Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
4 */
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/soc/rockchip,vop2.h>
8
9 / {
10 chosen {
11 stdout-path = "serial2:1500000n8";
12 };
13
14 hdmi1-con {
15 compatible = "hdmi-connector";
16 type = "a";
17
18 port {
19 hdmi1_con_in: endpoint {
20 remote-endpoint = <&hdmi1_out_con>;
21 };
22 };
23 };
24
25 /* Unnamed gated oscillator: 100MHz,3.3V,3225 */
26 pcie30_port0_refclk: pcie30_port1_refclk: pcie-oscillator {
27 compatible = "gated-fixed-clock";
28 #clock-cells = <0>;
29 clock-frequency = <100000000>;
30 clock-output-names = "pcie30_refclk";
31 vdd-supply = <&vcc3v3_pi6c_05>;
32 };
33
34 vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
35 compatible = "regulator-fixed";
36 regulator-name = "vcc3v3_pcie2x1l0";
37 regulator-min-microvolt = <3300000>;
38 regulator-max-microvolt = <3300000>;
39 startup-delay-us = <5000>;
40 vin-supply = <&vcc_3v3_s3>;
41 };
42
43 vcc3v3_bkey: regulator-vcc3v3-bkey {
44 compatible = "regulator-fixed";
45 enable-active-high;
46 gpios = <&gpio2 RK_PC4 GPIO_ACTIVE_HIGH>; /* PCIE_4G_PWEN */
47 pinctrl-names = "default";
48 pinctrl-0 = <&pcie_4g_pwen>;
49 regulator-name = "vcc3v3_bkey";
50 regulator-min-microvolt = <3300000>;
51 regulator-max-microvolt = <3300000>;
52 startup-delay-us = <5000>;
53 vin-supply = <&vcc5v0_sys>;
54 };
55
56 vcc3v3_pcie30: vcc3v3_pi6c_05: regulator-vcc3v3-pi6c-05 {
57 compatible = "regulator-fixed";
58 enable-active-high;
59 gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; /* PCIE30x4_PWREN_H */
60 pinctrl-names = "default";
61 pinctrl-0 = <&pcie30x4_pwren_h>;
62 regulator-name = "vcc3v3_pcie30";
63 regulator-min-microvolt = <3300000>;
64 regulator-max-microvolt = <3300000>;
65 startup-delay-us = <5000>;
66 vin-supply = <&vcc5v0_sys>;
67 };
68
69 vcc5v0_host: regulator-vcc5v0-host {
70 compatible = "regulator-fixed";
71 enable-active-high;
72 gpio = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
73 pinctrl-names = "default";
74 pinctrl-0 = <&vcc5v0_host_en>;
75 regulator-name = "vcc5v0_host";
76 regulator-min-microvolt = <5000000>;
77 regulator-max-microvolt = <5000000>;
78 regulator-boot-on;
79 regulator-always-on;
80 vin-supply = <&vcc5v0_sys>;
81 };
82 };
83
84 &combphy0_ps {
85 status = "okay";
86 };
87
88 &combphy1_ps {
89 status = "okay";
90 };
91
92 &combphy2_psu {
93 status = "okay";
94 };
95
96 &hdmi1 {
97 status = "okay";
98 };
99
100 &hdmi1_in {
101 hdmi1_in_vp0: endpoint {
102 remote-endpoint = <&vp0_out_hdmi1>;
103 };
104 };
105
106 &hdmi1_out {
107 hdmi1_out_con: endpoint {
108 remote-endpoint = <&hdmi1_con_in>;
109 };
110 };
111
112 &hdptxphy1 {
113 status = "okay";
114 };
115
116 &i2c6 {
117 status = "okay";
118
119 hym8563: rtc@51 {
120 compatible = "haoyu,hym8563";
121 reg = <0x51>;
122 interrupt-parent = <&gpio0>;
123 interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
124 #clock-cells = <0>;
125 clock-output-names = "hym8563";
126 pinctrl-names = "default";
127 pinctrl-0 = <&hym8563_int>;
128 wakeup-source;
129 };
130 };
131
132 /* ETH */
133 &pcie2x1l0 {
134 pinctrl-names = "default";
135 pinctrl-0 = <&pcie2_0_rst>;
136 reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; /* PCIE20_1_PERST_L */
137 vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
138 status = "okay";
139 };
140
141 &pcie30phy {
142 data-lanes = <1 1 2 2>;
143 /* separate clock lines from the clock generator to phy and devices */
144 rockchip,rx-common-refclk-mode = <0 0 0 0>;
145 status = "okay";
146 };
147
148 /* M-Key */
149 &pcie3x2 {
150 /*
151 * The board has a "pcie_refclk" oscillator that needs enabling,
152 * so add it to the list of clocks.
153 */
154 clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
155 <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
156 <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>,
157 <&pcie30_port1_refclk>;
158 clock-names = "aclk_mst", "aclk_slv",
159 "aclk_dbi", "pclk",
160 "aux", "pipe",
161 "ref";
162 num-lanes = <2>;
163 pinctrl-names = "default";
164 pinctrl-0 = <&pcie30x2_perstn_m1_l>;
165 reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* PCIE30X2_PERSTn_M1_L */
166 vpcie3v3-supply = <&vcc3v3_pcie30>;
167 status = "okay";
168 };
169
170 /* B-Key and E-Key */
171 &pcie3x4 {
172 /*
173 * The board has a "pcie_refclk" oscillator that needs enabling,
174 * so add it to the list of clocks.
175 */
176 clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
177 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
178 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
179 <&pcie30_port0_refclk>;
180 clock-names = "aclk_mst", "aclk_slv",
181 "aclk_dbi", "pclk",
182 "aux", "pipe",
183 "ref";
184 pinctrl-names = "default";
185 pinctrl-0 = <&pcie30x4_perstn_m1_l>;
186 reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTn_M1_L */
187 vpcie3v3-supply = <&vcc3v3_bkey>;
188 status = "okay";
189 };
190
191 &pinctrl {
192 pcie2 {
193 pcie2_0_rst: pcie2-0-rst {
194 rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
195 };
196 };
197
198 pcie3 {
199 pcie30x2_perstn_m1_l: pcie30x2-perstn-m1-l {
200 rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
201 };
202
203 pcie_4g_pwen: pcie-4g-pwen {
204 rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
205 };
206
207 pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l {
208 rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
209 };
210
211 pcie30x4_pwren_h: pcie30x4-pwren-h {
212 rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
213 };
214 };
215
216 hym8563 {
217 hym8563_int: hym8563-int {
218 rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
219 };
220 };
221
222 usb {
223 vcc5v0_host_en: vcc5v0-host-en {
224 rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
225 };
226 };
227 };
228
229 /* FAN */
230 &pwm2 {
231 pinctrl-0 = <&pwm2m1_pins>;
232 pinctrl-names = "default";
233 status = "okay";
234 };
235
236 &sata0 {
237 status = "okay";
238 };
239
240 &sdmmc {
241 bus-width = <4>;
242 cap-mmc-highspeed;
243 cap-sd-highspeed;
244 disable-wp;
245 no-sdio;
246 no-mmc;
247 sd-uhs-sdr104;
248 vmmc-supply = <&vcc_3v3_s3>;
249 vqmmc-supply = <&vccio_sd_s0>;
250 status = "okay";
251 };
252
253 &uart2 {
254 pinctrl-0 = <&uart2m0_xfer>;
255 status = "okay";
256 };
257
258 /* RS232 */
259 &uart6 {
260 pinctrl-0 = <&uart6m0_xfer>;
261 pinctrl-names = "default";
262 status = "okay";
263 };
264
265 /* RS485 */
266 &uart7 {
267 pinctrl-0 = <&uart7m2_xfer>;
268 pinctrl-names = "default";
269 status = "okay";
270 };
271
272 &u2phy2 {
273 status = "okay";
274 };
275
276 &u2phy2_host {
277 /* connected to USB hub, which is powered by vcc5v0_sys */
278 phy-supply = <&vcc5v0_sys>;
279 status = "okay";
280 };
281
282 &u2phy3 {
283 status = "okay";
284 };
285
286 &u2phy3_host {
287 phy-supply = <&vcc5v0_host>;
288 status = "okay";
289 };
290
291 &usb_host0_ehci {
292 status = "okay";
293 };
294
295 &usb_host0_ohci {
296 status = "okay";
297 };
298
299 &usb_host1_ehci {
300 status = "okay";
301 };
302
303 &usb_host1_ohci {
304 status = "okay";
305 };
306
307 &usb_host2_xhci {
308 status = "okay";
309 };
310
311 &vop_mmu {
312 status = "okay";
313 };
314
315 &vop {
316 status = "okay";
317 };
318
319 &vp0 {
320 vp0_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
321 reg = <ROCKCHIP_VOP2_EP_HDMI1>;
322 remote-endpoint = <&hdmi1_in_vp0>;
323 };
324 };