Debian Codegraph @

scripts/dtc/include-prefixes/arm64/ti/k3-am62d2-evm.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
2 /*
3 * AM62D2 EVM: https://www.ti.com/lit/zip/sprcal5
4 *
5 * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
6 */
7
8 /dts-v1/;
9
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/net/ti-dp83867.h>
13 #include "k3-am62d2.dtsi"
14
15 / {
16 compatible = "ti,am62d2-evm", "ti,am62d2";
17 model = "Texas Instruments AM62D2 EVM";
18
19 aliases {
20 serial0 = &wkup_uart0;
21 serial1 = &mcu_uart0;
22 serial2 = &main_uart0;
23 mmc0 = &sdhci0;
24 mmc1 = &sdhci1;
25 rtc0 = &wkup_rtc0;
26 ethernet0 = &cpsw_port1;
27 ethernet1 = &cpsw_port2;
28 spi0 = &ospi0;
29 };
30
31 chosen {
32 stdout-path = &main_uart0;
33 };
34
35 memory@80000000 {
36 device_type = "memory";
37 /* 4G RAM */
38 reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
39 <0x00000008 0x80000000 0x00000000 0x80000000>;
40 bootph-all;
41 };
42
43 reserved_memory: reserved-memory {
44 #address-cells = <2>;
45 #size-cells = <2>;
46 ranges;
47
48 /* global cma region */
49 linux,cma {
50 compatible = "shared-dma-pool";
51 reusable;
52 size = <0x00 0x2000000>;
53 alloc-ranges = <0x00 0xc0000000 0x00 0x2000000>;
54 linux,cma-default;
55 };
56
57 secure_tfa_ddr: tfa@80000000 {
58 reg = <0x00 0x80000000 0x00 0x80000>;
59 no-map;
60 };
61
62 wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
63 compatible = "shared-dma-pool";
64 reg = <0x00 0x9c800000 0x00 0x100000>;
65 no-map;
66 };
67
68 wkup_r5fss0_core0_memory_region: memory@9c900000 {
69 compatible = "shared-dma-pool";
70 reg = <0x00 0x9c900000 0x00 0xf00000>;
71 no-map;
72 bootph-pre-ram;
73 };
74
75 secure_ddr: optee@9e800000 {
76 reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
77 no-map;
78 };
79
80 rtos_ipc_memory_region: memory@a0000000 {
81 compatible = "shared-dma-pool";
82 reg = <0x00 0xa0000000 0x00 0x01000000>;
83 no-map;
84 };
85 };
86
87 opp-table {
88 /* Requires VDD_CORE at 0v85 */
89 opp-1400000000 {
90 opp-hz = /bits/ 64 <1400000000>;
91 opp-supported-hw = <0x01 0x0004>;
92 clock-latency-ns = <6000000>;
93 };
94 };
95
96 vout_pd: regulator-0 {
97 /* TPS65988 PD CONTROLLER OUTPUT */
98 compatible = "regulator-fixed";
99 regulator-name = "vout_pd";
100 regulator-min-microvolt = <5000000>;
101 regulator-max-microvolt = <5000000>;
102 regulator-always-on;
103 regulator-boot-on;
104 bootph-all;
105 };
106
107 vmain_pd: regulator-1 {
108 /* Output of TPS22811 */
109 compatible = "regulator-fixed";
110 regulator-name = "vmain_pd";
111 regulator-min-microvolt = <5000000>;
112 regulator-max-microvolt = <5000000>;
113 vin-supply = <&vout_pd>;
114 regulator-always-on;
115 regulator-boot-on;
116 bootph-all;
117 };
118
119 vcc_5v0: regulator-2 {
120 /* Output of TPS630702RNMR */
121 compatible = "regulator-fixed";
122 regulator-name = "vcc_5v0";
123 regulator-min-microvolt = <5000000>;
124 regulator-max-microvolt = <5000000>;
125 vin-supply = <&vmain_pd>;
126 regulator-always-on;
127 regulator-boot-on;
128 bootph-all;
129 };
130
131 vcc_3v3_main: regulator-3 {
132 /* output of LM5141-Q1 */
133 compatible = "regulator-fixed";
134 regulator-name = "vcc_3v3_main";
135 regulator-min-microvolt = <3300000>;
136 regulator-max-microvolt = <3300000>;
137 vin-supply = <&vmain_pd>;
138 regulator-always-on;
139 regulator-boot-on;
140 bootph-all;
141 };
142
143 vdd_mmc1: regulator-4 {
144 /* TPS22918DBVR */
145 compatible = "regulator-fixed";
146 regulator-name = "vdd_mmc1";
147 regulator-min-microvolt = <3300000>;
148 regulator-max-microvolt = <3300000>;
149 vin-supply = <&vcc_3v3_sys>;
150 regulator-boot-on;
151 enable-active-high;
152 gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
153 bootph-all;
154 };
155
156 vcc_3v3_sys: regulator-5 {
157 /* output of TPS222965DSGT */
158 compatible = "regulator-fixed";
159 regulator-name = "vcc_3v3_sys";
160 regulator-min-microvolt = <3300000>;
161 regulator-max-microvolt = <3300000>;
162 vin-supply = <&vcc_3v3_main>;
163 regulator-always-on;
164 regulator-boot-on;
165 bootph-all;
166 };
167
168 vddshv_sdio: regulator-6 {
169 /* output of TLV7103318QDSERQ1 */
170 compatible = "regulator-gpio";
171 regulator-name = "vddshv_sdio";
172 pinctrl-names = "default";
173 pinctrl-0 = <&vddshv_sdio_pins_default>;
174 regulator-min-microvolt = <1800000>;
175 regulator-max-microvolt = <3300000>;
176 vin-supply = <&vcc_5v0>;
177 regulator-boot-on;
178 gpios = <&main_gpio0 59 GPIO_ACTIVE_HIGH>;
179 states = <1800000 0x0>,
180 <3300000 0x1>;
181 bootph-all;
182 };
183
184 leds {
185 compatible = "gpio-leds";
186 pinctrl-names = "default";
187 pinctrl-0 = <&usr_led_pins_default>;
188
189 led-0 {
190 label = "am62d-evm:green:heartbeat";
191 gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
192 linux,default-trigger = "heartbeat";
193 function = LED_FUNCTION_HEARTBEAT;
194 default-state = "off";
195 };
196 };
197 };
198
199 &mcu_pmx0 {
200 status = "okay";
201
202 pmic_irq_pins_default: pmic-irq-default-pins {
203 pinctrl-single,pins = <
204 AM62DX_IOPAD(0x01f4, PIN_INPUT, 7) /* (F17) EXTINTn.GPIO1_31 */
205 >;
206 };
207
208 wkup_uart0_pins_default: wkup-uart0-default-pins {
209 pinctrl-single,pins = <
210 AM62DX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */
211 AM62DX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */
212 AM62DX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */
213 AM62DX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */
214 >;
215 bootph-all;
216 };
217
218 wkup_i2c0_pins_default: wkup-i2c0-default-pins {
219 pinctrl-single,pins = <
220 AM62DX_MCU_IOPAD(0x004c, PIN_INPUT, 0) /* (D13) WKUP_I2C0_SCL */
221 AM62DX_MCU_IOPAD(0x0050, PIN_INPUT, 0) /* (E13) WKUP_I2C0_SDA */
222 >;
223 bootph-all;
224 };
225 };
226
227 /* WKUP UART0 is used for DM firmware logs */
228 &wkup_uart0 {
229 pinctrl-names = "default";
230 pinctrl-0 = <&wkup_uart0_pins_default>;
231 bootph-all;
232 status = "reserved";
233 };
234
235 &main_pmx0 {
236 main_uart0_pins_default: main-uart0-default-pins {
237 pinctrl-single,pins = <
238 AM62DX_IOPAD(0x01c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
239 AM62DX_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
240 >;
241 bootph-all;
242 };
243
244 main_i2c0_pins_default: main-i2c0-default-pins {
245 pinctrl-single,pins = <
246 AM62DX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */
247 AM62DX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */
248 >;
249 bootph-all;
250 };
251
252 main_i2c1_pins_default: main-i2c1-default-pins {
253 pinctrl-single,pins = <
254 AM62DX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C17) I2C1_SCL */
255 AM62DX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (E17) I2C1_SDA */
256 >;
257 bootph-all;
258 };
259
260 main_i2c2_pins_default: main-i2c2-default-pins {
261 pinctrl-single,pins = <
262 AM62DX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (M22) GPMC0_CSn2.I2C2_SCL */
263 AM62DX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (M20) GPMC0_CSn3.I2C2_SDA */
264 >;
265 };
266
267 main_mmc0_pins_default: main-mmc0-default-pins {
268 pinctrl-single,pins = <
269 AM62DX_IOPAD(0x0220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */
270 AM62DX_IOPAD(0x0218, PIN_OUTPUT, 0) /* (AB7) MMC0_CLK */
271 AM62DX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */
272 AM62DX_IOPAD(0x0210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */
273 AM62DX_IOPAD(0x020c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */
274 AM62DX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */
275 AM62DX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */
276 AM62DX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */
277 AM62DX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */
278 AM62DX_IOPAD(0x01f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */
279 >;
280 bootph-all;
281 };
282
283 main_mmc1_pins_default: main-mmc1-default-pins {
284 pinctrl-single,pins = <
285 AM62DX_IOPAD(0x023c, PIN_INPUT, 0) /* (C21) MMC1_CMD */
286 AM62DX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (E22) MMC1_CLK */
287 AM62DX_IOPAD(0x0230, PIN_INPUT, 0) /* (B22) MMC1_DAT0 */
288 AM62DX_IOPAD(0x022c, PIN_INPUT, 0) /* (D21) MMC1_DAT1 */
289 AM62DX_IOPAD(0x0228, PIN_INPUT, 0) /* (C22) MMC1_DAT2 */
290 AM62DX_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
291 AM62DX_IOPAD(0x0240, PIN_INPUT, 0) /* (E18) MMC1_SDCD */
292 >;
293 bootph-all;
294 };
295
296 main_mdio0_pins_default: main-mdio0-default-pins {
297 pinctrl-single,pins = <
298 AM62DX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
299 AM62DX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
300 >;
301 bootph-all;
302 };
303
304 main_rgmii1_pins_default: main-rgmii1-default-pins {
305 pinctrl-single,pins = <
306 AM62DX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */
307 AM62DX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */
308 AM62DX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */
309 AM62DX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */
310 AM62DX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */
311 AM62DX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */
312 AM62DX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */
313 AM62DX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */
314 AM62DX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */
315 AM62DX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */
316 AM62DX_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */
317 AM62DX_IOPAD(0x012c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */
318 >;
319 bootph-all;
320 };
321
322 main_rgmii2_pins_default: main-rgmii2-default-pins {
323 pinctrl-single,pins = <
324 AM62DX_IOPAD(0x0184, PIN_INPUT, 0) /* (AA21) RGMII2_RD0 */
325 AM62DX_IOPAD(0x0188, PIN_INPUT, 0) /* (Y20) RGMII2_RD1 */
326 AM62DX_IOPAD(0x018c, PIN_INPUT, 0) /* (AB21) RGMII2_RD2 */
327 AM62DX_IOPAD(0x0190, PIN_INPUT, 0) /* (AB20) RGMII2_RD3 */
328 AM62DX_IOPAD(0x0180, PIN_INPUT, 0) /* (AA20) RGMII2_RXC */
329 AM62DX_IOPAD(0x017c, PIN_INPUT, 0) /* (W18) RGMII2_RX_CTL */
330 AM62DX_IOPAD(0x016c, PIN_INPUT, 0) /* (AA19) RGMII2_TD0 */
331 AM62DX_IOPAD(0x0170, PIN_INPUT, 0) /* (Y18) RGMII2_TD1 */
332 AM62DX_IOPAD(0x0174, PIN_INPUT, 0) /* (AA18) RGMII2_TD2 */
333 AM62DX_IOPAD(0x0178, PIN_INPUT, 0) /* (W17) RGMII2_TD3 */
334 AM62DX_IOPAD(0x0168, PIN_OUTPUT, 0) /* (AB19) RGMII2_TXC */
335 AM62DX_IOPAD(0x0164, PIN_OUTPUT, 0) /* (Y19) RGMII2_TX_CTL */
336 >;
337 bootph-all;
338 };
339
340 main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
341 pinctrl-single,pins = <
342 AM62DX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
343 >;
344 };
345
346 vddshv_sdio_pins_default: vddshv-sdio-default-pins {
347 pinctrl-single,pins = <
348 AM62DX_IOPAD(0x00f0, PIN_INPUT, 7) /* (Y21) GPIO0_59 */
349 >;
350 bootph-all;
351 };
352
353 usr_led_pins_default: usr-led-default-pins {
354 pinctrl-single,pins = <
355 AM62DX_IOPAD(0x0244, PIN_INPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */
356 >;
357 };
358
359 main_usb1_pins_default: main-usb1-default-pins {
360 pinctrl-single,pins = <
361 AM62DX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (D19) USB1_DRVVBUS */
362 >;
363 };
364
365 ospi0_pins_default: ospi0-default-pins {
366 pinctrl-single,pins = <
367 AM62DX_IOPAD(0x0000, PIN_OUTPUT, 0) /* (L22) OSPI0_CLK */
368 AM62DX_IOPAD(0x002c, PIN_OUTPUT, 0) /* (H21) OSPI0_CSn0 */
369 AM62DX_IOPAD(0x000c, PIN_INPUT, 0) /* (J21) OSPI0_D0 */
370 AM62DX_IOPAD(0x0010, PIN_INPUT, 0) /* (J18) OSPI0_D1 */
371 AM62DX_IOPAD(0x0014, PIN_INPUT, 0) /* (J19) OSPI0_D2 */
372 AM62DX_IOPAD(0x0018, PIN_INPUT, 0) /* (H18) OSPI0_D3 */
373 AM62DX_IOPAD(0x001c, PIN_INPUT, 0) /* (K21) OSPI0_D4 */
374 AM62DX_IOPAD(0x0020, PIN_INPUT, 0) /* (H19) OSPI0_D5 */
375 AM62DX_IOPAD(0x0024, PIN_INPUT, 0) /* (J20) OSPI0_D6 */
376 AM62DX_IOPAD(0x0028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
377 AM62DX_IOPAD(0x0008, PIN_INPUT, 0) /* (L21) OSPI0_DQS */
378 >;
379 bootph-all;
380 };
381 };
382
383 &mcu_gpio0 {
384 status = "okay";
385 };
386
387 &main_i2c0 {
388 pinctrl-names = "default";
389 pinctrl-0 = <&main_i2c0_pins_default>;
390 clock-frequency = <400000>;
391 bootph-all;
392 status = "okay";
393
394 typec_pd0: usb-power-controller@3f {
395 compatible = "ti,tps6598x";
396 reg = <0x3f>;
397
398 connector {
399 compatible = "usb-c-connector";
400 label = "USB-C";
401 self-powered;
402 data-role = "dual";
403 power-role = "sink";
404 port {
405 usb_con_hs: endpoint {
406 remote-endpoint = <&usb0_hs_ep>;
407 };
408 };
409 };
410 };
411
412 exp1: gpio@22 {
413 compatible = "ti,tca6424";
414 reg = <0x22>;
415 gpio-controller;
416 #gpio-cells = <2>;
417 interrupt-parent = <&main_gpio1>;
418 interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
419 interrupt-controller;
420 #interrupt-cells = <2>;
421 pinctrl-names = "default";
422 pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
423 bootph-all;
424
425 gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
426 "","MMC1_SD_EN",
427 "VPP_EN", "GPIO_DIX_RST",
428 "IO_EXP_OPT_EN", "DIX_INT",
429 "GPIO_eMMC_RSTn", "CPLD2_DONE",
430 "CPLD2_INTN", "CPLD1_DONE",
431 "CPLD1_INTN", "USB_TYPEA_OC_INDICATION",
432 "PCM1_INT", "PCM2_INT",
433 "GPIO_PCM1_RST", "TEST_GPIO2",
434 "GPIO_PCM2_RST", "",
435 "IO_MCAN0_STB", "IO_MCAN1_STB",
436 "PD_I2C_IRQ", "IO_EXP_TEST_LED";
437 };
438
439 exp2: gpio@20 {
440 compatible = "ti,tca6416";
441 reg = <0x20>;
442 gpio-controller;
443 #gpio-cells = <2>;
444
445 gpio-line-names = "PCM6240_BUF_IO_EN", "",
446 "CPLD1_JTAGENB", "CPLD1_PROGRAMN",
447 "CPLD2_JTAGENB", "CPLD2_PROGRAMN",
448 "", "",
449 "", "CPLD1_TCK",
450 "CPLD1_TMS", "CPLD1_TDI",
451 "CPLD1_TDO", "CPLD2_TCK",
452 "CPLD2_TMS", "CPLD2_TDI",
453 "CPLD2_TDO", "ADDR1_IO_EXP",
454 "SoC_I2C0_SCL", "SoC_I2C0_SDA";
455 };
456 };
457
458 &main_i2c1 {
459 pinctrl-names = "default";
460 pinctrl-0 = <&main_i2c1_pins_default>;
461 clock-frequency = <100000>;
462 status = "okay";
463 };
464
465 &main_i2c2 {
466 pinctrl-names = "default";
467 pinctrl-0 = <&main_i2c2_pins_default>;
468 clock-frequency = <400000>;
469 status = "okay";
470 };
471
472 &wkup_i2c0 {
473 pinctrl-names = "default";
474 pinctrl-0 = <&wkup_i2c0_pins_default>;
475 clock-frequency = <400000>;
476 status = "okay";
477
478 tps65224: pmic@48 {
479 compatible = "ti,tps65224-q1";
480 reg = <0x48>;
481 pinctrl-names = "default";
482 pinctrl-0 = <&pmic_irq_pins_default>;
483 interrupt-parent = <&main_gpio1>;
484 interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
485 ti,primary-pmic;
486
487 gpio-controller;
488 #gpio-cells = <2>;
489
490 buck12-supply = <&vcc_3v3_sys>;
491 buck3-supply = <&vcc_3v3_sys>;
492 buck4-supply = <&vcc_3v3_sys>;
493 ldo1-supply = <&vcc_3v3_sys>;
494 ldo2-supply = <&vcc_3v3_sys>;
495 ldo3-supply = <&vcc_3v3_sys>;
496
497 regulators {
498 buck12: buck12 {
499 regulator-name = "vdd_core";
500 regulator-min-microvolt = <850000>;
501 regulator-max-microvolt = <850000>;
502 regulator-boot-on;
503 regulator-always-on;
504 bootph-all;
505 };
506
507 buck3: buck3 {
508 regulator-name = "dvdd1v8";
509 regulator-min-microvolt = <1800000>;
510 regulator-max-microvolt = <1800000>;
511 regulator-boot-on;
512 regulator-always-on;
513 bootph-all;
514 };
515
516 buck4: buck4 {
517 regulator-name = "vdds_ddr";
518 regulator-min-microvolt = <1100000>;
519 regulator-max-microvolt = <1100000>;
520 regulator-boot-on;
521 regulator-always-on;
522 bootph-all;
523 };
524
525 ldo1: ldo1 {
526 regulator-name = "vdda_1v8";
527 regulator-min-microvolt = <1800000>;
528 regulator-max-microvolt = <1800000>;
529 regulator-boot-on;
530 regulator-always-on;
531 bootph-all;
532 };
533
534 ldo2: ldo2 {
535 regulator-name = "dvdd3v3";
536 regulator-min-microvolt = <3300000>;
537 regulator-max-microvolt = <3300000>;
538 regulator-boot-on;
539 regulator-always-on;
540 bootph-all;
541 };
542
543 ldo3: ldo3 {
544 regulator-name = "vddr_core";
545 regulator-min-microvolt = <850000>;
546 regulator-max-microvolt = <850000>;
547 regulator-boot-on;
548 regulator-always-on;
549 bootph-all;
550 };
551 };
552 };
553 };
554
555 &sdhci0 {
556 /* eMMC */
557 non-removable;
558 pinctrl-names = "default";
559 pinctrl-0 = <&main_mmc0_pins_default>;
560 bootph-all;
561 status = "okay";
562 };
563
564 &sdhci1 {
565 /* SD/MMC */
566 vmmc-supply = <&vdd_mmc1>;
567 vqmmc-supply = <&vddshv_sdio>;
568 pinctrl-names = "default";
569 pinctrl-0 = <&main_mmc1_pins_default>;
570 disable-wp;
571 bootph-all;
572 status = "okay";
573 };
574
575 &main_gpio0 {
576 bootph-all;
577 status = "okay";
578 };
579
580 &main_gpio1 {
581 bootph-all;
582 status = "okay";
583 };
584
585 &main_gpio_intr {
586 status = "okay";
587 };
588
589 &main_uart0 {
590 pinctrl-names = "default";
591 pinctrl-0 = <&main_uart0_pins_default>;
592 bootph-all;
593 status = "okay";
594 };
595
596 &usbss0 {
597 status = "okay";
598 ti,vbus-divider;
599 };
600
601 &usb0 {
602 usb-role-switch;
603
604 port {
605 usb0_hs_ep: endpoint {
606 remote-endpoint = <&usb_con_hs>;
607 };
608 };
609 };
610
611 &usbss1 {
612 status = "okay";
613 };
614
615 &usb1 {
616 dr_mode = "host";
617 pinctrl-names = "default";
618 pinctrl-0 = <&main_usb1_pins_default>;
619 };
620
621 &cpsw3g {
622 pinctrl-names = "default";
623 pinctrl-0 = <&main_rgmii1_pins_default>,
624 <&main_rgmii2_pins_default>;
625 status = "okay";
626
627 cpts@3d000 {
628 /* MAP HW3_TS_PUSH to GENF1 */
629 ti,pps = <2 1>;
630 };
631 };
632
633 &cpsw_port1 {
634 phy-mode = "rgmii-id";
635 phy-handle = <&cpsw3g_phy0>;
636 status = "okay";
637 };
638
639 &cpsw_port2 {
640 phy-mode = "rgmii-id";
641 phy-handle = <&cpsw3g_phy1>;
642 status = "okay";
643 };
644
645 &cpsw3g_mdio {
646 pinctrl-names = "default";
647 pinctrl-0 = <&main_mdio0_pins_default>;
648 status = "okay";
649
650 cpsw3g_phy0: ethernet-phy@0 {
651 reg = <0>;
652 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
653 ti,min-output-impedance;
654 };
655
656 cpsw3g_phy1: ethernet-phy@3 {
657 reg = <3>;
658 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
659 ti,min-output-impedance;
660 };
661 };
662
663 &fss {
664 status = "okay";
665 };
666
667 &ospi0 {
668 pinctrl-names = "default";
669 pinctrl-0 = <&ospi0_pins_default>;
670 status = "okay";
671
672 flash@0 {
673 compatible = "jedec,spi-nor";
674 reg = <0x0>;
675 spi-tx-bus-width = <8>;
676 spi-rx-bus-width = <8>;
677 spi-max-frequency = <25000000>;
678 cdns,tshsl-ns = <60>;
679 cdns,tsd2d-ns = <60>;
680 cdns,tchsh-ns = <60>;
681 cdns,tslch-ns = <60>;
682 cdns,read-delay = <4>;
683
684 partitions {
685 compatible = "fixed-partitions";
686 #address-cells = <1>;
687 #size-cells = <1>;
688
689 partition@0 {
690 label = "ospi.tiboot3";
691 reg = <0x0 0x80000>;
692 };
693
694 partition@80000 {
695 label = "ospi.tispl";
696 reg = <0x80000 0x200000>;
697 };
698
699 partition@280000 {
700 label = "ospi.u-boot";
701 reg = <0x280000 0x400000>;
702 };
703
704 partition@680000 {
705 label = "ospi.env";
706 reg = <0x680000 0x40000>;
707 };
708
709 partition@6c0000 {
710 label = "ospi.env.backup";
711 reg = <0x6c0000 0x40000>;
712 };
713
714 partition@800000 {
715 label = "ospi.rootfs";
716 reg = <0x800000 0x37c0000>;
717 };
718
719 partition@3fc0000 {
720 label = "ospi.phypattern";
721 reg = <0x3fc0000 0x40000>;
722 bootph-all;
723 };
724 };
725 };
726 };
727
728 &wkup_r5fss0_core0 {
729 bootph-pre-ram;
730 };
731
732 &mcu_r5fss0_core0 {
733 firmware-name = "am62d-mcu-r5f0_0-fw";
734 };
735
736 &c7x_0 {
737 firmware-name = "am62d-c71_0-fw";
738 };
739
740 #include "k3-am62a-ti-ipc-firmware.dtsi"