Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3568-radxa-cm3j-rpi-cm4.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2025 Radxa Computer (Shenzhen) Co., Ltd.
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/pinctrl/rockchip.h>
11 #include "rk3568-radxa-cm3j.dtsi"
12
13 / {
14 model = "Radxa CM3J on RPi CM4 IO Board";
15 compatible = "radxa,cm3j-rpi-cm4", "radxa,cm3j", "rockchip,rk3568";
16
17 aliases {
18 ethernet0 = &gmac1;
19 mmc1 = &sdmmc0;
20 rtc0 = &pcf85063;
21 };
22
23 chosen {
24 stdout-path = "serial2:1500000n8";
25 };
26
27 hdmi-con {
28 compatible = "hdmi-connector";
29 type = "a";
30
31 port {
32 hdmi_con_in: endpoint {
33 remote-endpoint = <&hdmi_out_con>;
34 };
35 };
36 };
37
38 leds-1 {
39 compatible = "gpio-leds";
40
41 led-1 {
42 color = <LED_COLOR_ID_RED>;
43 default-state = "on";
44 function = LED_FUNCTION_POWER;
45 gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>;
46 pinctrl-names = "default";
47 pinctrl-0 = <&npwr_led>;
48 };
49
50 led-2 {
51 color = <LED_COLOR_ID_GREEN>;
52 default-state = "on";
53 function = LED_FUNCTION_STATUS;
54 gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
55 linux,default-trigger = "heartbeat";
56 pinctrl-names = "default";
57 pinctrl-0 = <&pi_nled_activity>;
58 };
59 };
60
61 dc12v: regulator-12v0 {
62 compatible = "regulator-fixed";
63 regulator-name = "dc12v";
64 regulator-always-on;
65 regulator-boot-on;
66 regulator-min-microvolt = <12000000>;
67 regulator-max-microvolt = <12000000>;
68 };
69
70 dc3v3_pcie: regulator-3v3-2 {
71 compatible = "regulator-fixed";
72 regulator-name = "dc3v3_pcie";
73 regulator-always-on;
74 regulator-boot-on;
75 regulator-min-microvolt = <3300000>;
76 regulator-max-microvolt = <3300000>;
77 vin-supply = <&dc12v>;
78 };
79
80 gpio_vref: regulator-3v3-3 {
81 compatible = "regulator-fixed";
82 regulator-name = "gpio_vref";
83 regulator-always-on;
84 regulator-boot-on;
85 regulator-min-microvolt = <3300000>;
86 regulator-max-microvolt = <3300000>;
87 vin-supply = <&dc3v3>;
88 };
89
90 dc5v: regulator-5v0 {
91 compatible = "regulator-fixed";
92 regulator-name = "dc5v";
93 regulator-always-on;
94 regulator-boot-on;
95 regulator-min-microvolt = <5000000>;
96 regulator-max-microvolt = <5000000>;
97 vin-supply = <&dc12v>;
98 };
99 };
100
101 &combphy0 {
102 status = "okay";
103 };
104
105 &combphy2 {
106 status = "okay";
107 };
108
109 &gmac1 {
110 status = "okay";
111 };
112
113 &gpio0 {
114 nextrst-hog {
115 gpio-hog;
116 /*
117 * GPIO_ACTIVE_LOW + output-low here means that the pin is set
118 * to high, because output-low decides the value pre-inversion.
119 */
120 gpios = <RK_PC0 GPIO_ACTIVE_LOW>;
121 line-name = "nEXTRST";
122 output-low;
123 };
124 };
125
126 &hdmi {
127 status = "okay";
128 };
129
130 &hdmi_sound {
131 status = "okay";
132 };
133
134 &i2c0 {
135 emc2301: fan-controller@2f {
136 compatible = "microchip,emc2301", "microchip,emc2305";
137 reg = <0x2f>;
138 #address-cells = <1>;
139 #size-cells = <0>;
140 #pwm-cells = <3>;
141
142 fan@0 {
143 reg = <0x0>;
144 pwms = <&emc2301 26000 0 1>;
145 #cooling-cells = <2>;
146 };
147 };
148
149 pcf85063: rtc@51 {
150 compatible = "nxp,pcf85063a";
151 reg = <0x51>;
152 wakeup-source;
153 };
154 };
155
156 &i2s0_8ch {
157 status = "okay";
158 };
159
160 &pinctrl {
161 leds {
162 npwr_led: npwr-led {
163 rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
164 };
165
166 pi_nled_activity: pi-nled-activity {
167 rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
168 };
169 };
170 };
171
172 &pcie2x1 {
173 vpcie3v3-supply = <&dc3v3_pcie>;
174 status = "okay";
175 };
176
177 &sdmmc0 {
178 bus-width = <4>;
179 cap-sd-highspeed;
180 broken-cd;
181 disable-wp;
182 no-mmc;
183 no-sdio;
184 pinctrl-names = "default";
185 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
186 vmmc-supply = <&dc3v3>;
187 status = "okay";
188 };
189
190 &uart2 {
191 status = "okay";
192 };
193
194 &usb2phy0 {
195 status = "okay";
196 };
197
198 &usb2phy0_otg {
199 status = "okay";
200 };
201
202 &usb_host0_xhci {
203 status = "okay";
204 };