Debian Codegraph @

scripts/dtc/include-prefixes/arm64/st/stm32mp257f-dk.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
2 /*
3 * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
4 * Author: Alexandre Torgue <[email protected]> for STMicroelectronics.
5 */
6
7 /dts-v1/;
8
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
12 #include "stm32mp257.dtsi"
13 #include "stm32mp25xf.dtsi"
14 #include "stm32mp25-pinctrl.dtsi"
15 #include "stm32mp25xxak-pinctrl.dtsi"
16
17 / {
18 model = "STMicroelectronics STM32MP257F-DK Discovery Board";
19 compatible = "st,stm32mp257f-dk", "st,stm32mp257";
20
21 aliases {
22 ethernet0 = &ethernet1;
23 serial0 = &usart2;
24 };
25
26 chosen {
27 stdout-path = "serial0:115200n8";
28 };
29
30 gpio-keys {
31 compatible = "gpio-keys";
32
33 button-user-1 {
34 label = "User-1";
35 linux,code = <BTN_1>;
36 gpios = <&gpioc 5 GPIO_ACTIVE_HIGH>;
37 };
38
39 button-user-2 {
40 label = "User-2";
41 linux,code = <BTN_2>;
42 gpios = <&gpioc 11 GPIO_ACTIVE_HIGH>;
43 };
44 };
45
46 gpio-leds {
47 compatible = "gpio-leds";
48
49 led_blue: led-blue {
50 function = LED_FUNCTION_HEARTBEAT;
51 color = <LED_COLOR_ID_BLUE>;
52 gpios = <&gpioh 7 GPIO_ACTIVE_HIGH>;
53 linux,default-trigger = "heartbeat";
54 default-state = "off";
55 };
56
57 led-green {
58 color = <LED_COLOR_ID_GREEN>;
59 gpios = <&gpioh 5 GPIO_ACTIVE_HIGH>;
60 };
61
62 led-orange {
63 color = <LED_COLOR_ID_ORANGE>;
64 gpios = <&gpioh 6 GPIO_ACTIVE_HIGH>;
65 };
66 };
67
68 lpddr_channel: sdram-channel-0 {
69 #address-cells = <1>;
70 #size-cells = <0>;
71 compatible = "jedec,lpddr4-channel";
72 io-width = <32>;
73 };
74
75 memory@80000000 {
76 device_type = "memory";
77 reg = <0x0 0x80000000 0x1 0x0>;
78 };
79
80 options {
81 u-boot {
82 compatible = "u-boot,config";
83 boot-led = <&led_blue>;
84 };
85 };
86
87 reserved-memory {
88 #address-cells = <2>;
89 #size-cells = <2>;
90 ranges;
91
92 fw@80000000 {
93 compatible = "shared-dma-pool";
94 reg = <0x0 0x80000000 0x0 0x4000000>;
95 no-map;
96 };
97 };
98 };
99
100 &arm_wdt {
101 timeout-sec = <32>;
102 status = "okay";
103 };
104
105 &ethernet1 {
106 pinctrl-0 = <&eth1_rgmii_pins_b>;
107 pinctrl-1 = <&eth1_rgmii_sleep_pins_b>;
108 pinctrl-names = "default", "sleep";
109 phy-handle = <&phy1_eth1>;
110 phy-mode = "rgmii-id";
111 status = "okay";
112
113 mdio {
114 #address-cells = <1>;
115 #size-cells = <0>;
116 compatible = "snps,dwmac-mdio";
117 phy1_eth1: ethernet-phy@1 {
118 compatible = "ethernet-phy-id001c.c916";
119 reg = <1>;
120 reset-gpios = <&gpioa 2 GPIO_ACTIVE_LOW>;
121 reset-assert-us = <10000>;
122 reset-deassert-us = <80000>;
123 };
124 };
125 };
126
127 &scmi_regu {
128 scmi_vddio1: regulator@0 {
129 regulator-min-microvolt = <1800000>;
130 regulator-max-microvolt = <3300000>;
131 };
132 scmi_vdd_sdcard: regulator@23 {
133 reg = <VOLTD_SCMI_STPMIC2_LDO7>;
134 regulator-name = "vdd_sdcard";
135 };
136 };
137
138 &sdmmc1 {
139 pinctrl-names = "default", "opendrain", "sleep";
140 pinctrl-0 = <&sdmmc1_b4_pins_a>;
141 pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
142 pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
143 cd-gpios = <&gpiod 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
144 disable-wp;
145 st,neg-edge;
146 bus-width = <4>;
147 vmmc-supply = <&scmi_vdd_sdcard>;
148 vqmmc-supply = <&scmi_vddio1>;
149 status = "okay";
150 };
151
152 &usart2 {
153 pinctrl-names = "default", "idle", "sleep";
154 pinctrl-0 = <&usart2_pins_a>;
155 pinctrl-1 = <&usart2_idle_pins_a>;
156 pinctrl-2 = <&usart2_sleep_pins_a>;
157 /delete-property/dmas;
158 /delete-property/dma-names;
159 status = "okay";
160 };