| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2025 Joseph Kogut <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/* |
| 7 |
* CM5 IO board data sheet |
| 8 |
* https://dl.radxa.com/cm5/v2200/radxa_cm5_io_v2200_schematic.pdf |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
#include "rk3588s.dtsi" |
| 13 |
#include "rk3588s-radxa-cm5.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Radxa Compute Module 5 (CM5) IO Board"; |
| 17 |
compatible = "radxa,cm5-io", "radxa,cm5", "rockchip,rk3588s"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
ethernet0 = &gmac1; |
| 21 |
mmc1 = &sdmmc; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { |
| 25 |
stdout-path = "serial2:1500000n8"; |
| 26 |
}; |
| 27 |
|
| 28 |
hdmi-con { |
| 29 |
compatible = "hdmi-connector"; |
| 30 |
type = "a"; |
| 31 |
|
| 32 |
port { |
| 33 |
hdmi_con_in: endpoint { |
| 34 |
remote-endpoint = <&hdmi0_out_con>; |
| 35 |
}; |
| 36 |
}; |
| 37 |
}; |
| 38 |
|
| 39 |
vcc12v_dcin: regulator-12v0-vcc-dcin { |
| 40 |
compatible = "regulator-fixed"; |
| 41 |
regulator-name = "vcc12v_dcin"; |
| 42 |
regulator-always-on; |
| 43 |
regulator-boot-on; |
| 44 |
regulator-min-microvolt = <12000000>; |
| 45 |
regulator-max-microvolt = <12000000>; |
| 46 |
}; |
| 47 |
|
| 48 |
vcc5v0_host: vcc5v0-host-regulator { |
| 49 |
compatible = "regulator-fixed"; |
| 50 |
regulator-name = "vcc5v0_host"; |
| 51 |
regulator-boot-on; |
| 52 |
regulator-always-on; |
| 53 |
regulator-min-microvolt = <5000000>; |
| 54 |
regulator-max-microvolt = <5000000>; |
| 55 |
enable-active-high; |
| 56 |
gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; |
| 57 |
pinctrl-names = "default"; |
| 58 |
pinctrl-0 = <&vcc5v0_host_en>; |
| 59 |
vin-supply = <&vcc5v0_sys>; |
| 60 |
}; |
| 61 |
|
| 62 |
vcc5v0_sys: regulator-5v0-sys { |
| 63 |
compatible = "regulator-fixed"; |
| 64 |
regulator-name = "vcc5v0_sys"; |
| 65 |
regulator-always-on; |
| 66 |
regulator-boot-on; |
| 67 |
regulator-min-microvolt = <5000000>; |
| 68 |
regulator-max-microvolt = <5000000>; |
| 69 |
vin-supply = <&vcc12v_dcin>; |
| 70 |
}; |
| 71 |
|
| 72 |
vbus5v0_typec: vbus5v0-typec { |
| 73 |
compatible = "regulator-fixed"; |
| 74 |
regulator-name = "vbus5v0_typec"; |
| 75 |
gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; |
| 76 |
pinctrl-names = "default"; |
| 77 |
pinctrl-0 = <&vbus5v0_typec_en>; |
| 78 |
enable-active-high; |
| 79 |
regulator-min-microvolt = <5000000>; |
| 80 |
regulator-max-microvolt = <5000000>; |
| 81 |
vin-supply = <&vcc5v0_sys>; |
| 82 |
}; |
| 83 |
|
| 84 |
vcc3v3_pcie: regulator-3v3-vcc-pcie { |
| 85 |
compatible = "regulator-fixed"; |
| 86 |
regulator-name = "vcc3v3_pcie2x1l0"; |
| 87 |
regulator-min-microvolt = <3300000>; |
| 88 |
regulator-max-microvolt = <3300000>; |
| 89 |
enable-active-high; |
| 90 |
gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>; |
| 91 |
startup-delay-us = <50000>; |
| 92 |
vin-supply = <&vcc5v0_sys>; |
| 93 |
}; |
| 94 |
|
| 95 |
vcc_3v3_s0: pldo-reg4 { |
| 96 |
compatible = "regulator-fixed"; |
| 97 |
regulator-name = "vcc_3v3_s0"; |
| 98 |
regulator-always-on; |
| 99 |
regulator-boot-on; |
| 100 |
regulator-min-microvolt = <3300000>; |
| 101 |
regulator-max-microvolt = <3300000>; |
| 102 |
regulator-ramp-delay = <12500>; |
| 103 |
|
| 104 |
regulator-state-mem { |
| 105 |
regulator-off-in-suspend; |
| 106 |
}; |
| 107 |
}; |
| 108 |
}; |
| 109 |
|
| 110 |
&combphy0_ps { |
| 111 |
status = "okay"; |
| 112 |
}; |
| 113 |
|
| 114 |
&combphy2_psu { |
| 115 |
status = "okay"; |
| 116 |
}; |
| 117 |
|
| 118 |
&gmac1 { |
| 119 |
status = "okay"; |
| 120 |
}; |
| 121 |
|
| 122 |
&hdmi0 { |
| 123 |
status = "okay"; |
| 124 |
}; |
| 125 |
|
| 126 |
&hdmi0_in { |
| 127 |
hdmi0_in_vp0: endpoint { |
| 128 |
remote-endpoint = <&vp0_out_hdmi0>; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
&hdmi0_out { |
| 133 |
hdmi0_out_con: endpoint { |
| 134 |
remote-endpoint = <&hdmi_con_in>; |
| 135 |
}; |
| 136 |
}; |
| 137 |
|
| 138 |
&hdmi0_sound { |
| 139 |
status = "okay"; |
| 140 |
}; |
| 141 |
|
| 142 |
&hdptxphy0 { |
| 143 |
status = "okay"; |
| 144 |
}; |
| 145 |
|
| 146 |
&i2c6 { |
| 147 |
pinctrl-names = "default"; |
| 148 |
pinctrl-0 = <&i2c6m3_xfer>; |
| 149 |
status = "okay"; |
| 150 |
|
| 151 |
fusb302: usb-typec@22 { |
| 152 |
compatible = "fcs,fusb302"; |
| 153 |
reg = <0x22>; |
| 154 |
interrupt-parent = <&gpio0>; |
| 155 |
interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>; |
| 156 |
pinctrl-names = "default"; |
| 157 |
pinctrl-0 = <&usbc0_int>; |
| 158 |
vbus-supply = <&vbus5v0_typec>; |
| 159 |
|
| 160 |
connector { |
| 161 |
compatible = "usb-c-connector"; |
| 162 |
data-role = "dual"; |
| 163 |
label = "USB-C"; |
| 164 |
power-role = "dual"; |
| 165 |
try-power-role = "sink"; |
| 166 |
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; |
| 167 |
sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; |
| 168 |
op-sink-microwatt = <1000000>; |
| 169 |
|
| 170 |
ports { |
| 171 |
#address-cells = <1>; |
| 172 |
#size-cells = <0>; |
| 173 |
|
| 174 |
port@0 { |
| 175 |
reg = <0>; |
| 176 |
usbc0_orientation_switch: endpoint { |
| 177 |
remote-endpoint = <&usbdp_phy0_orientation_switch>; |
| 178 |
}; |
| 179 |
}; |
| 180 |
|
| 181 |
port@1 { |
| 182 |
reg = <1>; |
| 183 |
usbc0_role_switch: endpoint { |
| 184 |
remote-endpoint = <&usb_host0_xhci_role_switch>; |
| 185 |
}; |
| 186 |
}; |
| 187 |
|
| 188 |
port@2 { |
| 189 |
reg = <2>; |
| 190 |
usbc0_dp_altmode_mux: endpoint { |
| 191 |
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; |
| 192 |
}; |
| 193 |
}; |
| 194 |
}; |
| 195 |
}; |
| 196 |
}; |
| 197 |
}; |
| 198 |
|
| 199 |
&i2s5_8ch { |
| 200 |
status = "okay"; |
| 201 |
}; |
| 202 |
|
| 203 |
&pcie2x1l2 { |
| 204 |
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; |
| 205 |
vpcie3v3-supply = <&vcc3v3_pcie>; |
| 206 |
status = "okay"; |
| 207 |
}; |
| 208 |
|
| 209 |
&pinctrl { |
| 210 |
fusb302 { |
| 211 |
vbus5v0_typec_en: vbus5v0-typec-en { |
| 212 |
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 213 |
}; |
| 214 |
|
| 215 |
usbc0_int: usbc0-int { |
| 216 |
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 217 |
}; |
| 218 |
}; |
| 219 |
|
| 220 |
usb { |
| 221 |
vcc5v0_host_en: vcc5v0-host-en { |
| 222 |
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 223 |
}; |
| 224 |
}; |
| 225 |
}; |
| 226 |
|
| 227 |
&sdmmc { |
| 228 |
bus-width = <4>; |
| 229 |
cap-mmc-highspeed; |
| 230 |
cap-sd-highspeed; |
| 231 |
disable-wp; |
| 232 |
no-sdio; |
| 233 |
sd-uhs-sdr104; |
| 234 |
pinctrl-names = "default"; |
| 235 |
pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>; |
| 236 |
vmmc-supply = <&vcc_3v3_s3>; |
| 237 |
vqmmc-supply = <&vccio_sd_s0>; |
| 238 |
status = "okay"; |
| 239 |
}; |
| 240 |
|
| 241 |
&u2phy0 { |
| 242 |
status = "okay"; |
| 243 |
}; |
| 244 |
|
| 245 |
&u2phy0_otg { |
| 246 |
status = "okay"; |
| 247 |
}; |
| 248 |
|
| 249 |
&u2phy2 { |
| 250 |
status = "okay"; |
| 251 |
}; |
| 252 |
|
| 253 |
&u2phy2_host { |
| 254 |
status = "okay"; |
| 255 |
}; |
| 256 |
|
| 257 |
&u2phy3 { |
| 258 |
status = "okay"; |
| 259 |
}; |
| 260 |
|
| 261 |
&u2phy3_host { |
| 262 |
status = "okay"; |
| 263 |
}; |
| 264 |
|
| 265 |
&uart2 { |
| 266 |
pinctrl-names = "default"; |
| 267 |
pinctrl-0 = <&uart2m0_xfer>; |
| 268 |
status = "okay"; |
| 269 |
}; |
| 270 |
|
| 271 |
&usb_host0_ehci { |
| 272 |
status = "okay"; |
| 273 |
}; |
| 274 |
|
| 275 |
&usb_host0_ohci { |
| 276 |
status = "okay"; |
| 277 |
}; |
| 278 |
|
| 279 |
&usb_host0_xhci { |
| 280 |
dr_mode = "otg"; |
| 281 |
usb-role-switch; |
| 282 |
status = "okay"; |
| 283 |
|
| 284 |
port { |
| 285 |
usb_host0_xhci_role_switch: endpoint { |
| 286 |
remote-endpoint = <&usbc0_role_switch>; |
| 287 |
}; |
| 288 |
}; |
| 289 |
}; |
| 290 |
|
| 291 |
&usb_host1_ehci { |
| 292 |
status = "okay"; |
| 293 |
}; |
| 294 |
|
| 295 |
&usb_host1_ohci { |
| 296 |
status = "okay"; |
| 297 |
}; |
| 298 |
|
| 299 |
&usb_host2_xhci { |
| 300 |
status = "okay"; |
| 301 |
}; |
| 302 |
|
| 303 |
&usbdp_phy0 { |
| 304 |
mode-switch; |
| 305 |
orientation-switch; |
| 306 |
sbu1-dc-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; |
| 307 |
sbu2-dc-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; |
| 308 |
status = "okay"; |
| 309 |
|
| 310 |
port { |
| 311 |
#address-cells = <1>; |
| 312 |
#size-cells = <0>; |
| 313 |
|
| 314 |
usbdp_phy0_orientation_switch: endpoint@0 { |
| 315 |
reg = <0>; |
| 316 |
remote-endpoint = <&usbc0_orientation_switch>; |
| 317 |
}; |
| 318 |
|
| 319 |
usbdp_phy0_dp_altmode_mux: endpoint@1 { |
| 320 |
reg = <1>; |
| 321 |
remote-endpoint = <&usbc0_dp_altmode_mux>; |
| 322 |
}; |
| 323 |
}; |
| 324 |
}; |
| 325 |
|
| 326 |
&vop { |
| 327 |
status = "okay"; |
| 328 |
}; |
| 329 |
|
| 330 |
&vop_mmu { |
| 331 |
status = "okay"; |
| 332 |
}; |
| 333 |
|
| 334 |
&vp0 { |
| 335 |
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 336 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 337 |
remote-endpoint = <&hdmi0_in_vp0>; |
| 338 |
}; |
| 339 |
}; |