Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3588s-indiedroid-nova.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3 /dts-v1/;
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include <dt-bindings/soc/rockchip,vop2.h>
9 #include <dt-bindings/usb/pd.h>
10 #include "rk3588s.dtsi"
11
12 / {
13 model = "Indiedroid Nova";
14 chassis-type = "embedded";
15 compatible = "indiedroid,nova", "rockchip,rk3588s";
16
17 adc-keys-0 {
18 compatible = "adc-keys";
19 io-channel-names = "buttons";
20 io-channels = <&saradc 0>;
21 keyup-threshold-microvolt = <1800000>;
22 poll-interval = <100>;
23
24 button-boot {
25 label = "boot";
26 linux,code = <KEY_PROG1>;
27 press-threshold-microvolt = <18000>;
28 };
29 };
30
31 adc-keys-1 {
32 compatible = "adc-keys";
33 io-channel-names = "buttons";
34 io-channels = <&saradc 1>;
35 keyup-threshold-microvolt = <1800000>;
36 poll-interval = <100>;
37
38 button-recovery {
39 label = "recovery";
40 linux,code = <KEY_PROG2>;
41 press-threshold-microvolt = <18000>;
42 };
43 };
44
45 aliases {
46 mmc0 = &sdhci;
47 mmc1 = &sdmmc;
48 mmc2 = &sdio;
49 };
50
51 chosen {
52 stdout-path = "serial2:1500000n8";
53 };
54
55 hdmi0-con {
56 compatible = "hdmi-connector";
57 type = "d";
58
59 port {
60 hdmi0_con_in: endpoint {
61 remote-endpoint = <&hdmi0_out_con>;
62 };
63 };
64 };
65
66 sdio_pwrseq: sdio-pwrseq {
67 compatible = "mmc-pwrseq-simple";
68 clock-names = "ext_clock";
69 clocks = <&rtc_hym8563>;
70 pinctrl-0 = <&wifi_enable_h>;
71 pinctrl-names = "default";
72 post-power-on-delay-ms = <200>;
73 reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
74 };
75
76 sound {
77 compatible = "audio-graph-card";
78 label = "rockchip,es8388";
79 widgets = "Microphone", "Mic Jack",
80 "Headphone", "Headphones";
81 routing = "LINPUT2", "Mic Jack",
82 "Headphones", "LOUT1",
83 "Headphones", "ROUT1";
84 dais = <&i2s0_8ch_p0>;
85 };
86
87 vbus5v0_typec: regulator-vbus5v0-typec {
88 compatible = "regulator-fixed";
89 enable-active-high;
90 gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
91 pinctrl-0 = <&typec5v_pwren>;
92 pinctrl-names = "default";
93 regulator-name = "vbus5v0_typec";
94 regulator-min-microvolt = <5000000>;
95 regulator-max-microvolt = <5000000>;
96 vin-supply = <&vcc5v0_usb>;
97 };
98
99 vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
100 compatible = "regulator-fixed";
101 regulator-always-on;
102 regulator-boot-on;
103 regulator-max-microvolt = <1100000>;
104 regulator-min-microvolt = <1100000>;
105 regulator-name = "vcc_1v1_nldo_s3";
106 vin-supply = <&vcc5v0_sys>;
107 };
108
109 /* Regulator is enabled whenever vcc_1v8_s0 is above 1.6v */
110 vcc_3v3_s0: regulator-vcc-3v3-s0 {
111 compatible = "regulator-fixed";
112 regulator-always-on;
113 regulator-boot-on;
114 regulator-max-microvolt = <3300000>;
115 regulator-min-microvolt = <3300000>;
116 regulator-name = "vcc_3v3_s0";
117 vin-supply = <&vcc_3v3_s3>;
118
119 regulator-state-mem {
120 regulator-off-in-suspend;
121 };
122 };
123
124 vcc5v0_sys: regulator-vcc5v0-sys {
125 compatible = "regulator-fixed";
126 regulator-always-on;
127 regulator-boot-on;
128 regulator-max-microvolt = <5000000>;
129 regulator-min-microvolt = <5000000>;
130 regulator-name = "vcc5v0_sys";
131 };
132
133 vcc5v0_usb: regulator-vcc5v0-usb {
134 compatible = "regulator-fixed";
135 regulator-always-on;
136 regulator-boot-on;
137 regulator-max-microvolt = <5000000>;
138 regulator-min-microvolt = <5000000>;
139 regulator-name = "vcc5v0_usb";
140 vin-supply = <&vcc5v0_usbdcin>;
141 };
142
143 vcc5v0_usbdcin: regulator-vcc5v0-usbdcin {
144 compatible = "regulator-fixed";
145 regulator-always-on;
146 regulator-boot-on;
147 regulator-max-microvolt = <5000000>;
148 regulator-min-microvolt = <5000000>;
149 regulator-name = "vcc5v0_usbdcin";
150 };
151 };
152
153 &combphy0_ps {
154 status = "okay";
155 };
156
157 &combphy2_psu {
158 status = "okay";
159 };
160
161 &cpu_l0 {
162 cpu-supply = <&vdd_cpu_lit_s0>;
163 };
164
165 &cpu_l1 {
166 cpu-supply = <&vdd_cpu_lit_s0>;
167 };
168
169 &cpu_l2 {
170 cpu-supply = <&vdd_cpu_lit_s0>;
171 };
172
173 &cpu_l3 {
174 cpu-supply = <&vdd_cpu_lit_s0>;
175 };
176
177 &cpu_b0 {
178 cpu-supply = <&vdd_cpu_big0_s0>;
179 };
180
181 &cpu_b1 {
182 cpu-supply = <&vdd_cpu_big0_s0>;
183 };
184
185 &cpu_b2 {
186 cpu-supply = <&vdd_cpu_big1_s0>;
187 };
188
189 &cpu_b3 {
190 cpu-supply = <&vdd_cpu_big1_s0>;
191 };
192
193 &dp0 {
194 status = "okay";
195 };
196
197 &dp0_in {
198 dp0_in_vp1: endpoint {
199 remote-endpoint = <&vp1_out_dp0>;
200 };
201 };
202
203 &dp0_out {
204 dp0_out_con: endpoint {
205 remote-endpoint = <&usbdp_phy0_dp_in>;
206 };
207 };
208
209 /*
210 * Add labels for each GPIO pin exposed on the 40 pin header. Note that
211 * voltage of each GPIO pin could be either 3.3v or 1.8v (as noted by
212 * label).
213 */
214 &gpio0 {
215 gpio-line-names = /* GPIO0 A0-A7 */
216 "", "", "", "",
217 "", "", "", "",
218 /* GPIO0 B0-B7 */
219 "", "", "", "",
220 "", "", "", "",
221 /* GPIO0 C0-C7 */
222 "", "", "", "",
223 "", "", "", "",
224 /* GPIO0 D0-D7 */
225 "HEADER_12_1v8", "", "", "HEADER_24_1v8",
226 "", "", "", "";
227 };
228
229 &gpio1 {
230 gpio-line-names = /* GPIO1 A0-A7 */
231 "HEADER_27_3v3", "", "", "",
232 "HEADER_29_1v8", "", "HEADER_7_1v8", "",
233 /* GPIO1 B0-B7 */
234 "", "HEADER_31_1v8", "HEADER_33_1v8", "",
235 "HEADER_11_1v8", "HEADER_13_1v8", "", "",
236 /* GPIO1 C0-C7 */
237 "", "HEADER_28_3v3", "", "",
238 "", "", "", "",
239 /* GPIO1 D0-D7 */
240 "", "", "", "",
241 "", "", "HEADER_5_3v3", "HEADER_3_3v3";
242 };
243
244 &gpio3 {
245 gpio-line-names = /* GPIO3 A0-A7 */
246 "", "", "", "",
247 "", "", "", "",
248 /* GPIO3 B0-B7 */
249 "HEADER_16_1v8", "HEADER_18_1v8", "", "",
250 "", "", "", "HEADER_19_1v8",
251 /* GPIO3 C0-C7 */
252 "HEADER_21_1v8", "HEADER_23_1v8", "", "HEADER_26_1v8",
253 "HEADER_15_1v8", "HEADER_22_1v8", "", "",
254 /* GPIO3 D0-D7 */
255 "", "", "", "",
256 "", "", "", "";
257 };
258
259 &gpio4 {
260 gpio-line-names = /* GPIO4 A0-A7 */
261 "", "", "HEADER_37_3v3", "HEADER_8_3v3",
262 "HEADER_10_3v3", "", "HEADER_32_3v3", "HEADER_35_3v3",
263 /* GPIO4 B0-B7 */
264 "", "", "", "HEADER_40_3v3",
265 "HEADER_38_3v3", "HEADER_36_3v3", "", "",
266 /* GPIO4 C0-C7 */
267 "", "", "", "",
268 "", "", "", "",
269 /* GPIO4 D0-D7 */
270 "", "", "", "",
271 "", "", "", "";
272 };
273
274 &gpu {
275 mali-supply = <&vdd_gpu_s0>;
276 status = "okay";
277 };
278
279 &hdmi0 {
280 pinctrl-0 = <&hdmim0_tx0_scl>, <&hdmim0_tx0_sda>,
281 <&hdmim0_tx0_hpd>, <&hdmim0_tx0_cec>;
282 pinctrl-names = "default";
283 status = "okay";
284 };
285
286 &hdmi0_in {
287 hdmi0_in_vp0: endpoint {
288 remote-endpoint = <&vp0_out_hdmi0>;
289 };
290 };
291
292 &hdmi0_out {
293 hdmi0_out_con: endpoint {
294 remote-endpoint = <&hdmi0_con_in>;
295 };
296 };
297
298 &hdmi0_sound {
299 status = "okay";
300 };
301
302 &hdptxphy0 {
303 status = "okay";
304 };
305
306 &i2c0 {
307 pinctrl-0 = <&i2c0m2_xfer>;
308 pinctrl-names = "default";
309 status = "okay";
310
311 vdd_cpu_big0_s0: regulator@42 {
312 compatible = "rockchip,rk8602";
313 reg = <0x42>;
314 regulator-always-on;
315 regulator-boot-on;
316 regulator-max-microvolt = <1050000>;
317 regulator-min-microvolt = <550000>;
318 regulator-name = "vdd_cpu_big0_s0";
319 regulator-ramp-delay = <2300>;
320 fcs,suspend-voltage-selector = <1>;
321 vin-supply = <&vcc5v0_sys>;
322
323 regulator-state-mem {
324 regulator-off-in-suspend;
325 };
326 };
327
328 vdd_cpu_big1_s0: regulator@43 {
329 compatible = "rockchip,rk8603", "rockchip,rk8602";
330 reg = <0x43>;
331 regulator-always-on;
332 regulator-boot-on;
333 regulator-max-microvolt = <1050000>;
334 regulator-min-microvolt = <550000>;
335 regulator-name = "vdd_cpu_big1_s0";
336 regulator-ramp-delay = <2300>;
337 fcs,suspend-voltage-selector = <1>;
338 vin-supply = <&vcc5v0_sys>;
339
340 regulator-state-mem {
341 regulator-off-in-suspend;
342 };
343 };
344 };
345
346 &i2c2 {
347 status = "okay";
348
349 vdd_npu_s0: regulator@42 {
350 compatible = "rockchip,rk8602";
351 reg = <0x42>;
352 regulator-always-on;
353 regulator-boot-on;
354 regulator-max-microvolt = <950000>;
355 regulator-min-microvolt = <550000>;
356 regulator-name = "vdd_npu_s0";
357 regulator-ramp-delay = <2300>;
358 fcs,suspend-voltage-selector = <1>;
359 vin-supply = <&vcc5v0_sys>;
360
361 regulator-state-mem {
362 regulator-off-in-suspend;
363 };
364 };
365 };
366
367 &i2c6 {
368 pinctrl-0 = <&i2c6m3_xfer>;
369 status = "okay";
370
371 fusb302: typec-portc@22 {
372 compatible = "fcs,fusb302";
373 reg = <0x22>;
374 interrupt-parent = <&gpio0>;
375 interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
376 pinctrl-0 = <&usbc0_int>;
377 pinctrl-names = "default";
378 vbus-supply = <&vbus5v0_typec>;
379
380 usb_con: connector {
381 compatible = "usb-c-connector";
382 data-role = "dual";
383 label = "USB-C";
384 power-role = "dual";
385 try-power-role = "sink";
386 source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
387 sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
388 op-sink-microwatt = <1000000>;
389
390 altmodes {
391 displayport {
392 svid = /bits/ 16 <0xff01>;
393 vdo = <0xffffffff>;
394 };
395 };
396
397
398 ports {
399 #address-cells = <1>;
400 #size-cells = <0>;
401
402 port@0 {
403 reg = <0>;
404 usbc0_hs: endpoint {
405 remote-endpoint = <&usb_host0_xhci_hs>;
406 };
407 };
408
409 port@1 {
410 reg = <1>;
411 usbc0_ss: endpoint {
412 remote-endpoint = <&usbdp_phy0_ss_out>;
413 };
414 };
415
416 port@2 {
417 reg = <2>;
418 usbc0_sbu: endpoint {
419 remote-endpoint = <&usbdp_phy0_dp_out>;
420 };
421 };
422 };
423 };
424 };
425
426 rtc_hym8563: rtc@51 {
427 compatible = "haoyu,hym8563";
428 reg = <0x51>;
429 #clock-cells = <0>;
430 clock-output-names = "hym8563";
431 interrupt-parent = <&gpio0>;
432 interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
433 pinctrl-0 = <&hym8563_int>, <&clk32k_in>;
434 pinctrl-names = "default";
435 wakeup-source;
436 };
437 };
438
439 &i2c7 {
440 pinctrl-0 = <&i2c7m0_xfer>;
441 status = "okay";
442
443 es8388: audio-codec@11 {
444 compatible = "everest,es8388", "everest,es8328";
445 reg = <0x11>;
446 assigned-clock-rates = <12288000>;
447 assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
448 AVDD-supply = <&vcc_3v3_s3>;
449 clocks = <&cru I2S0_8CH_MCLKOUT>;
450 DVDD-supply = <&vcc_1v8_s3>;
451 HPVDD-supply = <&vcc_3v3_s3>;
452 PVDD-supply = <&vcc_1v8_s3>;
453 #sound-dai-cells = <0>;
454
455 port {
456 es8388_p0_0: endpoint {
457 remote-endpoint = <&i2s0_8ch_p0_0>;
458 };
459 };
460 };
461 };
462
463 &i2s0_8ch {
464 pinctrl-names = "default";
465 pinctrl-0 = <&i2s0_lrck
466 &i2s0_mclk
467 &i2s0_sclk
468 &i2s0_sdi0
469 &i2s0_sdo0>;
470 status = "okay";
471
472 i2s0_8ch_p0: port {
473 i2s0_8ch_p0_0: endpoint {
474 dai-format = "i2s";
475 mclk-fs = <256>;
476 remote-endpoint = <&es8388_p0_0>;
477 };
478 };
479 };
480
481 &i2s5_8ch {
482 status = "okay";
483 };
484
485 &pcie2x1l2 {
486 pinctrl-0 = <&pcie20x1m0_perstn>, <&pcie20x1m0_clkreqn>,
487 <&pcie20x1m0_waken>;
488 pinctrl-names = "default";
489 reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
490 vpcie3v3-supply = <&vcc_3v3_s3>;
491 status = "okay";
492 };
493
494 &pd_gpu {
495 domain-supply = <&vdd_gpu_s0>;
496 };
497
498 &pd_npu {
499 domain-supply = <&vdd_npu_s0>;
500 };
501
502 &pinctrl {
503 bluetooth-pins {
504 bt_reset: bt-reset {
505 rockchip,pins =
506 <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
507 };
508
509 bt_wake_dev: bt-wake-dev {
510 rockchip,pins =
511 <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
512 };
513
514 bt_wake_host: bt-wake-host {
515 rockchip,pins =
516 <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
517 };
518 };
519
520 hym8563 {
521
522 hym8563_int: hym8563-int {
523 rockchip,pins =
524 <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
525 };
526 };
527
528 usb-typec {
529 usbc0_int: usbc0-int {
530 rockchip,pins =
531 <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
532 };
533
534 typec5v_pwren: typec5v-pwren {
535 rockchip,pins =
536 <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
537 };
538 };
539
540 wifi {
541 wifi_enable_h: wifi-enable-h {
542 rockchip,pins =
543 <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
544 };
545
546 wifi_host_wake_irq: wifi-host-wake-irq {
547 rockchip,pins =
548 <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
549 };
550 };
551 };
552
553 &rknn_core_0 {
554 npu-supply = <&vdd_npu_s0>;
555 sram-supply = <&vdd_npu_s0>;
556 status = "okay";
557 };
558
559 &rknn_core_1 {
560 npu-supply = <&vdd_npu_s0>;
561 sram-supply = <&vdd_npu_s0>;
562 status = "okay";
563 };
564
565 &rknn_core_2 {
566 npu-supply = <&vdd_npu_s0>;
567 sram-supply = <&vdd_npu_s0>;
568 status = "okay";
569 };
570
571 &rknn_mmu_0 {
572 status = "okay";
573 };
574
575 &rknn_mmu_1 {
576 status = "okay";
577 };
578
579 &rknn_mmu_2 {
580 status = "okay";
581 };
582
583 &saradc {
584 vref-supply = <&vcca_1v8_s0>;
585 status = "okay";
586 };
587
588 &sdhci {
589 bus-width = <8>;
590 mmc-hs400-1_8v;
591 mmc-hs400-enhanced-strobe;
592 no-sd;
593 no-sdio;
594 non-removable;
595 vmmc-supply = <&vcc_3v3_s0>;
596 vqmmc-supply = <&vcc_1v8_s3>;
597 status = "okay";
598 };
599
600 &sdio {
601 #address-cells = <1>;
602 bus-width = <4>;
603 cap-sd-highspeed;
604 cap-sdio-irq;
605 disable-wp;
606 keep-power-in-suspend;
607 max-frequency = <100000000>;
608 mmc-pwrseq = <&sdio_pwrseq>;
609 no-mmc;
610 no-sd;
611 non-removable;
612 sd-uhs-sdr104;
613 #size-cells = <0>;
614 vmmc-supply = <&vcc_3v3_s3>;
615 vqmmc-supply = <&vcc_1v8_s3>;
616 status = "okay";
617
618 sdio_wifi: wifi@1 {
619 reg = <1>;
620 interrupt-parent = <&gpio0>;
621 interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
622 interrupt-names = "host-wake";
623 pinctrl-0 = <&wifi_host_wake_irq>;
624 pinctrl-names = "default";
625 };
626 };
627
628 &sdmmc {
629 bus-width = <4>;
630 cap-mmc-highspeed;
631 cap-sd-highspeed;
632 disable-wp;
633 no-sdio;
634 no-mmc;
635 sd-uhs-sdr104;
636 vmmc-supply = <&vcc_3v3_s3>;
637 vqmmc-supply = <&vccio_sd_s0>;
638 status = "okay";
639 };
640
641 &spi2 {
642 #address-cells = <1>;
643 assigned-clocks = <&cru CLK_SPI2>;
644 assigned-clock-rates = <200000000>;
645 num-cs = <1>;
646 pinctrl-0 = <&spi2m2_pins>, <&spi2m2_cs0>;
647 pinctrl-names = "default";
648 #size-cells = <0>;
649 status = "okay";
650
651 pmic@0 {
652 compatible = "rockchip,rk806";
653 reg = <0x0>;
654 #gpio-cells = <2>;
655 gpio-controller;
656 interrupt-parent = <&gpio0>;
657 interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
658 pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
659 <&rk806_dvs2_null>, <&rk806_dvs3_null>;
660 pinctrl-names = "default";
661 spi-max-frequency = <1000000>;
662
663 vcc1-supply = <&vcc5v0_sys>;
664 vcc2-supply = <&vcc5v0_sys>;
665 vcc3-supply = <&vcc5v0_sys>;
666 vcc4-supply = <&vcc5v0_sys>;
667 vcc5-supply = <&vcc5v0_sys>;
668 vcc6-supply = <&vcc5v0_sys>;
669 vcc7-supply = <&vcc5v0_sys>;
670 vcc8-supply = <&vcc5v0_sys>;
671 vcc9-supply = <&vcc5v0_sys>;
672 vcc10-supply = <&vcc5v0_sys>;
673 vcc11-supply = <&vcc_2v0_pldo_s3>;
674 vcc12-supply = <&vcc5v0_sys>;
675 vcc13-supply = <&vcc_1v1_nldo_s3>;
676 vcc14-supply = <&vcc_1v1_nldo_s3>;
677 vcca-supply = <&vcc5v0_sys>;
678
679 rk806_dvs1_null: dvs1-null-pins {
680 pins = "gpio_pwrctrl1";
681 function = "pin_fun0";
682 };
683
684 rk806_dvs2_null: dvs2-null-pins {
685 pins = "gpio_pwrctrl2";
686 function = "pin_fun0";
687 };
688
689 rk806_dvs3_null: dvs3-null-pins {
690 pins = "gpio_pwrctrl3";
691 function = "pin_fun0";
692 };
693
694 regulators {
695 vdd_gpu_s0: dcdc-reg1 {
696 regulator-boot-on;
697 regulator-enable-ramp-delay = <400>;
698 regulator-max-microvolt = <950000>;
699 regulator-min-microvolt = <550000>;
700 regulator-name = "vdd_gpu_s0";
701 regulator-ramp-delay = <12500>;
702 regulator-state-mem {
703 regulator-off-in-suspend;
704 };
705 };
706
707 vdd_cpu_lit_s0: dcdc-reg2 {
708 regulator-always-on;
709 regulator-boot-on;
710 regulator-max-microvolt = <950000>;
711 regulator-min-microvolt = <550000>;
712 regulator-ramp-delay = <12500>;
713 regulator-name = "vdd_cpu_lit_s0";
714 regulator-state-mem {
715 regulator-off-in-suspend;
716 };
717 };
718
719 vdd_logic_s0: dcdc-reg3 {
720 regulator-always-on;
721 regulator-boot-on;
722 regulator-max-microvolt = <750000>;
723 regulator-min-microvolt = <675000>;
724 regulator-name = "vdd_logic_s0";
725 regulator-ramp-delay = <12500>;
726 regulator-state-mem {
727 regulator-on-in-suspend;
728 regulator-suspend-microvolt = <750000>;
729 };
730 };
731
732 vdd_vdenc_s0: dcdc-reg4 {
733 regulator-always-on;
734 regulator-boot-on;
735 regulator-max-microvolt = <950000>;
736 regulator-min-microvolt = <550000>;
737 regulator-name = "vdd_vdenc_s0";
738 regulator-ramp-delay = <12500>;
739 regulator-state-mem {
740 regulator-off-in-suspend;
741 };
742 };
743
744 vdd_ddr_s0: dcdc-reg5 {
745 regulator-always-on;
746 regulator-boot-on;
747 regulator-min-microvolt = <750000>;
748 regulator-max-microvolt = <850000>;
749 regulator-ramp-delay = <12500>;
750 regulator-name = "vdd_ddr_s0";
751 regulator-state-mem {
752 regulator-off-in-suspend;
753 regulator-suspend-microvolt = <850000>;
754 };
755 };
756
757 vdd2_ddr_s3: dcdc-reg6 {
758 regulator-always-on;
759 regulator-boot-on;
760 regulator-max-microvolt = <1100000>;
761 regulator-min-microvolt = <1100000>;
762 regulator-name = "vdd2_ddr_s3";
763 regulator-state-mem {
764 regulator-on-in-suspend;
765 };
766 };
767
768 vcc_2v0_pldo_s3: dcdc-reg7 {
769 regulator-always-on;
770 regulator-boot-on;
771 regulator-max-microvolt = <2000000>;
772 regulator-min-microvolt = <2000000>;
773 regulator-name = "vdd_2v0_pldo_s3";
774 regulator-state-mem {
775 regulator-on-in-suspend;
776 regulator-suspend-microvolt = <2000000>;
777 };
778 };
779
780 vcc_3v3_s3: dcdc-reg8 {
781 regulator-always-on;
782 regulator-boot-on;
783 regulator-max-microvolt = <3300000>;
784 regulator-min-microvolt = <3300000>;
785 regulator-name = "vcc_3v3_s3";
786 regulator-state-mem {
787 regulator-on-in-suspend;
788 regulator-suspend-microvolt = <3300000>;
789 };
790 };
791
792 vddq_ddr_s0: dcdc-reg9 {
793 regulator-always-on;
794 regulator-boot-on;
795 regulator-max-microvolt = <600000>;
796 regulator-min-microvolt = <600000>;
797 regulator-name = "vddq_ddr_s0";
798 regulator-state-mem {
799 regulator-off-in-suspend;
800 };
801 };
802
803 vcc_1v8_s3: dcdc-reg10 {
804 regulator-always-on;
805 regulator-boot-on;
806 regulator-max-microvolt = <1800000>;
807 regulator-min-microvolt = <1800000>;
808 regulator-name = "vcc_1v8_s3";
809 regulator-state-mem {
810 regulator-on-in-suspend;
811 regulator-suspend-microvolt = <1800000>;
812 };
813 };
814
815 vcc_1v8_s0: pldo-reg1 {
816 regulator-always-on;
817 regulator-boot-on;
818 regulator-max-microvolt = <1800000>;
819 regulator-min-microvolt = <1800000>;
820 regulator-name = "vcc_1v8_s0";
821 regulator-state-mem {
822 regulator-off-in-suspend;
823 };
824 };
825
826 vcca_1v8_s0: pldo-reg2 {
827 regulator-always-on;
828 regulator-boot-on;
829 regulator-max-microvolt = <1800000>;
830 regulator-min-microvolt = <1800000>;
831 regulator-name = "vcca_1v8_s0";
832 regulator-state-mem {
833 regulator-off-in-suspend;
834 regulator-suspend-microvolt = <1800000>;
835 };
836 };
837
838 vdda_1v2_s0: pldo-reg3 {
839 regulator-always-on;
840 regulator-boot-on;
841 regulator-max-microvolt = <1200000>;
842 regulator-min-microvolt = <1200000>;
843 regulator-name = "vdda_1v2_s0";
844 regulator-state-mem {
845 regulator-off-in-suspend;
846 };
847 };
848
849 vcca_3v3_s0: pldo-reg4 {
850 regulator-always-on;
851 regulator-boot-on;
852 regulator-max-microvolt = <3300000>;
853 regulator-min-microvolt = <3300000>;
854 regulator-name = "vcca_3v3_s0";
855 regulator-state-mem {
856 regulator-off-in-suspend;
857 };
858 };
859
860 vccio_sd_s0: pldo-reg5 {
861 regulator-always-on;
862 regulator-boot-on;
863 regulator-max-microvolt = <3300000>;
864 regulator-min-microvolt = <1800000>;
865 regulator-name = "vccio_sd_s0";
866 regulator-state-mem {
867 regulator-off-in-suspend;
868 };
869 };
870
871 vcc_1v8_s3_pldo6: pldo-reg6 {
872 regulator-always-on;
873 regulator-boot-on;
874 regulator-max-microvolt = <1800000>;
875 regulator-min-microvolt = <1800000>;
876 regulator-name = "vcc_1v8_s3_pldo6";
877 regulator-state-mem {
878 regulator-on-in-suspend;
879 regulator-suspend-microvolt = <1800000>;
880 };
881 };
882
883 vdd_0v75_s3: nldo-reg1 {
884 regulator-always-on;
885 regulator-boot-on;
886 regulator-max-microvolt = <750000>;
887 regulator-min-microvolt = <750000>;
888 regulator-name = "vdd_0v75_s3";
889 regulator-state-mem {
890 regulator-on-in-suspend;
891 regulator-suspend-microvolt = <750000>;
892 };
893 };
894
895 vdda_ddr_pll_s0: nldo-reg2 {
896 regulator-always-on;
897 regulator-boot-on;
898 regulator-max-microvolt = <850000>;
899 regulator-min-microvolt = <850000>;
900 regulator-name = "vdda_ddr_pll_s0";
901 regulator-state-mem {
902 regulator-off-in-suspend;
903 regulator-suspend-microvolt = <850000>;
904 };
905 };
906
907 avdd_0v75_s0: nldo-reg3 {
908 regulator-always-on;
909 regulator-boot-on;
910 regulator-max-microvolt = <750000>;
911 regulator-min-microvolt = <750000>;
912 regulator-name = "avdd_0v75_s0";
913 regulator-state-mem {
914 regulator-off-in-suspend;
915 };
916 };
917
918 vdda_0v85_s0: nldo-reg4 {
919 regulator-always-on;
920 regulator-boot-on;
921 regulator-min-microvolt = <850000>;
922 regulator-max-microvolt = <850000>;
923 regulator-name = "vdda_0v85_s0";
924 regulator-state-mem {
925 regulator-off-in-suspend;
926 };
927 };
928
929 /* Schematics show not in use */
930 nldo-reg5 {
931 };
932 };
933 };
934 };
935
936 &tsadc {
937 status = "okay";
938 };
939
940 &u2phy0 {
941 status = "okay";
942 };
943
944 &u2phy0_otg {
945 status = "okay";
946 };
947
948 &u2phy2 {
949 status = "okay";
950 };
951
952 &u2phy2_host {
953 phy-supply = <&vcc5v0_usb>;
954 status = "okay";
955 };
956
957 &u2phy3 {
958 status = "okay";
959 };
960
961 &u2phy3_host {
962 phy-supply = <&vcc5v0_usb>;
963 status = "okay";
964 };
965
966 &uart2 {
967 pinctrl-0 = <&uart2m0_xfer>;
968 status = "okay";
969 };
970
971 &uart9 {
972 pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>;
973 pinctrl-names = "default";
974 uart-has-rtscts;
975 status = "okay";
976
977 bluetooth {
978 compatible = "realtek,rtl8821cs-bt",
979 "realtek,rtl8723bs-bt";
980 device-wake-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
981 enable-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
982 host-wake-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
983 pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>;
984 pinctrl-names = "default";
985 };
986 };
987
988 &usb_host0_ehci {
989 status = "okay";
990 };
991
992 &usb_host0_ohci {
993 status = "okay";
994 };
995
996 &usb_host0_xhci {
997 usb-role-switch;
998 status = "okay";
999
1000 ports {
1001 #address-cells = <1>;
1002 #size-cells = <0>;
1003
1004 port@0 {
1005 reg = <0>;
1006 usb_host0_xhci_hs: endpoint {
1007 remote-endpoint = <&usbc0_hs>;
1008 };
1009 };
1010
1011 port@1 {
1012 reg = <1>;
1013 usb_host0_xhci_ss: endpoint {
1014 remote-endpoint = <&usbdp_phy0_ss_in>;
1015 };
1016 };
1017 };
1018 };
1019
1020 &usb_host1_ehci {
1021 status = "okay";
1022 };
1023
1024 &usb_host1_ohci {
1025 status = "okay";
1026 };
1027
1028 &usb_host2_xhci {
1029 status = "okay";
1030 };
1031
1032 &usbdp_phy0 {
1033 orientation-switch;
1034 mode-switch;
1035 sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
1036 sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
1037 rockchip,dp-lane-mux = <2 3>;
1038 status = "okay";
1039
1040 port {
1041 #address-cells = <1>;
1042 #size-cells = <0>;
1043
1044 usbdp_phy0_ss_out: endpoint@0 {
1045 reg = <0>;
1046 remote-endpoint = <&usbc0_ss>;
1047 };
1048
1049 usbdp_phy0_ss_in: endpoint@1 {
1050 reg = <1>;
1051 remote-endpoint = <&usb_host0_xhci_ss>;
1052 };
1053
1054 usbdp_phy0_dp_in: endpoint@2 {
1055 reg = <2>;
1056 remote-endpoint = <&dp0_out_con>;
1057 };
1058
1059 usbdp_phy0_dp_out: endpoint@3 {
1060 reg = <3>;
1061 remote-endpoint = <&usbc0_sbu>;
1062 };
1063 };
1064 };
1065
1066 &vop {
1067 status = "okay";
1068 };
1069
1070 &vop_mmu {
1071 status = "okay";
1072 };
1073
1074 &vp0 {
1075 vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
1076 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
1077 remote-endpoint = <&hdmi0_in_vp0>;
1078 };
1079 };
1080
1081 &vp1 {
1082 vp1_out_dp0: endpoint@a {
1083 reg = <ROCKCHIP_VOP2_EP_DP0>;
1084 remote-endpoint = <&dp0_in_vp1>;
1085 };
1086 };