Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3588-tiger.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
4 */
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/leds/common.h>
8 #include <dt-bindings/pinctrl/rockchip.h>
9 #include "rk8xx.h"
10 #include "rk3588.dtsi"
11
12 / {
13 compatible = "tsd,rk3588-tiger", "rockchip,rk3588";
14
15 aliases {
16 i2c10 = &i2c10;
17 mmc0 = &sdhci;
18 rtc0 = &rtc_twi;
19 };
20
21 emmc_pwrseq: emmc-pwrseq {
22 compatible = "mmc-pwrseq-emmc";
23 pinctrl-0 = <&emmc_reset>;
24 pinctrl-names = "default";
25 reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
26 };
27
28 extcon_usb3: extcon-usb3 {
29 compatible = "linux,extcon-usb-gpio";
30 id-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
31 pinctrl-names = "default";
32 pinctrl-0 = <&usb3_id>;
33 status = "disabled";
34 };
35
36 leds {
37 compatible = "gpio-leds";
38 pinctrl-names = "default";
39 pinctrl-0 = <&module_led_pin>;
40
41 /* Named LED1 on the board */
42 led-1 {
43 gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
44 function = LED_FUNCTION_HEARTBEAT;
45 linux,default-trigger = "heartbeat";
46 color = <LED_COLOR_ID_AMBER>;
47 };
48 };
49
50 /*
51 * 100MHz reference clock for PCIe peripherals from PI6C557-05BLE
52 * clock generator.
53 * The clock output is gated via the OE pin on the clock generator.
54 * This is modeled as a fixed-clock plus a gpio-gate-clock.
55 */
56 pcie_refclk_gen: pcie-refclk-gen-clock {
57 compatible = "fixed-clock";
58 #clock-cells = <0>;
59 clock-frequency = <100000000>;
60 };
61
62 pcie_refclk: pcie-refclk-clock {
63 compatible = "gpio-gate-clock";
64 clocks = <&pcie_refclk_gen>;
65 #clock-cells = <0>;
66 enable-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; /* PCIE30X4_CLKREQN_M1_L */
67 };
68
69 vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
70 compatible = "regulator-fixed";
71 regulator-name = "vcc_1v1_nldo_s3";
72 regulator-always-on;
73 regulator-boot-on;
74 regulator-min-microvolt = <1100000>;
75 regulator-max-microvolt = <1100000>;
76 vin-supply = <&vcc5v0_sys>;
77 };
78
79 vcc_1v2_s3: regulator-vcc-1v2-s3 {
80 compatible = "regulator-fixed";
81 regulator-name = "vcc_1v2_s3";
82 regulator-always-on;
83 regulator-boot-on;
84 regulator-min-microvolt = <1200000>;
85 regulator-max-microvolt = <1200000>;
86 vin-supply = <&vcc5v0_sys>;
87 };
88
89 vcc5v0_sys: regulator-vcc5v0-sys {
90 compatible = "regulator-fixed";
91 regulator-name = "vcc5v0_sys";
92 regulator-always-on;
93 regulator-boot-on;
94 regulator-min-microvolt = <5000000>;
95 regulator-max-microvolt = <5000000>;
96 vin-supply = <&vcc5v0_baseboard>;
97 };
98 };
99
100 &cpu_b0 {
101 cpu-supply = <&vdd_cpu_big0_s0>;
102 };
103
104 &cpu_b1 {
105 cpu-supply = <&vdd_cpu_big0_s0>;
106 };
107
108 &cpu_b2 {
109 cpu-supply = <&vdd_cpu_big1_s0>;
110 };
111
112 &cpu_b3 {
113 cpu-supply = <&vdd_cpu_big1_s0>;
114 };
115
116 &cpu_l0 {
117 cpu-supply = <&vdd_cpu_lit_s0>;
118 };
119
120 &cpu_l1 {
121 cpu-supply = <&vdd_cpu_lit_s0>;
122 };
123
124 &cpu_l2 {
125 cpu-supply = <&vdd_cpu_lit_s0>;
126 };
127
128 &cpu_l3 {
129 cpu-supply = <&vdd_cpu_lit_s0>;
130 };
131
132 &gmac0 {
133 clock_in_out = "output";
134 phy-handle = <&rgmii_phy>;
135 phy-mode = "rgmii";
136 phy-supply = <&vcc_1v2_s3>;
137 pinctrl-names = "default";
138 pinctrl-0 = <&gmac0_miim
139 &gmac0_rx_bus2
140 &gmac0_tx_bus2
141 &gmac0_rgmii_clk
142 &gmac0_rgmii_bus
143 &eth0_pins
144 &eth_reset>;
145 tx_delay = <0x10>;
146 rx_delay = <0x10>;
147 snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
148 snps,reset-active-low;
149 snps,reset-delays-us = <0 10000 100000>;
150 };
151
152 &gpu {
153 mali-supply = <&vdd_gpu_s0>;
154 status = "okay";
155 };
156
157 &hdmi0 {
158 pinctrl-names = "default";
159 pinctrl-0 = <&hdmim1_tx0_cec &hdmim0_tx0_hpd &hdmim1_tx0_scl
160 &hdmim1_tx0_sda>;
161 };
162
163 &i2c1 {
164 pinctrl-0 = <&i2c1m0_xfer>;
165 };
166
167 &i2c1m0_xfer {
168 rockchip,pins =
169 /* i2c1_scl_m0 */
170 <0 RK_PB5 9 &pcfg_pull_none_drv_level_0>,
171 /* i2c1_sda_m0 */
172 <0 RK_PB6 9 &pcfg_pull_none_drv_level_0>;
173 };
174
175 &i2c2 {
176 pinctrl-0 = <&i2c2m3_xfer>;
177 };
178
179 &i2c2m3_xfer {
180 rockchip,pins =
181 /* i2c2_scl_m3 */
182 <1 RK_PC5 9 &pcfg_pull_none_drv_level_0>,
183 /* i2c2_sda_m3 */
184 <1 RK_PC4 9 &pcfg_pull_none_drv_level_0>;
185 };
186
187 &i2c3 {
188 pinctrl-0 = <&i2c3m0_xfer>;
189 };
190
191 &i2c4 {
192 pinctrl-0 = <&i2c4m4_xfer>;
193 status = "okay";
194
195 vdd_npu_s0: regulator@42 {
196 compatible = "rockchip,rk8602";
197 reg = <0x42>;
198 fcs,suspend-voltage-selector = <1>;
199 regulator-name = "vdd_npu_s0";
200 regulator-boot-on;
201 regulator-min-microvolt = <550000>;
202 regulator-max-microvolt = <950000>;
203 regulator-ramp-delay = <2300>;
204 vin-supply = <&vcc5v0_sys>;
205
206 regulator-state-mem {
207 regulator-off-in-suspend;
208 };
209 };
210 };
211
212 &i2c5 {
213 pinctrl-0 = <&i2c5m1_xfer>;
214 };
215
216 &i2c5m1_xfer {
217 rockchip,pins =
218 /* i2c5_scl_m1 */
219 <4 RK_PB6 9 &pcfg_pull_none_drv_level_0>,
220 /* i2c5_sda_m1 */
221 <4 RK_PB7 9 &pcfg_pull_none_drv_level_0>;
222 };
223
224 &i2c6 {
225 /*
226 * Mule-ATtiny can handle up to Fast mode Plus (1MHz) on I2C bus,
227 * but SOC can handle only up to (400kHz).
228 */
229 clock-frequency = <400000>;
230 status = "okay";
231
232 fan@18 {
233 compatible = "tsd,mule", "ti,amc6821";
234 reg = <0x18>;
235
236 i2c-mux {
237 compatible = "tsd,mule-i2c-mux";
238 #address-cells = <1>;
239 #size-cells = <0>;
240
241 i2c10: i2c@0 {
242 reg = <0x0>;
243 #address-cells = <1>;
244 #size-cells = <0>;
245
246 rtc_twi: rtc@6f {
247 compatible = "isil,isl1208";
248 reg = <0x6f>;
249 };
250 };
251 };
252 };
253 };
254
255 &i2c6m0_xfer {
256 rockchip,pins =
257 /* i2c6_scl_m0 */
258 <0 RK_PD0 9 &pcfg_pull_none_drv_level_0>,
259 /* i2c6_sda_m0 */
260 <0 RK_PC7 9 &pcfg_pull_none_drv_level_0>;
261 };
262
263 &i2c7 {
264 status = "okay";
265
266 vdd_cpu_big0_s0: regulator@42 {
267 compatible = "rockchip,rk8602";
268 reg = <0x42>;
269 fcs,suspend-voltage-selector = <1>;
270 regulator-name = "vdd_cpu_big0_s0";
271 regulator-always-on;
272 regulator-boot-on;
273 regulator-min-microvolt = <550000>;
274 regulator-max-microvolt = <1050000>;
275 regulator-ramp-delay = <2300>;
276 vin-supply = <&vcc5v0_sys>;
277
278 regulator-state-mem {
279 regulator-off-in-suspend;
280 };
281 };
282
283 vdd_cpu_big1_s0: regulator@43 {
284 compatible = "rockchip,rk8603", "rockchip,rk8602";
285 reg = <0x43>;
286 fcs,suspend-voltage-selector = <1>;
287 regulator-name = "vdd_cpu_big1_s0";
288 regulator-always-on;
289 regulator-boot-on;
290 regulator-min-microvolt = <550000>;
291 regulator-max-microvolt = <1050000>;
292 regulator-ramp-delay = <2300>;
293 vin-supply = <&vcc5v0_sys>;
294
295 regulator-state-mem {
296 regulator-off-in-suspend;
297 };
298 };
299 };
300
301 &i2c7m0_xfer {
302 rockchip,pins =
303 /* i2c7_scl_m0 */
304 <1 RK_PD0 9 &pcfg_pull_none_drv_level_0>,
305 /* i2c7_sda_m0 */
306 <1 RK_PD1 9 &pcfg_pull_none_drv_level_0>;
307 };
308
309 &i2c8 {
310 pinctrl-0 = <&i2c8m2_xfer>;
311 };
312
313 &mdio0 {
314 rgmii_phy: ethernet-phy@6 {
315 /* KSZ9031 or KSZ9131 */
316 compatible = "ethernet-phy-ieee802.3-c22";
317 reg = <0x6>;
318 clocks = <&cru REFCLKO25M_ETH0_OUT>;
319 };
320 };
321
322 &pcie3x4 {
323 /*
324 * The board has a gpio-controlled "pcie_refclk" generator,
325 * so add it to the list of clocks.
326 */
327 clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
328 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
329 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
330 <&pcie_refclk>;
331 clock-names = "aclk_mst", "aclk_slv",
332 "aclk_dbi", "pclk",
333 "aux", "pipe",
334 "ref";
335 reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
336 };
337
338 &pd_gpu {
339 domain-supply = <&vdd_gpu_s0>;
340 };
341
342 &pd_npu {
343 domain-supply = <&vdd_npu_s0>;
344 };
345
346 &pinctrl {
347 emmc {
348 emmc_reset: emmc-reset {
349 rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
350 };
351 };
352
353 ethernet {
354 eth_reset: eth-reset {
355 rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
356 };
357 };
358
359 leds {
360 module_led_pin: module-led-pin {
361 rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
362 };
363 };
364
365 usb3 {
366 usb3_id: usb3-id {
367 rockchip,pins =
368 <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
369 };
370 };
371 };
372
373 &pwm0 {
374 pinctrl-0 = <&pwm0m1_pins>;
375 pinctrl-names = "default";
376 };
377
378 &rknn_core_0 {
379 npu-supply = <&vdd_npu_s0>;
380 sram-supply = <&vdd_npu_s0>;
381 status = "okay";
382 };
383
384 &rknn_core_1 {
385 npu-supply = <&vdd_npu_s0>;
386 sram-supply = <&vdd_npu_s0>;
387 status = "okay";
388 };
389
390 &rknn_core_2 {
391 npu-supply = <&vdd_npu_s0>;
392 sram-supply = <&vdd_npu_s0>;
393 status = "okay";
394 };
395
396 &rknn_mmu_0 {
397 status = "okay";
398 };
399
400 &rknn_mmu_1 {
401 status = "okay";
402 };
403
404 &rknn_mmu_2 {
405 status = "okay";
406 };
407
408 &saradc {
409 vref-supply = <&vcc_1v8_s0>;
410 status = "okay";
411 };
412
413 &sdhci {
414 bus-width = <8>;
415 cap-mmc-highspeed;
416 mmc-ddr-1_8v;
417 mmc-hs200-1_8v;
418 mmc-pwrseq = <&emmc_pwrseq>;
419 no-sdio;
420 no-sd;
421 non-removable;
422 pinctrl-names = "default";
423 pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk>;
424 vmmc-supply = <&vcc_3v3_s3>;
425 vqmmc-supply = <&vcc_1v8_s3>;
426 status = "okay";
427 };
428
429 &sdmmc {
430 bus-width = <4>;
431 cap-sd-highspeed;
432 max-frequency = <150000000>;
433 vqmmc-supply = <&vccio_sd_s0>;
434 };
435
436 &spi0 {
437 pinctrl-0 = <&spi0m1_cs0 &spi0m1_cs1 &spi0m3_pins>;
438 };
439
440 &spi2 {
441 assigned-clocks = <&cru CLK_SPI2>;
442 assigned-clock-rates = <200000000>;
443 num-cs = <1>;
444 pinctrl-names = "default";
445 pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
446 status = "okay";
447
448 pmic@0 {
449 compatible = "rockchip,rk806";
450 reg = <0x0>;
451 interrupt-parent = <&gpio0>;
452 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
453 gpio-controller;
454 #gpio-cells = <2>;
455 pinctrl-names = "default";
456 pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
457 <&rk806_dvs2_null>, <&rk806_dvs3_null>;
458 spi-max-frequency = <1000000>;
459 system-power-controller;
460 vcc1-supply = <&vcc5v0_sys>;
461 vcc2-supply = <&vcc5v0_sys>;
462 vcc3-supply = <&vcc5v0_sys>;
463 vcc4-supply = <&vcc5v0_sys>;
464 vcc5-supply = <&vcc5v0_sys>;
465 vcc6-supply = <&vcc5v0_sys>;
466 vcc7-supply = <&vcc5v0_sys>;
467 vcc8-supply = <&vcc5v0_sys>;
468 vcc9-supply = <&vcc5v0_sys>;
469 vcc10-supply = <&vcc5v0_sys>;
470 vcc11-supply = <&vcc_2v0_pldo_s3>;
471 vcc12-supply = <&vcc5v0_sys>;
472 vcc13-supply = <&vcc_1v1_nldo_s3>;
473 vcc14-supply = <&vcc_1v1_nldo_s3>;
474 vcca-supply = <&vcc5v0_sys>;
475 rockchip,reset-mode = <RK806_RESTART>;
476
477 rk806_dvs1_null: dvs1-null-pins {
478 pins = "gpio_pwrctrl1";
479 function = "pin_fun0";
480 };
481
482 rk806_dvs2_null: dvs2-null-pins {
483 pins = "gpio_pwrctrl2";
484 function = "pin_fun0";
485 };
486
487 rk806_dvs3_null: dvs3-null-pins {
488 pins = "gpio_pwrctrl3";
489 function = "pin_fun0";
490 };
491
492 regulators {
493 vdd_gpu_s0: dcdc-reg1 {
494 regulator-boot-on;
495 regulator-min-microvolt = <550000>;
496 regulator-max-microvolt = <950000>;
497 regulator-ramp-delay = <12500>;
498 regulator-name = "vdd_gpu_s0";
499 regulator-enable-ramp-delay = <400>;
500
501 regulator-state-mem {
502 regulator-off-in-suspend;
503 };
504 };
505
506 vdd_cpu_lit_s0: dcdc-reg2 {
507 regulator-name = "vdd_cpu_lit_s0";
508 regulator-always-on;
509 regulator-boot-on;
510 regulator-min-microvolt = <550000>;
511 regulator-max-microvolt = <950000>;
512 regulator-ramp-delay = <12500>;
513
514 regulator-state-mem {
515 regulator-off-in-suspend;
516 };
517 };
518
519 vdd_log_s0: dcdc-reg3 {
520 regulator-name = "vdd_log_s0";
521 regulator-always-on;
522 regulator-boot-on;
523 regulator-min-microvolt = <675000>;
524 regulator-max-microvolt = <750000>;
525 regulator-ramp-delay = <12500>;
526
527 regulator-state-mem {
528 regulator-off-in-suspend;
529 regulator-suspend-microvolt = <750000>;
530 };
531 };
532
533 vdd_vdenc_s0: dcdc-reg4 {
534 regulator-name = "vdd_vdenc_s0";
535 regulator-always-on;
536 regulator-boot-on;
537 regulator-min-microvolt = <550000>;
538 regulator-max-microvolt = <950000>;
539 regulator-ramp-delay = <12500>;
540
541 regulator-state-mem {
542 regulator-off-in-suspend;
543 };
544 };
545
546 vdd_ddr_s0: dcdc-reg5 {
547 regulator-name = "vdd_ddr_s0";
548 regulator-always-on;
549 regulator-boot-on;
550 regulator-min-microvolt = <675000>;
551 regulator-max-microvolt = <900000>;
552 regulator-ramp-delay = <12500>;
553
554 regulator-state-mem {
555 regulator-off-in-suspend;
556 regulator-suspend-microvolt = <850000>;
557 };
558 };
559
560 vdd2_ddr_s3: dcdc-reg6 {
561 regulator-name = "vdd2_ddr_s3";
562 regulator-always-on;
563 regulator-boot-on;
564
565 regulator-state-mem {
566 regulator-on-in-suspend;
567 };
568 };
569
570 vcc_2v0_pldo_s3: dcdc-reg7 {
571 regulator-name = "vcc_2v0_pldo_s3";
572 regulator-always-on;
573 regulator-boot-on;
574 regulator-min-microvolt = <2000000>;
575 regulator-max-microvolt = <2000000>;
576 regulator-ramp-delay = <12500>;
577
578 regulator-state-mem {
579 regulator-on-in-suspend;
580 regulator-suspend-microvolt = <2000000>;
581 };
582 };
583
584 vcc_3v3_s3: dcdc-reg8 {
585 regulator-name = "vcc_3v3_s3";
586 regulator-always-on;
587 regulator-boot-on;
588 regulator-min-microvolt = <3300000>;
589 regulator-max-microvolt = <3300000>;
590
591 regulator-state-mem {
592 regulator-on-in-suspend;
593 regulator-suspend-microvolt = <3300000>;
594 };
595 };
596
597 vddq_ddr_s0: dcdc-reg9 {
598 regulator-name = "vddq_ddr_s0";
599 regulator-always-on;
600 regulator-boot-on;
601
602 regulator-state-mem {
603 regulator-off-in-suspend;
604 };
605 };
606
607 vcc_1v8_s3: dcdc-reg10 {
608 regulator-name = "vcc_1v8_s3";
609 regulator-always-on;
610 regulator-boot-on;
611 regulator-min-microvolt = <1800000>;
612 regulator-max-microvolt = <1800000>;
613
614 regulator-state-mem {
615 regulator-on-in-suspend;
616 regulator-suspend-microvolt = <1800000>;
617 };
618 };
619
620 vcca_1v8_s0: pldo-reg1 {
621 regulator-name = "vcca_1v8_s0";
622 regulator-always-on;
623 regulator-boot-on;
624 regulator-min-microvolt = <1800000>;
625 regulator-max-microvolt = <1800000>;
626
627 regulator-state-mem {
628 regulator-off-in-suspend;
629 };
630 };
631
632 vcc_1v8_s0: pldo-reg2 {
633 regulator-name = "vcc_1v8_s0";
634 regulator-always-on;
635 regulator-boot-on;
636 regulator-min-microvolt = <1800000>;
637 regulator-max-microvolt = <1800000>;
638
639 regulator-state-mem {
640 regulator-off-in-suspend;
641 regulator-suspend-microvolt = <1800000>;
642 };
643 };
644
645 vdda_1v2_s0: pldo-reg3 {
646 regulator-name = "vdda_1v2_s0";
647 regulator-always-on;
648 regulator-boot-on;
649 regulator-min-microvolt = <1200000>;
650 regulator-max-microvolt = <1200000>;
651
652 regulator-state-mem {
653 regulator-off-in-suspend;
654 };
655 };
656
657 vcca_3v3_s0: pldo-reg4 {
658 regulator-name = "vcca_3v3_s0";
659 regulator-always-on;
660 regulator-boot-on;
661 regulator-min-microvolt = <3300000>;
662 regulator-max-microvolt = <3300000>;
663 regulator-ramp-delay = <12500>;
664
665 regulator-state-mem {
666 regulator-off-in-suspend;
667 };
668 };
669
670 vccio_sd_s0: pldo-reg5 {
671 regulator-name = "vccio_sd_s0";
672 regulator-always-on;
673 regulator-boot-on;
674 regulator-min-microvolt = <1800000>;
675 regulator-max-microvolt = <3300000>;
676 regulator-ramp-delay = <12500>;
677
678 regulator-state-mem {
679 regulator-off-in-suspend;
680 };
681 };
682
683 pldo6_s3: pldo-reg6 {
684 regulator-name = "pldo6_s3";
685 regulator-always-on;
686 regulator-boot-on;
687 regulator-min-microvolt = <1800000>;
688 regulator-max-microvolt = <1800000>;
689
690 regulator-state-mem {
691 regulator-on-in-suspend;
692 regulator-suspend-microvolt = <1800000>;
693 };
694 };
695
696 vdd_0v75_s3: nldo-reg1 {
697 regulator-name = "vdd_0v75_s3";
698 regulator-always-on;
699 regulator-boot-on;
700 regulator-min-microvolt = <750000>;
701 regulator-max-microvolt = <750000>;
702
703 regulator-state-mem {
704 regulator-on-in-suspend;
705 regulator-suspend-microvolt = <750000>;
706 };
707 };
708
709 vdda_ddr_pll_s0: nldo-reg2 {
710 regulator-name = "vdda_ddr_pll_s0";
711 regulator-always-on;
712 regulator-boot-on;
713 regulator-min-microvolt = <850000>;
714 regulator-max-microvolt = <850000>;
715
716 regulator-state-mem {
717 regulator-off-in-suspend;
718 regulator-suspend-microvolt = <850000>;
719 };
720 };
721
722 vdda_0v75_s0: nldo-reg3 {
723 regulator-name = "vdda_0v75_s0";
724 regulator-always-on;
725 regulator-boot-on;
726 regulator-min-microvolt = <750000>;
727 regulator-max-microvolt = <750000>;
728
729 regulator-state-mem {
730 regulator-off-in-suspend;
731 };
732 };
733
734 vdda_0v85_s0: nldo-reg4 {
735 regulator-name = "vdda_0v85_s0";
736 regulator-always-on;
737 regulator-boot-on;
738 regulator-min-microvolt = <850000>;
739 regulator-max-microvolt = <850000>;
740
741 regulator-state-mem {
742 regulator-off-in-suspend;
743 };
744 };
745
746 vdd_0v75_s0: nldo-reg5 {
747 regulator-name = "vdd_0v75_s0";
748 regulator-always-on;
749 regulator-boot-on;
750 regulator-min-microvolt = <750000>;
751 regulator-max-microvolt = <750000>;
752
753 regulator-state-mem {
754 regulator-off-in-suspend;
755 };
756 };
757 };
758 };
759 };
760
761 &tsadc {
762 status = "okay";
763 };
764
765 /* Routed to UART0 on the Q7 connector */
766 &uart2 {
767 pinctrl-0 = <&uart2m2_xfer>;
768 };
769
770 /* Mule-ATtiny UPDI */
771 &uart4 {
772 pinctrl-0 = <&uart4m2_xfer>;
773 status = "okay";
774 };