| 1 |
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) |
| 2 |
/* |
| 3 |
* Device tree for the WolfVision PF5 mainboard. |
| 4 |
* |
| 5 |
* Copyright (C) 2024 WolfVision GmbH. |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 11 |
#include <dt-bindings/regulator/ti,tps62864.h> |
| 12 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 13 |
#include "rk3568.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "WolfVision PF5"; |
| 17 |
compatible = "wolfvision,rk3568-pf5", "rockchip,rk3568"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
ethernet0 = &gmac0; |
| 21 |
mmc0 = &sdhci; |
| 22 |
rtc0 = &pcf85623; |
| 23 |
rtc1 = &rk809; |
| 24 |
}; |
| 25 |
|
| 26 |
chosen: chosen { |
| 27 |
stdout-path = "serial2:115200n8"; |
| 28 |
}; |
| 29 |
|
| 30 |
hdmi_tx: hdmi-tx-connector { |
| 31 |
compatible = "hdmi-connector"; |
| 32 |
hdmi-pwr-supply = <&hdmi_tx_5v>; |
| 33 |
type = "a"; |
| 34 |
|
| 35 |
port { |
| 36 |
hdmi_tx_in: endpoint { |
| 37 |
remote-endpoint = <&hdmi_tx_out>; |
| 38 |
}; |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
hdmi_tx_5v: regulator-hdmi-tx-5v { |
| 43 |
compatible = "regulator-fixed"; |
| 44 |
enable-active-high; |
| 45 |
gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; |
| 46 |
pinctrl-names = "default"; |
| 47 |
pinctrl-0 = <&hdmi_tx_5v_en>; |
| 48 |
regulator-name = "hdmi_tx_5v"; |
| 49 |
regulator-min-microvolt = <5000000>; |
| 50 |
regulator-max-microvolt = <5000000>; |
| 51 |
vin-supply = <&vcc5v_in>; |
| 52 |
}; |
| 53 |
|
| 54 |
pdm_codec: pdm-codec { |
| 55 |
compatible = "dmic-codec"; |
| 56 |
num-channels = <2>; |
| 57 |
#sound-dai-cells = <0>; |
| 58 |
}; |
| 59 |
|
| 60 |
pdm_sound: pdm-sound { |
| 61 |
compatible = "simple-audio-card"; |
| 62 |
simple-audio-card,name = "microphone"; |
| 63 |
|
| 64 |
simple-audio-card,cpu { |
| 65 |
sound-dai = <&pdm>; |
| 66 |
}; |
| 67 |
|
| 68 |
simple-audio-card,codec { |
| 69 |
sound-dai = <&pdm_codec>; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
vcc12v_cam: regulator-vcc12v-cam { |
| 74 |
compatible = "regulator-fixed"; |
| 75 |
enable-active-high; |
| 76 |
gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; |
| 77 |
pinctrl-names = "default"; |
| 78 |
pinctrl-0 = <&vcc12v_cam_en>; |
| 79 |
regulator-name = "12v_cam"; |
| 80 |
regulator-min-microvolt = <12000000>; |
| 81 |
regulator-max-microvolt = <12000000>; |
| 82 |
vin-supply = <&vcc12v_in>; |
| 83 |
}; |
| 84 |
|
| 85 |
vcc12v_in: regulator-vcc12v-in { |
| 86 |
compatible = "regulator-fixed"; |
| 87 |
regulator-name = "12v_in"; |
| 88 |
regulator-always-on; |
| 89 |
regulator-boot-on; |
| 90 |
regulator-min-microvolt = <12000000>; |
| 91 |
regulator-max-microvolt = <12000000>; |
| 92 |
}; |
| 93 |
|
| 94 |
vcc3v8_cam: regulator-vcc3v8-cam { |
| 95 |
compatible = "regulator-fixed"; |
| 96 |
enable-active-high; |
| 97 |
gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; |
| 98 |
pinctrl-names = "default"; |
| 99 |
pinctrl-0 = <&vcc3v8_cam_en>; |
| 100 |
regulator-name = "3v8_cam"; |
| 101 |
regulator-min-microvolt = <3800000>; |
| 102 |
regulator-max-microvolt = <3800000>; |
| 103 |
vin-supply = <&vcc5v_in>; |
| 104 |
}; |
| 105 |
|
| 106 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 107 |
compatible = "regulator-fixed"; |
| 108 |
regulator-name = "3v3_sys"; |
| 109 |
regulator-always-on; |
| 110 |
regulator-boot-on; |
| 111 |
regulator-min-microvolt = <3300000>; |
| 112 |
regulator-max-microvolt = <3300000>; |
| 113 |
vin-supply = <&vcc5v_in>; |
| 114 |
}; |
| 115 |
|
| 116 |
vcc5v_in: regulator-vcc5v-in { |
| 117 |
compatible = "regulator-fixed"; |
| 118 |
regulator-name = "5v_in"; |
| 119 |
regulator-always-on; |
| 120 |
regulator-boot-on; |
| 121 |
regulator-min-microvolt = <5000000>; |
| 122 |
regulator-max-microvolt = <5000000>; |
| 123 |
vin-supply = <&vcc12v_in>; |
| 124 |
}; |
| 125 |
}; |
| 126 |
|
| 127 |
&combphy0 { |
| 128 |
status = "okay"; |
| 129 |
}; |
| 130 |
|
| 131 |
&cpu0 { |
| 132 |
cpu-supply = <&vcc0v9_cpu>; |
| 133 |
}; |
| 134 |
|
| 135 |
&cpu1 { |
| 136 |
cpu-supply = <&vcc0v9_cpu>; |
| 137 |
}; |
| 138 |
|
| 139 |
&cpu2 { |
| 140 |
cpu-supply = <&vcc0v9_cpu>; |
| 141 |
}; |
| 142 |
|
| 143 |
&cpu3 { |
| 144 |
cpu-supply = <&vcc0v9_cpu>; |
| 145 |
}; |
| 146 |
|
| 147 |
&gpu { |
| 148 |
mali-supply = <&vcc0v9_gpu>; |
| 149 |
status = "okay"; |
| 150 |
}; |
| 151 |
|
| 152 |
&hdmi { |
| 153 |
avdd-0v9-supply = <&vcc0v9a_image>; |
| 154 |
avdd-1v8-supply = <&vcc1v8a_image>; |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&hdmi_in { |
| 159 |
hdmi_in_vp0: endpoint { |
| 160 |
remote-endpoint = <&vp0_out_hdmi>; |
| 161 |
}; |
| 162 |
}; |
| 163 |
|
| 164 |
&hdmi_out { |
| 165 |
hdmi_tx_out: endpoint { |
| 166 |
remote-endpoint = <&hdmi_tx_in>; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
&hdmi_sound { |
| 171 |
status = "okay"; |
| 172 |
}; |
| 173 |
|
| 174 |
&i2c0 { |
| 175 |
status = "okay"; |
| 176 |
|
| 177 |
rk809: pmic@20 { |
| 178 |
compatible = "rockchip,rk809"; |
| 179 |
reg = <0x20>; |
| 180 |
interrupt-parent = <&gpio0>; |
| 181 |
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; |
| 182 |
#clock-cells = <0>; |
| 183 |
pinctrl-names = "default"; |
| 184 |
pinctrl-0 = <&pmic_int_l>; |
| 185 |
system-power-controller; |
| 186 |
vcc1-supply = <&vcc5v_in>; |
| 187 |
vcc2-supply = <&vcc5v_in>; |
| 188 |
vcc3-supply = <&vcc5v_in>; |
| 189 |
vcc4-supply = <&vcc5v_in>; |
| 190 |
vcc5-supply = <&vcc3v3_sys>; |
| 191 |
vcc6-supply = <&vcc5v_in>; |
| 192 |
vcc7-supply = <&vcc3v3_sys>; |
| 193 |
vcc8-supply = <&vcc3v3_sys>; |
| 194 |
vcc9-supply = <&vcc3v3_sys>; |
| 195 |
wakeup-source; |
| 196 |
|
| 197 |
regulators { |
| 198 |
vcc0v9_logic: DCDC_REG1 { |
| 199 |
regulator-name = "0v9_logic"; |
| 200 |
regulator-always-on; |
| 201 |
regulator-boot-on; |
| 202 |
regulator-initial-mode = <0x2>; |
| 203 |
regulator-min-microvolt = <500000>; |
| 204 |
regulator-max-microvolt = <1350000>; |
| 205 |
regulator-ramp-delay = <6001>; |
| 206 |
|
| 207 |
regulator-state-mem { |
| 208 |
regulator-off-in-suspend; |
| 209 |
}; |
| 210 |
}; |
| 211 |
|
| 212 |
vcc0v9_gpu: DCDC_REG2 { |
| 213 |
regulator-name = "0v9_gpu"; |
| 214 |
regulator-always-on; |
| 215 |
regulator-initial-mode = <0x2>; |
| 216 |
regulator-min-microvolt = <500000>; |
| 217 |
regulator-max-microvolt = <1350000>; |
| 218 |
regulator-ramp-delay = <6001>; |
| 219 |
|
| 220 |
regulator-state-mem { |
| 221 |
regulator-off-in-suspend; |
| 222 |
}; |
| 223 |
}; |
| 224 |
|
| 225 |
vcc1v1_ddr4: DCDC_REG3 { |
| 226 |
regulator-name = "1v1_ddr4"; |
| 227 |
regulator-always-on; |
| 228 |
regulator-boot-on; |
| 229 |
regulator-initial-mode = <0x2>; |
| 230 |
|
| 231 |
regulator-state-mem { |
| 232 |
regulator-on-in-suspend; |
| 233 |
}; |
| 234 |
}; |
| 235 |
|
| 236 |
vcc0v9_npu: DCDC_REG4 { |
| 237 |
regulator-name = "0v9_npu"; |
| 238 |
regulator-always-on; |
| 239 |
regulator-initial-mode = <0x2>; |
| 240 |
regulator-min-microvolt = <900000>; |
| 241 |
regulator-max-microvolt = <1350000>; |
| 242 |
regulator-ramp-delay = <6001>; |
| 243 |
|
| 244 |
regulator-state-mem { |
| 245 |
regulator-off-in-suspend; |
| 246 |
}; |
| 247 |
}; |
| 248 |
|
| 249 |
vcc1v8: DCDC_REG5 { |
| 250 |
regulator-name = "1v8"; |
| 251 |
regulator-always-on; |
| 252 |
regulator-boot-on; |
| 253 |
regulator-min-microvolt = <1800000>; |
| 254 |
regulator-max-microvolt = <1800000>; |
| 255 |
|
| 256 |
regulator-state-mem { |
| 257 |
regulator-off-in-suspend; |
| 258 |
}; |
| 259 |
}; |
| 260 |
|
| 261 |
vcc0v9a_image: LDO_REG1 { |
| 262 |
regulator-name = "0v9a_image"; |
| 263 |
regulator-min-microvolt = <900000>; |
| 264 |
regulator-max-microvolt = <900000>; |
| 265 |
|
| 266 |
regulator-state-mem { |
| 267 |
regulator-off-in-suspend; |
| 268 |
}; |
| 269 |
}; |
| 270 |
|
| 271 |
vcc0v9a: LDO_REG2 { |
| 272 |
regulator-name = "0v9a"; |
| 273 |
regulator-always-on; |
| 274 |
regulator-boot-on; |
| 275 |
regulator-min-microvolt = <900000>; |
| 276 |
regulator-max-microvolt = <900000>; |
| 277 |
|
| 278 |
regulator-state-mem { |
| 279 |
regulator-off-in-suspend; |
| 280 |
}; |
| 281 |
}; |
| 282 |
|
| 283 |
vcc0v9a_pmu: LDO_REG3 { |
| 284 |
regulator-name = "0v9a_pmu"; |
| 285 |
regulator-always-on; |
| 286 |
regulator-boot-on; |
| 287 |
regulator-min-microvolt = <900000>; |
| 288 |
regulator-max-microvolt = <900000>; |
| 289 |
|
| 290 |
regulator-state-mem { |
| 291 |
regulator-on-in-suspend; |
| 292 |
regulator-suspend-microvolt = <900000>; |
| 293 |
}; |
| 294 |
}; |
| 295 |
|
| 296 |
vcc3v3_acodec: LDO_REG4 { |
| 297 |
regulator-name = "3v3_acodec"; |
| 298 |
regulator-always-on; |
| 299 |
regulator-min-microvolt = <3300000>; |
| 300 |
regulator-max-microvolt = <3300000>; |
| 301 |
|
| 302 |
regulator-state-mem { |
| 303 |
regulator-off-in-suspend; |
| 304 |
}; |
| 305 |
}; |
| 306 |
|
| 307 |
vcc3v3_sd: LDO_REG5 { |
| 308 |
regulator-name = "3v3_sd"; |
| 309 |
regulator-always-on; |
| 310 |
regulator-boot-on; |
| 311 |
regulator-min-microvolt = <3300000>; |
| 312 |
regulator-max-microvolt = <3300000>; |
| 313 |
|
| 314 |
regulator-state-mem { |
| 315 |
regulator-off-in-suspend; |
| 316 |
}; |
| 317 |
}; |
| 318 |
|
| 319 |
vcc3v3_pmu: LDO_REG6 { |
| 320 |
regulator-name = "3v3_pmu"; |
| 321 |
regulator-always-on; |
| 322 |
regulator-boot-on; |
| 323 |
regulator-min-microvolt = <3300000>; |
| 324 |
regulator-max-microvolt = <3300000>; |
| 325 |
|
| 326 |
regulator-state-mem { |
| 327 |
regulator-on-in-suspend; |
| 328 |
regulator-suspend-microvolt = <3300000>; |
| 329 |
}; |
| 330 |
}; |
| 331 |
|
| 332 |
vcc1v8a: LDO_REG7 { |
| 333 |
regulator-name = "1v8a"; |
| 334 |
regulator-always-on; |
| 335 |
regulator-boot-on; |
| 336 |
regulator-min-microvolt = <1800000>; |
| 337 |
regulator-max-microvolt = <1800000>; |
| 338 |
|
| 339 |
regulator-state-mem { |
| 340 |
regulator-off-in-suspend; |
| 341 |
}; |
| 342 |
}; |
| 343 |
|
| 344 |
vcc1v8a_pmu: LDO_REG8 { |
| 345 |
regulator-name = "1v8a_pmu"; |
| 346 |
regulator-always-on; |
| 347 |
regulator-boot-on; |
| 348 |
regulator-min-microvolt = <1800000>; |
| 349 |
regulator-max-microvolt = <1800000>; |
| 350 |
|
| 351 |
regulator-state-mem { |
| 352 |
regulator-on-in-suspend; |
| 353 |
regulator-suspend-microvolt = <1800000>; |
| 354 |
}; |
| 355 |
}; |
| 356 |
|
| 357 |
vcc1v8a_image: LDO_REG9 { |
| 358 |
regulator-name = "1v8a_image"; |
| 359 |
regulator-min-microvolt = <1800000>; |
| 360 |
regulator-max-microvolt = <1800000>; |
| 361 |
|
| 362 |
regulator-state-mem { |
| 363 |
regulator-off-in-suspend; |
| 364 |
}; |
| 365 |
}; |
| 366 |
|
| 367 |
vcc3v3_sw: SWITCH_REG1 { |
| 368 |
regulator-name = "3v3_sw"; |
| 369 |
regulator-always-on; |
| 370 |
regulator-boot-on; |
| 371 |
regulator-min-microvolt = <3300000>; |
| 372 |
regulator-max-microvolt = <3300000>; |
| 373 |
|
| 374 |
regulator-state-mem { |
| 375 |
regulator-off-in-suspend; |
| 376 |
}; |
| 377 |
}; |
| 378 |
}; |
| 379 |
}; |
| 380 |
|
| 381 |
regulator@42 { |
| 382 |
compatible = "ti,tps62869"; |
| 383 |
reg = <0x42>; |
| 384 |
|
| 385 |
regulators { |
| 386 |
vcc0v9_cpu: SW { |
| 387 |
regulator-name = "0v9_cpu"; |
| 388 |
regulator-always-on; |
| 389 |
regulator-boot-on; |
| 390 |
regulator-initial-mode = <TPS62864_MODE_FPWM>; |
| 391 |
regulator-min-microvolt = <900000>; |
| 392 |
regulator-max-microvolt = <1150000>; |
| 393 |
vin-supply = <&vcc5v_in>; |
| 394 |
|
| 395 |
regulator-state-mem { |
| 396 |
regulator-off-in-suspend; |
| 397 |
}; |
| 398 |
}; |
| 399 |
}; |
| 400 |
}; |
| 401 |
|
| 402 |
pcf85623: rtc@51 { |
| 403 |
compatible = "nxp,pcf85263"; |
| 404 |
reg = <0x51>; |
| 405 |
pinctrl-names = "default"; |
| 406 |
pinctrl-0 = <&clk32k_in>; |
| 407 |
quartz-load-femtofarads = <12500>; |
| 408 |
}; |
| 409 |
}; |
| 410 |
|
| 411 |
&i2c3 { |
| 412 |
pinctrl-names = "default"; |
| 413 |
pinctrl-0 = <&i2c3m0_xfer>; |
| 414 |
}; |
| 415 |
|
| 416 |
&i2c4 { |
| 417 |
pinctrl-names = "default"; |
| 418 |
pinctrl-0 = <&i2c4m1_xfer>; |
| 419 |
}; |
| 420 |
|
| 421 |
&i2s0_8ch { |
| 422 |
status = "okay"; |
| 423 |
}; |
| 424 |
|
| 425 |
&pdm { |
| 426 |
pinctrl-0 = <&pdmm0_clk |
| 427 |
&pdmm0_sdi0>; |
| 428 |
status = "okay"; |
| 429 |
}; |
| 430 |
|
| 431 |
&pinctrl { |
| 432 |
cam { |
| 433 |
vcc12v_cam_en: vcc12v-cam-en-pinctrl { |
| 434 |
rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 435 |
}; |
| 436 |
|
| 437 |
vcc3v8_cam_en: vcc3v8-cam-en-pinctrl { |
| 438 |
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 439 |
}; |
| 440 |
}; |
| 441 |
|
| 442 |
hdmitx { |
| 443 |
hdmi_tx_5v_en: hdmi-tx-5v-en-pinctrl { |
| 444 |
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 445 |
}; |
| 446 |
}; |
| 447 |
|
| 448 |
pmic { |
| 449 |
pmic_int_l: pmic-int-l-pinctrl { |
| 450 |
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 451 |
}; |
| 452 |
}; |
| 453 |
}; |
| 454 |
|
| 455 |
&pmu_io_domains { |
| 456 |
pmuio1-supply = <&vcc3v3_pmu>; |
| 457 |
pmuio2-supply = <&vcc3v3_pmu>; |
| 458 |
vccio1-supply = <&vcc3v3_acodec>; |
| 459 |
vccio2-supply = <&vcc1v8>; |
| 460 |
vccio3-supply = <&vcc3v3_sd>; |
| 461 |
vccio4-supply = <&vcc1v8>; |
| 462 |
vccio5-supply = <&vcc1v8>; |
| 463 |
vccio6-supply = <&vcc3v3_sw>; |
| 464 |
vccio7-supply = <&vcc3v3_sw>; |
| 465 |
status = "okay"; |
| 466 |
}; |
| 467 |
|
| 468 |
&saradc { |
| 469 |
vref-supply = <&vcc1v8a>; |
| 470 |
status = "okay"; |
| 471 |
}; |
| 472 |
|
| 473 |
&sdhci { |
| 474 |
bus-width = <8>; |
| 475 |
max-frequency = <200000000>; |
| 476 |
non-removable; |
| 477 |
pinctrl-names = "default"; |
| 478 |
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; |
| 479 |
vmmc-supply = <&vcc3v3_sw>; |
| 480 |
vqmmc-supply = <&vcc1v8>; |
| 481 |
status = "okay"; |
| 482 |
}; |
| 483 |
|
| 484 |
&tsadc { |
| 485 |
rockchip,hw-tshut-mode = <1>; |
| 486 |
rockchip,hw-tshut-polarity = <0>; |
| 487 |
status = "okay"; |
| 488 |
}; |
| 489 |
|
| 490 |
&uart2 { |
| 491 |
status = "okay"; |
| 492 |
}; |
| 493 |
|
| 494 |
&usb_host0_xhci { |
| 495 |
dr_mode = "peripheral"; |
| 496 |
/* The following quirks are required since the bInterval is 1 and we |
| 497 |
* handle steady ISOC streaming. See Usecase 3 in commit 729dcffd1ed3 |
| 498 |
* ("usb: dwc3: gadget: Add support for disabling U1 and U2 entries"). |
| 499 |
*/ |
| 500 |
snps,dis-u1-entry-quirk; |
| 501 |
snps,dis-u2-entry-quirk; |
| 502 |
/* |
| 503 |
* Without this quirk the available fifosize seems to be miscalculated |
| 504 |
* in cases where many endpoints are used. In one particular situation |
| 505 |
* 8 IN EPs and 3 OUT EPs where selected and lead to stalled transfers |
| 506 |
* without the resize quirk. |
| 507 |
*/ |
| 508 |
tx-fifo-resize; |
| 509 |
|
| 510 |
status = "okay"; |
| 511 |
}; |
| 512 |
|
| 513 |
&usb2phy0 { |
| 514 |
status = "okay"; |
| 515 |
}; |
| 516 |
|
| 517 |
&usb2phy0_otg { |
| 518 |
status = "okay"; |
| 519 |
}; |
| 520 |
|
| 521 |
&vop { |
| 522 |
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP2>; |
| 523 |
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 524 |
status = "okay"; |
| 525 |
}; |
| 526 |
|
| 527 |
&vop_mmu { |
| 528 |
status = "okay"; |
| 529 |
}; |
| 530 |
|
| 531 |
&vp0 { |
| 532 |
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 533 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 534 |
remote-endpoint = <&hdmi_in_vp0>; |
| 535 |
}; |
| 536 |
}; |