Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3588-rock-5b-plus.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3 /dts-v1/;
4
5 #include "rk3588-rock-5b.dtsi"
6
7 / {
8 model = "Radxa ROCK 5B+";
9 compatible = "radxa,rock-5b-plus", "rockchip,rk3588";
10
11 rfkill-wwan {
12 compatible = "rfkill-gpio";
13 label = "rfkill-m2-wwan";
14 radio-type = "wwan";
15 shutdown-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
16 };
17
18 vcc3v3_4g: regulator-vcc3v3-4g {
19 compatible = "regulator-fixed";
20 enable-active-high;
21 gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
22 /* pinctrl for the GPIO is requested by vcc3v3_pcie2x1l0 */
23 regulator-name = "vcc3v3_4g";
24 regulator-always-on;
25 regulator-boot-on;
26 regulator-min-microvolt = <3300000>;
27 regulator-max-microvolt = <3300000>;
28 startup-delay-us = <50000>;
29 vin-supply = <&vcc5v0_sys>;
30 };
31
32 vcc3v3_wwan_pwr: regulator-vcc3v3-wwan {
33 compatible = "regulator-fixed";
34 enable-active-high;
35 gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
36 pinctrl-names = "default";
37 pinctrl-0 = <&wwan_power_en>;
38 regulator-name = "vcc3v3_wwan_pwr";
39 regulator-always-on;
40 regulator-boot-on;
41 regulator-min-microvolt = <3300000>;
42 regulator-max-microvolt = <3300000>;
43 vin-supply = <&vcc3v3_4g>;
44 };
45 };
46
47 &gpio0 {
48 wwan-disable2-n-hog {
49 gpios = <RK_PB2 GPIO_ACTIVE_LOW>;
50 output-low;
51 line-name = "M.2 B-key W_DISABLE2#";
52 gpio-hog;
53 };
54 };
55
56 &gpio2 {
57 wwan-reset-n-hog {
58 gpios = <RK_PB3 GPIO_ACTIVE_LOW>;
59 output-low;
60 line-name = "M.2 B-key RESET#";
61 gpio-hog;
62 };
63
64 wwan-wake-n-hog {
65 gpios = <RK_PB2 GPIO_ACTIVE_LOW>;
66 input;
67 line-name = "M.2 B-key WoWWAN#";
68 gpio-hog;
69 };
70 };
71
72 &i2c1 {
73 eeprom@50 {
74 compatible = "belling,bl24c16a", "atmel,24c16";
75 reg = <0x50>;
76 pagesize = <16>;
77 read-only;
78 vcc-supply = <&vcc_3v3_s3>;
79 };
80 };
81
82 &pcie30phy {
83 data-lanes = <1 1 2 2>;
84 };
85
86 &pcie3x2 {
87 pinctrl-names = "default";
88 pinctrl-0 = <&pcie3x2_rst>;
89 reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
90 vpcie3v3-supply = <&vcc3v3_pcie30>;
91 status = "okay";
92 };
93
94 &pcie3x4 {
95 num-lanes = <2>;
96 };
97
98 &pinctrl {
99 wwan {
100 wwan_power_en: wwan-pwr-en {
101 rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
102 };
103 };
104
105 pcie3 {
106 pcie3x2_rst: pcie3x2-rst {
107 rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
108 };
109 };
110
111 usb {
112 usbc_sbu_dc: usbc-sbu-dc {
113 rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
114 <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
115 };
116
117 vcc5v0_host_en: vcc5v0-host-en {
118 rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
119 };
120 };
121 };
122
123 &usb_con {
124 power-role = "dual";
125 try-power-role = "sink";
126 };
127
128 &usbdp_phy0 {
129 pinctrl-names = "default";
130 pinctrl-0 = <&usbc_sbu_dc>;
131 sbu1-dc-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
132 sbu2-dc-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
133 };
134
135 &vcc5v0_host {
136 enable-active-high;
137 gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
138 pinctrl-names = "default";
139 pinctrl-0 = <&vcc5v0_host_en>;
140 };