Debian Codegraph @

scripts/dtc/include-prefixes/arm64/ti/k3-am62-lp-sk.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
2 /*
3 * AM62x LP SK: https://www.ti.com/tool/SK-AM62-LP
4 *
5 * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
6 */
7
8 /dts-v1/;
9
10 #include "k3-am625.dtsi"
11 #include "k3-am62x-sk-common.dtsi"
12
13 / {
14 compatible = "ti,am62-lp-sk", "ti,am625";
15 model = "Texas Instruments AM62x LP SK";
16
17 memory@80000000 {
18 /* 2G RAM */
19 reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
20 device_type = "memory";
21 bootph-pre-ram;
22 };
23
24 vmain_pd: regulator-0 {
25 /* TPS65988 PD CONTROLLER OUTPUT */
26 compatible = "regulator-fixed";
27 regulator-name = "vmain_pd";
28 regulator-min-microvolt = <5000000>;
29 regulator-max-microvolt = <5000000>;
30 regulator-always-on;
31 regulator-boot-on;
32 };
33
34 vcc_5v0: regulator-1 {
35 /* Output of TPS630702RNMR */
36 compatible = "regulator-fixed";
37 regulator-name = "vcc_5v0";
38 regulator-min-microvolt = <5000000>;
39 regulator-max-microvolt = <5000000>;
40 vin-supply = <&vmain_pd>;
41 regulator-always-on;
42 regulator-boot-on;
43 };
44
45 vcc_3v3_sys: regulator-2 {
46 /* output of LM61460-Q1 */
47 compatible = "regulator-fixed";
48 regulator-name = "vcc_3v3_sys";
49 regulator-min-microvolt = <3300000>;
50 regulator-max-microvolt = <3300000>;
51 vin-supply = <&vmain_pd>;
52 regulator-always-on;
53 regulator-boot-on;
54 };
55
56 vdd_mmc1: regulator-3 {
57 /* TPS22918DBVR */
58 compatible = "regulator-fixed";
59 regulator-name = "vdd_mmc1";
60 regulator-min-microvolt = <3300000>;
61 regulator-max-microvolt = <3300000>;
62 regulator-boot-on;
63 enable-active-high;
64 vin-supply = <&vcc_3v3_sys>;
65 gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
66 };
67
68 vddshv_sdio: regulator-4 {
69 compatible = "regulator-gpio";
70 regulator-name = "vddshv_sdio";
71 pinctrl-names = "default";
72 pinctrl-0 = <&vddshv_sdio_pins_default>;
73 regulator-min-microvolt = <1800000>;
74 regulator-max-microvolt = <3300000>;
75 regulator-boot-on;
76 vin-supply = <&ldo1_reg>;
77 gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
78 states = <1800000 0x0>,
79 <3300000 0x1>;
80 bootph-all;
81 };
82 };
83
84 &main_pmx0 {
85 main_mmc0_pins_default: main-mmc0-default-pins {
86 bootph-all;
87 pinctrl-single,pins = <
88 AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */
89 AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */
90 AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */
91 AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (V1) MMC0_DAT1 */
92 AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (W2) MMC0_DAT2 */
93 AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (W1) MMC0_DAT3 */
94 AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (Y2) MMC0_DAT4 */
95 AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (W3) MMC0_DAT5 */
96 AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (W4) MMC0_DAT6 */
97 AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (V4) MMC0_DAT7 */
98 >;
99 };
100
101 vddshv_sdio_pins_default: vddshv-sdio-default-pins {
102 pinctrl-single,pins = <
103 AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
104 >;
105 bootph-all;
106 };
107
108 main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
109 pinctrl-single,pins = <
110 AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */
111 >;
112 bootph-all;
113 };
114
115 pmic_irq_pins_default: pmic-irq-default-pins {
116 pinctrl-single,pins = <
117 AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (B16) EXTINTn */
118 >;
119 };
120 };
121
122 &main_i2c1 {
123 exp1: gpio@22 {
124 compatible = "ti,tca6424";
125 reg = <0x22>;
126 gpio-controller;
127 #gpio-cells = <2>;
128 gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
129 "PRU_DETECT", "MMC1_SD_EN",
130 "VPP_LDO_EN", "EXP_PS_3V3_En",
131 "EXP_PS_5V0_En", "EXP_HAT_DETECT",
132 "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
133 "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC",
134 "GPIO_HDMI_RSTn", "CSI_GPIO0",
135 "CSI_GPIO1", "GPIO_OLDI_INT",
136 "HDMI_INTn", "TEST_GPIO2",
137 "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
138 "MCASP1_FET_SEL", "UART1_FET_SEL",
139 "", "IO_EXP_TEST_LED";
140
141 interrupt-parent = <&main_gpio1>;
142 interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
143 interrupt-controller;
144 #interrupt-cells = <2>;
145
146 pinctrl-names = "default";
147 pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
148 bootph-all;
149 };
150
151 exp2: gpio@23 {
152 compatible = "ti,tca6424";
153 reg = <0x23>;
154 gpio-controller;
155 #gpio-cells = <2>;
156 gpio-line-names = "", "",
157 "", "",
158 "", "",
159 "", "",
160 "WL_LT_EN", "CSI_RSTz",
161 "", "",
162 "", "",
163 "", "",
164 "SPI0_FET_SEL", "SPI0_FET_OE",
165 "GPIO_OLDI_RSTn", "PRU_3V3_EN",
166 "", "",
167 "CSI_VLDO_SEL", "SOC_WLAN_SDIO_RST";
168 };
169 };
170
171 &sdhci0 {
172 bootph-all;
173 non-removable;
174 pinctrl-names = "default";
175 pinctrl-0 = <&main_mmc0_pins_default>;
176 status = "okay";
177 };
178
179 &sdhci1 {
180 vmmc-supply = <&vdd_mmc1>;
181 vqmmc-supply = <&vddshv_sdio>;
182 };
183
184 &cpsw3g {
185 status = "okay";
186 };
187
188 &cpsw_port2 {
189 status = "disabled";
190 };
191
192 &main_i2c0 {
193 tps65219: pmic@30 {
194 compatible = "ti,tps65219";
195 reg = <0x30>;
196 buck1-supply = <&vcc_3v3_sys>;
197 buck2-supply = <&vcc_3v3_sys>;
198 buck3-supply = <&vcc_3v3_sys>;
199 ldo1-supply = <&vcc_3v3_sys>;
200 ldo2-supply = <&buck2_reg>;
201 ldo3-supply = <&vcc_3v3_sys>;
202 ldo4-supply = <&vcc_3v3_sys>;
203
204 pinctrl-names = "default";
205 pinctrl-0 = <&pmic_irq_pins_default>;
206
207 interrupt-parent = <&gic500>;
208 interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
209
210 regulators {
211 buck1_reg: buck1 {
212 regulator-name = "VDD_CORE";
213 regulator-min-microvolt = <750000>;
214 regulator-max-microvolt = <750000>;
215 regulator-boot-on;
216 regulator-always-on;
217 };
218
219 buck2_reg: buck2 {
220 regulator-name = "VCC1V8_SYS";
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
223 regulator-boot-on;
224 regulator-always-on;
225 };
226
227 buck3_reg: buck3 {
228 regulator-name = "VDD_LPDDR4";
229 regulator-min-microvolt = <1100000>;
230 regulator-max-microvolt = <1100000>;
231 regulator-boot-on;
232 regulator-always-on;
233 };
234
235 ldo1_reg: ldo1 {
236 regulator-name = "VDDSHV_SDIO";
237 regulator-min-microvolt = <3300000>;
238 regulator-max-microvolt = <3300000>;
239 };
240
241 ldo2_reg: ldo2 {
242 regulator-name = "VDDAR_CORE";
243 regulator-min-microvolt = <850000>;
244 regulator-max-microvolt = <850000>;
245 regulator-boot-on;
246 regulator-always-on;
247 };
248
249 ldo3_reg: ldo3 {
250 regulator-name = "VDDA_1V8";
251 regulator-min-microvolt = <1800000>;
252 regulator-max-microvolt = <1800000>;
253 regulator-boot-on;
254 regulator-always-on;
255 };
256
257 ldo4_reg: ldo4 {
258 regulator-name = "VDD_1V2";
259 regulator-min-microvolt = <1200000>;
260 regulator-max-microvolt = <1200000>;
261 regulator-boot-on;
262 regulator-always-on;
263 };
264 };
265 };
266 };
267
268 &tlv320aic3106 {
269 DVDD-supply = <&buck2_reg>;
270 };
271
272 &main_gpio0 {
273 bootph-all;
274 };
275
276 &main_gpio1 {
277 bootph-all;
278 };
279
280 &gpmc0 {
281 ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */
282 };
283
284 &mcu_mcan0 {
285 pinctrl-names = "default", "wakeup";
286 pinctrl-0 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_default>;
287 pinctrl-1 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_wakeup>;
288 wakeup-source = <&system_partial_io>,
289 <&system_deep_sleep>,
290 <&system_mcu_only>,
291 <&system_standby>;
292 status = "okay";
293 };
294
295 &mcu_mcan1 {
296 pinctrl-names = "default", "wakeup";
297 pinctrl-0 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_default>;
298 pinctrl-1 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_wakeup>;
299 wakeup-source = <&system_partial_io>,
300 <&system_deep_sleep>,
301 <&system_mcu_only>,
302 <&system_standby>;
303 status = "okay";
304 };
305
306 &mcu_pmx0 {
307 mcu_mcan0_tx_pins_default: mcu-mcan0-tx-default-pins {
308 pinctrl-single,pins = <
309 AM62X_IOPAD(0x034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */
310 >;
311 };
312
313 mcu_mcan0_rx_pins_default: mcu-mcan0-rx-default-pins {
314 pinctrl-single,pins = <
315 AM62X_IOPAD(0x038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */
316 >;
317 };
318
319 mcu_mcan0_rx_pins_wakeup: mcu-mcan0-rx-wakeup-pins {
320 pinctrl-single,pins = <
321 AM62X_IOPAD(0x038, PIN_INPUT | PIN_WKUP_EN, 0) /* (B3) MCU_MCAN0_RX */
322 >;
323 };
324
325 mcu_mcan1_tx_pins_default: mcu-mcan1-tx-default-pins {
326 pinctrl-single,pins = <
327 AM62X_IOPAD(0x03c, PIN_OUTPUT, 0) /* (E5) MCU_MCAN1_TX */
328 >;
329 };
330
331 mcu_mcan1_rx_pins_default: mcu-mcan1-rx-default-pins {
332 pinctrl-single,pins = <
333 AM62X_IOPAD(0x040, PIN_INPUT, 0) /* (D4) MCU_MCAN1_RX */
334 >;
335 };
336
337 mcu_mcan1_rx_pins_wakeup: mcu-mcan1-rx-wakeup-pins {
338 pinctrl-single,pins = <
339 AM62X_IOPAD(0x040, PIN_INPUT | PIN_WKUP_EN, 0) /* (D4) MCU_MCAN1_RX */
340 >;
341 };
342 };