| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
/plugin/; |
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 10 |
#include "k3-pinctrl.h" |
| 11 |
|
| 12 |
&mcasp1 { |
| 13 |
status = "disabled"; |
| 14 |
}; |
| 15 |
|
| 16 |
&main_pmx0 { |
| 17 |
gpmc0_pins_default: gpmc0-default-pins { |
| 18 |
pinctrl-single,pins = < |
| 19 |
AM62X_IOPAD(0x003c, PIN_INPUT, 0) /* (K19) GPMC0_AD0 */ |
| 20 |
AM62X_IOPAD(0x0040, PIN_INPUT, 0) /* (L19) GPMC0_AD1 */ |
| 21 |
AM62X_IOPAD(0x0044, PIN_INPUT, 0) /* (L20) GPMC0_AD2 */ |
| 22 |
AM62X_IOPAD(0x0048, PIN_INPUT, 0) /* (L21) GPMC0_AD3 */ |
| 23 |
AM62X_IOPAD(0x004c, PIN_INPUT, 0) /* (M21) GPMC0_AD4 */ |
| 24 |
AM62X_IOPAD(0x0050, PIN_INPUT, 0) /* (L17) GPMC0_AD5 */ |
| 25 |
AM62X_IOPAD(0x0054, PIN_INPUT, 0) /* (L18) GPMC0_AD6 */ |
| 26 |
AM62X_IOPAD(0x0058, PIN_INPUT, 0) /* (M20) GPMC0_AD7 */ |
| 27 |
AM62X_IOPAD(0x0098, PIN_INPUT, 0) /* (P21) GPMC0_WAIT0 */ |
| 28 |
AM62X_IOPAD(0x00a8, PIN_OUTPUT, 0) /* (J18) GPMC0_CSn0 */ |
| 29 |
AM62X_IOPAD(0x0084, PIN_OUTPUT, 0) /* (K20) GPMC0_ADVn_ALE */ |
| 30 |
AM62X_IOPAD(0x0088, PIN_OUTPUT, 0) /* (K21) GPMC0_OEn_REn */ |
| 31 |
AM62X_IOPAD(0x008c, PIN_OUTPUT, 0) /* (J17) GPMC0_WEn */ |
| 32 |
AM62X_IOPAD(0x0090, PIN_OUTPUT, 0) /* (K17) GPMC0_BE0n_CLE */ |
| 33 |
AM62X_IOPAD(0x00a0, PIN_OUTPUT, 0) /* (J20) GPMC0_WPn */ |
| 34 |
>; |
| 35 |
}; |
| 36 |
}; |
| 37 |
|
| 38 |
&elm0 { |
| 39 |
status = "okay"; |
| 40 |
}; |
| 41 |
|
| 42 |
&gpmc0 { |
| 43 |
status = "okay"; |
| 44 |
pinctrl-names = "default"; |
| 45 |
pinctrl-0 = <&gpmc0_pins_default>; |
| 46 |
#address-cells = <2>; |
| 47 |
#size-cells = <1>; |
| 48 |
|
| 49 |
nand@0,0 { |
| 50 |
compatible = "ti,am64-nand"; |
| 51 |
reg = <0 0 64>; /* device IO registers */ |
| 52 |
interrupt-parent = <&gpmc0>; |
| 53 |
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ |
| 54 |
<1 IRQ_TYPE_NONE>; /* termcount */ |
| 55 |
rb-gpios = <&gpmc0 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ |
| 56 |
ti,nand-xfer-type = "prefetch-polled"; |
| 57 |
ti,nand-ecc-opt = "bch8"; /* BCH8: Bootrom limitation */ |
| 58 |
ti,elm-id = <&elm0>; |
| 59 |
nand-bus-width = <8>; |
| 60 |
gpmc,device-width = <1>; |
| 61 |
gpmc,sync-clk-ps = <0>; |
| 62 |
gpmc,cs-on-ns = <0>; |
| 63 |
gpmc,cs-rd-off-ns = <40>; |
| 64 |
gpmc,cs-wr-off-ns = <40>; |
| 65 |
gpmc,adv-on-ns = <0>; |
| 66 |
gpmc,adv-rd-off-ns = <25>; |
| 67 |
gpmc,adv-wr-off-ns = <25>; |
| 68 |
gpmc,we-on-ns = <0>; |
| 69 |
gpmc,we-off-ns = <20>; |
| 70 |
gpmc,oe-on-ns = <3>; |
| 71 |
gpmc,oe-off-ns = <30>; |
| 72 |
gpmc,access-ns = <30>; |
| 73 |
gpmc,rd-cycle-ns = <40>; |
| 74 |
gpmc,wr-cycle-ns = <40>; |
| 75 |
gpmc,bus-turnaround-ns = <0>; |
| 76 |
gpmc,cycle2cycle-delay-ns = <0>; |
| 77 |
gpmc,clk-activation-ns = <0>; |
| 78 |
gpmc,wr-access-ns = <40>; |
| 79 |
gpmc,wr-data-mux-bus-ns = <0>; |
| 80 |
|
| 81 |
partitions { |
| 82 |
compatible = "fixed-partitions"; |
| 83 |
#address-cells = <1>; |
| 84 |
#size-cells = <1>; |
| 85 |
|
| 86 |
partition@0 { |
| 87 |
label = "NAND.tiboot3"; |
| 88 |
reg = <0x00000000 0x00200000>; /* 2M */ |
| 89 |
}; |
| 90 |
partition@200000 { |
| 91 |
label = "NAND.tispl"; |
| 92 |
reg = <0x00200000 0x00200000>; /* 2M */ |
| 93 |
}; |
| 94 |
partition@400000 { |
| 95 |
label = "NAND.tiboot3.backup"; /* 2M */ |
| 96 |
reg = <0x00400000 0x00200000>; /* BootROM looks at 4M */ |
| 97 |
}; |
| 98 |
partition@600000 { |
| 99 |
label = "NAND.u-boot"; |
| 100 |
reg = <0x00600000 0x00400000>; /* 4M */ |
| 101 |
}; |
| 102 |
partition@a00000 { |
| 103 |
label = "NAND.u-boot-env"; |
| 104 |
reg = <0x00a00000 0x00040000>; /* 256K */ |
| 105 |
}; |
| 106 |
partition@a40000 { |
| 107 |
label = "NAND.u-boot-env.backup"; |
| 108 |
reg = <0x00a40000 0x00040000>; /* 256K */ |
| 109 |
}; |
| 110 |
partition@a80000 { |
| 111 |
label = "NAND.file-system"; |
| 112 |
reg = <0x00a80000 0x3f580000>; |
| 113 |
}; |
| 114 |
}; |
| 115 |
}; |
| 116 |
}; |