| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/gpio/gpio.h> |
| 6 |
#include <dt-bindings/input/input.h> |
| 7 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 8 |
#include <dt-bindings/leds/common.h> |
| 9 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 10 |
#include <dt-bindings/pwm/pwm.h> |
| 11 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 12 |
|
| 13 |
#include "rk3588s-orangepi-cm5.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Xunlong Orange Pi CM5 Base"; |
| 17 |
compatible = "xunlong,orangepi-cm5-base", "xunlong,orangepi-cm5", "rockchip,rk3588s"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
ethernet0 = &gmac1; |
| 21 |
mmc1 = &sdmmc; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { |
| 25 |
stdout-path = "serial2:1500000n8"; |
| 26 |
}; |
| 27 |
|
| 28 |
gpio-keys { |
| 29 |
compatible = "gpio-keys"; |
| 30 |
pinctrl-names = "default"; |
| 31 |
pinctrl-0 = <&key1_pin>; |
| 32 |
|
| 33 |
button { |
| 34 |
debounce-interval = <50>; |
| 35 |
gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>; |
| 36 |
label = "USERKEY"; |
| 37 |
linux,code = <BTN_MISC>; |
| 38 |
wakeup-source; |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
hdmi0-con { |
| 43 |
compatible = "hdmi-connector"; |
| 44 |
type = "a"; |
| 45 |
|
| 46 |
port { |
| 47 |
hdmi0_con_in: endpoint { |
| 48 |
remote-endpoint = <&hdmi0_out_con>; |
| 49 |
}; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
pwm-leds { |
| 54 |
compatible = "pwm-leds"; |
| 55 |
|
| 56 |
led-1 { |
| 57 |
color = <LED_COLOR_ID_RED>; |
| 58 |
function = LED_FUNCTION_STATUS; |
| 59 |
linux,default-trigger = "heartbeat"; |
| 60 |
max-brightness = <255>; |
| 61 |
pwms = <&pwm2 0 25000 0>; |
| 62 |
}; |
| 63 |
|
| 64 |
led-2 { |
| 65 |
color = <LED_COLOR_ID_GREEN>; |
| 66 |
function = LED_FUNCTION_WAN; |
| 67 |
max-brightness = <255>; |
| 68 |
pwms = <&pwm4 0 25000 PWM_POLARITY_INVERTED>; |
| 69 |
}; |
| 70 |
|
| 71 |
led-3 { |
| 72 |
color = <LED_COLOR_ID_GREEN>; |
| 73 |
function = LED_FUNCTION_LAN; |
| 74 |
function-enumerator = <0>; |
| 75 |
max-brightness = <255>; |
| 76 |
pwms = <&pwm5 0 25000 PWM_POLARITY_INVERTED>; |
| 77 |
}; |
| 78 |
|
| 79 |
led-4 { |
| 80 |
color = <LED_COLOR_ID_GREEN>; |
| 81 |
function = LED_FUNCTION_LAN; |
| 82 |
function-enumerator = <1>; |
| 83 |
max-brightness = <255>; |
| 84 |
pwms = <&pwm6 0 25000 0>; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
vbus_5v0: regulator-vbus-5v0 { |
| 89 |
compatible = "regulator-fixed"; |
| 90 |
enable-active-high; |
| 91 |
gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; |
| 92 |
pinctrl-names = "default"; |
| 93 |
pinctrl-0 = <&vbus_5v0_en_pin>; |
| 94 |
regulator-name = "vbus_5v0"; |
| 95 |
regulator-min-microvolt = <5000000>; |
| 96 |
regulator-max-microvolt = <5000000>; |
| 97 |
vin-supply = <&vcc5v0_sys>; |
| 98 |
}; |
| 99 |
|
| 100 |
vcc_3v3: regulator-vcc-3v3 { |
| 101 |
compatible = "regulator-fixed"; |
| 102 |
enable-active-high; |
| 103 |
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; |
| 104 |
pinctrl-names = "default"; |
| 105 |
pinctrl-0 = <&vcc_3v3_en_pin>; |
| 106 |
regulator-name = "vcc_3v3"; |
| 107 |
regulator-min-microvolt = <3300000>; |
| 108 |
regulator-max-microvolt = <3300000>; |
| 109 |
startup-delay-us = <50000>; |
| 110 |
vin-supply = <&vcc5v0_sys>; |
| 111 |
}; |
| 112 |
|
| 113 |
vcc5v0_sys: regulator-vcc-5v0 { |
| 114 |
compatible = "regulator-fixed"; |
| 115 |
regulator-name = "vcc5v0_sys"; |
| 116 |
regulator-always-on; |
| 117 |
regulator-boot-on; |
| 118 |
regulator-min-microvolt = <5000000>; |
| 119 |
regulator-max-microvolt = <5000000>; |
| 120 |
}; |
| 121 |
}; |
| 122 |
|
| 123 |
&combphy0_ps { |
| 124 |
status = "okay"; |
| 125 |
}; |
| 126 |
|
| 127 |
&combphy2_psu { |
| 128 |
status = "okay"; |
| 129 |
}; |
| 130 |
|
| 131 |
&gmac1 { |
| 132 |
clock_in_out = "output"; |
| 133 |
phy-handle = <&rgmii_phy>; |
| 134 |
phy-mode = "rgmii-id"; |
| 135 |
phy-supply = <&vcc_3v3>; |
| 136 |
pinctrl-names = "default"; |
| 137 |
pinctrl-0 = <&gmac1_miim |
| 138 |
&gmac1_rx_bus2 |
| 139 |
&gmac1_tx_bus2 |
| 140 |
&gmac1_rgmii_clk |
| 141 |
&gmac1_rgmii_bus>; |
| 142 |
status = "okay"; |
| 143 |
}; |
| 144 |
|
| 145 |
&hdmi0 { |
| 146 |
pinctrl-names = "default"; |
| 147 |
pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd |
| 148 |
&hdmim0_tx0_scl &hdmim0_tx0_sda |
| 149 |
&hdmi_frl_pin>; |
| 150 |
status = "okay"; |
| 151 |
}; |
| 152 |
|
| 153 |
&hdmi0_in { |
| 154 |
hdmi0_in_vp0: endpoint { |
| 155 |
remote-endpoint = <&vp0_out_hdmi0>; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
&hdmi0_out { |
| 160 |
hdmi0_out_con: endpoint { |
| 161 |
remote-endpoint = <&hdmi0_con_in>; |
| 162 |
}; |
| 163 |
}; |
| 164 |
|
| 165 |
&hdmi0_sound { |
| 166 |
status = "okay"; |
| 167 |
}; |
| 168 |
|
| 169 |
&hdptxphy0 { |
| 170 |
status = "okay"; |
| 171 |
}; |
| 172 |
|
| 173 |
&i2c1 { |
| 174 |
pinctrl-0 = <&i2c1m2_xfer>; |
| 175 |
status = "okay"; |
| 176 |
|
| 177 |
rtc@51 { |
| 178 |
compatible = "haoyu,hym8563"; |
| 179 |
reg = <0x51>; |
| 180 |
#clock-cells = <0>; |
| 181 |
clock-output-names = "hym8563"; |
| 182 |
interrupt-parent = <&gpio0>; |
| 183 |
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; |
| 184 |
pinctrl-names = "default"; |
| 185 |
pinctrl-0 = <&rtc_int_pin>; |
| 186 |
wakeup-source; |
| 187 |
}; |
| 188 |
}; |
| 189 |
|
| 190 |
&i2s5_8ch { |
| 191 |
status = "okay"; |
| 192 |
}; |
| 193 |
|
| 194 |
&mdio1 { |
| 195 |
rgmii_phy: ethernet-phy@1 { |
| 196 |
/* YT8531C */ |
| 197 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 198 |
reg = <0x1>; |
| 199 |
pinctrl-names = "default"; |
| 200 |
pinctrl-0 = <&rgmii_phy_pin>; |
| 201 |
reset-assert-us = <20000>; |
| 202 |
reset-deassert-us = <100000>; |
| 203 |
reset-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>; |
| 204 |
}; |
| 205 |
}; |
| 206 |
|
| 207 |
&pcie2x1l1 { |
| 208 |
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; |
| 209 |
vpcie3v3-supply = <&vcc_3v3>; |
| 210 |
status = "okay"; |
| 211 |
}; |
| 212 |
|
| 213 |
&pcie2x1l2 { |
| 214 |
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; |
| 215 |
vpcie3v3-supply = <&vcc_3v3>; |
| 216 |
status = "okay"; |
| 217 |
}; |
| 218 |
|
| 219 |
&pinctrl { |
| 220 |
camera { |
| 221 |
cam1_reset_pin: cam1-reset-pin { |
| 222 |
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 223 |
}; |
| 224 |
cam2_reset_pin: cam2-reset-pin { |
| 225 |
rockchip,pins = <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 226 |
}; |
| 227 |
cam3_reset_pin: cam3-reset-pin { |
| 228 |
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 229 |
}; |
| 230 |
cam4_reset_pin: cam4-reset-pin { |
| 231 |
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 232 |
}; |
| 233 |
}; |
| 234 |
|
| 235 |
ethernet { |
| 236 |
rgmii_phy_pin: rgmii-phy-pin { |
| 237 |
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 238 |
}; |
| 239 |
}; |
| 240 |
|
| 241 |
gpio-key { |
| 242 |
key1_pin: key1-pin { |
| 243 |
rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; |
| 244 |
}; |
| 245 |
}; |
| 246 |
|
| 247 |
hdmi { |
| 248 |
hdmi_frl_pin: hdmi-frl-pin { |
| 249 |
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 250 |
}; |
| 251 |
}; |
| 252 |
|
| 253 |
power { |
| 254 |
vcc_3v3_en_pin: vcc-3v3-en-pin { |
| 255 |
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_down>; |
| 256 |
}; |
| 257 |
}; |
| 258 |
|
| 259 |
rtc { |
| 260 |
rtc_int_pin: rtc-int-pin { |
| 261 |
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 262 |
}; |
| 263 |
}; |
| 264 |
|
| 265 |
usb { |
| 266 |
vbus_5v0_en_pin: vbus-5v0-en-pin { |
| 267 |
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 268 |
}; |
| 269 |
}; |
| 270 |
}; |
| 271 |
|
| 272 |
&pwm2 { |
| 273 |
status = "okay"; |
| 274 |
}; |
| 275 |
|
| 276 |
&pwm4 { |
| 277 |
status = "okay"; |
| 278 |
}; |
| 279 |
|
| 280 |
&pwm5 { |
| 281 |
pinctrl-0 = <&pwm5m1_pins>; |
| 282 |
status = "okay"; |
| 283 |
}; |
| 284 |
|
| 285 |
&pwm6 { |
| 286 |
status = "okay"; |
| 287 |
}; |
| 288 |
|
| 289 |
&sdmmc { |
| 290 |
bus-width = <4>; |
| 291 |
cap-sd-highspeed; |
| 292 |
disable-wp; |
| 293 |
max-frequency = <150000000>; |
| 294 |
no-mmc; |
| 295 |
no-sdio; |
| 296 |
sd-uhs-sdr104; |
| 297 |
vmmc-supply = <&vcc_3v3_s3>; |
| 298 |
vqmmc-supply = <&vccio_sd_s0>; |
| 299 |
status = "okay"; |
| 300 |
}; |
| 301 |
|
| 302 |
&u2phy0 { |
| 303 |
status = "okay"; |
| 304 |
}; |
| 305 |
|
| 306 |
&u2phy0_otg { |
| 307 |
phy-supply = <&vbus_5v0>; |
| 308 |
status = "okay"; |
| 309 |
}; |
| 310 |
|
| 311 |
&u2phy2 { |
| 312 |
status = "okay"; |
| 313 |
}; |
| 314 |
|
| 315 |
&u2phy2_host { |
| 316 |
phy-supply = <&vbus_5v0>; |
| 317 |
status = "okay"; |
| 318 |
}; |
| 319 |
|
| 320 |
&uart2 { |
| 321 |
pinctrl-0 = <&uart2m0_xfer>; |
| 322 |
status = "okay"; |
| 323 |
}; |
| 324 |
|
| 325 |
&usb_host0_ehci { |
| 326 |
status = "okay"; |
| 327 |
}; |
| 328 |
|
| 329 |
&usb_host0_ohci { |
| 330 |
status = "okay"; |
| 331 |
}; |
| 332 |
|
| 333 |
&usb_host0_xhci { |
| 334 |
dr_mode = "host"; |
| 335 |
status = "okay"; |
| 336 |
}; |
| 337 |
|
| 338 |
&usbdp_phy0 { |
| 339 |
status = "okay"; |
| 340 |
}; |
| 341 |
|
| 342 |
&vop { |
| 343 |
status = "okay"; |
| 344 |
}; |
| 345 |
|
| 346 |
&vop_mmu { |
| 347 |
status = "okay"; |
| 348 |
}; |
| 349 |
|
| 350 |
&vp0 { |
| 351 |
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 352 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 353 |
remote-endpoint = <&hdmi0_in_vp0>; |
| 354 |
}; |
| 355 |
}; |