| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR MIT |
| 2 |
/* |
| 3 |
* Copyright (C) 2023 - 2024 PHYTEC America LLC |
| 4 |
* Author: Garrett Giordano <[email protected]> |
| 5 |
* |
| 6 |
* Product homepage: |
| 7 |
* https://www.phytec.com/product/phycore-am62a |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/leds/common.h> |
| 12 |
#include <dt-bindings/net/ti-dp83867.h> |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "PHYTEC phyCORE-AM62Ax"; |
| 16 |
compatible = "phytec,am62a-phycore-som", "ti,am62a7"; |
| 17 |
|
| 18 |
aliases { |
| 19 |
ethernet0 = &cpsw_port1; |
| 20 |
gpio0 = &main_gpio0; |
| 21 |
gpio1 = &main_gpio1; |
| 22 |
i2c0 = &main_i2c0; |
| 23 |
mmc0 = &sdhci0; |
| 24 |
rtc0 = &i2c_som_rtc; |
| 25 |
spi0 = &ospi0; |
| 26 |
}; |
| 27 |
|
| 28 |
leds { |
| 29 |
compatible = "gpio-leds"; |
| 30 |
pinctrl-names = "default"; |
| 31 |
pinctrl-0 = <&leds_pins_default>; |
| 32 |
|
| 33 |
led-0 { |
| 34 |
color = <LED_COLOR_ID_GREEN>; |
| 35 |
gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>; |
| 36 |
linux,default-trigger = "heartbeat"; |
| 37 |
function = LED_FUNCTION_HEARTBEAT; |
| 38 |
}; |
| 39 |
}; |
| 40 |
|
| 41 |
memory@80000000 { |
| 42 |
device_type = "memory"; |
| 43 |
/* 2G RAM */ |
| 44 |
reg = <0x00000000 0x80000000 0x00000000 0x80000000>; |
| 45 |
bootph-all; |
| 46 |
}; |
| 47 |
|
| 48 |
reserved_memory: reserved-memory { |
| 49 |
#address-cells = <2>; |
| 50 |
#size-cells = <2>; |
| 51 |
ranges; |
| 52 |
|
| 53 |
/* global cma region */ |
| 54 |
linux,cma { |
| 55 |
compatible = "shared-dma-pool"; |
| 56 |
reusable; |
| 57 |
size = <0x00 0x24000000>; |
| 58 |
alloc-ranges = <0x00 0xc0000000 0x00 0x24000000>; |
| 59 |
linux,cma-default; |
| 60 |
}; |
| 61 |
|
| 62 |
wkup_r5fss0_core0_dma_memory_region: memory@9c800000 { |
| 63 |
compatible = "shared-dma-pool"; |
| 64 |
reg = <0x00 0x9c800000 0x00 0x100000>; |
| 65 |
no-map; |
| 66 |
}; |
| 67 |
|
| 68 |
wkup_r5fss0_core0_memory_region: memory@9c900000 { |
| 69 |
compatible = "shared-dma-pool"; |
| 70 |
reg = <0x00 0x9c900000 0x00 0xf00000>; |
| 71 |
no-map; |
| 72 |
}; |
| 73 |
|
| 74 |
secure_tfa_ddr: tfa@9e780000 { |
| 75 |
reg = <0x00 0x9e780000 0x00 0x80000>; |
| 76 |
alignment = <0x1000>; |
| 77 |
no-map; |
| 78 |
}; |
| 79 |
|
| 80 |
secure_ddr: optee@9e800000 { |
| 81 |
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ |
| 82 |
alignment = <0x1000>; |
| 83 |
no-map; |
| 84 |
}; |
| 85 |
}; |
| 86 |
|
| 87 |
vcc_5v0_som: regulator-vcc-5v0-som { |
| 88 |
compatible = "regulator-fixed"; |
| 89 |
regulator-name = "VCC_5V0_SOM"; |
| 90 |
regulator-min-microvolt = <5000000>; |
| 91 |
regulator-max-microvolt = <5000000>; |
| 92 |
regulator-always-on; |
| 93 |
regulator-boot-on; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
&main_pmx0 { |
| 98 |
leds_pins_default: leds-default-pins { |
| 99 |
pinctrl-single,pins = < |
| 100 |
AM62AX_IOPAD(0x034, PIN_OUTPUT, 7) /* (K20) OSPI0_CSN2.GPIO0_13 */ |
| 101 |
>; |
| 102 |
}; |
| 103 |
|
| 104 |
main_i2c0_pins_default: main-i2c0-default-pins { |
| 105 |
pinctrl-single,pins = < |
| 106 |
AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */ |
| 107 |
AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */ |
| 108 |
>; |
| 109 |
bootph-all; |
| 110 |
}; |
| 111 |
|
| 112 |
main_mdio1_pins_default: main-mdio1-default-pins { |
| 113 |
pinctrl-single,pins = < |
| 114 |
AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ |
| 115 |
AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ |
| 116 |
>; |
| 117 |
bootph-all; |
| 118 |
}; |
| 119 |
|
| 120 |
main_mmc0_pins_default: main-mmc0-default-pins { |
| 121 |
pinctrl-single,pins = < |
| 122 |
AM62AX_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */ |
| 123 |
AM62AX_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB7) MMC0_CLK */ |
| 124 |
AM62AX_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */ |
| 125 |
AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */ |
| 126 |
AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */ |
| 127 |
AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */ |
| 128 |
AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */ |
| 129 |
AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */ |
| 130 |
AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */ |
| 131 |
AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */ |
| 132 |
>; |
| 133 |
bootph-all; |
| 134 |
}; |
| 135 |
|
| 136 |
main_rgmii1_pins_default: main-rgmii1-default-pins { |
| 137 |
pinctrl-single,pins = < |
| 138 |
AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */ |
| 139 |
AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */ |
| 140 |
AM62AX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */ |
| 141 |
AM62AX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */ |
| 142 |
AM62AX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */ |
| 143 |
AM62AX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */ |
| 144 |
AM62AX_IOPAD(0x134, PIN_OUTPUT, 0) /* (Y17) RGMII1_TD0 */ |
| 145 |
AM62AX_IOPAD(0x138, PIN_OUTPUT, 0) /* (V16) RGMII1_TD1 */ |
| 146 |
AM62AX_IOPAD(0x13c, PIN_OUTPUT, 0) /* (Y16) RGMII1_TD2 */ |
| 147 |
AM62AX_IOPAD(0x140, PIN_OUTPUT, 0) /* (AA17) RGMII1_TD3 */ |
| 148 |
AM62AX_IOPAD(0x130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */ |
| 149 |
AM62AX_IOPAD(0x12c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */ |
| 150 |
>; |
| 151 |
bootph-all; |
| 152 |
}; |
| 153 |
|
| 154 |
ospi0_pins_default: ospi0-default-pins { |
| 155 |
pinctrl-single,pins = < |
| 156 |
AM62AX_IOPAD(0x000, PIN_OUTPUT, 0) /* (L22) OSPI0_CLK */ |
| 157 |
AM62AX_IOPAD(0x02c, PIN_OUTPUT, 0) /* (H21) OSPI0_CSn0 */ |
| 158 |
AM62AX_IOPAD(0x038, PIN_OUTPUT, 0) /* (G20) OSPI0_CSn3 */ |
| 159 |
AM62AX_IOPAD(0x00c, PIN_INPUT, 0) /* (J21) OSPI0_D0 */ |
| 160 |
AM62AX_IOPAD(0x010, PIN_INPUT, 0) /* (J18) OSPI0_D1 */ |
| 161 |
AM62AX_IOPAD(0x014, PIN_INPUT, 0) /* (J19) OSPI0_D2 */ |
| 162 |
AM62AX_IOPAD(0x018, PIN_INPUT, 0) /* (H18) OSPI0_D3 */ |
| 163 |
AM62AX_IOPAD(0x01c, PIN_INPUT, 0) /* (K21) OSPI0_D4 */ |
| 164 |
AM62AX_IOPAD(0x020, PIN_INPUT, 0) /* (H19) OSPI0_D5 */ |
| 165 |
AM62AX_IOPAD(0x024, PIN_INPUT, 0) /* (J20) OSPI0_D6 */ |
| 166 |
AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ |
| 167 |
AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (L21) OSPI0_DQS */ |
| 168 |
>; |
| 169 |
bootph-all; |
| 170 |
}; |
| 171 |
|
| 172 |
pmic_irq_pins_default: pmic-irq-default-pins { |
| 173 |
pinctrl-single,pins = < |
| 174 |
AM62AX_IOPAD(0x1f4, PIN_INPUT, 0) /* (D16) EXTINTn */ |
| 175 |
>; |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
&a53_opp_table { |
| 180 |
/* Requires VDD_CORE at 0v85 */ |
| 181 |
opp-1400000000 { |
| 182 |
opp-hz = /bits/ 64 <1400000000>; |
| 183 |
opp-supported-hw = <0x01 0x0004>; |
| 184 |
clock-latency-ns = <6000000>; |
| 185 |
}; |
| 186 |
}; |
| 187 |
|
| 188 |
&cpsw3g { |
| 189 |
pinctrl-names = "default"; |
| 190 |
pinctrl-0 = <&main_rgmii1_pins_default>; |
| 191 |
status = "okay"; |
| 192 |
}; |
| 193 |
|
| 194 |
&cpsw_port1 { |
| 195 |
phy-mode = "rgmii-id"; |
| 196 |
phy-handle = <&cpsw3g_phy1>; |
| 197 |
bootph-all; |
| 198 |
}; |
| 199 |
|
| 200 |
&cpsw_mac_syscon { |
| 201 |
bootph-all; |
| 202 |
}; |
| 203 |
|
| 204 |
&cpsw3g_mdio { |
| 205 |
pinctrl-names = "default"; |
| 206 |
pinctrl-0 = <&main_mdio1_pins_default>; |
| 207 |
|
| 208 |
cpsw3g_phy1: ethernet-phy@1 { |
| 209 |
compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; |
| 210 |
reg = <1>; |
| 211 |
bootph-all; |
| 212 |
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; |
| 213 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 214 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 215 |
}; |
| 216 |
}; |
| 217 |
|
| 218 |
&fss { |
| 219 |
status = "okay"; |
| 220 |
}; |
| 221 |
|
| 222 |
&main_i2c0 { |
| 223 |
pinctrl-names = "default"; |
| 224 |
pinctrl-0 = <&main_i2c0_pins_default>; |
| 225 |
clock-frequency = <400000>; |
| 226 |
bootph-all; |
| 227 |
status = "okay"; |
| 228 |
|
| 229 |
pmic@30 { |
| 230 |
compatible = "ti,tps65219"; |
| 231 |
reg = <0x30>; |
| 232 |
buck1-supply = <&vcc_5v0_som>; |
| 233 |
buck2-supply = <&vcc_5v0_som>; |
| 234 |
buck3-supply = <&vcc_5v0_som>; |
| 235 |
ldo1-supply = <&vdd_3v3>; |
| 236 |
ldo2-supply = <&vdd_1v8>; |
| 237 |
ldo3-supply = <&vcc_5v0_som>; |
| 238 |
ldo4-supply = <&vcc_5v0_som>; |
| 239 |
|
| 240 |
pinctrl-names = "default"; |
| 241 |
pinctrl-0 = <&pmic_irq_pins_default>; |
| 242 |
interrupt-parent = <&gic500>; |
| 243 |
interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; |
| 244 |
interrupt-controller; |
| 245 |
#interrupt-cells = <1>; |
| 246 |
system-power-controller; |
| 247 |
ti,power-button; |
| 248 |
|
| 249 |
regulators { |
| 250 |
vdd_3v3: buck1 { |
| 251 |
regulator-name = "VDD_3V3"; |
| 252 |
regulator-min-microvolt = <3300000>; |
| 253 |
regulator-max-microvolt = <3300000>; |
| 254 |
regulator-boot-on; |
| 255 |
regulator-always-on; |
| 256 |
}; |
| 257 |
|
| 258 |
vdd_1v8: buck2 { |
| 259 |
regulator-name = "VDD_1V8"; |
| 260 |
regulator-min-microvolt = <1800000>; |
| 261 |
regulator-max-microvolt = <1800000>; |
| 262 |
regulator-boot-on; |
| 263 |
regulator-always-on; |
| 264 |
}; |
| 265 |
|
| 266 |
vdd_lpddr4: buck3 { |
| 267 |
regulator-name = "VDD_LPDDR4"; |
| 268 |
regulator-min-microvolt = <1100000>; |
| 269 |
regulator-max-microvolt = <1100000>; |
| 270 |
regulator-boot-on; |
| 271 |
regulator-always-on; |
| 272 |
}; |
| 273 |
|
| 274 |
vddshv5_sdio: ldo1 { |
| 275 |
regulator-name = "VDDSHV5_SDIO"; |
| 276 |
regulator-min-microvolt = <3300000>; |
| 277 |
regulator-max-microvolt = <3300000>; |
| 278 |
regulator-allow-bypass; |
| 279 |
regulator-boot-on; |
| 280 |
regulator-always-on; |
| 281 |
}; |
| 282 |
|
| 283 |
vddr_core: ldo2 { |
| 284 |
regulator-name = "VDDR_CORE"; |
| 285 |
regulator-min-microvolt = <850000>; |
| 286 |
regulator-max-microvolt = <850000>; |
| 287 |
regulator-boot-on; |
| 288 |
regulator-always-on; |
| 289 |
}; |
| 290 |
|
| 291 |
vdda_1v8: ldo3 { |
| 292 |
regulator-name = "VDDA_1V8"; |
| 293 |
regulator-min-microvolt = <1800000>; |
| 294 |
regulator-max-microvolt = <1800000>; |
| 295 |
regulator-boot-on; |
| 296 |
regulator-always-on; |
| 297 |
}; |
| 298 |
|
| 299 |
vdd_2v5: ldo4 { |
| 300 |
regulator-name = "VDD_2V5"; |
| 301 |
regulator-min-microvolt = <2500000>; |
| 302 |
regulator-max-microvolt = <2500000>; |
| 303 |
regulator-boot-on; |
| 304 |
regulator-always-on; |
| 305 |
}; |
| 306 |
}; |
| 307 |
}; |
| 308 |
|
| 309 |
eeprom@50 { |
| 310 |
compatible = "atmel,24c32"; |
| 311 |
pagesize = <32>; |
| 312 |
reg = <0x50>; |
| 313 |
}; |
| 314 |
|
| 315 |
i2c_som_rtc: rtc@52 { |
| 316 |
compatible = "microcrystal,rv3028"; |
| 317 |
reg = <0x52>; |
| 318 |
}; |
| 319 |
}; |
| 320 |
|
| 321 |
&main_gpio0 { |
| 322 |
status = "okay"; |
| 323 |
}; |
| 324 |
|
| 325 |
&main_gpio1 { |
| 326 |
status = "okay"; |
| 327 |
}; |
| 328 |
|
| 329 |
&main_gpio_intr { |
| 330 |
status = "okay"; |
| 331 |
}; |
| 332 |
|
| 333 |
&main_pktdma { |
| 334 |
bootph-all; |
| 335 |
}; |
| 336 |
|
| 337 |
&ospi0 { |
| 338 |
pinctrl-names = "default"; |
| 339 |
pinctrl-0 = <&ospi0_pins_default>; |
| 340 |
status = "okay"; |
| 341 |
|
| 342 |
serial_flash: flash@0 { |
| 343 |
compatible = "jedec,spi-nor"; |
| 344 |
reg = <0x0>; |
| 345 |
spi-tx-bus-width = <8>; |
| 346 |
spi-rx-bus-width = <8>; |
| 347 |
spi-max-frequency = <25000000>; |
| 348 |
cdns,tshsl-ns = <60>; |
| 349 |
cdns,tsd2d-ns = <60>; |
| 350 |
cdns,tchsh-ns = <60>; |
| 351 |
cdns,tslch-ns = <60>; |
| 352 |
cdns,read-delay = <0>; |
| 353 |
bootph-all; |
| 354 |
}; |
| 355 |
}; |
| 356 |
|
| 357 |
&phy_gmii_sel { |
| 358 |
bootph-all; |
| 359 |
}; |
| 360 |
|
| 361 |
&sdhci0 { |
| 362 |
pinctrl-names = "default"; |
| 363 |
pinctrl-0 = <&main_mmc0_pins_default>; |
| 364 |
non-removable; |
| 365 |
bootph-all; |
| 366 |
status = "okay"; |
| 367 |
}; |
| 368 |
|
| 369 |
#include "k3-am62a-ti-ipc-firmware.dtsi" |