| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
#include "rk3588-fet3588-c.dtsi" |
| 5 |
|
| 6 |
/ { |
| 7 |
model = "Forlinx OK3588-C Board"; |
| 8 |
compatible = "forlinx,ok3588-c", "forlinx,fet3588-c", "rockchip,rk3588"; |
| 9 |
|
| 10 |
aliases { |
| 11 |
ethernet0 = &gmac0; |
| 12 |
ethernet1 = &gmac1; |
| 13 |
mmc1 = &sdmmc; |
| 14 |
}; |
| 15 |
|
| 16 |
adc-keys-0 { |
| 17 |
compatible = "adc-keys"; |
| 18 |
io-channels = <&saradc 0>; |
| 19 |
io-channel-names = "buttons"; |
| 20 |
keyup-threshold-microvolt = <1800000>; |
| 21 |
poll-interval = <100>; |
| 22 |
|
| 23 |
button-maskrom { |
| 24 |
label = "Maskrom"; |
| 25 |
linux,code = <KEY_SETUP>; |
| 26 |
press-threshold-microvolt = <400>; |
| 27 |
}; |
| 28 |
}; |
| 29 |
|
| 30 |
adc-keys-1 { |
| 31 |
compatible = "adc-keys"; |
| 32 |
io-channels = <&saradc 1>; |
| 33 |
io-channel-names = "buttons"; |
| 34 |
keyup-threshold-microvolt = <1800000>; |
| 35 |
poll-interval = <100>; |
| 36 |
|
| 37 |
button-volume-up { |
| 38 |
label = "V+/Recovery"; |
| 39 |
linux,code = <KEY_VOLUMEUP>; |
| 40 |
press-threshold-microvolt = <17000>; |
| 41 |
}; |
| 42 |
|
| 43 |
button-volume-down { |
| 44 |
label = "V-"; |
| 45 |
linux,code = <KEY_VOLUMEDOWN>; |
| 46 |
press-threshold-microvolt = <417000>; |
| 47 |
}; |
| 48 |
|
| 49 |
button-menu { |
| 50 |
label = "Menu"; |
| 51 |
linux,code = <KEY_MENU>; |
| 52 |
press-threshold-microvolt = <890000>; |
| 53 |
}; |
| 54 |
|
| 55 |
button-escape { |
| 56 |
label = "ESC"; |
| 57 |
linux,code = <KEY_ESC>; |
| 58 |
press-threshold-microvolt = <1235000>; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
fan: pwm-fan { |
| 63 |
compatible = "pwm-fan"; |
| 64 |
cooling-levels = <0 95 145 195 255>; |
| 65 |
fan-supply = <&vcc12v_dcin>; |
| 66 |
pwms = <&pwm2 0 50000 0>; |
| 67 |
#cooling-cells = <2>; |
| 68 |
}; |
| 69 |
|
| 70 |
sound { |
| 71 |
compatible = "simple-audio-card"; |
| 72 |
pinctrl-names = "default"; |
| 73 |
pinctrl-0 = <&hp_detect>; |
| 74 |
simple-audio-card,name = "RK3588 OK3588-C Audio"; |
| 75 |
simple-audio-card,bitclock-master = <&masterdai>; |
| 76 |
simple-audio-card,format = "i2s"; |
| 77 |
simple-audio-card,frame-master = <&masterdai>; |
| 78 |
simple-audio-card,hp-det-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; |
| 79 |
simple-audio-card,mclk-fs = <256>; |
| 80 |
simple-audio-card,pin-switches = "Headphones", "Speaker"; |
| 81 |
simple-audio-card,widgets = |
| 82 |
"Headphones", "Headphones", |
| 83 |
"Speaker", "Speaker", |
| 84 |
"Microphone", "Internal Microphone", |
| 85 |
"Microphone", "Headset Microphone"; |
| 86 |
simple-audio-card,routing = |
| 87 |
"Headphones", "LHP", |
| 88 |
"Headphones", "RHP", |
| 89 |
"Speaker", "LSPK", |
| 90 |
"Speaker", "RSPK", |
| 91 |
"LMICP", "Headset Microphone", |
| 92 |
"RMICP", "Internal Microphone"; |
| 93 |
|
| 94 |
simple-audio-card,cpu { |
| 95 |
sound-dai = <&i2s0_8ch>; |
| 96 |
}; |
| 97 |
|
| 98 |
masterdai: simple-audio-card,codec { |
| 99 |
sound-dai = <&nau8822>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
vcc12v_dcin: regulator-vcc12v-dcin { |
| 104 |
compatible = "regulator-fixed"; |
| 105 |
regulator-name = "vcc12v_dcin"; |
| 106 |
regulator-always-on; |
| 107 |
regulator-boot-on; |
| 108 |
regulator-min-microvolt = <12000000>; |
| 109 |
regulator-max-microvolt = <12000000>; |
| 110 |
}; |
| 111 |
|
| 112 |
vcc1v8_sys: regulator-vcc1v8-sys { |
| 113 |
compatible = "regulator-fixed"; |
| 114 |
regulator-name = "vcc1v8_sys"; |
| 115 |
regulator-always-on; |
| 116 |
regulator-boot-on; |
| 117 |
regulator-min-microvolt = <1800000>; |
| 118 |
regulator-max-microvolt = <1800000>; |
| 119 |
vin-supply = <&vcc3v3_sys>; |
| 120 |
}; |
| 121 |
|
| 122 |
vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 { |
| 123 |
compatible = "regulator-fixed"; |
| 124 |
regulator-name = "vcc3v3_pcie2x1l0"; |
| 125 |
regulator-min-microvolt = <3300000>; |
| 126 |
regulator-max-microvolt = <3300000>; |
| 127 |
startup-delay-us = <50000>; |
| 128 |
vin-supply = <&vcc5v0_sys>; |
| 129 |
}; |
| 130 |
|
| 131 |
vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 { |
| 132 |
compatible = "regulator-fixed"; |
| 133 |
regulator-name = "vcc3v3_pcie2x1l2"; |
| 134 |
regulator-min-microvolt = <3300000>; |
| 135 |
regulator-max-microvolt = <3300000>; |
| 136 |
startup-delay-us = <5000>; |
| 137 |
vin-supply = <&vcc5v0_sys>; |
| 138 |
}; |
| 139 |
|
| 140 |
vcc3v3_pcie30: regulator-vcc3v3_pcie30 { |
| 141 |
compatible = "regulator-fixed"; |
| 142 |
regulator-name = "vcc3v3_pcie30"; |
| 143 |
regulator-always-on; |
| 144 |
regulator-boot-on; |
| 145 |
regulator-min-microvolt = <3300000>; |
| 146 |
regulator-max-microvolt = <3300000>; |
| 147 |
vin-supply = <&vcc5v0_sys>; |
| 148 |
}; |
| 149 |
|
| 150 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 151 |
compatible = "regulator-fixed"; |
| 152 |
regulator-name = "vcc3v3_sys"; |
| 153 |
regulator-always-on; |
| 154 |
regulator-boot-on; |
| 155 |
regulator-min-microvolt = <3300000>; |
| 156 |
regulator-max-microvolt = <3300000>; |
| 157 |
vin-supply = <&vcc5v0_sys>; |
| 158 |
}; |
| 159 |
|
| 160 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 161 |
compatible = "regulator-fixed"; |
| 162 |
regulator-name = "vcc5v0_sys"; |
| 163 |
regulator-always-on; |
| 164 |
regulator-boot-on; |
| 165 |
regulator-min-microvolt = <5000000>; |
| 166 |
regulator-max-microvolt = <5000000>; |
| 167 |
vin-supply = <&vcc12v_dcin>; |
| 168 |
}; |
| 169 |
}; |
| 170 |
|
| 171 |
&gmac0 { |
| 172 |
clock_in_out = "output"; |
| 173 |
phy-handle = <&rgmii_phy0>; |
| 174 |
phy-mode = "rgmii-rxid"; |
| 175 |
pinctrl-names = "default"; |
| 176 |
pinctrl-0 = <&gmac0_miim |
| 177 |
&gmac0_tx_bus2 |
| 178 |
&gmac0_rx_bus2 |
| 179 |
&gmac0_rgmii_clk |
| 180 |
&gmac0_rgmii_bus>; |
| 181 |
tx_delay = <0x44>; |
| 182 |
rx_delay = <0x00>; |
| 183 |
status = "okay"; |
| 184 |
}; |
| 185 |
|
| 186 |
&gmac1 { |
| 187 |
clock_in_out = "output"; |
| 188 |
phy-handle = <&rgmii_phy1>; |
| 189 |
phy-mode = "rgmii-rxid"; |
| 190 |
pinctrl-names = "default"; |
| 191 |
pinctrl-0 = <&gmac1_miim |
| 192 |
&gmac1_tx_bus2 |
| 193 |
&gmac1_rx_bus2 |
| 194 |
&gmac1_rgmii_clk |
| 195 |
&gmac1_rgmii_bus>; |
| 196 |
tx_delay = <0x44>; |
| 197 |
rx_delay = <0x00>; |
| 198 |
status = "okay"; |
| 199 |
}; |
| 200 |
|
| 201 |
&gpu { |
| 202 |
mali-supply = <&vdd_gpu_s0>; |
| 203 |
status = "okay"; |
| 204 |
}; |
| 205 |
|
| 206 |
&i2c2 { |
| 207 |
status = "okay"; |
| 208 |
|
| 209 |
tca6424a: gpio@23 { |
| 210 |
compatible = "ti,tca6424"; |
| 211 |
reg = <0x23>; |
| 212 |
gpio-controller; |
| 213 |
#gpio-cells = <2>; |
| 214 |
|
| 215 |
interrupt-parent = <&gpio1>; |
| 216 |
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; |
| 217 |
interrupt-controller; |
| 218 |
#interrupt-cells = <2>; |
| 219 |
|
| 220 |
pinctrl-names = "default"; |
| 221 |
pinctrl-0 = <&tca6424a_int>; |
| 222 |
vcc-supply = <&vcc3v3_sys>; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
&i2c5 { |
| 227 |
status = "okay"; |
| 228 |
pinctrl-names = "default"; |
| 229 |
pinctrl-0 = <&i2c5m2_xfer>; |
| 230 |
|
| 231 |
pcf8563: rtc@51 { |
| 232 |
compatible = "nxp,pcf8563"; |
| 233 |
reg = <0x51>; |
| 234 |
}; |
| 235 |
}; |
| 236 |
|
| 237 |
&i2c7 { |
| 238 |
status = "okay"; |
| 239 |
|
| 240 |
nau8822: audio-codec@1a { |
| 241 |
compatible = "nuvoton,nau8822"; |
| 242 |
reg = <0x1a>; |
| 243 |
clocks = <&cru I2S0_8CH_MCLKOUT>; |
| 244 |
clock-names = "mclk"; |
| 245 |
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; |
| 246 |
assigned-clock-rates = <12288000>; |
| 247 |
#sound-dai-cells = <0>; |
| 248 |
}; |
| 249 |
}; |
| 250 |
|
| 251 |
&i2s0_8ch { |
| 252 |
pinctrl-names = "default"; |
| 253 |
pinctrl-0 = <&i2s0_lrck |
| 254 |
&i2s0_mclk |
| 255 |
&i2s0_sclk |
| 256 |
&i2s0_sdi0 |
| 257 |
&i2s0_sdo0>; |
| 258 |
status = "okay"; |
| 259 |
}; |
| 260 |
|
| 261 |
&mdio0 { |
| 262 |
rgmii_phy0: ethernet-phy@1 { |
| 263 |
/* RTL8211F */ |
| 264 |
compatible = "ethernet-phy-id001c.c916"; |
| 265 |
reg = <0x1>; |
| 266 |
pinctrl-names = "default"; |
| 267 |
pinctrl-0 = <&rtl8211f_0_rst>; |
| 268 |
reset-assert-us = <20000>; |
| 269 |
reset-deassert-us = <100000>; |
| 270 |
reset-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>; |
| 271 |
}; |
| 272 |
}; |
| 273 |
|
| 274 |
&mdio1 { |
| 275 |
rgmii_phy1: ethernet-phy@2 { |
| 276 |
/* RTL8211F */ |
| 277 |
compatible = "ethernet-phy-id001c.c916"; |
| 278 |
reg = <0x2>; |
| 279 |
pinctrl-names = "default"; |
| 280 |
pinctrl-0 = <&rtl8211f_1_rst>; |
| 281 |
reset-assert-us = <20000>; |
| 282 |
reset-deassert-us = <100000>; |
| 283 |
reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; |
| 284 |
}; |
| 285 |
}; |
| 286 |
|
| 287 |
&pcie2x1l0 { |
| 288 |
pinctrl-names = "default"; |
| 289 |
pinctrl-0 = <&pcie2_0_rst>; |
| 290 |
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 291 |
vpcie3v3-supply = <&vcc3v3_pcie2x1l0>; |
| 292 |
status = "okay"; |
| 293 |
}; |
| 294 |
|
| 295 |
&pcie2x1l2 { |
| 296 |
pinctrl-names = "default"; |
| 297 |
pinctrl-0 = <&pcie2_2_rst>; |
| 298 |
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; |
| 299 |
vpcie3v3-supply = <&vcc3v3_pcie2x1l2>; |
| 300 |
status = "okay"; |
| 301 |
}; |
| 302 |
|
| 303 |
&pcie30phy { |
| 304 |
status = "okay"; |
| 305 |
}; |
| 306 |
|
| 307 |
&pcie3x4 { |
| 308 |
pinctrl-names = "default"; |
| 309 |
pinctrl-0 = <&pcie3_rst>; |
| 310 |
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; |
| 311 |
vpcie3v3-supply = <&vcc3v3_pcie30>; |
| 312 |
status = "okay"; |
| 313 |
}; |
| 314 |
|
| 315 |
&pd_gpu { |
| 316 |
domain-supply = <&vdd_gpu_s0>; |
| 317 |
}; |
| 318 |
|
| 319 |
&pinctrl { |
| 320 |
pcie2 { |
| 321 |
pcie2_0_rst: pcie2-0-rst { |
| 322 |
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 323 |
}; |
| 324 |
|
| 325 |
pcie2_2_rst: pcie2-2-rst { |
| 326 |
rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 327 |
}; |
| 328 |
}; |
| 329 |
|
| 330 |
pcie3 { |
| 331 |
pcie3_rst: pcie3-rst { |
| 332 |
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 333 |
}; |
| 334 |
}; |
| 335 |
|
| 336 |
rtl8211f { |
| 337 |
rtl8211f_0_rst: rtl8211f-0-rst { |
| 338 |
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 339 |
}; |
| 340 |
rtl8211f_1_rst: rtl8211f-1-rst { |
| 341 |
rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 342 |
}; |
| 343 |
}; |
| 344 |
|
| 345 |
sound { |
| 346 |
hp_detect: hp-detect { |
| 347 |
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 348 |
}; |
| 349 |
}; |
| 350 |
|
| 351 |
tca6424a { |
| 352 |
tca6424a_int: tca6424a-int { |
| 353 |
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 354 |
}; |
| 355 |
}; |
| 356 |
}; |
| 357 |
|
| 358 |
&pwm2 { |
| 359 |
status = "okay"; |
| 360 |
}; |
| 361 |
|
| 362 |
&saradc { |
| 363 |
vref-supply = <&avcc_1v8_s0>; |
| 364 |
status = "okay"; |
| 365 |
}; |
| 366 |
|
| 367 |
&sdmmc { |
| 368 |
bus-width = <4>; |
| 369 |
cap-mmc-highspeed; |
| 370 |
cap-sd-highspeed; |
| 371 |
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 372 |
disable-wp; |
| 373 |
max-frequency = <150000000>; |
| 374 |
no-sdio; |
| 375 |
no-mmc; |
| 376 |
sd-uhs-sdr104; |
| 377 |
vqmmc-supply = <&vccio_sd_s0>; |
| 378 |
status = "okay"; |
| 379 |
}; |
| 380 |
|
| 381 |
&tsadc { |
| 382 |
status = "okay"; |
| 383 |
}; |
| 384 |
|
| 385 |
&u2phy2 { |
| 386 |
status = "okay"; |
| 387 |
}; |
| 388 |
|
| 389 |
&u2phy2_host { |
| 390 |
status = "okay"; |
| 391 |
}; |
| 392 |
|
| 393 |
&u2phy3 { |
| 394 |
status = "okay"; |
| 395 |
}; |
| 396 |
|
| 397 |
&u2phy3_host { |
| 398 |
status = "okay"; |
| 399 |
}; |
| 400 |
|
| 401 |
&usb_host0_ehci { |
| 402 |
status = "okay"; |
| 403 |
}; |
| 404 |
|
| 405 |
&usb_host0_ohci { |
| 406 |
status = "okay"; |
| 407 |
}; |
| 408 |
|
| 409 |
&usb_host1_ehci { |
| 410 |
status = "okay"; |
| 411 |
}; |
| 412 |
|
| 413 |
&usb_host1_ohci { |
| 414 |
status = "okay"; |
| 415 |
}; |