Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3588-mnt-reform2.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
4 * Copyright (c) 2024 MNT Research GmbH
5 */
6
7 /dts-v1/;
8
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/pinctrl/rockchip.h>
12 #include <dt-bindings/soc/rockchip,vop2.h>
13 #include <dt-bindings/usb/pd.h>
14
15 #include "rk3588-firefly-icore-3588q.dtsi"
16
17 / {
18 model = "MNT Reform 2 with RCORE RK3588 Module";
19 compatible = "mntre,reform2-rcore", "firefly,icore-3588q", "rockchip,rk3588";
20 chassis-type = "laptop";
21
22 aliases {
23 ethernet0 = &gmac0;
24 mmc1 = &sdmmc;
25 };
26
27 chosen {
28 stdout-path = "serial2:1500000n8";
29 };
30
31 backlight: backlight {
32 compatible = "pwm-backlight";
33 brightness-levels = <0 8 16 32 64 128 160 200 255>;
34 default-brightness-level = <128>;
35 enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
36 pwms = <&pwm8 0 10000 0>;
37 };
38
39 gmac0_clkin: external-gmac0-clock {
40 compatible = "fixed-clock";
41 #clock-cells = <0>;
42 clock-frequency = <125000000>;
43 clock-output-names = "gmac0_clkin";
44 };
45
46 pcie30_avdd1v8: regulator-pcie30-avdd1v8 {
47 compatible = "regulator-fixed";
48 regulator-boot-on;
49 regulator-always-on;
50 regulator-min-microvolt = <1800000>;
51 regulator-max-microvolt = <1800000>;
52 regulator-name = "pcie30_avdd1v8";
53 vin-supply = <&avcc_1v8_s0>;
54 };
55
56 pcie30_avdd0v75: regulator-pcie30-avdd0v75 {
57 compatible = "regulator-fixed";
58 regulator-always-on;
59 regulator-boot-on;
60 regulator-min-microvolt = <750000>;
61 regulator-max-microvolt = <750000>;
62 regulator-name = "pcie30_avdd0v75";
63 vin-supply = <&avdd_0v75_s0>;
64 };
65
66 vcc12v_dcin: regulator-vcc12v-dcin {
67 compatible = "regulator-fixed";
68 regulator-always-on;
69 regulator-boot-on;
70 regulator-min-microvolt = <12000000>;
71 regulator-max-microvolt = <12000000>;
72 regulator-name = "vcc12v_dcin";
73 };
74
75 vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
76 compatible = "regulator-fixed";
77 regulator-name = "vcc_1v1_nldo_s3";
78 regulator-always-on;
79 regulator-boot-on;
80 regulator-min-microvolt = <1100000>;
81 regulator-max-microvolt = <1100000>;
82 vin-supply = <&vcc5v0_sys>;
83 };
84
85 vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
86 compatible = "regulator-fixed";
87 regulator-always-on;
88 regulator-boot-on;
89 regulator-min-microvolt = <3300000>;
90 regulator-max-microvolt = <3300000>;
91 regulator-name = "vcc3v3_pcie30";
92 vin-supply = <&vcc12v_dcin>;
93 };
94
95 vcc5v0_host: regulator-vcc5v0-host {
96 compatible = "regulator-fixed";
97 regulator-always-on;
98 regulator-boot-on;
99 regulator-min-microvolt = <5000000>;
100 regulator-max-microvolt = <5000000>;
101 regulator-name = "vcc5v0_host";
102 };
103
104 vcc5v0_sys: regulator-vcc5v0-sys {
105 compatible = "regulator-fixed";
106 regulator-always-on;
107 regulator-boot-on;
108 regulator-min-microvolt = <5000000>;
109 regulator-max-microvolt = <5000000>;
110 regulator-name = "vcc5v0_sys";
111 vin-supply = <&vcc12v_dcin>;
112 };
113
114 vcc5v0_usb: regulator-vcc5v0-usb {
115 compatible = "regulator-fixed";
116 regulator-always-on;
117 regulator-boot-on;
118 regulator-min-microvolt = <5000000>;
119 regulator-max-microvolt = <5000000>;
120 regulator-name = "vcc5v0_usb";
121 vin-supply = <&vcc12v_dcin>;
122 };
123 };
124
125 &combphy0_ps {
126 status = "okay";
127 };
128
129 &gmac0 {
130 clock_in_out = "output";
131 phy-handle = <&rgmii_phy>;
132 phy-mode = "rgmii-id";
133 pinctrl-names = "default";
134 pinctrl-0 = <&gmac0_miim
135 &gmac0_tx_bus2
136 &gmac0_rx_bus2
137 &gmac0_rgmii_clk
138 &gmac0_rgmii_bus
139 &gmac0_clkinout
140 &eth_phy_reset>;
141 status = "okay";
142 };
143
144 &gpu {
145 mali-supply = <&vdd_gpu_s0>;
146 sram-supply = <&vdd_gpu_mem_s0>;
147 status = "okay";
148 };
149
150 &hdmi0 {
151 status = "okay";
152 };
153
154 &hdmi0_in {
155 hdmi0_in_vp2: endpoint {
156 remote-endpoint = <&vp2_out_hdmi0>;
157 };
158 };
159
160 &hdptxphy0 {
161 status = "okay";
162 };
163
164 &i2c6 {
165 pinctrl-names = "default";
166 pinctrl-0 = <&i2c6m0_xfer>;
167 status = "okay";
168
169 rtc@68 {
170 compatible = "nxp,pcf8523";
171 reg = <0x68>;
172 };
173 };
174
175 &mdio0 {
176 rgmii_phy: ethernet-phy@0 {
177 compatible = "ethernet-phy-ieee802.3-c22";
178 reg = <0x0>;
179 };
180 };
181
182 &pcie2x1l2 {
183 pinctrl-0 = <&pcie2_0_rst>;
184 reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
185 status = "okay";
186 };
187
188 &pcie30phy {
189 status = "okay";
190 };
191
192 &pcie3x4 {
193 num-lanes = <1>;
194 pinctrl-names = "default";
195 pinctrl-0 = <&pcie3_reset>;
196 reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
197 vpcie3v3-supply = <&vcc3v3_pcie30>;
198 status = "okay";
199 };
200
201 &pinctrl {
202 dp {
203 dp1_hpd: dp1-hpd {
204 rockchip,pins = <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
205 };
206 };
207
208 pcie2 {
209 pcie2_0_rst: pcie2-0-rst {
210 rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
211 };
212 };
213
214 pcie3 {
215 pcie3_reset: pcie3-reset {
216 rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
217 };
218 };
219
220 eth_phy {
221 eth_phy_reset: eth-phy-reset {
222 rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
223 };
224 };
225 };
226
227 &pwm8 {
228 pinctrl-0 = <&pwm8m2_pins>;
229 status = "okay";
230 };
231
232 &saradc {
233 vref-supply = <&avcc_1v8_s0>;
234 status = "okay";
235 };
236
237 &sdmmc {
238 bus-width = <4>;
239 cap-sd-highspeed;
240 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
241 disable-wp;
242 max-frequency = <40000000>;
243 no-1-8-v;
244 no-mmc;
245 no-sdio;
246 vmmc-supply = <&vcc3v3_pcie30>;
247 vqmmc-supply = <&vcc3v3_pcie30>;
248 status = "okay";
249 };
250
251 &tsadc {
252 status = "okay";
253 };
254
255 &u2phy0 {
256 status = "okay";
257 };
258
259 &u2phy0_otg {
260 status = "okay";
261 };
262
263 &u2phy1 {
264 status = "okay";
265 };
266
267 &u2phy1_otg {
268 status = "okay";
269 };
270
271 &u2phy2 {
272 status = "okay";
273 };
274
275 &u2phy2_host {
276 phy-supply = <&vcc5v0_host>;
277 status = "okay";
278 };
279
280 &u2phy3 {
281 status = "okay";
282 };
283
284 &u2phy3_host {
285 phy-supply = <&vcc5v0_host>;
286 status = "okay";
287 };
288
289 &usbdp_phy0 {
290 status = "okay";
291 };
292
293 &usbdp_phy1 {
294 status = "okay";
295 };
296
297 &usb_host0_ehci {
298 status = "okay";
299 };
300
301 &usb_host0_ohci {
302 status = "okay";
303 };
304
305 &usb_host0_xhci {
306 dr_mode = "host";
307 status = "okay";
308 };
309
310 &usb_host1_ehci {
311 status = "okay";
312 };
313
314 &usb_host1_ohci {
315 status = "okay";
316 };
317
318 &usb_host1_xhci {
319 dr_mode = "host";
320 status = "okay";
321 };
322
323 &vop {
324 status = "okay";
325 };
326
327 &vop_mmu {
328 status = "okay";
329 };
330
331 &vp2 {
332 vp2_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
333 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
334 remote-endpoint = <&hdmi0_in_vp2>;
335 };
336 };