Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3588-turing-rk1.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Device tree definitions for the Turing RK1 SoM.
4 *
5 * Copyright (c) 2023 Sam Edwards <[email protected]>
6 *
7 * Based on RK3588-EVB1 devicetree
8 * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
9 */
10
11 /dts-v1/;
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/pinctrl/rockchip.h>
14 #include "rk3588.dtsi"
15
16 / {
17 compatible = "turing,rk1", "rockchip,rk3588";
18
19 aliases {
20 ethernet0 = &gmac1;
21 mmc0 = &sdhci;
22 };
23
24 fan: pwm-fan {
25 compatible = "pwm-fan";
26 cooling-levels = <0 25 95 145 195 255>;
27 fan-supply = <&vcc5v0_sys>;
28 pinctrl-names = "default";
29 pinctrl-0 = <&pwm0m2_pins &fan_int>;
30 interrupt-parent = <&gpio0>;
31 interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
32 pwms = <&pwm0 0 50000 0>;
33 #cooling-cells = <2>;
34 };
35
36 vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
37 compatible = "regulator-fixed";
38 regulator-name = "vcc3v3_pcie30";
39 regulator-min-microvolt = <3300000>;
40 regulator-max-microvolt = <3300000>;
41 enable-active-high;
42 gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
43 pinctrl-names = "default";
44 pinctrl-0 = <&vcc3v3_pcie30_en>;
45 startup-delay-us = <5000>;
46 };
47
48 vcc5v0_sys: regulator-vcc5v0-sys {
49 compatible = "regulator-fixed";
50 regulator-name = "vcc5v0_sys";
51 regulator-always-on;
52 regulator-boot-on;
53 regulator-min-microvolt = <5000000>;
54 regulator-max-microvolt = <5000000>;
55 };
56
57 vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
58 compatible = "regulator-fixed";
59 regulator-name = "vcc_1v1_nldo_s3";
60 regulator-always-on;
61 regulator-boot-on;
62 regulator-min-microvolt = <1100000>;
63 regulator-max-microvolt = <1100000>;
64 vin-supply = <&vcc5v0_sys>;
65 };
66 };
67
68 &combphy2_psu {
69 status = "okay";
70 };
71
72 &cpu_b0 {
73 cpu-supply = <&vdd_cpu_big0_s0>;
74 };
75
76 &cpu_b1 {
77 cpu-supply = <&vdd_cpu_big0_s0>;
78 };
79
80 &cpu_b2 {
81 cpu-supply = <&vdd_cpu_big1_s0>;
82 };
83
84 &cpu_b3 {
85 cpu-supply = <&vdd_cpu_big1_s0>;
86 };
87
88 &cpu_l0 {
89 cpu-supply = <&vdd_cpu_lit_s0>;
90 };
91
92 &cpu_l1 {
93 cpu-supply = <&vdd_cpu_lit_s0>;
94 };
95
96 &cpu_l2 {
97 cpu-supply = <&vdd_cpu_lit_s0>;
98 };
99
100 &cpu_l3 {
101 cpu-supply = <&vdd_cpu_lit_s0>;
102 };
103
104 &gmac1 {
105 clock_in_out = "output";
106 phy-handle = <&rgmii_phy>;
107 phy-mode = "rgmii-rxid";
108 pinctrl-0 = <&gmac1_miim
109 &gmac1_tx_bus2
110 &gmac1_rx_bus2
111 &gmac1_rgmii_clk
112 &gmac1_rgmii_bus>;
113 pinctrl-names = "default";
114 rx_delay = <0x00>;
115 tx_delay = <0x43>;
116 status = "okay";
117 };
118
119 &gpu {
120 mali-supply = <&vdd_gpu_s0>;
121 status = "okay";
122 };
123
124 &i2c0 {
125 pinctrl-names = "default";
126 pinctrl-0 = <&i2c0m2_xfer>;
127 status = "okay";
128
129 vdd_cpu_big0_s0: regulator@42 {
130 compatible = "rockchip,rk8602";
131 reg = <0x42>;
132 fcs,suspend-voltage-selector = <1>;
133 regulator-name = "vdd_cpu_big0_s0";
134 regulator-always-on;
135 regulator-boot-on;
136 regulator-min-microvolt = <550000>;
137 regulator-max-microvolt = <1050000>;
138 regulator-ramp-delay = <2300>;
139 vin-supply = <&vcc5v0_sys>;
140
141 regulator-state-mem {
142 regulator-off-in-suspend;
143 };
144 };
145
146 vdd_cpu_big1_s0: regulator@43 {
147 compatible = "rockchip,rk8603", "rockchip,rk8602";
148 reg = <0x43>;
149 fcs,suspend-voltage-selector = <1>;
150 regulator-name = "vdd_cpu_big1_s0";
151 regulator-always-on;
152 regulator-boot-on;
153 regulator-min-microvolt = <550000>;
154 regulator-max-microvolt = <1050000>;
155 regulator-ramp-delay = <2300>;
156 vin-supply = <&vcc5v0_sys>;
157
158 regulator-state-mem {
159 regulator-off-in-suspend;
160 };
161 };
162 };
163
164 &i2c1 {
165 pinctrl-names = "default";
166 pinctrl-0 = <&i2c1m2_xfer>;
167 status = "okay";
168
169 vdd_npu_s0: regulator@42 {
170 compatible = "rockchip,rk8602";
171 reg = <0x42>;
172 fcs,suspend-voltage-selector = <1>;
173 regulator-name = "vdd_npu_s0";
174 regulator-boot-on;
175 regulator-min-microvolt = <550000>;
176 regulator-max-microvolt = <950000>;
177 regulator-ramp-delay = <2300>;
178 vin-supply = <&vcc5v0_sys>;
179
180 regulator-state-mem {
181 regulator-off-in-suspend;
182 };
183 };
184 };
185
186 &i2c6 {
187 status = "okay";
188
189 hym8563: rtc@51 {
190 compatible = "haoyu,hym8563";
191 reg = <0x51>;
192 #clock-cells = <0>;
193 clock-output-names = "hym8563";
194 pinctrl-names = "default";
195 pinctrl-0 = <&hym8563_int>;
196 interrupt-parent = <&gpio0>;
197 interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
198 wakeup-source;
199 };
200 };
201
202 &mdio1 {
203 rgmii_phy: ethernet-phy@1 {
204 /* RTL8211F */
205 compatible = "ethernet-phy-id001c.c916";
206 reg = <0x1>;
207 pinctrl-names = "default";
208 pinctrl-0 = <&rtl8211f_rst>;
209 reset-assert-us = <15000>;
210 reset-deassert-us = <50000>;
211 reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
212 };
213 };
214
215 &package_thermal {
216 polling-delay = <1000>;
217
218 trips {
219 package_active1: trip-active1 {
220 temperature = <45000>;
221 hysteresis = <5000>;
222 type = "active";
223 };
224 package_active2: trip-active2 {
225 temperature = <50000>;
226 hysteresis = <5000>;
227 type = "active";
228 };
229 package_active3: trip-active3 {
230 temperature = <60000>;
231 hysteresis = <5000>;
232 type = "active";
233 };
234 package_active4: trip-active4 {
235 temperature = <70000>;
236 hysteresis = <5000>;
237 type = "active";
238 };
239 package_active5: trip-active5 {
240 temperature = <80000>;
241 hysteresis = <5000>;
242 type = "active";
243 };
244 };
245
246 cooling-maps {
247 map1 {
248 trip = <&package_active1>;
249 cooling-device = <&fan 1 1>;
250 };
251 map2 {
252 trip = <&package_active2>;
253 cooling-device = <&fan 2 2>;
254 };
255 map3 {
256 trip = <&package_active3>;
257 cooling-device = <&fan 3 3>;
258 };
259 map4 {
260 trip = <&package_active4>;
261 cooling-device = <&fan 4 4>;
262 };
263 map5 {
264 trip = <&package_active5>;
265 cooling-device = <&fan 5 5>;
266 };
267 };
268 };
269
270 &pcie2x1l1 {
271 linux,pci-domain = <1>;
272 pinctrl-names = "default";
273 pinctrl-0 = <&pcie2_reset>, <&pcie30x1m1_0_clkreqn>, <&pcie30x1m1_0_waken>;
274 reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
275 status = "okay";
276 };
277
278 &pcie30phy {
279 status = "okay";
280 };
281
282 &pcie3x4 {
283 linux,pci-domain = <0>;
284 pinctrl-names = "default";
285 pinctrl-0 = <&pcie3_reset>, <&pcie30x4m1_clkreqn>, <&pcie30x4m1_waken>;
286 reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
287 vpcie3v3-supply = <&vcc3v3_pcie30>;
288 status = "okay";
289 };
290
291 &pd_gpu {
292 domain-supply = <&vdd_gpu_s0>;
293 };
294
295 &pd_npu {
296 domain-supply = <&vdd_npu_s0>;
297 };
298
299 &pinctrl {
300 fan {
301 fan_int: fan-int {
302 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
303 };
304 };
305
306 hym8563 {
307 hym8563_int: hym8563-int {
308 rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
309 };
310 };
311
312 pcie2 {
313 pcie2_reset: pcie2-reset {
314 rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
315 };
316 };
317
318 pcie3 {
319 pcie3_reset: pcie3-reset {
320 rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
321 };
322
323 vcc3v3_pcie30_en: pcie3-reg {
324 rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
325 };
326 };
327
328 rtl8211f {
329 rtl8211f_rst: rtl8211f-rst {
330 rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
331 };
332 };
333 };
334
335 &pwm0 {
336 status = "okay";
337 };
338
339 &rknn_core_0 {
340 npu-supply = <&vdd_npu_s0>;
341 sram-supply = <&vdd_npu_s0>;
342 status = "okay";
343 };
344
345 &rknn_core_1 {
346 npu-supply = <&vdd_npu_s0>;
347 sram-supply = <&vdd_npu_s0>;
348 status = "okay";
349 };
350
351 &rknn_core_2 {
352 npu-supply = <&vdd_npu_s0>;
353 sram-supply = <&vdd_npu_s0>;
354 status = "okay";
355 };
356
357 &rknn_mmu_0 {
358 status = "okay";
359 };
360
361 &rknn_mmu_1 {
362 status = "okay";
363 };
364
365 &rknn_mmu_2 {
366 status = "okay";
367 };
368
369 &sdhci {
370 bus-width = <8>;
371 no-sdio;
372 no-sd;
373 non-removable;
374 mmc-hs400-1_8v;
375 mmc-hs400-enhanced-strobe;
376 status = "okay";
377 };
378
379 &spi2 {
380 status = "okay";
381 pinctrl-names = "default";
382 pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
383 num-cs = <1>;
384
385 pmic@0 {
386 compatible = "rockchip,rk806";
387 spi-max-frequency = <1000000>;
388 reg = <0x0>;
389
390 interrupt-parent = <&gpio0>;
391 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
392
393 pinctrl-names = "default";
394 pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
395 <&rk806_dvs2_null>, <&rk806_dvs3_null>;
396 system-power-controller;
397
398 vcc1-supply = <&vcc5v0_sys>;
399 vcc2-supply = <&vcc5v0_sys>;
400 vcc3-supply = <&vcc5v0_sys>;
401 vcc4-supply = <&vcc5v0_sys>;
402 vcc5-supply = <&vcc5v0_sys>;
403 vcc6-supply = <&vcc5v0_sys>;
404 vcc7-supply = <&vcc5v0_sys>;
405 vcc8-supply = <&vcc5v0_sys>;
406 vcc9-supply = <&vcc5v0_sys>;
407 vcc10-supply = <&vcc5v0_sys>;
408 vcc11-supply = <&vcc_2v0_pldo_s3>;
409 vcc12-supply = <&vcc5v0_sys>;
410 vcc13-supply = <&vcc_1v1_nldo_s3>;
411 vcc14-supply = <&vcc_1v1_nldo_s3>;
412 vcca-supply = <&vcc5v0_sys>;
413
414 gpio-controller;
415 #gpio-cells = <2>;
416
417 rk806_dvs1_null: dvs1-null-pins {
418 pins = "gpio_pwrctrl1";
419 function = "pin_fun0";
420 };
421
422 rk806_dvs2_null: dvs2-null-pins {
423 pins = "gpio_pwrctrl2";
424 function = "pin_fun0";
425 };
426
427 rk806_dvs3_null: dvs3-null-pins {
428 pins = "gpio_pwrctrl3";
429 function = "pin_fun0";
430 };
431
432 regulators {
433 vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
434 regulator-boot-on;
435 regulator-min-microvolt = <550000>;
436 regulator-max-microvolt = <950000>;
437 regulator-ramp-delay = <12500>;
438 regulator-name = "vdd_gpu_s0";
439 regulator-enable-ramp-delay = <400>;
440
441 regulator-state-mem {
442 regulator-off-in-suspend;
443 };
444 };
445
446 vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
447 regulator-always-on;
448 regulator-boot-on;
449 regulator-min-microvolt = <550000>;
450 regulator-max-microvolt = <950000>;
451 regulator-ramp-delay = <12500>;
452 regulator-name = "vdd_cpu_lit_s0";
453
454 regulator-state-mem {
455 regulator-off-in-suspend;
456 };
457 };
458
459 vdd_log_s0: dcdc-reg3 {
460 regulator-always-on;
461 regulator-boot-on;
462 regulator-min-microvolt = <675000>;
463 regulator-max-microvolt = <750000>;
464 regulator-ramp-delay = <12500>;
465 regulator-name = "vdd_log_s0";
466
467 regulator-state-mem {
468 regulator-off-in-suspend;
469 regulator-suspend-microvolt = <750000>;
470 };
471 };
472
473 vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
474 regulator-always-on;
475 regulator-boot-on;
476 regulator-min-microvolt = <550000>;
477 regulator-max-microvolt = <950000>;
478 regulator-ramp-delay = <12500>;
479 regulator-name = "vdd_vdenc_s0";
480
481 regulator-state-mem {
482 regulator-off-in-suspend;
483 };
484 };
485
486 vdd_ddr_s0: dcdc-reg5 {
487 regulator-always-on;
488 regulator-boot-on;
489 regulator-min-microvolt = <675000>;
490 regulator-max-microvolt = <900000>;
491 regulator-ramp-delay = <12500>;
492 regulator-name = "vdd_ddr_s0";
493
494 regulator-state-mem {
495 regulator-off-in-suspend;
496 regulator-suspend-microvolt = <850000>;
497 };
498 };
499
500 vdd2_ddr_s3: dcdc-reg6 {
501 regulator-always-on;
502 regulator-boot-on;
503 regulator-name = "vdd2_ddr_s3";
504
505 regulator-state-mem {
506 regulator-on-in-suspend;
507 };
508 };
509
510 vcc_2v0_pldo_s3: dcdc-reg7 {
511 regulator-always-on;
512 regulator-boot-on;
513 regulator-min-microvolt = <2000000>;
514 regulator-max-microvolt = <2000000>;
515 regulator-ramp-delay = <12500>;
516 regulator-name = "vdd_2v0_pldo_s3";
517
518 regulator-state-mem {
519 regulator-on-in-suspend;
520 regulator-suspend-microvolt = <2000000>;
521 };
522 };
523
524 vcc_3v3_s3: dcdc-reg8 {
525 regulator-always-on;
526 regulator-boot-on;
527 regulator-min-microvolt = <3300000>;
528 regulator-max-microvolt = <3300000>;
529 regulator-name = "vcc_3v3_s3";
530
531 regulator-state-mem {
532 regulator-on-in-suspend;
533 regulator-suspend-microvolt = <3300000>;
534 };
535 };
536
537 vddq_ddr_s0: dcdc-reg9 {
538 regulator-always-on;
539 regulator-boot-on;
540 regulator-name = "vddq_ddr_s0";
541
542 regulator-state-mem {
543 regulator-off-in-suspend;
544 };
545 };
546
547 vcc_1v8_s3: dcdc-reg10 {
548 regulator-always-on;
549 regulator-boot-on;
550 regulator-min-microvolt = <1800000>;
551 regulator-max-microvolt = <1800000>;
552 regulator-name = "vcc_1v8_s3";
553
554 regulator-state-mem {
555 regulator-on-in-suspend;
556 regulator-suspend-microvolt = <1800000>;
557 };
558 };
559
560 avcc_1v8_s0: pldo-reg1 {
561 regulator-always-on;
562 regulator-boot-on;
563 regulator-min-microvolt = <1800000>;
564 regulator-max-microvolt = <1800000>;
565 regulator-name = "avcc_1v8_s0";
566
567 regulator-state-mem {
568 regulator-off-in-suspend;
569 };
570 };
571
572 vcc_1v8_s0: pldo-reg2 {
573 regulator-always-on;
574 regulator-boot-on;
575 regulator-min-microvolt = <1800000>;
576 regulator-max-microvolt = <1800000>;
577 regulator-name = "vcc_1v8_s0";
578
579 regulator-state-mem {
580 regulator-off-in-suspend;
581 regulator-suspend-microvolt = <1800000>;
582 };
583 };
584
585 avdd_1v2_s0: pldo-reg3 {
586 regulator-always-on;
587 regulator-boot-on;
588 regulator-min-microvolt = <1200000>;
589 regulator-max-microvolt = <1200000>;
590 regulator-name = "avdd_1v2_s0";
591
592 regulator-state-mem {
593 regulator-off-in-suspend;
594 };
595 };
596
597 vcc_3v3_s0: pldo-reg4 {
598 regulator-always-on;
599 regulator-boot-on;
600 regulator-min-microvolt = <3300000>;
601 regulator-max-microvolt = <3300000>;
602 regulator-ramp-delay = <12500>;
603 regulator-name = "vcc_3v3_s0";
604
605 regulator-state-mem {
606 regulator-off-in-suspend;
607 };
608 };
609
610 vccio_sd_s0: pldo-reg5 {
611 regulator-always-on;
612 regulator-boot-on;
613 regulator-min-microvolt = <1800000>;
614 regulator-max-microvolt = <3300000>;
615 regulator-ramp-delay = <12500>;
616 regulator-name = "vccio_sd_s0";
617
618 regulator-state-mem {
619 regulator-off-in-suspend;
620 };
621 };
622
623 pldo6_s3: pldo-reg6 {
624 regulator-always-on;
625 regulator-boot-on;
626 regulator-min-microvolt = <1800000>;
627 regulator-max-microvolt = <1800000>;
628 regulator-name = "pldo6_s3";
629
630 regulator-state-mem {
631 regulator-on-in-suspend;
632 regulator-suspend-microvolt = <1800000>;
633 };
634 };
635
636 vdd_0v75_s3: nldo-reg1 {
637 regulator-always-on;
638 regulator-boot-on;
639 regulator-min-microvolt = <750000>;
640 regulator-max-microvolt = <750000>;
641 regulator-name = "vdd_0v75_s3";
642
643 regulator-state-mem {
644 regulator-on-in-suspend;
645 regulator-suspend-microvolt = <750000>;
646 };
647 };
648
649 vdd_ddr_pll_s0: nldo-reg2 {
650 regulator-always-on;
651 regulator-boot-on;
652 regulator-min-microvolt = <850000>;
653 regulator-max-microvolt = <850000>;
654 regulator-name = "vdd_ddr_pll_s0";
655
656 regulator-state-mem {
657 regulator-off-in-suspend;
658 regulator-suspend-microvolt = <850000>;
659 };
660 };
661
662 avdd_0v75_s0: nldo-reg3 {
663 regulator-always-on;
664 regulator-boot-on;
665 regulator-min-microvolt = <750000>;
666 regulator-max-microvolt = <750000>;
667 regulator-name = "avdd_0v75_s0";
668
669 regulator-state-mem {
670 regulator-off-in-suspend;
671 };
672 };
673
674 vdd_0v85_s0: nldo-reg4 {
675 regulator-always-on;
676 regulator-boot-on;
677 regulator-min-microvolt = <850000>;
678 regulator-max-microvolt = <850000>;
679 regulator-name = "vdd_0v85_s0";
680
681 regulator-state-mem {
682 regulator-off-in-suspend;
683 };
684 };
685
686 vdd_0v75_s0: nldo-reg5 {
687 regulator-always-on;
688 regulator-boot-on;
689 regulator-min-microvolt = <750000>;
690 regulator-max-microvolt = <750000>;
691 regulator-name = "vdd_0v75_s0";
692
693 regulator-state-mem {
694 regulator-off-in-suspend;
695 };
696 };
697 };
698 };
699 };
700
701 &tsadc {
702 status = "okay";
703 };
704
705 &uart2 {
706 pinctrl-0 = <&uart2m0_xfer>;
707 status = "okay";
708 };
709
710 &uart9 {
711 pinctrl-0 = <&uart9m0_xfer>;
712 status = "okay";
713 };
714
715 /* USB 0: USB 2.0 only, OTG-capable */
716 &u2phy0 {
717 status = "okay";
718 };
719
720 &u2phy0_otg {
721 status = "okay";
722 };
723
724 &usbdp_phy0 {
725 /*
726 * TODO: On the RK1, USBDP0 drives the DisplayPort pins and is not
727 * involved in this USB2-only bus. The bus controller (below) needs to
728 * know that it doesn't have a USB3 port so it can ignore any
729 * USB3-related signals. This is handled in hardware by updating the
730 * GRFs corresponding to that bus controller. Alas, Linux currently
731 * puts the code to do that in the USBDP driver, so USBDP0 must be
732 * enabled for now.
733 */
734 rockchip,dp-lane-mux = <0 1 2 3>; /* "No USB lanes" */
735 status = "okay";
736 };
737
738 &usb_host0_xhci {
739 extcon = <&u2phy0>;
740 maximum-speed = "high-speed";
741 status = "okay";
742 };
743
744 /* USB 1: USB 3.0, host only */
745 &u2phy1 {
746 status = "okay";
747 };
748
749 &u2phy1_otg {
750 status = "okay";
751 };
752
753 &usbdp_phy1 {
754 status = "okay";
755 };
756
757 &usb_host1_xhci {
758 dr_mode = "host";
759 extcon = <&u2phy1>;
760 status = "okay";
761 };
762
763 /* USB 2: USB 2.0, host only */
764 &u2phy2 {
765 status = "okay";
766 };
767
768 &u2phy2_host {
769 status = "okay";
770 };
771
772 &usb_host0_ehci {
773 status = "okay";
774 };
775
776 &usb_host0_ohci {
777 status = "okay";
778 };