| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/gpio/gpio.h> |
| 6 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 7 |
#include "rk3588-orangepi-5.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator { |
| 11 |
compatible = "regulator-fixed"; |
| 12 |
enable-active-high; |
| 13 |
/* USB_OTG_PWREN */ |
| 14 |
gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; |
| 15 |
pinctrl-names = "default"; |
| 16 |
pinctrl-0 = <&usb_otg_pwren>; |
| 17 |
regulator-name = "vcc5v0_usb30_otg"; |
| 18 |
regulator-min-microvolt = <5000000>; |
| 19 |
regulator-max-microvolt = <5000000>; |
| 20 |
vin-supply = <&vcc5v0_sys>; |
| 21 |
}; |
| 22 |
}; |
| 23 |
|
| 24 |
&headphone_amp { |
| 25 |
/* PHONE_CTL */ |
| 26 |
enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; |
| 27 |
}; |
| 28 |
|
| 29 |
&analog_sound { |
| 30 |
pinctrl-names = "default"; |
| 31 |
pinctrl-0 = <&hp_detect>; |
| 32 |
simple-audio-card,aux-devs = <&headphone_amp>; |
| 33 |
simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; |
| 34 |
|
| 35 |
simple-audio-card,routing = |
| 36 |
"Headphones", "LOUT1", |
| 37 |
"Headphones", "ROUT1", |
| 38 |
"LINPUT1", "Microphone Jack", |
| 39 |
"RINPUT1", "Microphone Jack", |
| 40 |
"LINPUT2", "Onboard Microphone", |
| 41 |
"RINPUT2", "Onboard Microphone"; |
| 42 |
simple-audio-card,widgets = |
| 43 |
"Microphone", "Microphone Jack", |
| 44 |
"Microphone", "Onboard Microphone", |
| 45 |
"Headphone", "Headphones"; |
| 46 |
}; |
| 47 |
|
| 48 |
&fan { |
| 49 |
/* FAN_CTL_H */ |
| 50 |
pwms = <&pwm9 0 50000 0>; |
| 51 |
}; |
| 52 |
|
| 53 |
&hym8563 { |
| 54 |
interrupt-parent = <&gpio0>; |
| 55 |
interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>; |
| 56 |
pinctrl-names = "default"; |
| 57 |
pinctrl-0 = <&rtc_int_l>; |
| 58 |
}; |
| 59 |
|
| 60 |
&led_blue_pwm { |
| 61 |
/* PWM_LED1 */ |
| 62 |
status = "okay"; |
| 63 |
}; |
| 64 |
|
| 65 |
/* phy2 */ |
| 66 |
&pcie2x1l1 { |
| 67 |
reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; |
| 68 |
vpcie3v3-supply = <&vcc3v3_pcie_eth>; |
| 69 |
status = "okay"; |
| 70 |
}; |
| 71 |
|
| 72 |
&pinctrl { |
| 73 |
hym8563 { |
| 74 |
rtc_int_l: hym8563-int { |
| 75 |
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 76 |
}; |
| 77 |
}; |
| 78 |
|
| 79 |
sound { |
| 80 |
hp_detect: hp-detect { |
| 81 |
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
usb { |
| 86 |
usb_host_pwren: usb-host-pwren { |
| 87 |
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 88 |
}; |
| 89 |
}; |
| 90 |
|
| 91 |
wireless-bluetooth { |
| 92 |
bt_reg_on: bt-reg-on { |
| 93 |
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 94 |
}; |
| 95 |
|
| 96 |
bt_wake_host: bt-wake-host { |
| 97 |
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; |
| 98 |
}; |
| 99 |
|
| 100 |
host_wake_bt: host-wake-bt { |
| 101 |
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
}; |
| 105 |
|
| 106 |
&pwm4 { |
| 107 |
pinctrl-names = "default"; |
| 108 |
pinctrl-0 = <&pwm4m0_pins>; |
| 109 |
status = "okay"; |
| 110 |
}; |
| 111 |
|
| 112 |
&pwm5 { |
| 113 |
pinctrl-names = "default"; |
| 114 |
pinctrl-0 = <&pwm5m1_pins>; |
| 115 |
status = "okay"; |
| 116 |
}; |
| 117 |
|
| 118 |
&pwm9 { |
| 119 |
pinctrl-names = "default"; |
| 120 |
pinctrl-0 = <&pwm9m2_pins>; |
| 121 |
status = "okay"; |
| 122 |
}; |
| 123 |
|
| 124 |
&sfc { |
| 125 |
pinctrl-names = "default"; |
| 126 |
pinctrl-0 = <&fspim2_pins>; |
| 127 |
}; |
| 128 |
|
| 129 |
&u2phy0_otg { |
| 130 |
phy-supply = <&vcc5v0_usb30_otg>; |
| 131 |
}; |
| 132 |
|
| 133 |
&u2phy1_otg { |
| 134 |
phy-supply = <&vcc5v0_usb20>; |
| 135 |
}; |
| 136 |
|
| 137 |
&uart7 { |
| 138 |
pinctrl-names = "default"; |
| 139 |
pinctrl-0 = <&uart7m0_xfer &uart7m0_ctsn &uart7m0_rtsn>; |
| 140 |
uart-has-rtscts; |
| 141 |
status = "okay"; |
| 142 |
|
| 143 |
bluetooth { |
| 144 |
compatible = "brcm,bcm43438-bt"; |
| 145 |
clocks = <&hym8563>; |
| 146 |
clock-names = "lpo"; |
| 147 |
device-wakeup-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; |
| 148 |
interrupt-parent = <&gpio0>; |
| 149 |
interrupts = <RK_PA0 IRQ_TYPE_EDGE_FALLING>; |
| 150 |
interrupt-names = "host-wakeup"; |
| 151 |
pinctrl-names = "default"; |
| 152 |
pinctrl-0 = <&bt_reg_on>, <&host_wake_bt>, <&bt_wake_host>; |
| 153 |
shutdown-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; |
| 154 |
vbat-supply = <&vcc_3v3_s3>; |
| 155 |
vddio-supply = <&vcc_1v8_s3>; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
&usb_host0_xhci { |
| 160 |
dr_mode = "host"; |
| 161 |
}; |
| 162 |
|
| 163 |
/* pcie eth. not a real regulator. 33VAUX */ |
| 164 |
&vcc3v3_pcie_eth { |
| 165 |
/* Ethernet_power_en */ |
| 166 |
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; |
| 167 |
}; |
| 168 |
|
| 169 |
/* |
| 170 |
* Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic, |
| 171 |
* both regulators share the same enable gpio |
| 172 |
*/ |
| 173 |
&vcc5v0_usb20 { |
| 174 |
/* USB_HOST_PWREN */ |
| 175 |
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; |
| 176 |
pinctrl-names = "default"; |
| 177 |
pinctrl-0 = <&usb_host_pwren>; |
| 178 |
}; |