| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* DT-overlay to enable the onboard WiFi and Bluetooth module present in v1.2 |
| 4 |
* boards. Note that v1.1 boards use a different module, so this probably won't |
| 5 |
* work there. |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
/plugin/; |
| 10 |
|
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 13 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 14 |
|
| 15 |
&sdio { |
| 16 |
#address-cells = <1>; |
| 17 |
#size-cells = <0>; |
| 18 |
|
| 19 |
wifi@1 { |
| 20 |
compatible = "brcm,bcm4329-fmac"; |
| 21 |
reg = <1>; |
| 22 |
clock-names = "lpo"; |
| 23 |
clocks = <&hym8563>; |
| 24 |
interrupt-names = "host-wake"; |
| 25 |
interrupt-parent = <&gpio0>; |
| 26 |
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>; |
| 27 |
pinctrl-0 = <&wifi_wake_host>; |
| 28 |
pinctrl-names = "default"; |
| 29 |
}; |
| 30 |
}; |
| 31 |
|
| 32 |
&uart4 { |
| 33 |
status = "okay"; |
| 34 |
|
| 35 |
bluetooth { |
| 36 |
compatible = "brcm,bcm43438-bt"; |
| 37 |
clock-names = "lpo"; |
| 38 |
clocks = <&hym8563>; |
| 39 |
device-wakeup-gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>; |
| 40 |
interrupt-names = "host-wakeup"; |
| 41 |
interrupt-parent = <&gpio0>; |
| 42 |
interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>; |
| 43 |
pinctrl-0 = <&bt_reg_on>, <&bt_wake_host>, <&host_wake_bt>; |
| 44 |
pinctrl-names = "default"; |
| 45 |
shutdown-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; |
| 46 |
vbat-supply = <&vcc_3v3_s3>; |
| 47 |
vddio-supply = <&vcc_1v8_s3>; |
| 48 |
}; |
| 49 |
}; |