Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3588-friendlyelec-cm3588-nas.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
4 * Copyright (c) 2023 Thomas McKahan
5 * Copyright (c) 2024 Sebastian Kropatsch
6 *
7 */
8
9 /dts-v1/;
10
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/pinctrl/rockchip.h>
14 #include <dt-bindings/soc/rockchip,vop2.h>
15 #include <dt-bindings/usb/pd.h>
16 #include "rk3588-friendlyelec-cm3588.dtsi"
17
18 / {
19 model = "FriendlyElec CM3588 NAS";
20 compatible = "friendlyarm,cm3588-nas", "friendlyarm,cm3588", "rockchip,rk3588";
21
22 adc_key_recovery: adc-key-recovery {
23 compatible = "adc-keys";
24 io-channels = <&saradc 1>;
25 io-channel-names = "buttons";
26 keyup-threshold-microvolt = <1800000>;
27 poll-interval = <100>;
28
29 button-recovery {
30 label = "Recovery";
31 linux,code = <KEY_VENDOR>;
32 press-threshold-microvolt = <17000>;
33 };
34 };
35
36 analog-sound {
37 compatible = "simple-audio-card";
38 pinctrl-names = "default";
39 pinctrl-0 = <&headphone_detect>;
40
41 simple-audio-card,format = "i2s";
42 simple-audio-card,hp-det-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
43 simple-audio-card,mclk-fs = <256>;
44 simple-audio-card,name = "realtek,rt5616-codec";
45
46 simple-audio-card,routing =
47 "Headphones", "HPOL",
48 "Headphones", "HPOR",
49 "MIC1", "Microphone Jack",
50 "Microphone Jack", "micbias1";
51 simple-audio-card,widgets =
52 "Headphone", "Headphones",
53 "Microphone", "Microphone Jack";
54
55 simple-audio-card,cpu {
56 sound-dai = <&i2s0_8ch>;
57 };
58
59 simple-audio-card,codec {
60 sound-dai = <&rt5616>;
61 };
62 };
63
64 buzzer: pwm-beeper {
65 compatible = "pwm-beeper";
66 amp-supply = <&vcc_5v0_sys>;
67 beeper-hz = <500>;
68 pwms = <&pwm8 0 500000 0>;
69 };
70
71 fan: pwm-fan {
72 compatible = "pwm-fan";
73 #cooling-cells = <2>;
74 cooling-levels = <0 50 80 120 160 220>;
75 fan-supply = <&vcc_5v0_sys>;
76 pwms = <&pwm1 0 50000 0>;
77 };
78
79 gpio_keys: gpio-keys {
80 compatible = "gpio-keys";
81 pinctrl-names = "default";
82 pinctrl-0 = <&key1_pin>;
83
84 button-user {
85 debounce-interval = <50>;
86 gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
87 label = "User Button";
88 linux,code = <BTN_1>;
89 wakeup-source;
90 };
91 };
92
93 hdmi0-con {
94 compatible = "hdmi-connector";
95 type = "a";
96
97 port {
98 hdmi0_con_in: endpoint {
99 remote-endpoint = <&hdmi0_out_con>;
100 };
101 };
102 };
103
104 hdmi1-con {
105 compatible = "hdmi-connector";
106 type = "a";
107
108 port {
109 hdmi1_con_in: endpoint {
110 remote-endpoint = <&hdmi1_out_con>;
111 };
112 };
113 };
114
115 ir-receiver {
116 compatible = "gpio-ir-receiver";
117 gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
118 };
119
120 vcc_12v_dcin: regulator-vcc-12v-dcin {
121 compatible = "regulator-fixed";
122 regulator-name = "vcc_12v_dcin";
123 regulator-always-on;
124 regulator-boot-on;
125 regulator-min-microvolt = <12000000>;
126 regulator-max-microvolt = <12000000>;
127 };
128
129 vcc_3v3_m2_a: regulator-vcc-3v3-m2-a {
130 compatible = "regulator-fixed";
131 regulator-name = "vcc_3v3_m2_a";
132 regulator-always-on;
133 regulator-boot-on;
134 regulator-min-microvolt = <3300000>;
135 regulator-max-microvolt = <3300000>;
136 vin-supply = <&vcc_12v_dcin>;
137 };
138
139 vcc_3v3_m2_b: regulator-vcc-3v3-m2-b {
140 compatible = "regulator-fixed";
141 regulator-name = "vcc_3v3_m2_b";
142 regulator-always-on;
143 regulator-boot-on;
144 regulator-min-microvolt = <3300000>;
145 regulator-max-microvolt = <3300000>;
146 vin-supply = <&vcc_12v_dcin>;
147 };
148
149 vcc_3v3_m2_c: regulator-vcc-3v3-m2-c {
150 compatible = "regulator-fixed";
151 regulator-name = "vcc_3v3_m2_c";
152 regulator-always-on;
153 regulator-boot-on;
154 regulator-min-microvolt = <3300000>;
155 regulator-max-microvolt = <3300000>;
156 vin-supply = <&vcc_12v_dcin>;
157 };
158
159 vcc_3v3_m2_d: regulator-vcc-3v3-m2-d {
160 compatible = "regulator-fixed";
161 regulator-name = "vcc_3v3_m2_d";
162 regulator-always-on;
163 regulator-boot-on;
164 regulator-min-microvolt = <3300000>;
165 regulator-max-microvolt = <3300000>;
166 vin-supply = <&vcc_12v_dcin>;
167 };
168
169 /* vcc_5v0_sys powers the peripherals */
170 vcc_5v0_sys: regulator-vcc-5v0-sys {
171 compatible = "regulator-fixed";
172 regulator-name = "vcc_5v0_sys";
173 regulator-always-on;
174 regulator-boot-on;
175 regulator-min-microvolt = <5000000>;
176 regulator-max-microvolt = <5000000>;
177 vin-supply = <&vcc_12v_dcin>;
178 };
179
180 /* SY6280AAC power switch (U14 in schematics) */
181 vcc_5v0_host_20: regulator-vcc-5v0-host-20 {
182 compatible = "regulator-fixed";
183 enable-active-high;
184 gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
185 pinctrl-names = "default";
186 pinctrl-0 = <&vcc_5v0_host20_en>;
187 regulator-name = "vcc_5v0_host_20";
188 regulator-min-microvolt = <5000000>;
189 regulator-max-microvolt = <5000000>;
190 vin-supply = <&vcc_5v0_sys>;
191 };
192
193 /* SY6280AAC power switch (U8 in schematics) */
194 vcc_5v0_host_30_p1: regulator-vcc-5v0-host-30-p1 {
195 compatible = "regulator-fixed";
196 enable-active-high;
197 gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
198 pinctrl-names = "default";
199 pinctrl-0 = <&vcc_5v0_host30p1_en>;
200 regulator-name = "vcc_5v0_host_30_p1";
201 regulator-min-microvolt = <5000000>;
202 regulator-max-microvolt = <5000000>;
203 vin-supply = <&vcc_5v0_sys>;
204 };
205
206 /* SY6280AAC power switch (U9 in schematics) */
207 vcc_5v0_host_30_p2: regulator-vcc-5v0-host-30-p2 {
208 compatible = "regulator-fixed";
209 enable-active-high;
210 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
211 pinctrl-names = "default";
212 pinctrl-0 = <&vcc_5v0_host30p2_en>;
213 regulator-name = "vcc_5v0_host_30_p2";
214 regulator-min-microvolt = <5000000>;
215 regulator-max-microvolt = <5000000>;
216 vin-supply = <&vcc_5v0_sys>;
217 };
218
219 /* SY6280AAC power switch (U10 in schematics) */
220 vbus_5v0_typec: regulator-vbus-5v0-typec {
221 compatible = "regulator-fixed";
222 enable-active-high;
223 gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
224 pinctrl-names = "default";
225 pinctrl-0 = <&typec_5v_pwr_en>;
226 regulator-name = "vbus_5v0_typec";
227 regulator-min-microvolt = <5000000>;
228 regulator-max-microvolt = <5000000>;
229 vin-supply = <&vcc_5v0_sys>;
230 };
231 };
232
233 /* vcc_4v0_sys powers the RK806 and RK860's */
234 &vcc_4v0_sys {
235 vin-supply = <&vcc_12v_dcin>;
236 };
237
238 /* Combo PHY 1 is configured to act as as PCIe 2.0 PHY */
239 /* Used by PCIe controller 2 (pcie2x1l0) */
240 &combphy1_ps {
241 status = "okay";
242 };
243
244 /* Combo PHY 2 is configured to act as USB3 PHY */
245 /* Used by USB 3.0 OTG 2 controller (USB 3.0 Type-A port 2) */
246 /* CM3588 USB Controller Config Table: USB30 HOST2 */
247 &combphy2_psu {
248 status = "okay";
249 };
250
251 /* GPIO names are in the format "Human-readable-name [SIGNAL_LABEL]" */
252 /* Signal labels match the official CM3588 NAS SDK schematic revision 2309 */
253 &gpio0 {
254 gpio-line-names =
255 /* GPIO0 A0-A7 */
256 "", "", "", "",
257 "MicroSD detect [SDMMC_DET_L]", "", "", "",
258 /* GPIO0 B0-B7 */
259 "", "", "", "",
260 "", "", "", "",
261 /* GPIO0 C0-C7 */
262 "", "", "", "",
263 "Pin 10 [UART0_RX_M0]", "Pin 08 [UART0_TX_M0/PWM4_M0]", "Pin 32 [PWM5_M1]", "",
264 /* GPIO0 D0-D7 */
265 "", "", "", "USB3 Type-C [CC_INT_L]",
266 "IR receiver [PWM3_IR_M0]", "User Button", "", "";
267 };
268
269 &gpio1 {
270 gpio-line-names =
271 /* GPIO1 A0-A7 */
272 "Pin 27 [UART6_RX_M1]", "Pin 28 [UART6_TX_M1]", "", "",
273 "USB2 Type-A [USB2_PWREN]", "", "", "Pin 15",
274 /* GPIO1 B0-B7 */
275 "Pin 26", "Pin 21 [SPI0_MISO_M2]", "Pin 19 [SPI0_MOSI_M2/UART4_RX_M2]", "Pin 23 [SPI0_CLK_M2/UART4_TX_M2]",
276 "Pin 24 [SPI0_CS0_M2/UART7_RX_M2]", "Pin 22 [SPI0_CS1_M0/UART7_TX_M2]", "", "CSI-Pin 14 [MIPI_CAM2_CLKOUT]",
277 /* GPIO1 C0-C7 */
278 "", "", "", "",
279 "Headphone detect [HP_DET_L]", "", "", "",
280 /* GPIO1 D0-D7 */
281 "", "", "USB3 Type-C [TYPEC5V_PWREN_H]", "5V Fan [PWM1_M1]",
282 "", "HDMI-in detect [HDMIIRX_DET_L]", "Pin 05 [I2C8_SCL_M2]", "Pin 03 [I2C8_SDA_M2]";
283 };
284
285 &gpio2 {
286 gpio-line-names =
287 /* GPIO2 A0-A7 */
288 "", "", "", "",
289 "", "", "SPI NOR Flash [FSPI_D0_M1]", "SPI NOR Flash [FSPI_D1_M1]",
290 /* GPIO2 B0-B7 */
291 "SPI NOR Flash [FSPI_D2_M1]", "SPI NOR Flash [FSPI_D3_M1]", "", "SPI NOR Flash [FSPI_CLK_M1]",
292 "SPI NOR Flash [FSPI_CSN0_M1]", "", "", "",
293 /* GPIO2 C0-C7 */
294 "", "CSI-Pin 11 [MIPI_CAM2_RESET_L]", "CSI-Pin 12 [MIPI_CAM2_PDN_L]", "",
295 "", "", "", "",
296 /* GPIO2 D0-D7 */
297 "", "", "", "",
298 "", "", "", "";
299 };
300
301 &gpio3 {
302 gpio-line-names =
303 /* GPIO3 A0-A7 */
304 "Pin 35 [SPI4_MISO_M1/PWM10_M0]", "Pin 38 [SPI4_MOSI_M1]", "Pin 40 [SPI4_CLK_M1/UART8_TX_M1]", "Pin 36 [SPI4_CS0_M1/UART8_RX_M1]",
305 "Pin 37 [SPI4_CS1_M1]", "USB3-A #2 [USB3_2_PWREN]", "DSI-Pin 12 [LCD_RST]", "Buzzer [PWM8_M0]",
306 /* GPIO3 B0-B7 */
307 "Pin 33 [PWM9_M0]", "DSI-Pin 10 [PWM2_M1/LCD_BL]", "Pin 07", "Pin 16",
308 "Pin 18", "Pin 29 [UART3_TX_M1/PWM12_M0]", "Pin 31 [UART3_RX_M1/PWM13_M0]", "Pin 12",
309 /* GPIO3 C0-C7 */
310 "DSI-Pin 08 [TP_INT_L]", "DSI-Pin 14 [TP_RST_L]", "Pin 11 [PWM14_M0]", "Pin 13 [PWM15_IR_M0]",
311 "", "", "", "DSI-Pin 06 [I2C5_SCL_M0_TP]",
312 /* GPIO3 D0-D7 */
313 "DSI-Pin 05 [I2C5_SDA_M0_TP]", "", "", "",
314 "", "", "", "";
315 };
316
317 &gpio4 {
318 gpio-line-names =
319 /* GPIO4 A0-A7 */
320 "", "", "M.2 M-Key Slot4 [M2_D_PERST_L]", "",
321 "", "", "", "",
322 /* GPIO4 B0-B7 */
323 "USB3-A #1 [USB3_TYPEC1_PWREN]", "", "", "M.2 M-Key Slot3 [M2_C_PERST_L]",
324 "M.2 M-Key Slot2 [M2_B_PERST_L]", "M.2 M-Key Slot1 [M2_A_CLKREQ_L]", "M.2 M-Key Slot1 [M2_A_PERST_L]", "",
325 /* GPIO4 C0-C7 */
326 "", "", "", "",
327 "", "", "", "",
328 /* GPIO4 D0-D7 */
329 "", "", "", "",
330 "", "", "", "";
331 };
332
333 &hdmi0 {
334 status = "okay";
335 };
336
337 &hdmi0_in {
338 hdmi0_in_vp0: endpoint {
339 remote-endpoint = <&vp0_out_hdmi0>;
340 };
341 };
342
343 &hdmi0_out {
344 hdmi0_out_con: endpoint {
345 remote-endpoint = <&hdmi0_con_in>;
346 };
347 };
348
349 &hdmi1 {
350 status = "okay";
351 };
352
353 &hdmi1_in {
354 hdmi1_in_vp1: endpoint {
355 remote-endpoint = <&vp1_out_hdmi1>;
356 };
357 };
358
359 &hdmi1_out {
360 hdmi1_out_con: endpoint {
361 remote-endpoint = <&hdmi1_con_in>;
362 };
363 };
364
365 &hdmi_receiver_cma {
366 status = "okay";
367 };
368
369 &hdmi_receiver {
370 hpd-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
371 pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
372 pinctrl-names = "default";
373 status = "okay";
374 };
375
376 &hdptxphy0 {
377 status = "okay";
378 };
379
380 &hdptxphy1 {
381 status = "okay";
382 };
383
384 /* Connected to MIPI-DSI0 */
385 &i2c5 {
386 pinctrl-names = "default";
387 pinctrl-0 = <&i2c5m0_xfer>;
388 status = "disabled";
389 };
390
391 &i2c6 {
392 fusb302: typec-portc@22 {
393 compatible = "fcs,fusb302";
394 reg = <0x22>;
395 interrupt-parent = <&gpio0>;
396 interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
397 pinctrl-names = "default";
398 pinctrl-0 = <&usbc0_int>;
399 vbus-supply = <&vbus_5v0_typec>;
400
401 usb_con: connector {
402 compatible = "usb-c-connector";
403 data-role = "dual";
404 label = "USB-C";
405 power-role = "source";
406 source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
407 try-power-role = "source";
408 vbus-supply = <&vbus_5v0_typec>;
409
410 ports {
411 #address-cells = <1>;
412 #size-cells = <0>;
413
414 port@0 {
415 reg = <0>;
416
417 usbc0_orien_sw: endpoint {
418 remote-endpoint = <&usbdp_phy0_orientation_switch>;
419 };
420 };
421
422 port@1 {
423 reg = <1>;
424
425 usbc0_role_sw: endpoint {
426 remote-endpoint = <&dwc3_0_role_switch>;
427 };
428 };
429
430 port@2 {
431 reg = <2>;
432
433 dp_altmode_mux: endpoint {
434 remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
435 };
436 };
437 };
438 };
439 };
440 };
441
442 /* Connected to MIPI-CSI1 */
443 /* &i2c7 */
444
445 /* GPIO Connector, connected to 40-pin GPIO header */
446 &i2c8 {
447 pinctrl-names = "default";
448 pinctrl-0 = <&i2c8m2_xfer>;
449 status = "okay";
450 };
451
452 &pcie2x1l0 {
453 /* 2. M.2 socket, CON14: pcie30phy port0 lane1, @fe170000 */
454 max-link-speed = <3>;
455 num-lanes = <1>;
456 phys = <&pcie30phy>;
457 pinctrl-names = "default";
458 pinctrl-0 = <&pcie2_0_rst>;
459 reset-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
460 vpcie3v3-supply = <&vcc_3v3_m2_b>;
461 status = "okay";
462 };
463
464 &pcie2x1l1 {
465 /* 4. M.2 socket, CON16: pcie30phy port1 lane1, @fe180000 */
466 max-link-speed = <3>;
467 num-lanes = <1>;
468 phys = <&pcie30phy>;
469 pinctrl-names = "default";
470 pinctrl-0 = <&pcie2_1_rst>;
471 reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
472 vpcie3v3-supply = <&vcc_3v3_m2_d>;
473 status = "okay";
474 };
475
476 &pcie30phy {
477 /*
478 * Data lane mapping <1 3 2 4> = x1x1 x1x1 (bifurcation of both ports)
479 * port 0 lane 0 - always mapped to controller 0 (4L)
480 * port 0 lane 1 - map to controller 2 (1L0)
481 * port 1 lane 0 - map to controller 1 (2L)
482 * port 1 lane 1 - map to controller 3 (1L1)
483 */
484 data-lanes = <1 3 2 4>;
485 status = "okay";
486 };
487
488 &pcie3x4 {
489 /* 1. M.2 socket, CON13: pcie30phy port0 lane0, @fe150000 */
490 max-link-speed = <3>;
491 num-lanes = <1>;
492 pinctrl-names = "default";
493 pinctrl-0 = <&pcie3x4_rst>;
494 reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
495 vpcie3v3-supply = <&vcc_3v3_m2_a>;
496 status = "okay";
497 };
498
499 &pcie3x2 {
500 /* 3. M.2 socket, CON15: pcie30phy port1 lane0, @fe160000 */
501 max-link-speed = <3>;
502 num-lanes = <1>;
503 pinctrl-names = "default";
504 pinctrl-0 = <&pcie3x2_rst>;
505 reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
506 vpcie3v3-supply = <&vcc_3v3_m2_c>;
507 status = "okay";
508 };
509
510 &pinctrl {
511 audio {
512 headphone_detect: headphone-detect {
513 rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
514 };
515 };
516
517 gpio-key {
518 key1_pin: key1-pin {
519 rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
520 };
521 };
522
523 hdmirx {
524 hdmirx_hpd: hdmirx-5v-detection {
525 rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
526 };
527 };
528
529 pcie {
530 pcie2_0_rst: pcie2-0-rst {
531 rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
532 };
533
534 pcie2_1_rst: pcie2-1-rst {
535 rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
536 };
537
538 pcie3x2_rst: pcie3x2-rst {
539 rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
540 };
541
542 pcie3x4_rst: pcie3x4-rst {
543 rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
544 };
545 };
546
547 usb {
548 vcc_5v0_host20_en: vcc-5v0-host20-en {
549 rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
550 };
551
552 vcc_5v0_host30p1_en: vcc-5v0-host30p1-en {
553 rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
554 };
555
556 vcc_5v0_host30p2_en: vcc-5v0-host30p2-en {
557 rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
558 };
559 };
560
561 usb-typec {
562 usbc0_int: usbc0-int {
563 rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
564 };
565
566 typec_5v_pwr_en: typec-5v-pwr-en {
567 rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
568 };
569 };
570 };
571
572 /* Connected to 5V Fan */
573 &pwm1 {
574 pinctrl-names = "default";
575 pinctrl-0 = <&pwm1m1_pins>;
576 status = "okay";
577 };
578
579 /* Connected to MIPI-DSI0 */
580 &pwm2 {
581 pinctrl-names = "default";
582 pinctrl-0 = <&pwm2m1_pins>;
583 };
584
585 /* Connected to IR Receiver */
586 &pwm3 {
587 pinctrl-names = "default";
588 pinctrl-0 = <&pwm3m0_pins>;
589 status = "okay";
590 };
591
592 /* GPIO Connector, connected to 40-pin GPIO header */
593 /* Shared with UART0 */
594 &pwm4 {
595 pinctrl-names = "default";
596 pinctrl-0 = <&pwm4m1_pins>;
597 status = "disabled";
598 };
599
600 /* GPIO Connector, connected to 40-pin GPIO header */
601 &pwm5 {
602 pinctrl-names = "default";
603 pinctrl-0 = <&pwm5m1_pins>;
604 status = "okay";
605 };
606
607 /* Connected to Buzzer */
608 &pwm8 {
609 pinctrl-names = "default";
610 pinctrl-0 = <&pwm8m0_pins>;
611 status = "okay";
612 };
613
614 /* GPIO Connector, connected to 40-pin GPIO header */
615 &pwm9 {
616 pinctrl-names = "default";
617 pinctrl-0 = <&pwm9m0_pins>;
618 status = "okay";
619 };
620
621 /* GPIO Connector, connected to 40-pin GPIO header */
622 /* Shared with SPI4 */
623 &pwm10 {
624 pinctrl-names = "default";
625 pinctrl-0 = <&pwm10m0_pins>;
626 status = "disabled";
627 };
628
629 /* GPIO Connector, connected to 40-pin GPIO header */
630 /* Shared with UART3 */
631 &pwm12 {
632 pinctrl-names = "default";
633 pinctrl-0 = <&pwm12m0_pins>;
634 status = "disabled";
635 };
636
637 /* GPIO Connector, connected to 40-pin GPIO header */
638 /* Shared with UART3 */
639 &pwm13 {
640 pinctrl-names = "default";
641 pinctrl-0 = <&pwm13m0_pins>;
642 status = "disabled";
643 };
644
645 /* GPIO Connector, connected to 40-pin GPIO header */
646 &pwm14 {
647 pinctrl-names = "default";
648 pinctrl-0 = <&pwm14m0_pins>;
649 status = "okay";
650 };
651
652 /* GPIO Connector, connected to 40-pin GPIO header */
653 /* Optimized for infrared applications */
654 &pwm15 {
655 pinctrl-names = "default";
656 pinctrl-0 = <&pwm15m0_pins>;
657 status = "disabled";
658 };
659
660 /* microSD card */
661 &sdmmc {
662 status = "okay";
663 };
664
665 /* GPIO Connector, connected to 40-pin GPIO header */
666 /* Shared with UART4, UART7 and PWM10 */
667 &spi0 {
668 num-cs = <1>;
669 pinctrl-names = "default";
670 pinctrl-0 = <&spi0m2_cs0 &spi0m2_pins>;
671 status = "disabled";
672 };
673
674 /* GPIO Connector, connected to 40-pin GPIO header */
675 /* Shared with UART8 */
676 &spi4 {
677 num-cs = <1>;
678 pinctrl-names = "default";
679 pinctrl-0 = <&spi4m1_cs0 &spi4m1_pins>;
680 status = "disabled";
681 };
682
683 /* GPIO Connector, connected to 40-pin GPIO header */
684 /* Shared with PWM4 */
685 &uart0 {
686 pinctrl-names = "default";
687 pinctrl-0 = <&uart0m0_xfer>;
688 status = "disabled";
689 };
690
691 /* Debug UART */
692 &uart2 {
693 status = "okay";
694 };
695
696 /* GPIO Connector, connected to 40-pin GPIO header */
697 /* Shared with PWM12 and PWM13 */
698 &uart3 {
699 pinctrl-names = "default";
700 pinctrl-0 = <&uart3m1_xfer>;
701 status = "disabled";
702 };
703
704 /* GPIO Connector, connected to 40-pin GPIO header */
705 /* Shared with SPI0 */
706 &uart4 {
707 pinctrl-names = "default";
708 pinctrl-0 = <&uart4m2_xfer>;
709 status = "disabled";
710 };
711
712 /* GPIO Connector, connected to 40-pin GPIO header */
713 &uart6 {
714 pinctrl-names = "default";
715 pinctrl-0 = <&uart6m1_xfer>;
716 status = "okay";
717 };
718
719 /* GPIO Connector, connected to 40-pin GPIO header */
720 /* Shared with SPI0 */
721 &uart7 {
722 pinctrl-names = "default";
723 pinctrl-0 = <&uart7m2_xfer>;
724 status = "disabled";
725 };
726
727 /* GPIO Connector, connected to 40-pin GPIO header */
728 /* Shared with SPI4 */
729 &uart8 {
730 pinctrl-names = "default";
731 pinctrl-0 = <&uart8m1_xfer>;
732 status = "disabled";
733 };
734
735 /* USB2 PHY for USB Type-C port */
736 /* CM3588 USB Controller Config Table: USB20 OTG0 */
737 &u2phy0 {
738 status = "okay";
739 };
740
741 &u2phy0_otg {
742 phy-supply = <&vbus_5v0_typec>;
743 status = "okay";
744 };
745
746 /* USB2 PHY for USB 3.0 Type-A port 1 */
747 /* CM3588 USB Controller Config Table: USB20 OTG1 */
748 &u2phy1 {
749 status = "okay";
750 };
751
752 &u2phy1_otg {
753 phy-supply = <&vcc_5v0_host_30_p1>;
754 status = "okay";
755 };
756
757 /* USB2 PHY for USB 2.0 Type-A */
758 /* CM3588 USB Controller Config Table: USB20 HOST0 */
759 &u2phy2 {
760 status = "okay";
761 };
762
763 &u2phy2_host {
764 phy-supply = <&vcc_5v0_host_20>;
765 status = "okay";
766 };
767
768 /* USB2 PHY for USB 3.0 Type-A port 2 */
769 /* CM3588 USB Controller Config Table: USB20 HOST1 */
770 &u2phy3 {
771 status = "okay";
772 };
773
774 &u2phy3_host {
775 phy-supply = <&vcc_5v0_host_30_p2>;
776 status = "okay";
777 };
778
779 /* USB 2.0 Type-A */
780 /* PHY: <&u2phy2_host> */
781 &usb_host0_ehci {
782 status = "okay";
783 };
784
785 /* USB 2.0 Type-A */
786 /* PHY: <&u2phy2_host> */
787 &usb_host0_ohci {
788 status = "okay";
789 };
790
791 /* USB Type-C */
792 /* PHYs: <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3> */
793 &usb_host0_xhci {
794 usb-role-switch;
795 status = "okay";
796
797 port {
798 dwc3_0_role_switch: endpoint {
799 remote-endpoint = <&usbc0_role_sw>;
800 };
801 };
802 };
803
804 /* Lower USB 3.0 Type-A (port 2) */
805 /* PHY: <&u2phy3_host> */
806 &usb_host1_ehci {
807 status = "okay";
808 };
809
810 /* Lower USB 3.0 Type-A (port 2) */
811 /* PHY: <&u2phy3_host> */
812 &usb_host1_ohci {
813 status = "okay";
814 };
815
816 /* Upper USB 3.0 Type-A (port 1) */
817 /* PHYs: <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3> */
818 &usb_host1_xhci {
819 dr_mode = "host";
820 status = "okay";
821 };
822
823 /* Lower USB 3.0 Type-A (port 2) */
824 /* PHYs: <&combphy2_psu PHY_TYPE_USB3> */
825 &usb_host2_xhci {
826 status = "okay";
827 };
828
829 /* USB3 PHY for USB Type-C port */
830 /* CM3588 USB Controller Config Table: USB30 OTG0 */
831 &usbdp_phy0 {
832 mode-switch;
833 orientation-switch;
834 sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
835 sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
836 status = "okay";
837
838 port {
839 #address-cells = <1>;
840 #size-cells = <0>;
841
842 usbdp_phy0_orientation_switch: endpoint@0 {
843 reg = <0>;
844 remote-endpoint = <&usbc0_orien_sw>;
845 };
846
847 usbdp_phy0_dp_altmode_mux: endpoint@1 {
848 reg = <1>;
849 remote-endpoint = <&dp_altmode_mux>;
850 };
851 };
852 };
853
854 /* USB3 PHY for USB 3.0 Type-A port 1 */
855 /* CM3588 USB Controller Config Table: USB30 OTG1 */
856 &usbdp_phy1 {
857 status = "okay";
858 };
859
860 &vop {
861 status = "okay";
862 };
863
864 &vop_mmu {
865 status = "okay";
866 };
867
868 &vp0 {
869 vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
870 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
871 remote-endpoint = <&hdmi0_in_vp0>;
872 };
873 };
874
875 &vp1 {
876 vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
877 reg = <ROCKCHIP_VOP2_EP_HDMI1>;
878 remote-endpoint = <&hdmi1_in_vp1>;
879 };
880 };