi_clk 98>;
67 clock-names = "fck";
68 power-domains = <&scmi_pds 20>;
69 ti,timer-pwm;
70 };
71
72 wkup_i2c0: i2c@2b200000 {
73 compatible = "ti,am64-i2c", "ti,omap4-i2c";
74 reg = <0x00 0x2b200000 0x00 0x100>;
75 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
76 #address-cells = <1>;
77 #size-cells = <0>;
78 power-domains = <&scmi_pds 57>;
79 clocks = <&scmi_clk 262>;
80 clock-names = "fck";
81 status = "disabled";
82 };
83
84 target-module@2b300050 {
85 compatible = "ti,sysc-omap2", "ti,sysc";
86 reg = <0x00 0x2b300050 0x00 0x4>,
87 <0x00 0x2b300054 0x00 0x4>,
88 <0x00 0x2b300058 0x00 0x4>;
89 reg-names = "rev", "sysc", "syss";
90 ranges = <0x00 0x00 0x2b300000 0x100000>;
91 #address-cells = <1>;
92 #size-cells = <1>;
93 power-domains = <&scmi_pds 83>;
94 clocks = <&scmi_clk 324>;
95 clock-names = "fck";
96 ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
97 SYSC_OMAP2_SOFTRESET |
98 SYSC_OMAP2_AUTOIDLE)>;
99 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
100 <SYSC_IDLE_NO>,
101 <SYSC_IDLE_SMART>,
102 <SYSC_IDLE_SMART_WKUP>;
103 ti,syss-mask = <1>;
104 ti,no-reset-on-init;
105 status = "disabled";
106
107 wkup_uart0: serial@0 {
108 compatible = "ti,am64-uart", "ti,am654-uart";
109 reg = <0x00 0x100>;
110 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
111 clocks = <&scmi_clk 324>;
112 assigned-clocks = <&scmi_clk 324>;
113 clock-names = "fclk";
114 status = "disabled";
115 };
116 };
117
118 wkup_conf: bus@43000000 {
119 compatible = "simple-bus";
120 ranges = <0x00 0x00 0x43000000 0x80000>;
121 #address-cells = <1>;
122 #size-cells = <1>;
123
124 chipid: chipid@14 {
125 compatible = "ti,am654-chipid";
126 reg = <0x14 0x4>;
127 bootph-all;
128 };
129
130 cpsw_mac_syscon: ethernet-mac-syscon@2000 {
131 compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
132 reg = <0x2000 0x8>;
133 };
134
135 usb_phy_ctrl: syscon@45000 {
136 compatible = "ti,am62-usb-phy-ctrl", "syscon";
137 reg = <0x45000 0x1000>;
138 bootph-all;
139 };
140 };
141 };