| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/gpio/gpio.h> |
| 6 |
#include <dt-bindings/input/input.h> |
| 7 |
#include <dt-bindings/leds/common.h> |
| 8 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 9 |
#include <dt-bindings/pwm/pwm.h> |
| 10 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 11 |
#include "dt-bindings/usb/pd.h" |
| 12 |
|
| 13 |
#include "rk3588-firefly-core-3588j.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Firefly ITX-3588J"; |
| 17 |
compatible = "firefly,itx-3588j", "firefly,core-3588j", "rockchip,rk3588"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
ethernet0 = &gmac0; |
| 21 |
ethernet1 = &gmac1; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { |
| 25 |
stdout-path = "serial2:1500000n8"; |
| 26 |
}; |
| 27 |
|
| 28 |
/* |
| 29 |
* there are also a "Reset" and "Mask ROM" button, but the needed |
| 30 |
* settings are unknown at this time |
| 31 |
*/ |
| 32 |
adc-keys-0 { |
| 33 |
compatible = "adc-keys"; |
| 34 |
io-channels = <&saradc 1>; |
| 35 |
io-channel-names = "buttons"; |
| 36 |
keyup-threshold-microvolt = <1800000>; |
| 37 |
poll-interval = <100>; |
| 38 |
|
| 39 |
button-recovery { |
| 40 |
label = "Recovery"; |
| 41 |
linux,code = <KEY_VENDOR>; |
| 42 |
press-threshold-microvolt = <2000>; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
analog-sound { |
| 47 |
compatible = "simple-audio-card"; |
| 48 |
pinctrl-0 = <&hp_detect>; |
| 49 |
pinctrl-names = "default"; |
| 50 |
simple-audio-card,aux-devs = <&_headphones>, <&_speaker>; |
| 51 |
simple-audio-card,format = "i2s"; |
| 52 |
simple-audio-card,hp-det-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>; |
| 53 |
simple-audio-card,mclk-fs = <384>; |
| 54 |
simple-audio-card,name = "rockchip_es8323"; |
| 55 |
simple-audio-card,pin-switches = "Headphones", "Speaker"; |
| 56 |
simple-audio-card,routing = |
| 57 |
"Speaker Amplifier INL", "LOUT2", |
| 58 |
"Speaker Amplifier INR", "ROUT2", |
| 59 |
"Speaker", "Speaker Amplifier OUTL", |
| 60 |
"Speaker", "Speaker Amplifier OUTR", |
| 61 |
"Headphones Amplifier INL", "LOUT1", |
| 62 |
"Headphones Amplifier INR", "ROUT1", |
| 63 |
"Headphones", "Headphones Amplifier OUTL", |
| 64 |
"Headphones", "Headphones Amplifier OUTR", |
| 65 |
"LINPUT1", "Microphone Jack", |
| 66 |
"RINPUT1", "Microphone Jack", |
| 67 |
"LINPUT2", "Onboard Microphone", |
| 68 |
"RINPUT2", "Onboard Microphone"; |
| 69 |
simple-audio-card,widgets = |
| 70 |
"Microphone", "Microphone Jack", |
| 71 |
"Microphone", "Onboard Microphone", |
| 72 |
"Headphone", "Headphones", |
| 73 |
"Speaker", "Speaker"; |
| 74 |
|
| 75 |
simple-audio-card,cpu { |
| 76 |
sound-dai = <&i2s0_8ch>; |
| 77 |
}; |
| 78 |
|
| 79 |
simple-audio-card,codec { |
| 80 |
sound-dai = <&es8323>; |
| 81 |
system-clock-frequency = <12288000>; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
/* |
| 86 |
* this does not seem to be a proper "amplifier" but is just |
| 87 |
* a way to control the GPIO pins to switch on or off the given |
| 88 |
* sound output device |
| 89 |
*/ |
| 90 |
amp_headphones: headphones-audio-amplifier { |
| 91 |
compatible = "simple-audio-amplifier"; |
| 92 |
enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; |
| 93 |
pinctrl-names = "default"; |
| 94 |
pinctrl-0 = <&headphone_amplifier_en>; |
| 95 |
sound-name-prefix = "Headphones Amplifier"; |
| 96 |
}; |
| 97 |
|
| 98 |
amp_speaker: speaker-audio-amplifier { |
| 99 |
compatible = "simple-audio-amplifier"; |
| 100 |
enable-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; |
| 101 |
pinctrl-names = "default"; |
| 102 |
pinctrl-0 = <&speaker_amplifier_en>; |
| 103 |
sound-name-prefix = "Speaker Amplifier"; |
| 104 |
}; |
| 105 |
|
| 106 |
fan: pwm-fan { |
| 107 |
compatible = "pwm-fan"; |
| 108 |
#cooling-cells = <2>; |
| 109 |
cooling-levels = <0 120 150 180 210 240 255>; |
| 110 |
fan-supply = <&vcc12v_dcin>; |
| 111 |
pwms = <&pwm15 0 50000 1>; |
| 112 |
}; |
| 113 |
|
| 114 |
hdmi0-con { |
| 115 |
compatible = "hdmi-connector"; |
| 116 |
type = "a"; |
| 117 |
|
| 118 |
port { |
| 119 |
hdmi0_con_in: endpoint { |
| 120 |
remote-endpoint = <&hdmi0_out_con>; |
| 121 |
}; |
| 122 |
}; |
| 123 |
}; |
| 124 |
|
| 125 |
leds { |
| 126 |
compatible = "gpio-leds"; |
| 127 |
|
| 128 |
/* |
| 129 |
* There is also a Power LED control @ RK_PB3 on |
| 130 |
* GPIO1 but for some reason it doesn't seem to work right |
| 131 |
*/ |
| 132 |
|
| 133 |
user_led: led-1 { |
| 134 |
gpios = <&pca9555 3 GPIO_ACTIVE_HIGH>; |
| 135 |
linux,default-trigger = "disk-activity"; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
pcie30_avdd0v75: regulator-pcie30-avdd0v75 { |
| 140 |
compatible = "regulator-fixed"; |
| 141 |
regulator-always-on; |
| 142 |
regulator-boot-on; |
| 143 |
regulator-min-microvolt = <750000>; |
| 144 |
regulator-max-microvolt = <750000>; |
| 145 |
regulator-name = "pcie30_avdd0v75"; |
| 146 |
vin-supply = <&avdd_0v75_s0>; |
| 147 |
}; |
| 148 |
|
| 149 |
vbus5v0_typec_pwr_en: regulator-vbus5v0-typec-pwr-en { |
| 150 |
compatible = "regulator-fixed"; |
| 151 |
enable-active-high; |
| 152 |
gpios = <&pca9555 12 GPIO_ACTIVE_HIGH>; |
| 153 |
regulator-min-microvolt = <5000000>; |
| 154 |
regulator-max-microvolt = <5000000>; |
| 155 |
regulator-name = "vbus5v0_typec_pwr_en"; |
| 156 |
}; |
| 157 |
|
| 158 |
vcc12v_dcin: regulator-vcc12v-dcin { |
| 159 |
compatible = "regulator-fixed"; |
| 160 |
regulator-always-on; |
| 161 |
regulator-boot-on; |
| 162 |
regulator-min-microvolt = <12000000>; |
| 163 |
regulator-max-microvolt = <12000000>; |
| 164 |
regulator-name = "vcc12v_dcin"; |
| 165 |
}; |
| 166 |
|
| 167 |
vcc3v3_pcie30: regulator-vcc3v3-pcie30 { |
| 168 |
compatible = "regulator-fixed"; |
| 169 |
enable-active-high; |
| 170 |
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; |
| 171 |
pinctrl-names = "default"; |
| 172 |
pinctrl-0 = <&pcie3_vcc3v3_en>; |
| 173 |
regulator-min-microvolt = <3300000>; |
| 174 |
regulator-max-microvolt = <3300000>; |
| 175 |
regulator-name = "vcc3v3_pcie30"; |
| 176 |
startup-delay-us = <5000>; |
| 177 |
vin-supply = <&vcc12v_dcin>; |
| 178 |
}; |
| 179 |
|
| 180 |
vcc5v0_host: regulator-vcc5v0-host { |
| 181 |
compatible = "regulator-fixed"; |
| 182 |
enable-active-high; |
| 183 |
gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>; |
| 184 |
regulator-always-on; |
| 185 |
regulator-boot-on; |
| 186 |
regulator-min-microvolt = <5000000>; |
| 187 |
regulator-max-microvolt = <5000000>; |
| 188 |
regulator-name = "vcc5v0_host"; |
| 189 |
vin-supply = <&vcc5v0_usb>; |
| 190 |
}; |
| 191 |
|
| 192 |
vcc5v0_host3: regulator-vcc5v0-host3 { |
| 193 |
compatible = "regulator-fixed"; |
| 194 |
enable-active-high; |
| 195 |
gpios = <&pca9555 7 GPIO_ACTIVE_HIGH>; |
| 196 |
regulator-name = "vcc5v0_host3"; |
| 197 |
regulator-boot-on; |
| 198 |
regulator-always-on; |
| 199 |
regulator-min-microvolt = <5000000>; |
| 200 |
regulator-max-microvolt = <5000000>; |
| 201 |
vin-supply = <&vcc5v0_usb>; |
| 202 |
}; |
| 203 |
|
| 204 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 205 |
compatible = "regulator-fixed"; |
| 206 |
regulator-always-on; |
| 207 |
regulator-boot-on; |
| 208 |
regulator-min-microvolt = <5000000>; |
| 209 |
regulator-max-microvolt = <5000000>; |
| 210 |
regulator-name = "vcc5v0_sys"; |
| 211 |
vin-supply = <&vcc12v_dcin>; |
| 212 |
}; |
| 213 |
|
| 214 |
vcc5v0_usb: regulator-vcc5v0-usb { |
| 215 |
compatible = "regulator-fixed"; |
| 216 |
regulator-always-on; |
| 217 |
regulator-boot-on; |
| 218 |
regulator-min-microvolt = <5000000>; |
| 219 |
regulator-max-microvolt = <5000000>; |
| 220 |
regulator-name = "vcc5v0_usb"; |
| 221 |
vin-supply = <&vcc12v_dcin>; |
| 222 |
}; |
| 223 |
|
| 224 |
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { |
| 225 |
compatible = "regulator-fixed"; |
| 226 |
regulator-always-on; |
| 227 |
regulator-boot-on; |
| 228 |
regulator-min-microvolt = <1100000>; |
| 229 |
regulator-max-microvolt = <1100000>; |
| 230 |
regulator-name = "vcc_1v1_nldo_s3"; |
| 231 |
vin-supply = <&vcc5v0_sys>; |
| 232 |
}; |
| 233 |
|
| 234 |
vcc_fan_pwr_en: regulator-vcc-fan-pwr-en { |
| 235 |
compatible = "regulator-fixed"; |
| 236 |
enable-active-high; |
| 237 |
gpios = <&pca9555 11 GPIO_ACTIVE_HIGH>; |
| 238 |
regulator-always-on; |
| 239 |
regulator-boot-on; |
| 240 |
regulator-name = "vcc_fan_pwr_en"; |
| 241 |
}; |
| 242 |
|
| 243 |
vcc_hub_reset: regulator-vcc-hub-reset { |
| 244 |
compatible = "regulator-fixed"; |
| 245 |
enable-active-high; |
| 246 |
gpios = <&pca9555 4 GPIO_ACTIVE_HIGH>; |
| 247 |
regulator-always-on; |
| 248 |
regulator-boot-on; |
| 249 |
regulator-name = "vcc_hub_reset"; |
| 250 |
}; |
| 251 |
|
| 252 |
vcc_hub3_reset: regulator-vcc-hub3-reset { |
| 253 |
compatible = "regulator-fixed"; |
| 254 |
enable-active-high; |
| 255 |
gpios = <&pca9555 6 GPIO_ACTIVE_HIGH>; |
| 256 |
regulator-always-on; |
| 257 |
regulator-name = "vcc_hub3_reset"; |
| 258 |
}; |
| 259 |
|
| 260 |
vcc_sata_pwr_en: regulator-vcc-sata-pwr-en { |
| 261 |
compatible = "regulator-fixed"; |
| 262 |
enable-active-high; |
| 263 |
gpios = <&pca9555 10 GPIO_ACTIVE_HIGH>; |
| 264 |
regulator-always-on; |
| 265 |
regulator-boot-on; |
| 266 |
regulator-name = "vcc_sata_pwr_en"; |
| 267 |
}; |
| 268 |
}; |
| 269 |
|
| 270 |
&avcc_1v8_s0 { |
| 271 |
regulator-state-mem { |
| 272 |
regulator-on-in-suspend; |
| 273 |
}; |
| 274 |
}; |
| 275 |
|
| 276 |
&combphy0_ps { |
| 277 |
status = "okay"; |
| 278 |
}; |
| 279 |
|
| 280 |
&combphy1_ps { |
| 281 |
status = "okay"; |
| 282 |
}; |
| 283 |
|
| 284 |
&combphy2_psu { |
| 285 |
status = "okay"; |
| 286 |
}; |
| 287 |
|
| 288 |
&gmac0 { |
| 289 |
clock_in_out = "output"; |
| 290 |
phy-handle = <&rgmii_phy0>; |
| 291 |
phy-mode = "rgmii-rxid"; |
| 292 |
pinctrl-names = "default"; |
| 293 |
pinctrl-0 = <&gmac0_miim |
| 294 |
&gmac0_tx_bus2 |
| 295 |
&gmac0_rx_bus2 |
| 296 |
&gmac0_rgmii_clk |
| 297 |
&gmac0_rgmii_bus>; |
| 298 |
tx_delay = <0x45>; |
| 299 |
rx_delay = <0x4a>; |
| 300 |
status = "okay"; |
| 301 |
}; |
| 302 |
|
| 303 |
&gmac1 { |
| 304 |
clock_in_out = "output"; |
| 305 |
phy-handle = <&rgmii_phy1>; |
| 306 |
phy-mode = "rgmii-rxid"; |
| 307 |
pinctrl-names = "default"; |
| 308 |
pinctrl-0 = <&gmac1_miim |
| 309 |
&gmac1_tx_bus2 |
| 310 |
&gmac1_rx_bus2 |
| 311 |
&gmac1_rgmii_clk |
| 312 |
&gmac1_rgmii_bus>; |
| 313 |
tx_delay = <0x42>; |
| 314 |
rx_delay = <0x4f>; |
| 315 |
status = "okay"; |
| 316 |
}; |
| 317 |
|
| 318 |
&gpu { |
| 319 |
mali-supply = <&vdd_gpu_s0>; |
| 320 |
sram-supply = <&vdd_gpu_mem_s0>; |
| 321 |
status = "okay"; |
| 322 |
}; |
| 323 |
|
| 324 |
&hdmi0 { |
| 325 |
status = "okay"; |
| 326 |
}; |
| 327 |
|
| 328 |
&hdmi0_in { |
| 329 |
hdmi0_in_vp0: endpoint { |
| 330 |
remote-endpoint = <&vp0_out_hdmi0>; |
| 331 |
}; |
| 332 |
}; |
| 333 |
|
| 334 |
&hdmi0_out { |
| 335 |
hdmi0_out_con: endpoint { |
| 336 |
remote-endpoint = <&hdmi0_con_in>; |
| 337 |
}; |
| 338 |
}; |
| 339 |
|
| 340 |
&hdptxphy0 { |
| 341 |
status = "okay"; |
| 342 |
}; |
| 343 |
|
| 344 |
&i2c3 { |
| 345 |
status = "okay"; |
| 346 |
|
| 347 |
/* |
| 348 |
* in the Firefly BSP source this was confusingly called an |
| 349 |
* "ES8388" - it actually seems to be an ES8323 and the drivers |
| 350 |
* for that work best |
| 351 |
*/ |
| 352 |
es8323: audio-codec@11 { |
| 353 |
compatible = "everest,es8323"; |
| 354 |
reg = <0x11>; |
| 355 |
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; |
| 356 |
assigned-clock-rates = <12288000>; |
| 357 |
clocks = <&cru I2S0_8CH_MCLKOUT>; |
| 358 |
clock-names = "mclk"; |
| 359 |
#sound-dai-cells = <0>; |
| 360 |
}; |
| 361 |
}; |
| 362 |
|
| 363 |
&i2c6 { |
| 364 |
pinctrl-names = "default"; |
| 365 |
pinctrl-0 = <&i2c6m0_xfer>; |
| 366 |
status = "okay"; |
| 367 |
|
| 368 |
pca9555: gpio@21 { |
| 369 |
compatible = "nxp,pca9555"; |
| 370 |
reg = <0x21>; |
| 371 |
gpio-controller; |
| 372 |
#gpio-cells = <2>; |
| 373 |
}; |
| 374 |
|
| 375 |
usbc0: usb-typec@22 { |
| 376 |
compatible = "fcs,fusb302"; |
| 377 |
reg = <0x22>; |
| 378 |
interrupt-parent = <&gpio0>; |
| 379 |
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; |
| 380 |
pinctrl-names = "default"; |
| 381 |
pinctrl-0 = <&usbc0_int>; |
| 382 |
vbus-supply = <&vbus5v0_typec_pwr_en>; |
| 383 |
|
| 384 |
usb_con: connector { |
| 385 |
compatible = "usb-c-connector"; |
| 386 |
label = "USB-C"; |
| 387 |
data-role = "dual"; |
| 388 |
op-sink-microwatt = <1000000>; |
| 389 |
power-role = "dual"; |
| 390 |
sink-pdos = |
| 391 |
<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; |
| 392 |
source-pdos = |
| 393 |
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; |
| 394 |
try-power-role = "source"; |
| 395 |
|
| 396 |
ports { |
| 397 |
#address-cells = <1>; |
| 398 |
#size-cells = <0>; |
| 399 |
|
| 400 |
port@0 { |
| 401 |
reg = <0>; |
| 402 |
|
| 403 |
usbc0_orien_sw: endpoint { |
| 404 |
remote-endpoint = <&usbdp_phy0_orientation_switch>; |
| 405 |
}; |
| 406 |
}; |
| 407 |
|
| 408 |
port@1 { |
| 409 |
reg = <1>; |
| 410 |
|
| 411 |
usbc0_role_sw: endpoint { |
| 412 |
remote-endpoint = <&dwc3_0_role_switch>; |
| 413 |
}; |
| 414 |
}; |
| 415 |
|
| 416 |
port@2 { |
| 417 |
reg = <2>; |
| 418 |
|
| 419 |
dp_altmode_mux: endpoint { |
| 420 |
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; |
| 421 |
}; |
| 422 |
}; |
| 423 |
}; |
| 424 |
}; |
| 425 |
}; |
| 426 |
|
| 427 |
hym8563: rtc@51 { |
| 428 |
compatible = "haoyu,hym8563"; |
| 429 |
reg = <0x51>; |
| 430 |
interrupt-parent = <&gpio0>; |
| 431 |
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; |
| 432 |
#clock-cells = <0>; |
| 433 |
clock-output-names = "hym8563"; |
| 434 |
pinctrl-names = "default"; |
| 435 |
pinctrl-0 = <&hym8563_int>; |
| 436 |
wakeup-source; |
| 437 |
}; |
| 438 |
}; |
| 439 |
|
| 440 |
&i2s0_8ch { |
| 441 |
pinctrl-names = "default"; |
| 442 |
pinctrl-0 = <&i2s0_lrck |
| 443 |
&i2s0_mclk |
| 444 |
&i2s0_sclk |
| 445 |
&i2s0_sdi0 |
| 446 |
&i2s0_sdo0>; |
| 447 |
status = "okay"; |
| 448 |
}; |
| 449 |
|
| 450 |
&mdio0 { |
| 451 |
rgmii_phy0: ethernet-phy@1 { |
| 452 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 453 |
reg = <0x1>; |
| 454 |
}; |
| 455 |
}; |
| 456 |
|
| 457 |
&mdio1 { |
| 458 |
rgmii_phy1: ethernet-phy@1 { |
| 459 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 460 |
reg = <0x1>; |
| 461 |
}; |
| 462 |
}; |
| 463 |
|
| 464 |
&pcie2x1l0 { |
| 465 |
pinctrl-names = "default"; |
| 466 |
pinctrl-0 = <&pcie2_0_rst>; |
| 467 |
reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; |
| 468 |
status = "okay"; |
| 469 |
}; |
| 470 |
|
| 471 |
&pcie30phy { |
| 472 |
status = "okay"; |
| 473 |
}; |
| 474 |
|
| 475 |
&pcie3x4 { |
| 476 |
pinctrl-names = "default"; |
| 477 |
pinctrl-0 = <&pcie3_rst>; |
| 478 |
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; |
| 479 |
vpcie3v3-supply = <&vcc3v3_pcie30>; |
| 480 |
status = "okay"; |
| 481 |
}; |
| 482 |
|
| 483 |
&pinctrl { |
| 484 |
dp { |
| 485 |
dp1_hpd: dp1-hpd { |
| 486 |
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 487 |
}; |
| 488 |
}; |
| 489 |
|
| 490 |
hym8563 { |
| 491 |
hym8563_int: hym8563-int { |
| 492 |
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 493 |
}; |
| 494 |
}; |
| 495 |
|
| 496 |
gpio-leds { |
| 497 |
sys_led_pin: sys-led-pin { |
| 498 |
rockchip,pins = |
| 499 |
<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 500 |
}; |
| 501 |
}; |
| 502 |
|
| 503 |
pcie2 { |
| 504 |
pcie2_0_rst: pcie2-0-rst { |
| 505 |
rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 506 |
}; |
| 507 |
}; |
| 508 |
|
| 509 |
pcie3 { |
| 510 |
pcie3_rst: pcie3-rst { |
| 511 |
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 512 |
}; |
| 513 |
|
| 514 |
pcie3_vcc3v3_en: pcie3-vcc3v3-en { |
| 515 |
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 516 |
}; |
| 517 |
}; |
| 518 |
|
| 519 |
sound { |
| 520 |
hp_detect: hp-detect { |
| 521 |
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 522 |
}; |
| 523 |
|
| 524 |
headphone_amplifier_en: headphone-amplifier-en { |
| 525 |
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 526 |
}; |
| 527 |
|
| 528 |
speaker_amplifier_en: speaker-amplifier-en { |
| 529 |
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 530 |
}; |
| 531 |
}; |
| 532 |
|
| 533 |
usb { |
| 534 |
usbc0_int: usbc0-int { |
| 535 |
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 536 |
}; |
| 537 |
}; |
| 538 |
}; |
| 539 |
|
| 540 |
&pwm15 { |
| 541 |
pinctrl-names = "default"; |
| 542 |
pinctrl-0 = <&pwm15m2_pins>; |
| 543 |
status = "okay"; |
| 544 |
}; |
| 545 |
|
| 546 |
&sata0 { |
| 547 |
status = "okay"; |
| 548 |
}; |
| 549 |
|
| 550 |
&sata1 { |
| 551 |
status = "okay"; |
| 552 |
}; |
| 553 |
|
| 554 |
&sata2 { |
| 555 |
status = "okay"; |
| 556 |
}; |
| 557 |
|
| 558 |
/* uart/232/485 */ |
| 559 |
&uart0 { |
| 560 |
pinctrl-0 = <&uart0m2_xfer>; |
| 561 |
status = "okay"; |
| 562 |
}; |
| 563 |
|
| 564 |
&uart1 { |
| 565 |
pinctrl-0 = <&uart1m1_xfer>; |
| 566 |
status = "okay"; |
| 567 |
}; |
| 568 |
|
| 569 |
/* usb enable */ |
| 570 |
&u2phy0 { |
| 571 |
status = "okay"; |
| 572 |
}; |
| 573 |
|
| 574 |
&u2phy0_otg { |
| 575 |
status = "okay"; |
| 576 |
}; |
| 577 |
|
| 578 |
&u2phy1 { |
| 579 |
status = "okay"; |
| 580 |
}; |
| 581 |
|
| 582 |
&u2phy1_otg { |
| 583 |
phy-supply = <&vcc5v0_host>; |
| 584 |
status = "okay"; |
| 585 |
}; |
| 586 |
|
| 587 |
&u2phy2 { |
| 588 |
status = "okay"; |
| 589 |
}; |
| 590 |
|
| 591 |
&u2phy2_host { |
| 592 |
phy-supply = <&vcc5v0_host>; |
| 593 |
status = "okay"; |
| 594 |
}; |
| 595 |
|
| 596 |
&u2phy3 { |
| 597 |
status = "okay"; |
| 598 |
}; |
| 599 |
|
| 600 |
&u2phy3_host { |
| 601 |
phy-supply = <&vcc5v0_host>; |
| 602 |
status = "okay"; |
| 603 |
}; |
| 604 |
|
| 605 |
&usb_host0_ehci { |
| 606 |
status = "okay"; |
| 607 |
}; |
| 608 |
|
| 609 |
&usb_host0_ohci { |
| 610 |
status = "okay"; |
| 611 |
}; |
| 612 |
|
| 613 |
&usb_host1_ehci { |
| 614 |
status = "okay"; |
| 615 |
}; |
| 616 |
|
| 617 |
&usb_host1_ohci { |
| 618 |
status = "okay"; |
| 619 |
}; |
| 620 |
|
| 621 |
&usb_host0_xhci { |
| 622 |
usb-role-switch; |
| 623 |
dr_mode = "otg"; |
| 624 |
status = "okay"; |
| 625 |
|
| 626 |
port { |
| 627 |
#address-cells = <1>; |
| 628 |
#size-cells = <0>; |
| 629 |
|
| 630 |
dwc3_0_role_switch: endpoint@0 { |
| 631 |
reg = <0>; |
| 632 |
remote-endpoint = <&usbc0_role_sw>; |
| 633 |
}; |
| 634 |
}; |
| 635 |
}; |
| 636 |
|
| 637 |
&usb_host1_xhci { |
| 638 |
dr_mode = "host"; |
| 639 |
status = "okay"; |
| 640 |
}; |
| 641 |
|
| 642 |
&usb_host2_xhci { |
| 643 |
status = "okay"; |
| 644 |
}; |
| 645 |
|
| 646 |
&usbdp_phy0 { |
| 647 |
orientation-switch; |
| 648 |
sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; |
| 649 |
sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; |
| 650 |
status = "okay"; |
| 651 |
|
| 652 |
port { |
| 653 |
#address-cells = <1>; |
| 654 |
#size-cells = <0>; |
| 655 |
|
| 656 |
usbdp_phy0_orientation_switch: endpoint@0 { |
| 657 |
reg = <0>; |
| 658 |
remote-endpoint = <&usbc0_orien_sw>; |
| 659 |
}; |
| 660 |
|
| 661 |
usbdp_phy0_dp_altmode_mux: endpoint@1 { |
| 662 |
reg = <1>; |
| 663 |
remote-endpoint = <&dp_altmode_mux>; |
| 664 |
}; |
| 665 |
}; |
| 666 |
}; |
| 667 |
|
| 668 |
&usbdp_phy1 { |
| 669 |
rockchip,dp-lane-mux = <2 3>; |
| 670 |
status = "okay"; |
| 671 |
}; |
| 672 |
|
| 673 |
&vcc_1v8_s0 { |
| 674 |
regulator-state-mem { |
| 675 |
regulator-on-in-suspend; |
| 676 |
regulator-suspend-microvolt = <1800000>; |
| 677 |
}; |
| 678 |
}; |
| 679 |
|
| 680 |
/* for fan when deep sleep */ |
| 681 |
&vdd_log_s0 { |
| 682 |
regulator-state-mem { |
| 683 |
regulator-on-in-suspend; |
| 684 |
regulator-suspend-microvolt = <750000>; |
| 685 |
}; |
| 686 |
}; |
| 687 |
|
| 688 |
/* display generator */ |
| 689 |
&vop_mmu { |
| 690 |
status = "okay"; |
| 691 |
}; |
| 692 |
|
| 693 |
&vop { |
| 694 |
status = "okay"; |
| 695 |
}; |
| 696 |
|
| 697 |
&vp0 { |
| 698 |
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 699 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 700 |
remote-endpoint = <&hdmi0_in_vp0>; |
| 701 |
}; |
| 702 |
}; |