| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
#include "rk3568-radxa-cm3i.dtsi" |
| 5 |
|
| 6 |
/ { |
| 7 |
model = "Radxa E25 Carrier Board"; |
| 8 |
compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568"; |
| 9 |
|
| 10 |
aliases { |
| 11 |
mmc1 = &sdmmc0; |
| 12 |
}; |
| 13 |
|
| 14 |
pwm-leds { |
| 15 |
compatible = "pwm-leds-multicolor"; |
| 16 |
|
| 17 |
multi-led { |
| 18 |
color = <LED_COLOR_ID_RGB>; |
| 19 |
function = LED_FUNCTION_STATUS; |
| 20 |
max-brightness = <255>; |
| 21 |
|
| 22 |
led-red { |
| 23 |
color = <LED_COLOR_ID_RED>; |
| 24 |
pwms = <&pwm1 0 1000000 0>; |
| 25 |
}; |
| 26 |
|
| 27 |
led-green { |
| 28 |
color = <LED_COLOR_ID_GREEN>; |
| 29 |
pwms = <&pwm2 0 1000000 0>; |
| 30 |
}; |
| 31 |
|
| 32 |
led-blue { |
| 33 |
color = <LED_COLOR_ID_BLUE>; |
| 34 |
pwms = <&pwm12 0 1000000 0>; |
| 35 |
}; |
| 36 |
}; |
| 37 |
}; |
| 38 |
|
| 39 |
vbus_typec: regulator-vbus-typec { |
| 40 |
compatible = "regulator-fixed"; |
| 41 |
enable-active-high; |
| 42 |
gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 43 |
pinctrl-names = "default"; |
| 44 |
pinctrl-0 = <&vbus_typec_en>; |
| 45 |
regulator-name = "vbus_typec"; |
| 46 |
regulator-min-microvolt = <5000000>; |
| 47 |
regulator-max-microvolt = <5000000>; |
| 48 |
vin-supply = <&vcc5v0_sys>; |
| 49 |
}; |
| 50 |
|
| 51 |
/* actually fed by vcc5v0_sys, dependent |
| 52 |
* on pi6c clock generator |
| 53 |
*/ |
| 54 |
vcc3v3_minipcie: regulator-vcc3v3-minipcie { |
| 55 |
compatible = "regulator-fixed"; |
| 56 |
enable-active-high; |
| 57 |
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; |
| 58 |
pinctrl-names = "default"; |
| 59 |
pinctrl-0 = <&minipcie_enable_h>; |
| 60 |
regulator-name = "vcc3v3_minipcie"; |
| 61 |
regulator-min-microvolt = <3300000>; |
| 62 |
regulator-max-microvolt = <3300000>; |
| 63 |
vin-supply = <&vcc3v3_pi6c_05>; |
| 64 |
}; |
| 65 |
|
| 66 |
vcc3v3_ngff: regulator-vcc3v3-ngff { |
| 67 |
compatible = "regulator-fixed"; |
| 68 |
enable-active-high; |
| 69 |
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; |
| 70 |
pinctrl-names = "default"; |
| 71 |
pinctrl-0 = <&ngffpcie_enable_h>; |
| 72 |
regulator-name = "vcc3v3_ngff"; |
| 73 |
regulator-min-microvolt = <3300000>; |
| 74 |
regulator-max-microvolt = <3300000>; |
| 75 |
vin-supply = <&vcc5v0_sys>; |
| 76 |
}; |
| 77 |
|
| 78 |
vcc3v3_pcie30x1: regulator-vcc3v3-pcie30x1 { |
| 79 |
compatible = "regulator-fixed"; |
| 80 |
enable-active-high; |
| 81 |
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; |
| 82 |
pinctrl-names = "default"; |
| 83 |
pinctrl-0 = <&pcie30x1_enable_h>; |
| 84 |
regulator-name = "vcc3v3_pcie30x1"; |
| 85 |
regulator-min-microvolt = <3300000>; |
| 86 |
regulator-max-microvolt = <3300000>; |
| 87 |
vin-supply = <&vcc5v0_sys>; |
| 88 |
}; |
| 89 |
|
| 90 |
vcc3v3_pi6c_05: regulator-vcc3v3-pi6c-05 { |
| 91 |
compatible = "regulator-fixed"; |
| 92 |
enable-active-high; |
| 93 |
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; |
| 94 |
pinctrl-names = "default"; |
| 95 |
pinctrl-0 = <&pcie_enable_h>; |
| 96 |
regulator-name = "vcc3v3_pcie"; |
| 97 |
regulator-min-microvolt = <3300000>; |
| 98 |
regulator-max-microvolt = <3300000>; |
| 99 |
vin-supply = <&vcc5v0_sys>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
&combphy1 { |
| 104 |
phy-supply = <&vcc3v3_pcie30x1>; |
| 105 |
}; |
| 106 |
|
| 107 |
&display_subsystem { |
| 108 |
status = "disabled"; |
| 109 |
}; |
| 110 |
|
| 111 |
&pcie2x1 { |
| 112 |
pinctrl-names = "default"; |
| 113 |
pinctrl-0 = <&pcie20_reset_h>; |
| 114 |
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; |
| 115 |
vpcie3v3-supply = <&vcc3v3_pi6c_05>; |
| 116 |
status = "okay"; |
| 117 |
}; |
| 118 |
|
| 119 |
&pcie30phy { |
| 120 |
data-lanes = <1 2>; |
| 121 |
status = "okay"; |
| 122 |
}; |
| 123 |
|
| 124 |
&pcie3x1 { |
| 125 |
num-lanes = <1>; |
| 126 |
pinctrl-names = "default"; |
| 127 |
pinctrl-0 = <&pcie30x1_reset_h>; |
| 128 |
reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; |
| 129 |
vpcie3v3-supply = <&vcc3v3_minipcie>; |
| 130 |
status = "okay"; |
| 131 |
}; |
| 132 |
|
| 133 |
&pcie3x2 { |
| 134 |
num-lanes = <1>; |
| 135 |
pinctrl-names = "default"; |
| 136 |
pinctrl-0 = <&pcie30x2_reset_h>; |
| 137 |
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; |
| 138 |
vpcie3v3-supply = <&vcc3v3_pi6c_05>; |
| 139 |
status = "okay"; |
| 140 |
}; |
| 141 |
|
| 142 |
&pinctrl { |
| 143 |
pcie { |
| 144 |
pcie20_reset_h: pcie20-reset-h { |
| 145 |
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 146 |
}; |
| 147 |
|
| 148 |
pcie30x1_enable_h: pcie30x1-enable-h { |
| 149 |
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 150 |
}; |
| 151 |
|
| 152 |
pcie30x1_reset_h: pcie30x1-reset-h { |
| 153 |
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 154 |
}; |
| 155 |
|
| 156 |
pcie30x2_reset_h: pcie30x2-reset-h { |
| 157 |
rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 158 |
}; |
| 159 |
|
| 160 |
pcie_enable_h: pcie-enable-h { |
| 161 |
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 162 |
}; |
| 163 |
}; |
| 164 |
|
| 165 |
usb { |
| 166 |
minipcie_enable_h: minipcie-enable-h { |
| 167 |
rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 168 |
}; |
| 169 |
|
| 170 |
ngffpcie_enable_h: ngffpcie-enable-h { |
| 171 |
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 172 |
}; |
| 173 |
|
| 174 |
vbus_typec_en: vbus_typec_en { |
| 175 |
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 176 |
}; |
| 177 |
}; |
| 178 |
}; |
| 179 |
|
| 180 |
&pwm1 { |
| 181 |
status = "okay"; |
| 182 |
}; |
| 183 |
|
| 184 |
&pwm2 { |
| 185 |
status = "okay"; |
| 186 |
}; |
| 187 |
|
| 188 |
&pwm12 { |
| 189 |
pinctrl-names = "default"; |
| 190 |
pinctrl-0 = <&pwm12m1_pins>; |
| 191 |
status = "okay"; |
| 192 |
}; |
| 193 |
|
| 194 |
&sata1 { |
| 195 |
status = "okay"; |
| 196 |
}; |
| 197 |
|
| 198 |
&sdmmc0 { |
| 199 |
bus-width = <4>; |
| 200 |
cap-sd-highspeed; |
| 201 |
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 202 |
/* Also used in pcie30x1_clkreqnm0 */ |
| 203 |
disable-wp; |
| 204 |
pinctrl-names = "default"; |
| 205 |
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>; |
| 206 |
sd-uhs-sdr104; |
| 207 |
vmmc-supply = <&vcc3v3_sd>; |
| 208 |
vqmmc-supply = <&vccio_sd>; |
| 209 |
status = "okay"; |
| 210 |
}; |
| 211 |
|
| 212 |
&usb_host0_ehci { |
| 213 |
status = "okay"; |
| 214 |
}; |
| 215 |
|
| 216 |
&usb_host0_ohci { |
| 217 |
status = "okay"; |
| 218 |
}; |
| 219 |
|
| 220 |
&usb_host0_xhci { |
| 221 |
status = "okay"; |
| 222 |
}; |
| 223 |
|
| 224 |
&usb_host1_ehci { |
| 225 |
status = "okay"; |
| 226 |
}; |
| 227 |
|
| 228 |
&usb_host1_ohci { |
| 229 |
status = "okay"; |
| 230 |
}; |
| 231 |
|
| 232 |
&usb2phy0_otg { |
| 233 |
phy-supply = <&vbus_typec>; |
| 234 |
status = "okay"; |
| 235 |
}; |
| 236 |
|
| 237 |
&usb2phy1_host { |
| 238 |
phy-supply = <&vcc3v3_minipcie>; |
| 239 |
status = "okay"; |
| 240 |
}; |
| 241 |
|
| 242 |
&usb2phy1_otg { |
| 243 |
phy-supply = <&vcc3v3_ngff>; |
| 244 |
status = "okay"; |
| 245 |
}; |