| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2023 Rockchip Electronics Co., Ltd. |
| 4 |
* |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include <dt-bindings/leds/common.h> |
| 10 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 11 |
#include "rk3588-coolpi-cm5.dtsi" |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "RK3588 CoolPi CM5 EVB"; |
| 15 |
compatible = "coolpi,pi-cm5-evb", "coolpi,pi-cm5", "rockchip,rk3588"; |
| 16 |
|
| 17 |
backlight: backlight { |
| 18 |
compatible = "pwm-backlight"; |
| 19 |
enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; |
| 20 |
pinctrl-names = "default"; |
| 21 |
pinctrl-0 = <&bl_en>; |
| 22 |
power-supply = <&vcc12v_dcin>; |
| 23 |
pwms = <&pwm2 0 25000 0>; |
| 24 |
}; |
| 25 |
|
| 26 |
hdmi0-con { |
| 27 |
compatible = "hdmi-connector"; |
| 28 |
type = "a"; |
| 29 |
|
| 30 |
port { |
| 31 |
hdmi0_con_in: endpoint { |
| 32 |
remote-endpoint = <&hdmi0_out_con>; |
| 33 |
}; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
hdmi1-con { |
| 38 |
compatible = "hdmi-connector"; |
| 39 |
type = "a"; |
| 40 |
|
| 41 |
port { |
| 42 |
hdmi1_con_in: endpoint { |
| 43 |
remote-endpoint = <&hdmi1_out_con>; |
| 44 |
}; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
leds: leds { |
| 49 |
compatible = "gpio-leds"; |
| 50 |
|
| 51 |
green_led: led-0 { |
| 52 |
color = <LED_COLOR_ID_GREEN>; |
| 53 |
function = LED_FUNCTION_STATUS; |
| 54 |
gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 55 |
linux,default-trigger = "heartbeat"; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
vcc12v_dcin: regulator-vcc12v-dcin { |
| 60 |
compatible = "regulator-fixed"; |
| 61 |
regulator-name = "vcc12v_dcin"; |
| 62 |
regulator-always-on; |
| 63 |
regulator-boot-on; |
| 64 |
regulator-min-microvolt = <12000000>; |
| 65 |
regulator-max-microvolt = <12000000>; |
| 66 |
}; |
| 67 |
|
| 68 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 69 |
compatible = "regulator-fixed"; |
| 70 |
regulator-name = "vcc5v0_sys"; |
| 71 |
regulator-always-on; |
| 72 |
regulator-boot-on; |
| 73 |
regulator-min-microvolt = <5000000>; |
| 74 |
regulator-max-microvolt = <5000000>; |
| 75 |
vin-supply = <&vcc12v_dcin>; |
| 76 |
}; |
| 77 |
|
| 78 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 79 |
compatible = "regulator-fixed"; |
| 80 |
regulator-name = "vcc3v3_sys"; |
| 81 |
regulator-always-on; |
| 82 |
regulator-boot-on; |
| 83 |
regulator-min-microvolt = <3300000>; |
| 84 |
regulator-max-microvolt = <3300000>; |
| 85 |
vin-supply = <&vcc12v_dcin>; |
| 86 |
}; |
| 87 |
|
| 88 |
vcc3v3_lcd: regulator-vcc3v3-lcd { |
| 89 |
compatible = "regulator-fixed"; |
| 90 |
regulator-name = "vcc3v3_lcd"; |
| 91 |
enable-active-high; |
| 92 |
gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; |
| 93 |
pinctrl-names = "default"; |
| 94 |
pinctrl-0 = <&lcdpwr_en>; |
| 95 |
vin-supply = <&vcc3v3_sys>; |
| 96 |
}; |
| 97 |
|
| 98 |
vcc5v0_usb_host1: vcc5v0_usb_host2: regulator-vcc5v0-usb-host { |
| 99 |
compatible = "regulator-fixed"; |
| 100 |
regulator-name = "vcc5v0_host"; |
| 101 |
regulator-boot-on; |
| 102 |
regulator-always-on; |
| 103 |
enable-active-high; |
| 104 |
regulator-min-microvolt = <5000000>; |
| 105 |
regulator-max-microvolt = <5000000>; |
| 106 |
gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; |
| 107 |
pinctrl-names = "default"; |
| 108 |
pinctrl-0 = <&usb_host_pwren>; |
| 109 |
vin-supply = <&vcc5v0_sys>; |
| 110 |
}; |
| 111 |
|
| 112 |
vcc5v0_usb30_otg: regulator-vcc5v0-usb30-otg { |
| 113 |
compatible = "regulator-fixed"; |
| 114 |
regulator-name = "vcc5v0_otg"; |
| 115 |
regulator-boot-on; |
| 116 |
regulator-always-on; |
| 117 |
enable-active-high; |
| 118 |
regulator-min-microvolt = <5000000>; |
| 119 |
regulator-max-microvolt = <5000000>; |
| 120 |
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; |
| 121 |
pinctrl-names = "default"; |
| 122 |
pinctrl-0 = <&usb_otg_pwren>; |
| 123 |
vin-supply = <&vcc5v0_sys>; |
| 124 |
}; |
| 125 |
}; |
| 126 |
|
| 127 |
&hdmi0 { |
| 128 |
status = "okay"; |
| 129 |
}; |
| 130 |
|
| 131 |
&hdmi0_sound { |
| 132 |
status = "okay"; |
| 133 |
}; |
| 134 |
|
| 135 |
&hdmi0_in { |
| 136 |
hdmi0_in_vp0: endpoint { |
| 137 |
remote-endpoint = <&vp0_out_hdmi0>; |
| 138 |
}; |
| 139 |
}; |
| 140 |
|
| 141 |
&hdmi0_out { |
| 142 |
hdmi0_out_con: endpoint { |
| 143 |
remote-endpoint = <&hdmi0_con_in>; |
| 144 |
}; |
| 145 |
}; |
| 146 |
|
| 147 |
&hdmi1 { |
| 148 |
pinctrl-names = "default"; |
| 149 |
pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd &hdmim1_tx1_scl &hdmim1_tx1_sda>; |
| 150 |
status = "okay"; |
| 151 |
}; |
| 152 |
|
| 153 |
&hdmi1_in { |
| 154 |
hdmi1_in_vp1: endpoint { |
| 155 |
remote-endpoint = <&vp1_out_hdmi1>; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
&hdmi1_out { |
| 160 |
hdmi1_out_con: endpoint { |
| 161 |
remote-endpoint = <&hdmi1_con_in>; |
| 162 |
}; |
| 163 |
}; |
| 164 |
|
| 165 |
&hdmi1_sound { |
| 166 |
status = "okay"; |
| 167 |
}; |
| 168 |
|
| 169 |
&hdptxphy0 { |
| 170 |
status = "okay"; |
| 171 |
}; |
| 172 |
|
| 173 |
&hdptxphy1 { |
| 174 |
status = "okay"; |
| 175 |
}; |
| 176 |
|
| 177 |
&i2s5_8ch { |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&i2s6_8ch { |
| 182 |
status = "okay"; |
| 183 |
}; |
| 184 |
|
| 185 |
/* M.2 E-Key */ |
| 186 |
&pcie2x1l1 { |
| 187 |
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; |
| 188 |
vpcie3v3-supply = <&vcc3v3_sys>; |
| 189 |
pinctrl-names = "default"; |
| 190 |
pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>; |
| 191 |
status = "okay"; |
| 192 |
}; |
| 193 |
|
| 194 |
&pcie30phy { |
| 195 |
status = "okay"; |
| 196 |
}; |
| 197 |
|
| 198 |
/* Standard pcie */ |
| 199 |
&pcie3x2 { |
| 200 |
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; |
| 201 |
vpcie3v3-supply = <&vcc3v3_sys>; |
| 202 |
status = "okay"; |
| 203 |
}; |
| 204 |
|
| 205 |
/* M.2 M-Key ssd */ |
| 206 |
&pcie3x4 { |
| 207 |
num-lanes = <2>; |
| 208 |
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; |
| 209 |
vpcie3v3-supply = <&vcc3v3_sys>; |
| 210 |
status = "okay"; |
| 211 |
}; |
| 212 |
|
| 213 |
&pinctrl { |
| 214 |
lcd { |
| 215 |
lcdpwr_en: lcdpwr-en { |
| 216 |
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; |
| 217 |
}; |
| 218 |
|
| 219 |
bl_en: bl-en { |
| 220 |
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 221 |
}; |
| 222 |
}; |
| 223 |
|
| 224 |
usb { |
| 225 |
usb_host_pwren: usb-host-pwren { |
| 226 |
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 227 |
}; |
| 228 |
|
| 229 |
usb_otg_pwren: usb-otg-pwren { |
| 230 |
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
wifi { |
| 235 |
bt_pwron: bt-pwron { |
| 236 |
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; |
| 237 |
}; |
| 238 |
|
| 239 |
pcie_clkreq: pcie-clkreq { |
| 240 |
rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 241 |
}; |
| 242 |
|
| 243 |
pcie_rst: pcie-rst { |
| 244 |
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 245 |
}; |
| 246 |
|
| 247 |
wifi_pwron: wifi-pwron { |
| 248 |
rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; |
| 249 |
}; |
| 250 |
|
| 251 |
pcie_wake: pcie-wake { |
| 252 |
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; |
| 253 |
}; |
| 254 |
}; |
| 255 |
}; |
| 256 |
|
| 257 |
&pwm2 { |
| 258 |
status = "okay"; |
| 259 |
}; |
| 260 |
|
| 261 |
&sata1 { |
| 262 |
status = "okay"; |
| 263 |
}; |
| 264 |
|
| 265 |
&u2phy2 { |
| 266 |
status = "okay"; |
| 267 |
}; |
| 268 |
|
| 269 |
&u2phy3 { |
| 270 |
status = "okay"; |
| 271 |
}; |
| 272 |
|
| 273 |
&u2phy2_host { |
| 274 |
phy-supply = <&vcc5v0_usb_host1>; |
| 275 |
status = "okay"; |
| 276 |
}; |
| 277 |
|
| 278 |
&u2phy3_host { |
| 279 |
phy-supply = <&vcc5v0_usb_host2>; |
| 280 |
status = "okay"; |
| 281 |
}; |
| 282 |
|
| 283 |
&usb_host0_ehci { |
| 284 |
status = "okay"; |
| 285 |
}; |
| 286 |
|
| 287 |
&usb_host0_ohci { |
| 288 |
status = "okay"; |
| 289 |
}; |
| 290 |
|
| 291 |
&usb_host1_ehci { |
| 292 |
status = "okay"; |
| 293 |
}; |
| 294 |
|
| 295 |
&usb_host1_ohci { |
| 296 |
status = "okay"; |
| 297 |
}; |
| 298 |
|
| 299 |
&vop { |
| 300 |
status = "okay"; |
| 301 |
}; |
| 302 |
|
| 303 |
&vop_mmu { |
| 304 |
status = "okay"; |
| 305 |
}; |
| 306 |
|
| 307 |
&vp0 { |
| 308 |
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 309 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 310 |
remote-endpoint = <&hdmi0_in_vp0>; |
| 311 |
}; |
| 312 |
}; |
| 313 |
|
| 314 |
&vp1 { |
| 315 |
vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { |
| 316 |
reg = <ROCKCHIP_VOP2_EP_HDMI1>; |
| 317 |
remote-endpoint = <&hdmi1_in_vp1>; |
| 318 |
}; |
| 319 |
}; |