| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/gpio/gpio.h> |
| 6 |
#include <dt-bindings/leds/common.h> |
| 7 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 8 |
#include <dt-bindings/usb/pd.h> |
| 9 |
#include "rk3588.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
aliases { |
| 13 |
mmc0 = &sdhci; |
| 14 |
mmc1 = &sdmmc; |
| 15 |
mmc2 = &sdio; |
| 16 |
}; |
| 17 |
|
| 18 |
chosen { |
| 19 |
stdout-path = "serial2:1500000n8"; |
| 20 |
}; |
| 21 |
|
| 22 |
hdmi0-con { |
| 23 |
compatible = "hdmi-connector"; |
| 24 |
type = "a"; |
| 25 |
|
| 26 |
port { |
| 27 |
hdmi0_con_in: endpoint { |
| 28 |
remote-endpoint = <&hdmi0_out_con>; |
| 29 |
}; |
| 30 |
}; |
| 31 |
}; |
| 32 |
|
| 33 |
hdmi1-con { |
| 34 |
compatible = "hdmi-connector"; |
| 35 |
type = "a"; |
| 36 |
|
| 37 |
port { |
| 38 |
hdmi1_con_in: endpoint { |
| 39 |
remote-endpoint = <&hdmi1_out_con>; |
| 40 |
}; |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
fan: pwm-fan { |
| 45 |
compatible = "pwm-fan"; |
| 46 |
cooling-levels = <0 120 150 180 210 240 255>; |
| 47 |
fan-supply = <&vcc5v0_sys>; |
| 48 |
pwms = <&pwm1 0 50000 0>; |
| 49 |
#cooling-cells = <2>; |
| 50 |
}; |
| 51 |
|
| 52 |
rfkill-bt { |
| 53 |
compatible = "rfkill-gpio"; |
| 54 |
label = "rfkill-m2-bt"; |
| 55 |
radio-type = "bluetooth"; |
| 56 |
shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; |
| 57 |
}; |
| 58 |
|
| 59 |
vbus5v0_typec: vbus5v0-typec { |
| 60 |
compatible = "regulator-fixed"; |
| 61 |
enable-active-high; |
| 62 |
gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; |
| 63 |
pinctrl-names = "default"; |
| 64 |
pinctrl-0 = <&vbus5v0_typec_en>; |
| 65 |
regulator-name = "vbus5v0_typec"; |
| 66 |
regulator-min-microvolt = <5000000>; |
| 67 |
regulator-max-microvolt = <5000000>; |
| 68 |
vin-supply = <&vcc5v0_sys>; |
| 69 |
}; |
| 70 |
|
| 71 |
vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 { |
| 72 |
compatible = "regulator-fixed"; |
| 73 |
enable-active-high; |
| 74 |
regulator-name = "vcc3v3_pcie2x1l0"; |
| 75 |
regulator-always-on; |
| 76 |
regulator-boot-on; |
| 77 |
regulator-min-microvolt = <3300000>; |
| 78 |
regulator-max-microvolt = <3300000>; |
| 79 |
startup-delay-us = <50000>; |
| 80 |
vin-supply = <&vcc5v0_sys>; |
| 81 |
status = "disabled"; |
| 82 |
}; |
| 83 |
|
| 84 |
vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 { |
| 85 |
compatible = "regulator-fixed"; |
| 86 |
regulator-name = "vcc3v3_pcie2x1l2"; |
| 87 |
regulator-min-microvolt = <3300000>; |
| 88 |
regulator-max-microvolt = <3300000>; |
| 89 |
startup-delay-us = <5000>; |
| 90 |
vin-supply = <&vcc_3v3_s3>; |
| 91 |
}; |
| 92 |
|
| 93 |
vcc3v3_pcie30: regulator-vcc3v3-pcie30 { |
| 94 |
compatible = "regulator-fixed"; |
| 95 |
enable-active-high; |
| 96 |
gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; |
| 97 |
pinctrl-names = "default"; |
| 98 |
pinctrl-0 = <&pcie3_vcc3v3_en>; |
| 99 |
regulator-name = "vcc3v3_pcie30"; |
| 100 |
regulator-min-microvolt = <3300000>; |
| 101 |
regulator-max-microvolt = <3300000>; |
| 102 |
startup-delay-us = <5000>; |
| 103 |
vin-supply = <&vcc5v0_sys>; |
| 104 |
}; |
| 105 |
|
| 106 |
vcc5v0_host: regulator-vcc5v0-host { |
| 107 |
compatible = "regulator-fixed"; |
| 108 |
regulator-name = "vcc5v0_host"; |
| 109 |
regulator-boot-on; |
| 110 |
regulator-always-on; |
| 111 |
regulator-min-microvolt = <5000000>; |
| 112 |
regulator-max-microvolt = <5000000>; |
| 113 |
vin-supply = <&vcc5v0_sys>; |
| 114 |
}; |
| 115 |
|
| 116 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 117 |
compatible = "regulator-fixed"; |
| 118 |
regulator-name = "vcc5v0_sys"; |
| 119 |
regulator-always-on; |
| 120 |
regulator-boot-on; |
| 121 |
regulator-min-microvolt = <5000000>; |
| 122 |
regulator-max-microvolt = <5000000>; |
| 123 |
}; |
| 124 |
|
| 125 |
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { |
| 126 |
compatible = "regulator-fixed"; |
| 127 |
regulator-name = "vcc_1v1_nldo_s3"; |
| 128 |
regulator-always-on; |
| 129 |
regulator-boot-on; |
| 130 |
regulator-min-microvolt = <1100000>; |
| 131 |
regulator-max-microvolt = <1100000>; |
| 132 |
vin-supply = <&vcc5v0_sys>; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
&combphy0_ps { |
| 137 |
status = "okay"; |
| 138 |
}; |
| 139 |
|
| 140 |
&combphy1_ps { |
| 141 |
status = "okay"; |
| 142 |
}; |
| 143 |
|
| 144 |
&combphy2_psu { |
| 145 |
status = "okay"; |
| 146 |
}; |
| 147 |
|
| 148 |
&cpu_b0 { |
| 149 |
cpu-supply = <&vdd_cpu_big0_s0>; |
| 150 |
}; |
| 151 |
|
| 152 |
&cpu_b1 { |
| 153 |
cpu-supply = <&vdd_cpu_big0_s0>; |
| 154 |
}; |
| 155 |
|
| 156 |
&cpu_b2 { |
| 157 |
cpu-supply = <&vdd_cpu_big1_s0>; |
| 158 |
}; |
| 159 |
|
| 160 |
&cpu_b3 { |
| 161 |
cpu-supply = <&vdd_cpu_big1_s0>; |
| 162 |
}; |
| 163 |
|
| 164 |
&cpu_l0 { |
| 165 |
cpu-supply = <&vdd_cpu_lit_s0>; |
| 166 |
}; |
| 167 |
|
| 168 |
&cpu_l1 { |
| 169 |
cpu-supply = <&vdd_cpu_lit_s0>; |
| 170 |
}; |
| 171 |
|
| 172 |
&cpu_l2 { |
| 173 |
cpu-supply = <&vdd_cpu_lit_s0>; |
| 174 |
}; |
| 175 |
|
| 176 |
&cpu_l3 { |
| 177 |
cpu-supply = <&vdd_cpu_lit_s0>; |
| 178 |
}; |
| 179 |
|
| 180 |
&gpu { |
| 181 |
mali-supply = <&vdd_gpu_s0>; |
| 182 |
status = "okay"; |
| 183 |
}; |
| 184 |
|
| 185 |
&hdmi0 { |
| 186 |
status = "okay"; |
| 187 |
}; |
| 188 |
|
| 189 |
&hdmi0_in { |
| 190 |
hdmi0_in_vp0: endpoint { |
| 191 |
remote-endpoint = <&vp0_out_hdmi0>; |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
&hdmi0_out { |
| 196 |
hdmi0_out_con: endpoint { |
| 197 |
remote-endpoint = <&hdmi0_con_in>; |
| 198 |
}; |
| 199 |
}; |
| 200 |
|
| 201 |
&hdmi0_sound { |
| 202 |
status = "okay"; |
| 203 |
}; |
| 204 |
|
| 205 |
&hdmi1 { |
| 206 |
pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd |
| 207 |
&hdmim1_tx1_scl &hdmim1_tx1_sda>; |
| 208 |
status = "okay"; |
| 209 |
}; |
| 210 |
|
| 211 |
&hdmi1_in { |
| 212 |
hdmi1_in_vp1: endpoint { |
| 213 |
remote-endpoint = <&vp1_out_hdmi1>; |
| 214 |
}; |
| 215 |
}; |
| 216 |
|
| 217 |
&hdmi1_out { |
| 218 |
hdmi1_out_con: endpoint { |
| 219 |
remote-endpoint = <&hdmi1_con_in>; |
| 220 |
}; |
| 221 |
}; |
| 222 |
|
| 223 |
&hdmi1_sound { |
| 224 |
status = "okay"; |
| 225 |
}; |
| 226 |
|
| 227 |
&hdmi_receiver_cma { |
| 228 |
status = "okay"; |
| 229 |
}; |
| 230 |
|
| 231 |
&hdmi_receiver { |
| 232 |
pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>; |
| 233 |
pinctrl-names = "default"; |
| 234 |
}; |
| 235 |
|
| 236 |
&hdptxphy0 { |
| 237 |
status = "okay"; |
| 238 |
}; |
| 239 |
|
| 240 |
&hdptxphy1 { |
| 241 |
status = "okay"; |
| 242 |
}; |
| 243 |
|
| 244 |
&i2c0 { |
| 245 |
pinctrl-names = "default"; |
| 246 |
pinctrl-0 = <&i2c0m2_xfer>; |
| 247 |
status = "okay"; |
| 248 |
|
| 249 |
vdd_cpu_big0_s0: regulator@42 { |
| 250 |
compatible = "rockchip,rk8602"; |
| 251 |
reg = <0x42>; |
| 252 |
fcs,suspend-voltage-selector = <1>; |
| 253 |
regulator-name = "vdd_cpu_big0_s0"; |
| 254 |
regulator-always-on; |
| 255 |
regulator-boot-on; |
| 256 |
regulator-min-microvolt = <550000>; |
| 257 |
regulator-max-microvolt = <1050000>; |
| 258 |
regulator-ramp-delay = <2300>; |
| 259 |
vin-supply = <&vcc5v0_sys>; |
| 260 |
|
| 261 |
regulator-state-mem { |
| 262 |
regulator-off-in-suspend; |
| 263 |
}; |
| 264 |
}; |
| 265 |
|
| 266 |
vdd_cpu_big1_s0: regulator@43 { |
| 267 |
compatible = "rockchip,rk8603", "rockchip,rk8602"; |
| 268 |
reg = <0x43>; |
| 269 |
fcs,suspend-voltage-selector = <1>; |
| 270 |
regulator-name = "vdd_cpu_big1_s0"; |
| 271 |
regulator-always-on; |
| 272 |
regulator-boot-on; |
| 273 |
regulator-min-microvolt = <550000>; |
| 274 |
regulator-max-microvolt = <1050000>; |
| 275 |
regulator-ramp-delay = <2300>; |
| 276 |
vin-supply = <&vcc5v0_sys>; |
| 277 |
|
| 278 |
regulator-state-mem { |
| 279 |
regulator-off-in-suspend; |
| 280 |
}; |
| 281 |
}; |
| 282 |
}; |
| 283 |
|
| 284 |
&i2c1 { |
| 285 |
pinctrl-names = "default"; |
| 286 |
pinctrl-0 = <&i2c1m2_xfer>; |
| 287 |
status = "okay"; |
| 288 |
|
| 289 |
vdd_npu_s0: regulator@42 { |
| 290 |
compatible = "rockchip,rk8602"; |
| 291 |
reg = <0x42>; |
| 292 |
fcs,suspend-voltage-selector = <1>; |
| 293 |
regulator-name = "vdd_npu_s0"; |
| 294 |
regulator-boot-on; |
| 295 |
regulator-enable-ramp-delay = <500>; |
| 296 |
regulator-min-microvolt = <550000>; |
| 297 |
regulator-max-microvolt = <950000>; |
| 298 |
regulator-ramp-delay = <2300>; |
| 299 |
vin-supply = <&vcc5v0_sys>; |
| 300 |
|
| 301 |
regulator-state-mem { |
| 302 |
regulator-off-in-suspend; |
| 303 |
}; |
| 304 |
}; |
| 305 |
}; |
| 306 |
|
| 307 |
&i2c4 { |
| 308 |
pinctrl-names = "default"; |
| 309 |
pinctrl-0 = <&i2c4m1_xfer>; |
| 310 |
status = "okay"; |
| 311 |
|
| 312 |
usbc0: usb-typec@22 { |
| 313 |
compatible = "fcs,fusb302"; |
| 314 |
reg = <0x22>; |
| 315 |
interrupt-parent = <&gpio3>; |
| 316 |
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; |
| 317 |
pinctrl-names = "default"; |
| 318 |
pinctrl-0 = <&usbc0_int>; |
| 319 |
vbus-supply = <&vbus5v0_typec>; |
| 320 |
/* |
| 321 |
* When the board is starting to send power-delivery messages |
| 322 |
* too late (5 seconds according to the specification), the |
| 323 |
* power-supply reacts with a hard-reset. That removes the |
| 324 |
* power from VBUS for some time, which resets te whole board. |
| 325 |
*/ |
| 326 |
status = "fail"; |
| 327 |
|
| 328 |
usb_con: connector { |
| 329 |
compatible = "usb-c-connector"; |
| 330 |
label = "USB-C"; |
| 331 |
data-role = "dual"; |
| 332 |
/* fusb302 supports PD Rev 2.0 Ver 1.2 */ |
| 333 |
pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>; |
| 334 |
op-sink-microwatt = <1000000>; |
| 335 |
sink-pdos = |
| 336 |
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>, |
| 337 |
<PDO_VAR(5000, 20000, 5000)>; |
| 338 |
source-pdos = |
| 339 |
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; |
| 340 |
|
| 341 |
altmodes { |
| 342 |
displayport { |
| 343 |
svid = /bits/ 16 <0xff01>; |
| 344 |
vdo = <0xffffffff>; |
| 345 |
}; |
| 346 |
}; |
| 347 |
|
| 348 |
ports { |
| 349 |
#address-cells = <1>; |
| 350 |
#size-cells = <0>; |
| 351 |
|
| 352 |
port@0 { |
| 353 |
reg = <0>; |
| 354 |
usbc0_hs: endpoint { |
| 355 |
remote-endpoint = <&usb_host0_xhci_to_usbc0>; |
| 356 |
}; |
| 357 |
}; |
| 358 |
|
| 359 |
port@1 { |
| 360 |
reg = <1>; |
| 361 |
usbc0_ss: endpoint { |
| 362 |
remote-endpoint = <&usbdp_phy0_ss>; |
| 363 |
}; |
| 364 |
}; |
| 365 |
|
| 366 |
port@2 { |
| 367 |
reg = <2>; |
| 368 |
usbc0_sbu: endpoint { |
| 369 |
remote-endpoint = <&usbdp_phy0_sbu>; |
| 370 |
}; |
| 371 |
}; |
| 372 |
}; |
| 373 |
}; |
| 374 |
}; |
| 375 |
}; |
| 376 |
|
| 377 |
&i2c6 { |
| 378 |
status = "okay"; |
| 379 |
|
| 380 |
hym8563: rtc@51 { |
| 381 |
compatible = "haoyu,hym8563"; |
| 382 |
reg = <0x51>; |
| 383 |
#clock-cells = <0>; |
| 384 |
clock-output-names = "hym8563"; |
| 385 |
pinctrl-names = "default"; |
| 386 |
pinctrl-0 = <&hym8563_int>; |
| 387 |
interrupt-parent = <&gpio0>; |
| 388 |
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; |
| 389 |
wakeup-source; |
| 390 |
}; |
| 391 |
}; |
| 392 |
|
| 393 |
&i2c7 { |
| 394 |
status = "okay"; |
| 395 |
|
| 396 |
es8316: audio-codec@11 { |
| 397 |
compatible = "everest,es8316"; |
| 398 |
reg = <0x11>; |
| 399 |
clocks = <&cru I2S0_8CH_MCLKOUT>; |
| 400 |
clock-names = "mclk"; |
| 401 |
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; |
| 402 |
assigned-clock-rates = <12288000>; |
| 403 |
#sound-dai-cells = <0>; |
| 404 |
|
| 405 |
port { |
| 406 |
es8316_p0_0: endpoint { |
| 407 |
remote-endpoint = <&i2s0_8ch_p0_0>; |
| 408 |
}; |
| 409 |
}; |
| 410 |
}; |
| 411 |
}; |
| 412 |
|
| 413 |
&i2s0_8ch { |
| 414 |
pinctrl-names = "default"; |
| 415 |
pinctrl-0 = <&i2s0_lrck |
| 416 |
&i2s0_mclk |
| 417 |
&i2s0_sclk |
| 418 |
&i2s0_sdi0 |
| 419 |
&i2s0_sdo0>; |
| 420 |
status = "okay"; |
| 421 |
|
| 422 |
i2s0_8ch_p0: port { |
| 423 |
i2s0_8ch_p0_0: endpoint { |
| 424 |
dai-format = "i2s"; |
| 425 |
mclk-fs = <256>; |
| 426 |
remote-endpoint = <&es8316_p0_0>; |
| 427 |
}; |
| 428 |
}; |
| 429 |
}; |
| 430 |
|
| 431 |
&i2s5_8ch { |
| 432 |
status = "okay"; |
| 433 |
}; |
| 434 |
|
| 435 |
&i2s6_8ch { |
| 436 |
status = "okay"; |
| 437 |
}; |
| 438 |
|
| 439 |
&package_thermal { |
| 440 |
polling-delay = <1000>; |
| 441 |
|
| 442 |
trips { |
| 443 |
package_fan0: package-fan0 { |
| 444 |
temperature = <55000>; |
| 445 |
hysteresis = <2000>; |
| 446 |
type = "active"; |
| 447 |
}; |
| 448 |
|
| 449 |
package_fan1: package-fan1 { |
| 450 |
temperature = <65000>; |
| 451 |
hysteresis = <2000>; |
| 452 |
type = "active"; |
| 453 |
}; |
| 454 |
}; |
| 455 |
|
| 456 |
cooling-maps { |
| 457 |
map0 { |
| 458 |
trip = <&package_fan0>; |
| 459 |
cooling-device = <&fan THERMAL_NO_LIMIT 1>; |
| 460 |
}; |
| 461 |
|
| 462 |
map1 { |
| 463 |
trip = <&package_fan1>; |
| 464 |
cooling-device = <&fan 2 THERMAL_NO_LIMIT>; |
| 465 |
}; |
| 466 |
}; |
| 467 |
}; |
| 468 |
|
| 469 |
&pcie2x1l0 { |
| 470 |
pinctrl-names = "default"; |
| 471 |
pinctrl-0 = <&pcie2_0_rst>; |
| 472 |
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 473 |
vpcie3v3-supply = <&vcc3v3_pcie2x1l0>; |
| 474 |
status = "okay"; |
| 475 |
}; |
| 476 |
|
| 477 |
&pcie2x1l2 { |
| 478 |
pinctrl-names = "default"; |
| 479 |
pinctrl-0 = <&pcie2_2_rst>; |
| 480 |
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; |
| 481 |
vpcie3v3-supply = <&vcc3v3_pcie2x1l2>; |
| 482 |
status = "okay"; |
| 483 |
}; |
| 484 |
|
| 485 |
&pcie30phy { |
| 486 |
status = "okay"; |
| 487 |
}; |
| 488 |
|
| 489 |
&pcie3x4 { |
| 490 |
pinctrl-names = "default"; |
| 491 |
pinctrl-0 = <&pcie3_rst>; |
| 492 |
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; |
| 493 |
vpcie3v3-supply = <&vcc3v3_pcie30>; |
| 494 |
status = "okay"; |
| 495 |
}; |
| 496 |
|
| 497 |
&pd_gpu { |
| 498 |
domain-supply = <&vdd_gpu_s0>; |
| 499 |
}; |
| 500 |
|
| 501 |
&pd_npu { |
| 502 |
domain-supply = <&vdd_npu_s0>; |
| 503 |
}; |
| 504 |
|
| 505 |
&pinctrl { |
| 506 |
hym8563 { |
| 507 |
hym8563_int: hym8563-int { |
| 508 |
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 509 |
}; |
| 510 |
}; |
| 511 |
|
| 512 |
mmc { |
| 513 |
sdmmc_det_pin: sdmmc-det-pin { |
| 514 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 515 |
}; |
| 516 |
}; |
| 517 |
|
| 518 |
pcie2 { |
| 519 |
pcie2_0_rst: pcie2-0-rst { |
| 520 |
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 521 |
}; |
| 522 |
|
| 523 |
pcie2_2_rst: pcie2-2-rst { |
| 524 |
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 525 |
}; |
| 526 |
}; |
| 527 |
|
| 528 |
pcie3 { |
| 529 |
pcie3_rst: pcie3-rst { |
| 530 |
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 531 |
}; |
| 532 |
|
| 533 |
pcie3_vcc3v3_en: pcie3-vcc3v3-en { |
| 534 |
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 535 |
}; |
| 536 |
}; |
| 537 |
|
| 538 |
usb { |
| 539 |
usbc0_int: usbc0-int { |
| 540 |
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 541 |
}; |
| 542 |
|
| 543 |
vbus5v0_typec_en: vbus5v0-typec-en { |
| 544 |
rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 545 |
}; |
| 546 |
}; |
| 547 |
}; |
| 548 |
|
| 549 |
&pwm1 { |
| 550 |
status = "okay"; |
| 551 |
}; |
| 552 |
|
| 553 |
&rknn_core_0 { |
| 554 |
npu-supply = <&vdd_npu_s0>; |
| 555 |
sram-supply = <&vdd_npu_s0>; |
| 556 |
status = "okay"; |
| 557 |
}; |
| 558 |
|
| 559 |
&rknn_core_1 { |
| 560 |
npu-supply = <&vdd_npu_s0>; |
| 561 |
sram-supply = <&vdd_npu_s0>; |
| 562 |
status = "okay"; |
| 563 |
}; |
| 564 |
|
| 565 |
&rknn_core_2 { |
| 566 |
npu-supply = <&vdd_npu_s0>; |
| 567 |
sram-supply = <&vdd_npu_s0>; |
| 568 |
status = "okay"; |
| 569 |
}; |
| 570 |
|
| 571 |
&rknn_mmu_0 { |
| 572 |
status = "okay"; |
| 573 |
}; |
| 574 |
|
| 575 |
&rknn_mmu_1 { |
| 576 |
status = "okay"; |
| 577 |
}; |
| 578 |
|
| 579 |
&rknn_mmu_2 { |
| 580 |
status = "okay"; |
| 581 |
}; |
| 582 |
|
| 583 |
&saradc { |
| 584 |
vref-supply = <&avcc_1v8_s0>; |
| 585 |
status = "okay"; |
| 586 |
}; |
| 587 |
|
| 588 |
&sdhci { |
| 589 |
bus-width = <8>; |
| 590 |
no-sdio; |
| 591 |
no-sd; |
| 592 |
non-removable; |
| 593 |
mmc-hs400-1_8v; |
| 594 |
mmc-hs400-enhanced-strobe; |
| 595 |
status = "okay"; |
| 596 |
}; |
| 597 |
|
| 598 |
&sdmmc { |
| 599 |
no-sdio; |
| 600 |
no-mmc; |
| 601 |
bus-width = <4>; |
| 602 |
cap-mmc-highspeed; |
| 603 |
cap-sd-highspeed; |
| 604 |
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 605 |
disable-wp; |
| 606 |
pinctrl-names = "default"; |
| 607 |
pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det_pin>; |
| 608 |
sd-uhs-sdr104; |
| 609 |
vmmc-supply = <&vcc_3v3_s3>; |
| 610 |
vqmmc-supply = <&vccio_sd_s0>; |
| 611 |
status = "okay"; |
| 612 |
}; |
| 613 |
|
| 614 |
&sfc { |
| 615 |
pinctrl-names = "default"; |
| 616 |
pinctrl-0 = <&fspim2_pins>; |
| 617 |
status = "okay"; |
| 618 |
|
| 619 |
flash@0 { |
| 620 |
compatible = "jedec,spi-nor"; |
| 621 |
reg = <0>; |
| 622 |
spi-max-frequency = <104000000>; |
| 623 |
spi-rx-bus-width = <4>; |
| 624 |
spi-tx-bus-width = <1>; |
| 625 |
vcc-supply = <&vcc_3v3_s3>; |
| 626 |
}; |
| 627 |
}; |
| 628 |
|
| 629 |
&spi2 { |
| 630 |
status = "okay"; |
| 631 |
assigned-clocks = <&cru CLK_SPI2>; |
| 632 |
assigned-clock-rates = <200000000>; |
| 633 |
pinctrl-names = "default"; |
| 634 |
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; |
| 635 |
num-cs = <1>; |
| 636 |
|
| 637 |
pmic@0 { |
| 638 |
compatible = "rockchip,rk806"; |
| 639 |
spi-max-frequency = <1000000>; |
| 640 |
reg = <0x0>; |
| 641 |
|
| 642 |
interrupt-parent = <&gpio0>; |
| 643 |
interrupts = <7 IRQ_TYPE_LEVEL_LOW>; |
| 644 |
|
| 645 |
pinctrl-names = "default"; |
| 646 |
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, |
| 647 |
<&rk806_dvs2_null>, <&rk806_dvs3_null>; |
| 648 |
|
| 649 |
system-power-controller; |
| 650 |
|
| 651 |
vcc1-supply = <&vcc5v0_sys>; |
| 652 |
vcc2-supply = <&vcc5v0_sys>; |
| 653 |
vcc3-supply = <&vcc5v0_sys>; |
| 654 |
vcc4-supply = <&vcc5v0_sys>; |
| 655 |
vcc5-supply = <&vcc5v0_sys>; |
| 656 |
vcc6-supply = <&vcc5v0_sys>; |
| 657 |
vcc7-supply = <&vcc5v0_sys>; |
| 658 |
vcc8-supply = <&vcc5v0_sys>; |
| 659 |
vcc9-supply = <&vcc5v0_sys>; |
| 660 |
vcc10-supply = <&vcc5v0_sys>; |
| 661 |
vcc11-supply = <&vcc_2v0_pldo_s3>; |
| 662 |
vcc12-supply = <&vcc5v0_sys>; |
| 663 |
vcc13-supply = <&vcc_1v1_nldo_s3>; |
| 664 |
vcc14-supply = <&vcc_1v1_nldo_s3>; |
| 665 |
vcca-supply = <&vcc5v0_sys>; |
| 666 |
|
| 667 |
gpio-controller; |
| 668 |
#gpio-cells = <2>; |
| 669 |
|
| 670 |
rk806_dvs1_null: dvs1-null-pins { |
| 671 |
pins = "gpio_pwrctrl1"; |
| 672 |
function = "pin_fun0"; |
| 673 |
}; |
| 674 |
|
| 675 |
rk806_dvs2_null: dvs2-null-pins { |
| 676 |
pins = "gpio_pwrctrl2"; |
| 677 |
function = "pin_fun0"; |
| 678 |
}; |
| 679 |
|
| 680 |
rk806_dvs3_null: dvs3-null-pins { |
| 681 |
pins = "gpio_pwrctrl3"; |
| 682 |
function = "pin_fun0"; |
| 683 |
}; |
| 684 |
|
| 685 |
regulators { |
| 686 |
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { |
| 687 |
regulator-boot-on; |
| 688 |
regulator-min-microvolt = <550000>; |
| 689 |
regulator-max-microvolt = <950000>; |
| 690 |
regulator-ramp-delay = <12500>; |
| 691 |
regulator-name = "vdd_gpu_s0"; |
| 692 |
regulator-enable-ramp-delay = <400>; |
| 693 |
|
| 694 |
regulator-state-mem { |
| 695 |
regulator-off-in-suspend; |
| 696 |
}; |
| 697 |
}; |
| 698 |
|
| 699 |
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { |
| 700 |
regulator-always-on; |
| 701 |
regulator-boot-on; |
| 702 |
regulator-min-microvolt = <550000>; |
| 703 |
regulator-max-microvolt = <950000>; |
| 704 |
regulator-ramp-delay = <12500>; |
| 705 |
regulator-name = "vdd_cpu_lit_s0"; |
| 706 |
|
| 707 |
regulator-state-mem { |
| 708 |
regulator-off-in-suspend; |
| 709 |
}; |
| 710 |
}; |
| 711 |
|
| 712 |
vdd_log_s0: dcdc-reg3 { |
| 713 |
regulator-always-on; |
| 714 |
regulator-boot-on; |
| 715 |
regulator-min-microvolt = <675000>; |
| 716 |
regulator-max-microvolt = <750000>; |
| 717 |
regulator-ramp-delay = <12500>; |
| 718 |
regulator-name = "vdd_log_s0"; |
| 719 |
|
| 720 |
regulator-state-mem { |
| 721 |
regulator-off-in-suspend; |
| 722 |
regulator-suspend-microvolt = <750000>; |
| 723 |
}; |
| 724 |
}; |
| 725 |
|
| 726 |
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { |
| 727 |
regulator-always-on; |
| 728 |
regulator-boot-on; |
| 729 |
regulator-min-microvolt = <550000>; |
| 730 |
regulator-max-microvolt = <950000>; |
| 731 |
regulator-ramp-delay = <12500>; |
| 732 |
regulator-name = "vdd_vdenc_s0"; |
| 733 |
|
| 734 |
regulator-state-mem { |
| 735 |
regulator-off-in-suspend; |
| 736 |
}; |
| 737 |
}; |
| 738 |
|
| 739 |
vdd_ddr_s0: dcdc-reg5 { |
| 740 |
regulator-always-on; |
| 741 |
regulator-boot-on; |
| 742 |
regulator-min-microvolt = <675000>; |
| 743 |
regulator-max-microvolt = <900000>; |
| 744 |
regulator-ramp-delay = <12500>; |
| 745 |
regulator-name = "vdd_ddr_s0"; |
| 746 |
|
| 747 |
regulator-state-mem { |
| 748 |
regulator-off-in-suspend; |
| 749 |
regulator-suspend-microvolt = <850000>; |
| 750 |
}; |
| 751 |
}; |
| 752 |
|
| 753 |
vdd2_ddr_s3: dcdc-reg6 { |
| 754 |
regulator-always-on; |
| 755 |
regulator-boot-on; |
| 756 |
regulator-name = "vdd2_ddr_s3"; |
| 757 |
|
| 758 |
regulator-state-mem { |
| 759 |
regulator-on-in-suspend; |
| 760 |
}; |
| 761 |
}; |
| 762 |
|
| 763 |
vcc_2v0_pldo_s3: dcdc-reg7 { |
| 764 |
regulator-always-on; |
| 765 |
regulator-boot-on; |
| 766 |
regulator-min-microvolt = <2000000>; |
| 767 |
regulator-max-microvolt = <2000000>; |
| 768 |
regulator-ramp-delay = <12500>; |
| 769 |
regulator-name = "vdd_2v0_pldo_s3"; |
| 770 |
|
| 771 |
regulator-state-mem { |
| 772 |
regulator-on-in-suspend; |
| 773 |
regulator-suspend-microvolt = <2000000>; |
| 774 |
}; |
| 775 |
}; |
| 776 |
|
| 777 |
vcc_3v3_s3: dcdc-reg8 { |
| 778 |
regulator-always-on; |
| 779 |
regulator-boot-on; |
| 780 |
regulator-min-microvolt = <3300000>; |
| 781 |
regulator-max-microvolt = <3300000>; |
| 782 |
regulator-name = "vcc_3v3_s3"; |
| 783 |
|
| 784 |
regulator-state-mem { |
| 785 |
regulator-on-in-suspend; |
| 786 |
regulator-suspend-microvolt = <3300000>; |
| 787 |
}; |
| 788 |
}; |
| 789 |
|
| 790 |
vddq_ddr_s0: dcdc-reg9 { |
| 791 |
regulator-always-on; |
| 792 |
regulator-boot-on; |
| 793 |
regulator-name = "vddq_ddr_s0"; |
| 794 |
|
| 795 |
regulator-state-mem { |
| 796 |
regulator-off-in-suspend; |
| 797 |
}; |
| 798 |
}; |
| 799 |
|
| 800 |
vcc_1v8_s3: dcdc-reg10 { |
| 801 |
regulator-always-on; |
| 802 |
regulator-boot-on; |
| 803 |
regulator-min-microvolt = <1800000>; |
| 804 |
regulator-max-microvolt = <1800000>; |
| 805 |
regulator-name = "vcc_1v8_s3"; |
| 806 |
|
| 807 |
regulator-state-mem { |
| 808 |
regulator-on-in-suspend; |
| 809 |
regulator-suspend-microvolt = <1800000>; |
| 810 |
}; |
| 811 |
}; |
| 812 |
|
| 813 |
avcc_1v8_s0: pldo-reg1 { |
| 814 |
regulator-always-on; |
| 815 |
regulator-boot-on; |
| 816 |
regulator-min-microvolt = <1800000>; |
| 817 |
regulator-max-microvolt = <1800000>; |
| 818 |
regulator-name = "avcc_1v8_s0"; |
| 819 |
|
| 820 |
regulator-state-mem { |
| 821 |
regulator-off-in-suspend; |
| 822 |
}; |
| 823 |
}; |
| 824 |
|
| 825 |
vcc_1v8_s0: pldo-reg2 { |
| 826 |
regulator-always-on; |
| 827 |
regulator-boot-on; |
| 828 |
regulator-min-microvolt = <1800000>; |
| 829 |
regulator-max-microvolt = <1800000>; |
| 830 |
regulator-name = "vcc_1v8_s0"; |
| 831 |
|
| 832 |
regulator-state-mem { |
| 833 |
regulator-off-in-suspend; |
| 834 |
regulator-suspend-microvolt = <1800000>; |
| 835 |
}; |
| 836 |
}; |
| 837 |
|
| 838 |
avdd_1v2_s0: pldo-reg3 { |
| 839 |
regulator-always-on; |
| 840 |
regulator-boot-on; |
| 841 |
regulator-min-microvolt = <1200000>; |
| 842 |
regulator-max-microvolt = <1200000>; |
| 843 |
regulator-name = "avdd_1v2_s0"; |
| 844 |
|
| 845 |
regulator-state-mem { |
| 846 |
regulator-off-in-suspend; |
| 847 |
}; |
| 848 |
}; |
| 849 |
|
| 850 |
vcc_3v3_s0: pldo-reg4 { |
| 851 |
regulator-always-on; |
| 852 |
regulator-boot-on; |
| 853 |
regulator-min-microvolt = <3300000>; |
| 854 |
regulator-max-microvolt = <3300000>; |
| 855 |
regulator-ramp-delay = <12500>; |
| 856 |
regulator-name = "vcc_3v3_s0"; |
| 857 |
|
| 858 |
regulator-state-mem { |
| 859 |
regulator-off-in-suspend; |
| 860 |
}; |
| 861 |
}; |
| 862 |
|
| 863 |
vccio_sd_s0: pldo-reg5 { |
| 864 |
regulator-always-on; |
| 865 |
regulator-boot-on; |
| 866 |
regulator-min-microvolt = <1800000>; |
| 867 |
regulator-max-microvolt = <3300000>; |
| 868 |
regulator-ramp-delay = <12500>; |
| 869 |
regulator-name = "vccio_sd_s0"; |
| 870 |
|
| 871 |
regulator-state-mem { |
| 872 |
regulator-off-in-suspend; |
| 873 |
}; |
| 874 |
}; |
| 875 |
|
| 876 |
pldo6_s3: pldo-reg6 { |
| 877 |
regulator-always-on; |
| 878 |
regulator-boot-on; |
| 879 |
regulator-min-microvolt = <1800000>; |
| 880 |
regulator-max-microvolt = <1800000>; |
| 881 |
regulator-name = "pldo6_s3"; |
| 882 |
|
| 883 |
regulator-state-mem { |
| 884 |
regulator-on-in-suspend; |
| 885 |
regulator-suspend-microvolt = <1800000>; |
| 886 |
}; |
| 887 |
}; |
| 888 |
|
| 889 |
vdd_0v75_s3: nldo-reg1 { |
| 890 |
regulator-always-on; |
| 891 |
regulator-boot-on; |
| 892 |
regulator-min-microvolt = <750000>; |
| 893 |
regulator-max-microvolt = <750000>; |
| 894 |
regulator-name = "vdd_0v75_s3"; |
| 895 |
|
| 896 |
regulator-state-mem { |
| 897 |
regulator-on-in-suspend; |
| 898 |
regulator-suspend-microvolt = <750000>; |
| 899 |
}; |
| 900 |
}; |
| 901 |
|
| 902 |
vdd_ddr_pll_s0: nldo-reg2 { |
| 903 |
regulator-always-on; |
| 904 |
regulator-boot-on; |
| 905 |
regulator-min-microvolt = <850000>; |
| 906 |
regulator-max-microvolt = <850000>; |
| 907 |
regulator-name = "vdd_ddr_pll_s0"; |
| 908 |
|
| 909 |
regulator-state-mem { |
| 910 |
regulator-off-in-suspend; |
| 911 |
regulator-suspend-microvolt = <850000>; |
| 912 |
}; |
| 913 |
}; |
| 914 |
|
| 915 |
avdd_0v75_s0: nldo-reg3 { |
| 916 |
regulator-always-on; |
| 917 |
regulator-boot-on; |
| 918 |
regulator-min-microvolt = <750000>; |
| 919 |
regulator-max-microvolt = <750000>; |
| 920 |
regulator-name = "avdd_0v75_s0"; |
| 921 |
|
| 922 |
regulator-state-mem { |
| 923 |
regulator-off-in-suspend; |
| 924 |
}; |
| 925 |
}; |
| 926 |
|
| 927 |
vdd_0v85_s0: nldo-reg4 { |
| 928 |
regulator-always-on; |
| 929 |
regulator-boot-on; |
| 930 |
regulator-min-microvolt = <850000>; |
| 931 |
regulator-max-microvolt = <850000>; |
| 932 |
regulator-name = "vdd_0v85_s0"; |
| 933 |
|
| 934 |
regulator-state-mem { |
| 935 |
regulator-off-in-suspend; |
| 936 |
}; |
| 937 |
}; |
| 938 |
|
| 939 |
vdd_0v75_s0: nldo-reg5 { |
| 940 |
regulator-always-on; |
| 941 |
regulator-boot-on; |
| 942 |
regulator-min-microvolt = <750000>; |
| 943 |
regulator-max-microvolt = <750000>; |
| 944 |
regulator-name = "vdd_0v75_s0"; |
| 945 |
|
| 946 |
regulator-state-mem { |
| 947 |
regulator-off-in-suspend; |
| 948 |
}; |
| 949 |
}; |
| 950 |
}; |
| 951 |
}; |
| 952 |
}; |
| 953 |
|
| 954 |
&tsadc { |
| 955 |
status = "okay"; |
| 956 |
}; |
| 957 |
|
| 958 |
&uart2 { |
| 959 |
pinctrl-0 = <&uart2m0_xfer>; |
| 960 |
status = "okay"; |
| 961 |
}; |
| 962 |
|
| 963 |
&u2phy0 { |
| 964 |
status = "okay"; |
| 965 |
}; |
| 966 |
|
| 967 |
&u2phy0_otg { |
| 968 |
status = "okay"; |
| 969 |
}; |
| 970 |
|
| 971 |
&u2phy1 { |
| 972 |
status = "okay"; |
| 973 |
}; |
| 974 |
|
| 975 |
&u2phy1_otg { |
| 976 |
status = "okay"; |
| 977 |
}; |
| 978 |
|
| 979 |
&u2phy2 { |
| 980 |
status = "okay"; |
| 981 |
}; |
| 982 |
|
| 983 |
&u2phy2_host { |
| 984 |
/* connected to USB hub, which is powered by vcc5v0_sys */ |
| 985 |
phy-supply = <&vcc5v0_sys>; |
| 986 |
status = "okay"; |
| 987 |
}; |
| 988 |
|
| 989 |
&u2phy3 { |
| 990 |
status = "okay"; |
| 991 |
}; |
| 992 |
|
| 993 |
&u2phy3_host { |
| 994 |
phy-supply = <&vcc5v0_host>; |
| 995 |
status = "okay"; |
| 996 |
}; |
| 997 |
|
| 998 |
&usbdp_phy0 { |
| 999 |
mode-switch; |
| 1000 |
orientation-switch; |
| 1001 |
status = "okay"; |
| 1002 |
|
| 1003 |
port { |
| 1004 |
#address-cells = <1>; |
| 1005 |
#size-cells = <0>; |
| 1006 |
|
| 1007 |
usbdp_phy0_ss: endpoint@0 { |
| 1008 |
reg = <0>; |
| 1009 |
remote-endpoint = <&usbc0_ss>; |
| 1010 |
}; |
| 1011 |
|
| 1012 |
usbdp_phy0_sbu: endpoint@1 { |
| 1013 |
reg = <1>; |
| 1014 |
remote-endpoint = <&usbc0_sbu>; |
| 1015 |
}; |
| 1016 |
}; |
| 1017 |
}; |
| 1018 |
|
| 1019 |
&usbdp_phy1 { |
| 1020 |
status = "okay"; |
| 1021 |
}; |
| 1022 |
|
| 1023 |
&usb_host0_ehci { |
| 1024 |
status = "okay"; |
| 1025 |
}; |
| 1026 |
|
| 1027 |
&usb_host0_ohci { |
| 1028 |
status = "okay"; |
| 1029 |
}; |
| 1030 |
|
| 1031 |
&usb_host0_xhci { |
| 1032 |
usb-role-switch; |
| 1033 |
status = "okay"; |
| 1034 |
|
| 1035 |
port { |
| 1036 |
usb_host0_xhci_to_usbc0: endpoint { |
| 1037 |
remote-endpoint = <&usbc0_hs>; |
| 1038 |
}; |
| 1039 |
}; |
| 1040 |
}; |
| 1041 |
|
| 1042 |
&usb_host1_ehci { |
| 1043 |
status = "okay"; |
| 1044 |
}; |
| 1045 |
|
| 1046 |
&usb_host1_ohci { |
| 1047 |
status = "okay"; |
| 1048 |
}; |
| 1049 |
|
| 1050 |
&usb_host1_xhci { |
| 1051 |
dr_mode = "host"; |
| 1052 |
status = "okay"; |
| 1053 |
}; |
| 1054 |
|
| 1055 |
&vop { |
| 1056 |
status = "okay"; |
| 1057 |
}; |
| 1058 |
|
| 1059 |
&vop_mmu { |
| 1060 |
status = "okay"; |
| 1061 |
}; |
| 1062 |
|
| 1063 |
&vp0 { |
| 1064 |
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 1065 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 1066 |
remote-endpoint = <&hdmi0_in_vp0>; |
| 1067 |
}; |
| 1068 |
}; |
| 1069 |
|
| 1070 |
&vp1 { |
| 1071 |
vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { |
| 1072 |
reg = <ROCKCHIP_VOP2_EP_HDMI1>; |
| 1073 |
remote-endpoint = <&hdmi1_in_vp1>; |
| 1074 |
}; |
| 1075 |
}; |