| 1 |
// SPDX-License-Identifier: GPL-2.0-only OR MIT |
| 2 |
/* |
| 3 |
* https://www.beagleboard.org/boards/pocketbeagle-2 |
| 4 |
* |
| 5 |
* Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ |
| 6 |
* Copyright (C) 2025 Robert Nelson, BeagleBoard.org Foundation |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
|
| 11 |
#include <dt-bindings/leds/common.h> |
| 12 |
#include <dt-bindings/gpio/gpio.h> |
| 13 |
#include <dt-bindings/input/input.h> |
| 14 |
#include "k3-am625.dtsi" |
| 15 |
|
| 16 |
/ { |
| 17 |
compatible = "beagle,am62-pocketbeagle2", "ti,am625"; |
| 18 |
model = "BeagleBoard.org PocketBeagle2"; |
| 19 |
|
| 20 |
aliases { |
| 21 |
serial0 = &wkup_uart0; |
| 22 |
serial1 = &main_uart1; |
| 23 |
serial2 = &main_uart6; |
| 24 |
serial3 = &main_uart0; |
| 25 |
mmc1 = &sdhci1; |
| 26 |
usb0 = &usb0; |
| 27 |
usb1 = &usb1; |
| 28 |
i2c0 = &main_i2c0; |
| 29 |
i2c2 = &main_i2c2; |
| 30 |
i2c3 = &wkup_i2c0; |
| 31 |
}; |
| 32 |
|
| 33 |
chosen { |
| 34 |
stdout-path = &main_uart6; |
| 35 |
}; |
| 36 |
|
| 37 |
memory@80000000 { |
| 38 |
/* 512MB RAM */ |
| 39 |
reg = <0x00000000 0x80000000 0x00000000 0x20000000>; |
| 40 |
device_type = "memory"; |
| 41 |
bootph-pre-ram; |
| 42 |
}; |
| 43 |
|
| 44 |
reserved_memory: reserved-memory { |
| 45 |
#address-cells = <2>; |
| 46 |
#size-cells = <2>; |
| 47 |
ranges; |
| 48 |
|
| 49 |
/* global cma region */ |
| 50 |
linux,cma { |
| 51 |
compatible = "shared-dma-pool"; |
| 52 |
reusable; |
| 53 |
size = <0x00 0x8000000>; |
| 54 |
linux,cma-default; |
| 55 |
}; |
| 56 |
|
| 57 |
secure_tfa_ddr: tfa@9e780000 { |
| 58 |
reg = <0x00 0x9e780000 0x00 0x80000>; |
| 59 |
alignment = <0x1000>; |
| 60 |
no-map; |
| 61 |
}; |
| 62 |
|
| 63 |
secure_ddr: optee@9e800000 { |
| 64 |
reg = <0x00 0x9e800000 0x00 0x01800000>; |
| 65 |
alignment = <0x1000>; |
| 66 |
no-map; |
| 67 |
}; |
| 68 |
|
| 69 |
wkup_r5fss0_core0_dma_memory_region: memory@9da00000 { |
| 70 |
compatible = "shared-dma-pool"; |
| 71 |
reg = <0x00 0x9da00000 0x00 0x100000>; |
| 72 |
no-map; |
| 73 |
}; |
| 74 |
|
| 75 |
wkup_r5fss0_core0_memory_region: memory@9db00000 { |
| 76 |
compatible = "shared-dma-pool"; |
| 77 |
reg = <0x00 0x9db00000 0x00 0xc00000>; |
| 78 |
no-map; |
| 79 |
}; |
| 80 |
}; |
| 81 |
|
| 82 |
vsys_5v0: regulator-1 { |
| 83 |
compatible = "regulator-fixed"; |
| 84 |
regulator-name = "vsys_5v0"; |
| 85 |
regulator-min-microvolt = <5000000>; |
| 86 |
regulator-max-microvolt = <5000000>; |
| 87 |
regulator-always-on; |
| 88 |
regulator-boot-on; |
| 89 |
bootph-all; |
| 90 |
}; |
| 91 |
|
| 92 |
vdd_3v3: regulator-2 { |
| 93 |
compatible = "regulator-fixed"; |
| 94 |
regulator-name = "vdd_3v3"; |
| 95 |
regulator-min-microvolt = <3300000>; |
| 96 |
regulator-max-microvolt = <3300000>; |
| 97 |
vin-supply = <&vsys_5v0>; |
| 98 |
regulator-always-on; |
| 99 |
regulator-boot-on; |
| 100 |
bootph-all; |
| 101 |
}; |
| 102 |
|
| 103 |
vdd_mmc1: regulator-3 { |
| 104 |
compatible = "regulator-fixed"; |
| 105 |
regulator-name = "vdd_mmc1"; |
| 106 |
pinctrl-names = "default"; |
| 107 |
pinctrl-0 = <&vdd_3v3_sd_pins_default>; |
| 108 |
regulator-min-microvolt = <3300000>; |
| 109 |
regulator-max-microvolt = <3300000>; |
| 110 |
regulator-boot-on; |
| 111 |
enable-active-high; |
| 112 |
regulator-always-on; |
| 113 |
vin-supply = <&vdd_3v3>; |
| 114 |
gpio = <&main_gpio0 0 GPIO_ACTIVE_HIGH>; |
| 115 |
bootph-all; |
| 116 |
}; |
| 117 |
|
| 118 |
vdd_sd_dv: regulator-4 { |
| 119 |
compatible = "regulator-gpio"; |
| 120 |
regulator-name = "sd_hs200_switch"; |
| 121 |
pinctrl-names = "default"; |
| 122 |
pinctrl-0 = <&vdd_sd_dv_pins_default>; |
| 123 |
regulator-min-microvolt = <1800000>; |
| 124 |
regulator-max-microvolt = <3300000>; |
| 125 |
regulator-boot-on; |
| 126 |
vin-supply = <&vdd_3v3>; |
| 127 |
gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; |
| 128 |
states = <1800000 0x0>, |
| 129 |
<3300000 0x1>; |
| 130 |
bootph-all; |
| 131 |
}; |
| 132 |
|
| 133 |
adc_vref: regulator-5 { |
| 134 |
compatible = "regulator-fixed"; |
| 135 |
regulator-name = "default"; |
| 136 |
regulator-min-microvolt = <3300000>; |
| 137 |
regulator-max-microvolt = <3300000>; |
| 138 |
regulator-boot-on; |
| 139 |
}; |
| 140 |
|
| 141 |
leds { |
| 142 |
compatible = "gpio-leds"; |
| 143 |
pinctrl-names = "default"; |
| 144 |
pinctrl-0 = <&led_pins_default>; |
| 145 |
bootph-all; |
| 146 |
|
| 147 |
led-1 { |
| 148 |
function = LED_FUNCTION_HEARTBEAT; |
| 149 |
color = <LED_COLOR_ID_GREEN>; |
| 150 |
linux,default-trigger = "heartbeat"; |
| 151 |
gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>; |
| 152 |
default-state = "on"; |
| 153 |
bootph-all; |
| 154 |
}; |
| 155 |
|
| 156 |
led-2 { |
| 157 |
function = LED_FUNCTION_DISK_ACTIVITY; |
| 158 |
color = <LED_COLOR_ID_GREEN>; |
| 159 |
linux,default-trigger = "mmc1"; |
| 160 |
gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>; |
| 161 |
default-state = "on"; |
| 162 |
bootph-all; |
| 163 |
}; |
| 164 |
|
| 165 |
led-3 { |
| 166 |
function = LED_FUNCTION_INDICATOR; |
| 167 |
color = <LED_COLOR_ID_GREEN>; |
| 168 |
gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>; |
| 169 |
default-state = "off"; |
| 170 |
bootph-all; |
| 171 |
}; |
| 172 |
|
| 173 |
led-4 { |
| 174 |
function = LED_FUNCTION_INDICATOR; |
| 175 |
color = <LED_COLOR_ID_GREEN>; |
| 176 |
gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>; |
| 177 |
default-state = "off"; |
| 178 |
bootph-all; |
| 179 |
}; |
| 180 |
}; |
| 181 |
}; |
| 182 |
|
| 183 |
&main_pmx0 { |
| 184 |
led_pins_default: led-default-pins { |
| 185 |
pinctrl-single,pins = < |
| 186 |
AM62X_IOPAD(0x000c, PIN_OUTPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */ |
| 187 |
AM62X_IOPAD(0x0010, PIN_OUTPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */ |
| 188 |
AM62X_IOPAD(0x0014, PIN_OUTPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */ |
| 189 |
AM62X_IOPAD(0x0018, PIN_OUTPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */ |
| 190 |
>; |
| 191 |
bootph-all; |
| 192 |
}; |
| 193 |
|
| 194 |
main_i2c0_pins_default: main-i2c0-default-pins { |
| 195 |
pinctrl-single,pins = < |
| 196 |
AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ |
| 197 |
AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ |
| 198 |
>; |
| 199 |
bootph-all; |
| 200 |
}; |
| 201 |
|
| 202 |
main_i2c2_pins_default: main-i2c2-default-pins { |
| 203 |
pinctrl-single,pins = < |
| 204 |
AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ |
| 205 |
AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ |
| 206 |
>; |
| 207 |
bootph-all; |
| 208 |
}; |
| 209 |
|
| 210 |
main_uart0_pins_default: main-uart0-default-pins { |
| 211 |
pinctrl-single,pins = < |
| 212 |
AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */ |
| 213 |
AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */ |
| 214 |
>; |
| 215 |
bootph-all; |
| 216 |
}; |
| 217 |
|
| 218 |
main_uart1_pins_default: main-uart1-default-pins { |
| 219 |
pinctrl-single,pins = < |
| 220 |
AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */ |
| 221 |
AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */ |
| 222 |
AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19/D15) MCASP0_AFSR.UART1_RXD */ |
| 223 |
AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20/D16) MCASP0_ACLKR.UART1_TXD */ |
| 224 |
>; |
| 225 |
bootph-all; |
| 226 |
}; |
| 227 |
|
| 228 |
main_uart6_pins_default: main-uart6-default-pins { |
| 229 |
pinctrl-single,pins = < |
| 230 |
AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */ |
| 231 |
AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */ |
| 232 |
>; |
| 233 |
}; |
| 234 |
|
| 235 |
main_mmc1_pins_default: main-mmc1-default-pins { |
| 236 |
pinctrl-single,pins = < |
| 237 |
AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */ |
| 238 |
AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */ |
| 239 |
AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */ |
| 240 |
AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */ |
| 241 |
AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */ |
| 242 |
AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */ |
| 243 |
AM62X_IOPAD(0x240, PIN_INPUT, 7) /* (D17/C15) MMC1_SDCD.GPIO1_48 */ |
| 244 |
>; |
| 245 |
bootph-all; |
| 246 |
}; |
| 247 |
|
| 248 |
vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { |
| 249 |
pinctrl-single,pins = < |
| 250 |
AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO1_49 */ |
| 251 |
>; |
| 252 |
bootph-all; |
| 253 |
}; |
| 254 |
|
| 255 |
pmic_irq_pins_default: pmic-irq-default-pins { |
| 256 |
pinctrl-single,pins = < |
| 257 |
AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */ |
| 258 |
>; |
| 259 |
bootph-all; |
| 260 |
}; |
| 261 |
|
| 262 |
vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins { |
| 263 |
pinctrl-single,pins = < |
| 264 |
AM62X_IOPAD(0x0000, PIN_OUTPUT, 7) /* (H24) OSPI0_CLK.GPIO0_0 */ |
| 265 |
>; |
| 266 |
bootph-all; |
| 267 |
}; |
| 268 |
|
| 269 |
usb1_pins_default: usb1-default-pins { |
| 270 |
pinctrl-single,pins = < |
| 271 |
AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */ |
| 272 |
>; |
| 273 |
bootph-all; |
| 274 |
}; |
| 275 |
|
| 276 |
epwm2_pins_default: epwm2-default-pins { |
| 277 |
pinctrl-single,pins = < |
| 278 |
AM62X_IOPAD(0x01e8, PIN_OUTPUT, 8) /* (B17) I2C1_SCL.EHRPWM2_A */ |
| 279 |
>; |
| 280 |
}; |
| 281 |
}; |
| 282 |
|
| 283 |
&epwm2 { |
| 284 |
status = "okay"; |
| 285 |
pinctrl-names = "default"; |
| 286 |
pinctrl-0 = <&epwm2_pins_default>; |
| 287 |
}; |
| 288 |
|
| 289 |
&main_uart0 { |
| 290 |
pinctrl-names = "default"; |
| 291 |
pinctrl-0 = <&main_uart0_pins_default>; |
| 292 |
bootph-all; |
| 293 |
status = "okay"; |
| 294 |
}; |
| 295 |
|
| 296 |
&main_uart1 { |
| 297 |
pinctrl-names = "default"; |
| 298 |
pinctrl-0 = <&main_uart1_pins_default>; |
| 299 |
bootph-pre-ram; |
| 300 |
status = "reserved"; |
| 301 |
}; |
| 302 |
|
| 303 |
&main_uart6 { |
| 304 |
pinctrl-names = "default"; |
| 305 |
pinctrl-0 = <&main_uart6_pins_default>; |
| 306 |
bootph-all; |
| 307 |
status = "okay"; |
| 308 |
}; |
| 309 |
|
| 310 |
&main_i2c0 { |
| 311 |
pinctrl-names = "default"; |
| 312 |
pinctrl-0 = <&main_i2c0_pins_default>; |
| 313 |
clock-frequency = <400000>; |
| 314 |
bootph-all; |
| 315 |
status = "okay"; |
| 316 |
|
| 317 |
ad7291: adc@20 { |
| 318 |
/* Emulated with MSPM0L1105 */ |
| 319 |
compatible = "adi,ad7291"; |
| 320 |
reg = <0x20>; |
| 321 |
vref-supply = <&adc_vref>; |
| 322 |
}; |
| 323 |
|
| 324 |
eeprom: eeprom@50 { |
| 325 |
/* Emulated with MSPM0L1105 */ |
| 326 |
compatible = "atmel,24c32"; |
| 327 |
reg = <0x50>; |
| 328 |
}; |
| 329 |
}; |
| 330 |
|
| 331 |
&main_i2c2 { |
| 332 |
pinctrl-names = "default"; |
| 333 |
pinctrl-0 = <&main_i2c2_pins_default>; |
| 334 |
clock-frequency = <400000>; |
| 335 |
bootph-all; |
| 336 |
status = "okay"; |
| 337 |
}; |
| 338 |
|
| 339 |
&mcu_pmx0 { |
| 340 |
wkup_uart0_pins_default: wkup-uart0-default-pins { |
| 341 |
pinctrl-single,pins = < |
| 342 |
AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */ |
| 343 |
AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */ |
| 344 |
AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (B4/B5) WKUP_UART0_RXD */ |
| 345 |
AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (C5/C6) WKUP_UART0_TXD */ |
| 346 |
>; |
| 347 |
bootph-all; |
| 348 |
}; |
| 349 |
|
| 350 |
wkup_i2c0_pins_default: wkup-i2c0-default-pins { |
| 351 |
pinctrl-single,pins = < |
| 352 |
AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */ |
| 353 |
AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */ |
| 354 |
>; |
| 355 |
bootph-all; |
| 356 |
}; |
| 357 |
}; |
| 358 |
|
| 359 |
&sdhci1 { |
| 360 |
/* SD/MMC */ |
| 361 |
vmmc-supply = <&vdd_mmc1>; |
| 362 |
vqmmc-supply = <&vdd_sd_dv>; |
| 363 |
pinctrl-names = "default"; |
| 364 |
pinctrl-0 = <&main_mmc1_pins_default>; |
| 365 |
disable-wp; |
| 366 |
cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; |
| 367 |
cd-debounce-delay-ms = <100>; |
| 368 |
bootph-all; |
| 369 |
ti,fails-without-test-cd; |
| 370 |
status = "okay"; |
| 371 |
}; |
| 372 |
|
| 373 |
&usbss0 { |
| 374 |
bootph-all; |
| 375 |
ti,vbus-divider; |
| 376 |
status = "okay"; |
| 377 |
}; |
| 378 |
|
| 379 |
&usb0 { |
| 380 |
/* This is a Type-C socket, but wired as USB 2.0 */ |
| 381 |
dr_mode = "peripheral"; |
| 382 |
bootph-all; |
| 383 |
}; |
| 384 |
|
| 385 |
&usbss1 { |
| 386 |
ti,vbus-divider; |
| 387 |
status = "okay"; |
| 388 |
}; |
| 389 |
|
| 390 |
&usb1 { |
| 391 |
/* |
| 392 |
* Default set here is compatible with original PocketBeagle, |
| 393 |
* Expansion boards assumed this was pre-setup as host. |
| 394 |
*/ |
| 395 |
dr_mode = "host"; |
| 396 |
pinctrl-names = "default"; |
| 397 |
pinctrl-0 = <&usb1_pins_default>; |
| 398 |
}; |
| 399 |
|
| 400 |
&wkup_uart0 { |
| 401 |
/* WKUP UART0 is used by Device Manager firmware */ |
| 402 |
pinctrl-names = "default"; |
| 403 |
pinctrl-0 = <&wkup_uart0_pins_default>; |
| 404 |
bootph-all; |
| 405 |
status = "reserved"; |
| 406 |
}; |
| 407 |
|
| 408 |
&wkup_i2c0 { |
| 409 |
pinctrl-names = "default"; |
| 410 |
pinctrl-0 = <&wkup_i2c0_pins_default>; |
| 411 |
clock-frequency = <100000>; |
| 412 |
bootph-all; |
| 413 |
status = "okay"; |
| 414 |
|
| 415 |
tps65219: pmic@30 { |
| 416 |
compatible = "ti,tps65219"; |
| 417 |
reg = <0x30>; |
| 418 |
buck1-supply = <&vsys_5v0>; |
| 419 |
buck2-supply = <&vsys_5v0>; |
| 420 |
buck3-supply = <&vsys_5v0>; |
| 421 |
ldo1-supply = <&vdd_3v3>; |
| 422 |
ldo2-supply = <&buck2_reg>; |
| 423 |
ldo3-supply = <&vdd_3v3>; |
| 424 |
ldo4-supply = <&vdd_3v3>; |
| 425 |
|
| 426 |
pinctrl-names = "default"; |
| 427 |
pinctrl-0 = <&pmic_irq_pins_default>; |
| 428 |
interrupt-parent = <&gic500>; |
| 429 |
interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; |
| 430 |
interrupt-controller; |
| 431 |
#interrupt-cells = <1>; |
| 432 |
|
| 433 |
bootph-all; |
| 434 |
system-power-controller; |
| 435 |
ti,power-button; |
| 436 |
|
| 437 |
regulators { |
| 438 |
buck1_reg: buck1 { |
| 439 |
regulator-name = "VDD_CORE"; |
| 440 |
regulator-min-microvolt = <850000>; |
| 441 |
regulator-max-microvolt = <850000>; |
| 442 |
regulator-boot-on; |
| 443 |
regulator-always-on; |
| 444 |
}; |
| 445 |
|
| 446 |
buck2_reg: buck2 { |
| 447 |
regulator-name = "VDD_1V8"; |
| 448 |
regulator-min-microvolt = <1800000>; |
| 449 |
regulator-max-microvolt = <1800000>; |
| 450 |
regulator-boot-on; |
| 451 |
regulator-always-on; |
| 452 |
}; |
| 453 |
|
| 454 |
buck3_reg: buck3 { |
| 455 |
regulator-name = "VDD_1V2"; |
| 456 |
regulator-min-microvolt = <1200000>; |
| 457 |
regulator-max-microvolt = <1200000>; |
| 458 |
regulator-boot-on; |
| 459 |
regulator-always-on; |
| 460 |
}; |
| 461 |
|
| 462 |
ldo1_reg: ldo1 { |
| 463 |
/* |
| 464 |
* Regulator is left as is unused, vdd_sd |
| 465 |
* is controlled via GPIO with bypass config |
| 466 |
* as per the NVM configuration |
| 467 |
*/ |
| 468 |
regulator-name = "VDD_SD_3V3"; |
| 469 |
regulator-min-microvolt = <3300000>; |
| 470 |
regulator-max-microvolt = <3300000>; |
| 471 |
regulator-allow-bypass; |
| 472 |
regulator-boot-on; |
| 473 |
regulator-always-on; |
| 474 |
}; |
| 475 |
|
| 476 |
ldo2_reg: ldo2 { |
| 477 |
regulator-name = "VDDA_0V85"; |
| 478 |
regulator-min-microvolt = <850000>; |
| 479 |
regulator-max-microvolt = <850000>; |
| 480 |
regulator-boot-on; |
| 481 |
regulator-always-on; |
| 482 |
}; |
| 483 |
|
| 484 |
ldo3_reg: ldo3 { |
| 485 |
regulator-name = "VDDA_1V8"; |
| 486 |
regulator-min-microvolt = <1800000>; |
| 487 |
regulator-max-microvolt = <1800000>; |
| 488 |
regulator-boot-on; |
| 489 |
regulator-always-on; |
| 490 |
}; |
| 491 |
|
| 492 |
ldo4_reg: ldo4 { |
| 493 |
regulator-name = "VDD_2V5"; |
| 494 |
regulator-min-microvolt = <2500000>; |
| 495 |
regulator-max-microvolt = <2500000>; |
| 496 |
regulator-boot-on; |
| 497 |
regulator-always-on; |
| 498 |
}; |
| 499 |
}; |
| 500 |
}; |
| 501 |
}; |
| 502 |
|
| 503 |
#include "k3-am62-ti-ipc-firmware.dtsi" |