Debian Codegraph @

scripts/dtc/include-prefixes/arm64/ti/k3-am62-phycore-som.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
2 /*
3 * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
4 * Author: Wadim Egorov <[email protected]>
5 *
6 * Product homepage:
7 * https://www.phytec.com/product/phycore-am62x
8 */
9
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/leds/common.h>
12 #include <dt-bindings/net/ti-dp83867.h>
13
14 / {
15 model = "PHYTEC phyCORE-AM62x";
16 compatible = "phytec,am62-phycore-som", "ti,am625";
17
18 aliases {
19 ethernet0 = &cpsw_port1;
20 gpio0 = &main_gpio0;
21 gpio1 = &main_gpio1;
22 i2c0 = &main_i2c0;
23 mmc0 = &sdhci0;
24 rtc0 = &i2c_som_rtc;
25 rtc1 = &wkup_rtc0;
26 spi0 = &ospi0;
27 };
28
29 memory@80000000 {
30 device_type = "memory";
31 reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
32 bootph-all;
33 };
34
35 reserved_memory: reserved-memory {
36 #address-cells = <2>;
37 #size-cells = <2>;
38 ranges;
39
40 ramoops@9c700000 {
41 compatible = "ramoops";
42 reg = <0x00 0x9c700000 0x00 0x00100000>;
43 record-size = <0x8000>;
44 console-size = <0x8000>;
45 ftrace-size = <0x00>;
46 pmsg-size = <0x8000>;
47 };
48
49 rtos_ipc_memory_region: memory@9c800000 {
50 compatible = "shared-dma-pool";
51 reg = <0x00 0x9c800000 0x00 0x00300000>;
52 no-map;
53 };
54
55 wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
56 compatible = "shared-dma-pool";
57 reg = <0x00 0x9da00000 0x00 0x100000>;
58 no-map;
59 };
60
61 wkup_r5fss0_core0_memory_region: memory@9db00000 {
62 compatible = "shared-dma-pool";
63 reg = <0x00 0x9db00000 0x00 0xc00000>;
64 no-map;
65 };
66
67 secure_tfa_ddr: tfa@9e780000 {
68 reg = <0x00 0x9e780000 0x00 0x80000>;
69 alignment = <0x1000>;
70 no-map;
71 };
72
73 secure_ddr: optee@9e800000 {
74 reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
75 alignment = <0x1000>;
76 no-map;
77 };
78 };
79
80 vcc_5v0_som: regulator-vcc-5v0-som {
81 compatible = "regulator-fixed";
82 regulator-name = "VCC_5V0_SOM";
83 regulator-min-microvolt = <5000000>;
84 regulator-max-microvolt = <5000000>;
85 regulator-always-on;
86 regulator-boot-on;
87 };
88
89 vdd_1v8: regulator-vdd-1v8 {
90 compatible = "regulator-fixed";
91 regulator-name = "VDD_1V8";
92 regulator-min-microvolt = <1800000>;
93 regulator-max-microvolt = <1800000>;
94 vin-supply = <&vcc_5v0_som>;
95 regulator-always-on;
96 regulator-boot-on;
97 };
98
99 vddshv_3v3: regulator-vddshv-3v3 {
100 compatible = "regulator-fixed";
101 regulator-name = "VDDSHV0";
102 regulator-min-microvolt = <3300000>;
103 regulator-max-microvolt = <3300000>;
104 vin-supply = <&vdd_3v3>;
105 regulator-always-on;
106 regulator-boot-on;
107 };
108
109 leds {
110 compatible = "gpio-leds";
111 pinctrl-names = "default";
112 pinctrl-0 = <&leds_pins_default>;
113
114 led-0 {
115 color = <LED_COLOR_ID_GREEN>;
116 gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>;
117 linux,default-trigger = "heartbeat";
118 function = LED_FUNCTION_HEARTBEAT;
119 };
120 };
121 };
122
123 &main_pmx0 {
124 leds_pins_default: leds-default-pins {
125 pinctrl-single,pins = <
126 AM62X_IOPAD(0x034, PIN_OUTPUT, 7) /* (H21) OSPI0_CSN2.GPIO0_13 */
127 >;
128 };
129
130 main_i2c0_pins_default: main-i2c0-default-pins {
131 pinctrl-single,pins = <
132 AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
133 AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
134 >;
135 bootph-all;
136 };
137
138 main_mdio1_pins_default: main-mdio1-default-pins {
139 pinctrl-single,pins = <
140 AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
141 AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
142 >;
143 bootph-all;
144 };
145
146 main_mmc0_pins_default: main-mmc0-default-pins {
147 pinctrl-single,pins = <
148 AM62X_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y3) MMC0_CMD */
149 AM62X_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB1) MMC0_CLK */
150 AM62X_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA2) MMC0_DAT0 */
151 AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
152 AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
153 AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
154 AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
155 AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
156 AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
157 AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
158 >;
159 bootph-all;
160 };
161
162 main_rgmii1_pins_default: main-rgmii1-default-pins {
163 pinctrl-single,pins = <
164 AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
165 AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
166 AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
167 AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
168 AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
169 AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
170 AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
171 AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
172 AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
173 AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
174 AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
175 AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
176 >;
177 bootph-all;
178 };
179
180 ospi0_pins_default: ospi0-default-pins {
181 pinctrl-single,pins = <
182 AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
183 AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
184 AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
185 AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
186 AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
187 AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
188 AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
189 AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
190 AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
191 AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
192 AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
193 >;
194 bootph-all;
195 };
196
197 pmic_irq_pins_default: pmic-irq-default-pins {
198 pinctrl-single,pins = <
199 AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */
200 >;
201 };
202 };
203
204 &a53_opp_table {
205 opp-1400000000 {
206 opp-hz = /bits/ 64 <1400000000>;
207 opp-supported-hw = <0x01 0x0004>;
208 };
209 };
210
211 &cpsw3g {
212 pinctrl-names = "default";
213 pinctrl-0 = <&main_rgmii1_pins_default>;
214 status = "okay";
215 };
216
217 &cpsw_port1 {
218 phy-mode = "rgmii-id";
219 phy-handle = <&cpsw3g_phy1>;
220 bootph-all;
221 };
222
223 &cpsw_mac_syscon {
224 bootph-all;
225 };
226
227 &cpsw3g_mdio {
228 pinctrl-names = "default";
229 pinctrl-0 = <&main_mdio1_pins_default>;
230 status = "okay";
231
232 cpsw3g_phy1: ethernet-phy@1 {
233 compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
234 reg = <1>;
235 bootph-all;
236 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
237 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
238 };
239 };
240
241 &main_pktdma {
242 bootph-all;
243 };
244
245 &main_i2c0 {
246 pinctrl-names = "default";
247 pinctrl-0 = <&main_i2c0_pins_default>;
248 clock-frequency = <400000>;
249 bootph-all;
250 status = "okay";
251
252 pmic@30 {
253 compatible = "ti,tps65219";
254 reg = <0x30>;
255 buck1-supply = <&vcc_5v0_som>;
256 buck2-supply = <&vcc_5v0_som>;
257 buck3-supply = <&vcc_5v0_som>;
258 ldo1-supply = <&vdd_3v3>;
259 ldo2-supply = <&vdd_1v8>;
260 ldo3-supply = <&vcc_5v0_som>;
261 ldo4-supply = <&vcc_5v0_som>;
262
263 pinctrl-names = "default";
264 pinctrl-0 = <&pmic_irq_pins_default>;
265 interrupt-parent = <&gic500>;
266 interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
267 interrupt-controller;
268 #interrupt-cells = <1>;
269
270 ti,power-button;
271 system-power-controller;
272
273 regulators {
274 vdd_core: buck1 {
275 regulator-name = "VDD_CORE";
276 regulator-min-microvolt = <850000>;
277 regulator-max-microvolt = <850000>;
278 regulator-boot-on;
279 regulator-always-on;
280 };
281
282 vdd_3v3: buck2 {
283 regulator-name = "VDD_3V3";
284 regulator-min-microvolt = <3300000>;
285 regulator-max-microvolt = <3300000>;
286 regulator-boot-on;
287 regulator-always-on;
288 };
289
290 vdd_ddr4: buck3 {
291 regulator-name = "VDD_DDR4";
292 regulator-min-microvolt = <1200000>;
293 regulator-max-microvolt = <1200000>;
294 regulator-boot-on;
295 regulator-always-on;
296 };
297
298 vddshv5_sdio: ldo1 {
299 regulator-name = "VDDSHV5_SDIO";
300 regulator-min-microvolt = <3300000>;
301 regulator-max-microvolt = <3300000>;
302 regulator-allow-bypass;
303 regulator-boot-on;
304 regulator-always-on;
305 };
306
307 vddr_core: ldo2 {
308 regulator-name = "VDDR_CORE";
309 regulator-min-microvolt = <850000>;
310 regulator-max-microvolt = <850000>;
311 regulator-boot-on;
312 regulator-always-on;
313 };
314
315 vdda_1v8: ldo3 {
316 regulator-name = "VDDA_1V8";
317 regulator-min-microvolt = <1800000>;
318 regulator-max-microvolt = <1800000>;
319 regulator-boot-on;
320 regulator-always-on;
321 };
322
323 vdd_2v5: ldo4 {
324 regulator-name = "VDD_2V5";
325 regulator-min-microvolt = <2500000>;
326 regulator-max-microvolt = <2500000>;
327 regulator-boot-on;
328 regulator-always-on;
329 };
330 };
331 };
332
333 eeprom@50 {
334 compatible = "atmel,24c32";
335 pagesize = <32>;
336 reg = <0x50>;
337 vcc-supply = <&vddshv_3v3>;
338 };
339
340 i2c_som_rtc: rtc@52 {
341 compatible = "microcrystal,rv3028";
342 reg = <0x52>;
343 };
344 };
345
346 &ospi0 {
347 pinctrl-names = "default";
348 pinctrl-0 = <&ospi0_pins_default>;
349 status = "okay";
350
351 serial_flash: flash@0 {
352 compatible = "jedec,spi-nor";
353 reg = <0x0>;
354 spi-tx-bus-width = <8>;
355 spi-rx-bus-width = <8>;
356 spi-max-frequency = <25000000>;
357 cdns,tshsl-ns = <60>;
358 cdns,tsd2d-ns = <60>;
359 cdns,tchsh-ns = <60>;
360 cdns,tslch-ns = <60>;
361 cdns,read-delay = <0>;
362 bootph-all;
363 };
364 };
365
366 &phy_gmii_sel {
367 bootph-all;
368 };
369
370 &sdhci0 {
371 pinctrl-names = "default";
372 pinctrl-0 = <&main_mmc0_pins_default>;
373 non-removable;
374 bootph-all;
375 status = "okay";
376 };
377
378 #include "k3-am62-ti-ipc-firmware.dtsi"