| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Spreadtrum Whale2 platform peripherals |
| 4 |
* |
| 5 |
* Copyright (C) 2016, Spreadtrum Communications Inc. |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/clock/sprd,sc9860-clk.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
interrupt-parent = <&gic>; |
| 12 |
#address-cells = <2>; |
| 13 |
#size-cells = <2>; |
| 14 |
|
| 15 |
soc: soc { |
| 16 |
compatible = "simple-bus"; |
| 17 |
#address-cells = <2>; |
| 18 |
#size-cells = <2>; |
| 19 |
ranges; |
| 20 |
|
| 21 |
apahb_gate: clock-controller@20210000 { |
| 22 |
reg = <0 0x20210000 0 0x10000>; |
| 23 |
compatible = "sprd,sc9860-apahb-gate"; |
| 24 |
clocks = <&aon_prediv 0>; |
| 25 |
#clock-cells = <1>; |
| 26 |
}; |
| 27 |
|
| 28 |
pmu_gate: clock-controller@402b0000 { |
| 29 |
reg = <0 0x402b0000 0 0x10000>; |
| 30 |
compatible = "sprd,sc9860-pmu-gate"; |
| 31 |
clocks = <&ext_26m>; |
| 32 |
#clock-cells = <1>; |
| 33 |
}; |
| 34 |
|
| 35 |
aon_gate: clock-controller@402e0000 { |
| 36 |
reg = <0 0x402e0000 0 0x10000>; |
| 37 |
compatible = "sprd,sc9860-aon-gate"; |
| 38 |
clocks = <&aon_prediv 0>; |
| 39 |
#clock-cells = <1>; |
| 40 |
}; |
| 41 |
|
| 42 |
pll: clock-controller@40400000 { |
| 43 |
reg = <0 0x40400000 0 0x10000>; |
| 44 |
compatible = "sprd,sc9860-pll"; |
| 45 |
clocks = <&pmu_gate 0>; |
| 46 |
#clock-cells = <1>; |
| 47 |
}; |
| 48 |
|
| 49 |
agcp_gate: clock-controller@415e0000 { |
| 50 |
reg = <0 0x415e0000 0 0x1000000>; |
| 51 |
compatible = "sprd,sc9860-agcp-gate"; |
| 52 |
clocks = <&aon_prediv 0>; |
| 53 |
#clock-cells = <1>; |
| 54 |
}; |
| 55 |
|
| 56 |
vsp_gate: clock-controller@61100000 { |
| 57 |
reg = <0 0x61100000 0 0x10000>; |
| 58 |
compatible = "sprd,sc9860-vsp-gate"; |
| 59 |
clocks = <&vsp_clk 0>; |
| 60 |
#clock-cells = <1>; |
| 61 |
}; |
| 62 |
|
| 63 |
cam_gate: clock-controller@62100000 { |
| 64 |
reg = <0 0x62100000 0 0x10000>; |
| 65 |
compatible = "sprd,sc9860-cam-gate"; |
| 66 |
clocks = <&cam_clk 0>; |
| 67 |
#clock-cells = <1>; |
| 68 |
}; |
| 69 |
|
| 70 |
disp_gate: clock-controller@63100000 { |
| 71 |
reg = <0 0x63100000 0 0x10000>; |
| 72 |
compatible = "sprd,sc9860-disp-gate"; |
| 73 |
clocks = <&disp_clk 0>; |
| 74 |
#clock-cells = <1>; |
| 75 |
}; |
| 76 |
|
| 77 |
apapb_gate: clock-controller@70b00000 { |
| 78 |
reg = <0 0x70b00000 0 0x40000>; |
| 79 |
compatible = "sprd,sc9860-apapb-gate"; |
| 80 |
clocks = <&ap_clk 0>; |
| 81 |
#clock-cells = <1>; |
| 82 |
}; |
| 83 |
|
| 84 |
apb@70000000 { |
| 85 |
compatible = "simple-bus"; |
| 86 |
#address-cells = <1>; |
| 87 |
#size-cells = <1>; |
| 88 |
ranges = <0 0x0 0x70000000 0x10000000>; |
| 89 |
|
| 90 |
uart0: serial@0 { |
| 91 |
compatible = "sprd,sc9860-uart", |
| 92 |
"sprd,sc9836-uart"; |
| 93 |
reg = <0x0 0x100>; |
| 94 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 95 |
clocks = <&apapb_gate CLK_UART0_EB>, |
| 96 |
<&ap_clk CLK_UART0>, |
| 97 |
<&ext_26m>; |
| 98 |
clock-names = "enable", "uart", "source"; |
| 99 |
status = "disabled"; |
| 100 |
}; |
| 101 |
|
| 102 |
uart1: serial@100000 { |
| 103 |
compatible = "sprd,sc9860-uart", |
| 104 |
"sprd,sc9836-uart"; |
| 105 |
reg = <0x100000 0x100>; |
| 106 |
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 107 |
clocks = <&apapb_gate CLK_UART1_EB>, |
| 108 |
<&ap_clk CLK_UART1>, |
| 109 |
<&ext_26m>; |
| 110 |
clock-names = "enable", "uart", "source"; |
| 111 |
status = "disabled"; |
| 112 |
}; |
| 113 |
|
| 114 |
uart2: serial@200000 { |
| 115 |
compatible = "sprd,sc9860-uart", |
| 116 |
"sprd,sc9836-uart"; |
| 117 |
reg = <0x200000 0x100>; |
| 118 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 119 |
clocks = <&apapb_gate CLK_UART2_EB>, |
| 120 |
<&ap_clk CLK_UART2>, |
| 121 |
<&ext_26m>; |
| 122 |
clock-names = "enable", "uart", "source"; |
| 123 |
status = "disabled"; |
| 124 |
}; |
| 125 |
|
| 126 |
uart3: serial@300000 { |
| 127 |
compatible = "sprd,sc9860-uart", |
| 128 |
"sprd,sc9836-uart"; |
| 129 |
reg = <0x300000 0x100>; |
| 130 |
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| 131 |
clocks = <&apapb_gate CLK_UART3_EB>, |
| 132 |
<&ap_clk CLK_UART3>, |
| 133 |
<&ext_26m>; |
| 134 |
clock-names = "enable", "uart", "source"; |
| 135 |
status = "disabled"; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
ahb { |
| 140 |
compatible = "simple-bus"; |
| 141 |
#address-cells = <2>; |
| 142 |
#size-cells = <2>; |
| 143 |
ranges; |
| 144 |
|
| 145 |
ap_dma: dma-controller@20100000 { |
| 146 |
compatible = "sprd,sc9860-dma"; |
| 147 |
reg = <0 0x20100000 0 0x4000>; |
| 148 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 149 |
#dma-cells = <1>; |
| 150 |
/* For backwards compatibility: */ |
| 151 |
#dma-channels = <32>; |
| 152 |
dma-channels = <32>; |
| 153 |
clocks = <&apahb_gate CLK_DMA_EB>; |
| 154 |
clock-names = "enable"; |
| 155 |
}; |
| 156 |
|
| 157 |
sdio3: mmc@50430000 { |
| 158 |
compatible = "sprd,sdhci-r11"; |
| 159 |
reg = <0 0x50430000 0 0x1000>; |
| 160 |
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 161 |
|
| 162 |
clocks = <&aon_prediv CLK_EMMC_2X>, |
| 163 |
<&apahb_gate CLK_EMMC_EB>, |
| 164 |
<&aon_gate CLK_EMMC_2X_EN>; |
| 165 |
clock-names = "sdio", "enable", "2x_enable"; |
| 166 |
assigned-clocks = <&aon_prediv CLK_EMMC_2X>; |
| 167 |
assigned-clock-parents = <&clk_l0_409m6>; |
| 168 |
|
| 169 |
sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>; |
| 170 |
sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>; |
| 171 |
sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>; |
| 172 |
sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>; |
| 173 |
vmmc-supply = <&vddemmccore>; |
| 174 |
bus-width = <8>; |
| 175 |
non-removable; |
| 176 |
no-sdio; |
| 177 |
no-sd; |
| 178 |
cap-mmc-hw-reset; |
| 179 |
mmc-hs400-enhanced-strobe; |
| 180 |
mmc-hs400-1_8v; |
| 181 |
mmc-hs200-1_8v; |
| 182 |
mmc-ddr-1_8v; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
aon-bus { |
| 187 |
compatible = "simple-bus"; |
| 188 |
#address-cells = <2>; |
| 189 |
#size-cells = <2>; |
| 190 |
ranges; |
| 191 |
|
| 192 |
adi_bus: spi@40030000 { |
| 193 |
compatible = "sprd,sc9860-adi"; |
| 194 |
reg = <0 0x40030000 0 0x10000>; |
| 195 |
hwlocks = <&hwlock 0>; |
| 196 |
hwlock-names = "adi"; |
| 197 |
#address-cells = <1>; |
| 198 |
#size-cells = <0>; |
| 199 |
}; |
| 200 |
|
| 201 |
timer@40050000 { |
| 202 |
compatible = "sprd,sc9860-timer"; |
| 203 |
reg = <0 0x40050000 0 0x20>; |
| 204 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 205 |
clocks = <&ext_32k>; |
| 206 |
}; |
| 207 |
|
| 208 |
timer@40050020 { |
| 209 |
compatible = "sprd,sc9860-suspend-timer"; |
| 210 |
reg = <0 0x40050020 0 0x20>; |
| 211 |
clocks = <&ext_32k>; |
| 212 |
}; |
| 213 |
|
| 214 |
hwlock: hwspinlock@40500000 { |
| 215 |
compatible = "sprd,hwspinlock-r3p0"; |
| 216 |
reg = <0 0x40500000 0 0x1000>; |
| 217 |
#hwlock-cells = <1>; |
| 218 |
clocks = <&aon_gate CLK_SPLK_EB>; |
| 219 |
clock-names = "enable"; |
| 220 |
}; |
| 221 |
|
| 222 |
eic_debounce: gpio@40210000 { |
| 223 |
compatible = "sprd,sc9860-eic-debounce"; |
| 224 |
reg = <0 0x40210000 0 0x80>; |
| 225 |
gpio-controller; |
| 226 |
#gpio-cells = <2>; |
| 227 |
interrupt-controller; |
| 228 |
#interrupt-cells = <2>; |
| 229 |
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 230 |
}; |
| 231 |
|
| 232 |
eic_latch: gpio@40210080 { |
| 233 |
compatible = "sprd,sc9860-eic-latch"; |
| 234 |
reg = <0 0x40210080 0 0x20>; |
| 235 |
gpio-controller; |
| 236 |
#gpio-cells = <2>; |
| 237 |
interrupt-controller; |
| 238 |
#interrupt-cells = <2>; |
| 239 |
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 240 |
}; |
| 241 |
|
| 242 |
eic_async: gpio@402100a0 { |
| 243 |
compatible = "sprd,sc9860-eic-async"; |
| 244 |
reg = <0 0x402100a0 0 0x20>; |
| 245 |
gpio-controller; |
| 246 |
#gpio-cells = <2>; |
| 247 |
interrupt-controller; |
| 248 |
#interrupt-cells = <2>; |
| 249 |
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 250 |
}; |
| 251 |
|
| 252 |
eic_sync: gpio@402100c0 { |
| 253 |
compatible = "sprd,sc9860-eic-sync"; |
| 254 |
reg = <0 0x402100c0 0 0x20>; |
| 255 |
gpio-controller; |
| 256 |
#gpio-cells = <2>; |
| 257 |
interrupt-controller; |
| 258 |
#interrupt-cells = <2>; |
| 259 |
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 260 |
}; |
| 261 |
|
| 262 |
ap_gpio: gpio@40280000 { |
| 263 |
compatible = "sprd,sc9860-gpio"; |
| 264 |
reg = <0 0x40280000 0 0x1000>; |
| 265 |
gpio-controller; |
| 266 |
#gpio-cells = <2>; |
| 267 |
interrupt-controller; |
| 268 |
#interrupt-cells = <2>; |
| 269 |
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 270 |
}; |
| 271 |
|
| 272 |
pin_controller: pinctrl@402a0000 { |
| 273 |
compatible = "sprd,sc9860-pinctrl"; |
| 274 |
reg = <0 0x402a0000 0 0x10000>; |
| 275 |
}; |
| 276 |
|
| 277 |
watchdog@40310000 { |
| 278 |
compatible = "sprd,sp9860-wdt"; |
| 279 |
reg = <0 0x40310000 0 0x1000>; |
| 280 |
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 281 |
timeout-sec = <12>; |
| 282 |
clocks = <&aon_gate CLK_APCPU_WDG_EB>, |
| 283 |
<&aon_gate CLK_AP_WDG_RTC_EB>; |
| 284 |
clock-names = "enable", "rtc_enable"; |
| 285 |
}; |
| 286 |
}; |
| 287 |
|
| 288 |
agcp-bus { |
| 289 |
compatible = "simple-bus"; |
| 290 |
#address-cells = <2>; |
| 291 |
#size-cells = <2>; |
| 292 |
ranges; |
| 293 |
|
| 294 |
agcp_dma: dma-controller@41580000 { |
| 295 |
compatible = "sprd,sc9860-dma"; |
| 296 |
reg = <0 0x41580000 0 0x4000>; |
| 297 |
#dma-cells = <1>; |
| 298 |
/* For backwards compatibility: */ |
| 299 |
#dma-channels = <32>; |
| 300 |
dma-channels = <32>; |
| 301 |
clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>, |
| 302 |
<&agcp_gate CLK_AGCP_AP_ASHB_EB>; |
| 303 |
clock-names = "enable", "ashb_eb"; |
| 304 |
}; |
| 305 |
}; |
| 306 |
}; |
| 307 |
|
| 308 |
ext_32k: ext_32k { |
| 309 |
compatible = "fixed-clock"; |
| 310 |
#clock-cells = <0>; |
| 311 |
clock-frequency = <32768>; |
| 312 |
clock-output-names = "ext-32k"; |
| 313 |
}; |
| 314 |
|
| 315 |
ext_26m: ext_26m { |
| 316 |
compatible = "fixed-clock"; |
| 317 |
#clock-cells = <0>; |
| 318 |
clock-frequency = <26000000>; |
| 319 |
clock-output-names = "ext-26m"; |
| 320 |
}; |
| 321 |
|
| 322 |
ext_rco_100m: ext_rco_100m { |
| 323 |
compatible = "fixed-clock"; |
| 324 |
#clock-cells = <0>; |
| 325 |
clock-frequency = <100000000>; |
| 326 |
clock-output-names = "ext-rco-100m"; |
| 327 |
}; |
| 328 |
|
| 329 |
clk_l0_409m6: clk_l0_409m6 { |
| 330 |
compatible = "fixed-clock"; |
| 331 |
#clock-cells = <0>; |
| 332 |
clock-frequency = <409600000>; |
| 333 |
clock-output-names = "ext-409m6"; |
| 334 |
}; |
| 335 |
}; |