| 1 |
#include <dt-bindings/input/input.h> |
| 2 |
#include <dt-bindings/leds/common.h> |
| 3 |
#include <dt-bindings/gpio/gpio.h> |
| 4 |
|
| 5 |
/ { |
| 6 |
aliases { |
| 7 |
mmc0 = &sdhci; |
| 8 |
rtc0 = &rtc_rv8263; |
| 9 |
}; |
| 10 |
|
| 11 |
chosen { |
| 12 |
stdout-path = "serial2:115200n8"; |
| 13 |
}; |
| 14 |
|
| 15 |
keys: keys { |
| 16 |
compatible = "gpio-keys"; |
| 17 |
pinctrl-0 = <&reset_button_pin>; |
| 18 |
pinctrl-names = "default"; |
| 19 |
|
| 20 |
key-reset { |
| 21 |
label = "reset"; |
| 22 |
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>; |
| 23 |
linux,code = <KEY_RESTART>; |
| 24 |
}; |
| 25 |
}; |
| 26 |
|
| 27 |
leds: leds { |
| 28 |
compatible = "gpio-leds"; |
| 29 |
|
| 30 |
led-0 { |
| 31 |
color = <LED_COLOR_ID_GREEN>; |
| 32 |
function = LED_FUNCTION_DISK; |
| 33 |
gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; |
| 34 |
label = "hdd1:green:disk"; |
| 35 |
linux,default-trigger = "disk-activity"; |
| 36 |
pinctrl-names = "default"; |
| 37 |
pinctrl-0 = <&hdd1_led_pin>; |
| 38 |
}; |
| 39 |
}; |
| 40 |
|
| 41 |
dc_12v: regulator-dc-12v { |
| 42 |
compatible = "regulator-fixed"; |
| 43 |
regulator-name = "dc_12v"; |
| 44 |
regulator-always-on; |
| 45 |
regulator-boot-on; |
| 46 |
regulator-min-microvolt = <12000000>; |
| 47 |
regulator-max-microvolt = <12000000>; |
| 48 |
}; |
| 49 |
|
| 50 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 51 |
compatible = "regulator-fixed"; |
| 52 |
regulator-name = "vcc3v3_sys"; |
| 53 |
regulator-always-on; |
| 54 |
regulator-boot-on; |
| 55 |
regulator-min-microvolt = <3300000>; |
| 56 |
regulator-max-microvolt = <3300000>; |
| 57 |
vin-supply = <&dc_12v>; |
| 58 |
}; |
| 59 |
|
| 60 |
vcc5v0_host: regulator-vcc5v0-host { |
| 61 |
compatible = "regulator-fixed"; |
| 62 |
enable-active-high; |
| 63 |
pinctrl-names = "default"; |
| 64 |
pinctrl-0 = <&vcc5v0_host_en>; |
| 65 |
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| 66 |
regulator-name = "vcc5v0_host"; |
| 67 |
regulator-always-on; |
| 68 |
regulator-boot-on; |
| 69 |
regulator-min-microvolt = <5000000>; |
| 70 |
regulator-max-microvolt = <5000000>; |
| 71 |
vin-supply = <&vcc5v0_usb>; |
| 72 |
}; |
| 73 |
|
| 74 |
vcc5v0_otg: regulator-vcc5v0-otg { |
| 75 |
compatible = "regulator-fixed"; |
| 76 |
enable-active-high; |
| 77 |
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 78 |
pinctrl-names = "default"; |
| 79 |
pinctrl-0 = <&vcc5v0_otg_en>; |
| 80 |
regulator-name = "vcc5v0_otg"; |
| 81 |
regulator-always-on; |
| 82 |
regulator-boot-on; |
| 83 |
regulator-min-microvolt = <5000000>; |
| 84 |
regulator-max-microvolt = <5000000>; |
| 85 |
vin-supply = <&vcc5v0_usb>; |
| 86 |
}; |
| 87 |
|
| 88 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 89 |
compatible = "regulator-fixed"; |
| 90 |
regulator-name = "vcc5v0_sys"; |
| 91 |
regulator-always-on; |
| 92 |
regulator-boot-on; |
| 93 |
regulator-min-microvolt = <5000000>; |
| 94 |
regulator-max-microvolt = <5000000>; |
| 95 |
vin-supply = <&dc_12v>; |
| 96 |
}; |
| 97 |
|
| 98 |
vcc5v0_usb: regulator-vcc5v0-usb { |
| 99 |
compatible = "regulator-fixed"; |
| 100 |
regulator-name = "vcc5v0_usb"; |
| 101 |
regulator-always-on; |
| 102 |
regulator-boot-on; |
| 103 |
regulator-min-microvolt = <5000000>; |
| 104 |
regulator-max-microvolt = <5000000>; |
| 105 |
vin-supply = <&dc_12v>; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
/* Connected USB3 on TS133 / SATA1 on all the others */ |
| 110 |
&combphy1 { |
| 111 |
status = "okay"; |
| 112 |
}; |
| 113 |
|
| 114 |
/* Connected to SATA2 */ |
| 115 |
&combphy2 { |
| 116 |
status = "okay"; |
| 117 |
}; |
| 118 |
|
| 119 |
&cpu0 { |
| 120 |
cpu-supply = <&vdd_cpu>; |
| 121 |
}; |
| 122 |
|
| 123 |
&cpu1 { |
| 124 |
cpu-supply = <&vdd_cpu>; |
| 125 |
}; |
| 126 |
|
| 127 |
&cpu2 { |
| 128 |
cpu-supply = <&vdd_cpu>; |
| 129 |
}; |
| 130 |
|
| 131 |
&cpu3 { |
| 132 |
cpu-supply = <&vdd_cpu>; |
| 133 |
}; |
| 134 |
|
| 135 |
/* |
| 136 |
* The MCU can provide system temperature too, but only by polling and of |
| 137 |
* course also cannot set trip points. So attach to the cpu thermal-zone |
| 138 |
* instead to control the fan. |
| 139 |
*/ |
| 140 |
&cpu_thermal { |
| 141 |
trips { |
| 142 |
case_fan0: case-fan0 { |
| 143 |
hysteresis = <2000>; |
| 144 |
temperature = <35000>; |
| 145 |
type = "active"; |
| 146 |
}; |
| 147 |
|
| 148 |
case_fan1: case-fan1 { |
| 149 |
hysteresis = <2000>; |
| 150 |
temperature = <45000>; |
| 151 |
type = "active"; |
| 152 |
}; |
| 153 |
|
| 154 |
case_fan2: case-fan2 { |
| 155 |
hysteresis = <2000>; |
| 156 |
temperature = <65000>; |
| 157 |
type = "active"; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
cooling-maps { |
| 162 |
/* |
| 163 |
* Always provide some air movement, due to small case |
| 164 |
* full of harddrives. |
| 165 |
*/ |
| 166 |
map1 { |
| 167 |
cooling-device = <&fan THERMAL_NO_LIMIT 1>; |
| 168 |
trip = <&case_fan0>; |
| 169 |
}; |
| 170 |
|
| 171 |
map2 { |
| 172 |
cooling-device = <&fan 2 3>; |
| 173 |
trip = <&case_fan1>; |
| 174 |
}; |
| 175 |
|
| 176 |
map3 { |
| 177 |
cooling-device = <&fan 4 THERMAL_NO_LIMIT>; |
| 178 |
trip = <&case_fan2>; |
| 179 |
}; |
| 180 |
}; |
| 181 |
}; |
| 182 |
|
| 183 |
&gpu { |
| 184 |
mali-supply = <&vdd_gpu>; |
| 185 |
status = "okay"; |
| 186 |
}; |
| 187 |
|
| 188 |
&i2c0 { |
| 189 |
status = "okay"; |
| 190 |
|
| 191 |
pmic@20 { |
| 192 |
compatible = "rockchip,rk809"; |
| 193 |
reg = <0x20>; |
| 194 |
interrupt-parent = <&gpio0>; |
| 195 |
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; |
| 196 |
#clock-cells = <1>; |
| 197 |
pinctrl-names = "default"; |
| 198 |
pinctrl-0 = <&pmic_int_l>; |
| 199 |
system-power-controller; |
| 200 |
vcc1-supply = <&vcc3v3_sys>; |
| 201 |
vcc2-supply = <&vcc3v3_sys>; |
| 202 |
vcc3-supply = <&vcc3v3_sys>; |
| 203 |
vcc4-supply = <&vcc3v3_sys>; |
| 204 |
vcc5-supply = <&vcc3v3_sys>; |
| 205 |
vcc6-supply = <&vcc3v3_sys>; |
| 206 |
vcc7-supply = <&vcc3v3_sys>; |
| 207 |
vcc8-supply = <&vcc3v3_sys>; |
| 208 |
vcc9-supply = <&vcc3v3_sys>; |
| 209 |
wakeup-source; |
| 210 |
|
| 211 |
regulators { |
| 212 |
vdd_logic: DCDC_REG1 { |
| 213 |
regulator-name = "vdd_logic"; |
| 214 |
regulator-always-on; |
| 215 |
regulator-boot-on; |
| 216 |
regulator-initial-mode = <0x2>; |
| 217 |
regulator-min-microvolt = <500000>; |
| 218 |
regulator-max-microvolt = <1350000>; |
| 219 |
regulator-ramp-delay = <6001>; |
| 220 |
|
| 221 |
regulator-state-mem { |
| 222 |
regulator-off-in-suspend; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
vdd_gpu: DCDC_REG2 { |
| 227 |
regulator-name = "vdd_gpu"; |
| 228 |
regulator-always-on; |
| 229 |
regulator-initial-mode = <0x2>; |
| 230 |
regulator-min-microvolt = <500000>; |
| 231 |
regulator-max-microvolt = <1350000>; |
| 232 |
regulator-ramp-delay = <6001>; |
| 233 |
|
| 234 |
regulator-state-mem { |
| 235 |
regulator-off-in-suspend; |
| 236 |
}; |
| 237 |
}; |
| 238 |
|
| 239 |
vcc_ddr: DCDC_REG3 { |
| 240 |
regulator-name = "vcc_ddr"; |
| 241 |
regulator-always-on; |
| 242 |
regulator-boot-on; |
| 243 |
regulator-initial-mode = <0x2>; |
| 244 |
|
| 245 |
regulator-state-mem { |
| 246 |
regulator-on-in-suspend; |
| 247 |
}; |
| 248 |
}; |
| 249 |
|
| 250 |
vdd_npu: DCDC_REG4 { |
| 251 |
regulator-name = "vdd_npu"; |
| 252 |
regulator-initial-mode = <0x2>; |
| 253 |
regulator-min-microvolt = <500000>; |
| 254 |
regulator-max-microvolt = <1350000>; |
| 255 |
regulator-ramp-delay = <6001>; |
| 256 |
|
| 257 |
regulator-state-mem { |
| 258 |
regulator-off-in-suspend; |
| 259 |
}; |
| 260 |
}; |
| 261 |
|
| 262 |
vcc_1v8: DCDC_REG5 { |
| 263 |
regulator-name = "vcc_1v8"; |
| 264 |
regulator-always-on; |
| 265 |
regulator-boot-on; |
| 266 |
regulator-min-microvolt = <1800000>; |
| 267 |
regulator-max-microvolt = <1800000>; |
| 268 |
|
| 269 |
regulator-state-mem { |
| 270 |
regulator-off-in-suspend; |
| 271 |
}; |
| 272 |
}; |
| 273 |
|
| 274 |
vdda0v9_image: LDO_REG1 { |
| 275 |
regulator-name = "vdda0v9_image"; |
| 276 |
regulator-always-on; |
| 277 |
regulator-min-microvolt = <900000>; |
| 278 |
regulator-max-microvolt = <900000>; |
| 279 |
|
| 280 |
regulator-state-mem { |
| 281 |
regulator-off-in-suspend; |
| 282 |
}; |
| 283 |
}; |
| 284 |
|
| 285 |
vdda_0v9: LDO_REG2 { |
| 286 |
regulator-name = "vdda_0v9"; |
| 287 |
regulator-always-on; |
| 288 |
regulator-boot-on; |
| 289 |
regulator-min-microvolt = <900000>; |
| 290 |
regulator-max-microvolt = <900000>; |
| 291 |
|
| 292 |
regulator-state-mem { |
| 293 |
regulator-off-in-suspend; |
| 294 |
}; |
| 295 |
}; |
| 296 |
|
| 297 |
vdda0v9_pmu: LDO_REG3 { |
| 298 |
regulator-name = "vdda0v9_pmu"; |
| 299 |
regulator-always-on; |
| 300 |
regulator-boot-on; |
| 301 |
regulator-min-microvolt = <900000>; |
| 302 |
regulator-max-microvolt = <900000>; |
| 303 |
|
| 304 |
regulator-state-mem { |
| 305 |
regulator-on-in-suspend; |
| 306 |
regulator-suspend-microvolt = <900000>; |
| 307 |
}; |
| 308 |
}; |
| 309 |
|
| 310 |
vccio_acodec: LDO_REG4 { |
| 311 |
regulator-name = "vccio_acodec"; |
| 312 |
regulator-always-on; |
| 313 |
regulator-boot-on; |
| 314 |
regulator-min-microvolt = <3300000>; |
| 315 |
regulator-max-microvolt = <3300000>; |
| 316 |
|
| 317 |
regulator-state-mem { |
| 318 |
regulator-off-in-suspend; |
| 319 |
}; |
| 320 |
}; |
| 321 |
|
| 322 |
vccio_sd: LDO_REG5 { |
| 323 |
regulator-name = "vccio_sd"; |
| 324 |
regulator-min-microvolt = <1800000>; |
| 325 |
regulator-max-microvolt = <3300000>; |
| 326 |
|
| 327 |
regulator-state-mem { |
| 328 |
regulator-off-in-suspend; |
| 329 |
}; |
| 330 |
}; |
| 331 |
|
| 332 |
vcc3v3_pmu: LDO_REG6 { |
| 333 |
regulator-name = "vcc3v3_pmu"; |
| 334 |
regulator-always-on; |
| 335 |
regulator-boot-on; |
| 336 |
regulator-min-microvolt = <3300000>; |
| 337 |
regulator-max-microvolt = <3300000>; |
| 338 |
|
| 339 |
regulator-state-mem { |
| 340 |
regulator-on-in-suspend; |
| 341 |
regulator-suspend-microvolt = <3300000>; |
| 342 |
}; |
| 343 |
}; |
| 344 |
|
| 345 |
vcca_1v8: LDO_REG7 { |
| 346 |
regulator-name = "vcca_1v8"; |
| 347 |
regulator-always-on; |
| 348 |
regulator-boot-on; |
| 349 |
regulator-min-microvolt = <1800000>; |
| 350 |
regulator-max-microvolt = <1800000>; |
| 351 |
|
| 352 |
regulator-state-mem { |
| 353 |
regulator-off-in-suspend; |
| 354 |
}; |
| 355 |
}; |
| 356 |
|
| 357 |
vcca1v8_pmu: LDO_REG8 { |
| 358 |
regulator-name = "vcca1v8_pmu"; |
| 359 |
regulator-always-on; |
| 360 |
regulator-boot-on; |
| 361 |
regulator-min-microvolt = <1800000>; |
| 362 |
regulator-max-microvolt = <1800000>; |
| 363 |
|
| 364 |
regulator-state-mem { |
| 365 |
regulator-on-in-suspend; |
| 366 |
regulator-suspend-microvolt = <1800000>; |
| 367 |
}; |
| 368 |
}; |
| 369 |
|
| 370 |
vcca1v8_image: LDO_REG9 { |
| 371 |
regulator-name = "vcca1v8_image"; |
| 372 |
regulator-always-on; |
| 373 |
regulator-min-microvolt = <1800000>; |
| 374 |
regulator-max-microvolt = <1800000>; |
| 375 |
|
| 376 |
regulator-state-mem { |
| 377 |
regulator-off-in-suspend; |
| 378 |
}; |
| 379 |
}; |
| 380 |
|
| 381 |
vcc_3v3: SWITCH_REG1 { |
| 382 |
regulator-name = "vcc_3v3"; |
| 383 |
regulator-always-on; |
| 384 |
regulator-boot-on; |
| 385 |
|
| 386 |
regulator-state-mem { |
| 387 |
regulator-off-in-suspend; |
| 388 |
}; |
| 389 |
}; |
| 390 |
|
| 391 |
vcc3v3_sd: SWITCH_REG2 { |
| 392 |
regulator-name = "vcc3v3_sd"; |
| 393 |
/* |
| 394 |
* turning this off, breaks access to both |
| 395 |
* PCIe controllers, refclk generator perhaps |
| 396 |
*/ |
| 397 |
regulator-always-on; |
| 398 |
regulator-boot-on; |
| 399 |
|
| 400 |
regulator-state-mem { |
| 401 |
regulator-off-in-suspend; |
| 402 |
}; |
| 403 |
}; |
| 404 |
}; |
| 405 |
}; |
| 406 |
|
| 407 |
vdd_cpu: regulator@40 { |
| 408 |
compatible = "silergy,syr827"; |
| 409 |
reg = <0x40>; |
| 410 |
fcs,suspend-voltage-selector = <1>; |
| 411 |
regulator-name = "vdd_cpu"; |
| 412 |
regulator-always-on; |
| 413 |
regulator-boot-on; |
| 414 |
regulator-min-microvolt = <712500>; |
| 415 |
regulator-max-microvolt = <1390000>; |
| 416 |
regulator-ramp-delay = <2300>; |
| 417 |
vin-supply = <&vcc5v0_sys>; |
| 418 |
}; |
| 419 |
}; |
| 420 |
|
| 421 |
&i2c1 { |
| 422 |
status = "okay"; |
| 423 |
|
| 424 |
rtc_rv8263: rtc@51 { |
| 425 |
compatible = "microcrystal,rv8263"; |
| 426 |
reg = <0x51>; |
| 427 |
wakeup-source; |
| 428 |
}; |
| 429 |
|
| 430 |
/* eeprom for vital-product-data on the mainboard */ |
| 431 |
eeprom@54 { |
| 432 |
compatible = "giantec,gt24c04a", "atmel,24c04"; |
| 433 |
reg = <0x54>; |
| 434 |
label = "VPD_MB"; |
| 435 |
num-addresses = <2>; |
| 436 |
pagesize = <16>; |
| 437 |
read-only; |
| 438 |
}; |
| 439 |
}; |
| 440 |
|
| 441 |
&pinctrl { |
| 442 |
keys { |
| 443 |
copy_button_pin: copy-button-pin { |
| 444 |
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; |
| 445 |
}; |
| 446 |
|
| 447 |
reset_button_pin: reset-button-pin { |
| 448 |
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 449 |
}; |
| 450 |
}; |
| 451 |
|
| 452 |
leds { |
| 453 |
hdd1_led_pin: hdd1-led-pin { |
| 454 |
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 455 |
}; |
| 456 |
}; |
| 457 |
|
| 458 |
pmic { |
| 459 |
pmic_int_l: pmic-int-l { |
| 460 |
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 461 |
}; |
| 462 |
}; |
| 463 |
|
| 464 |
usb { |
| 465 |
vcc5v0_host_en: vcc5v0-host-en { |
| 466 |
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 467 |
}; |
| 468 |
|
| 469 |
vcc5v0_otg_en: vcc5v0-otg-en { |
| 470 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 471 |
}; |
| 472 |
}; |
| 473 |
}; |
| 474 |
|
| 475 |
&pmu_io_domains { |
| 476 |
vccio4-supply = <&vcc_1v8>; |
| 477 |
vccio6-supply = <&vcc_1v8>; |
| 478 |
status = "okay"; |
| 479 |
}; |
| 480 |
|
| 481 |
&sata2 { |
| 482 |
status = "okay"; |
| 483 |
}; |
| 484 |
|
| 485 |
&sdhci { |
| 486 |
bus-width = <8>; |
| 487 |
max-frequency = <200000000>; |
| 488 |
non-removable; |
| 489 |
pinctrl-names = "default"; |
| 490 |
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; |
| 491 |
status = "okay"; |
| 492 |
}; |
| 493 |
|
| 494 |
&tsadc { |
| 495 |
rockchip,hw-tshut-mode = <1>; |
| 496 |
rockchip,hw-tshut-polarity = <0>; |
| 497 |
status = "okay"; |
| 498 |
}; |
| 499 |
|
| 500 |
/* |
| 501 |
* Connected to an MCU, that provides access to more LEDs, |
| 502 |
* buzzer, fan control and more. |
| 503 |
*/ |
| 504 |
&uart0 { |
| 505 |
status = "okay"; |
| 506 |
|
| 507 |
mcu: mcu { |
| 508 |
fan: fan-0 { |
| 509 |
#cooling-cells = <2>; |
| 510 |
cooling-levels = <0 64 89 128 166 204 221 238>; |
| 511 |
}; |
| 512 |
|
| 513 |
nvmem-layout { |
| 514 |
compatible = "fixed-layout"; |
| 515 |
#address-cells = <1>; |
| 516 |
#size-cells = <1>; |
| 517 |
|
| 518 |
serial-number@0 { |
| 519 |
reg = <0x0 0x13>; |
| 520 |
}; |
| 521 |
|
| 522 |
ext-port@22 { |
| 523 |
reg = <0x22 0x2>; |
| 524 |
}; |
| 525 |
|
| 526 |
mac0: mac@24 { |
| 527 |
compatible = "mac-base"; |
| 528 |
reg = <0x24 0x11>; |
| 529 |
#nvmem-cell-cells = <1>; |
| 530 |
}; |
| 531 |
|
| 532 |
mac1: mac@35 { |
| 533 |
compatible = "mac-base"; |
| 534 |
reg = <0x35 0x11>; |
| 535 |
#nvmem-cell-cells = <1>; |
| 536 |
}; |
| 537 |
|
| 538 |
mac2: mac@46 { |
| 539 |
compatible = "mac-base"; |
| 540 |
reg = <0x46 0x11>; |
| 541 |
#nvmem-cell-cells = <1>; |
| 542 |
}; |
| 543 |
|
| 544 |
mac3: mac@57 { |
| 545 |
compatible = "mac-base"; |
| 546 |
reg = <0x57 0x11>; |
| 547 |
#nvmem-cell-cells = <1>; |
| 548 |
}; |
| 549 |
|
| 550 |
mac4: mac@68 { |
| 551 |
compatible = "mac-base"; |
| 552 |
reg = <0x68 0x11>; |
| 553 |
#nvmem-cell-cells = <1>; |
| 554 |
}; |
| 555 |
|
| 556 |
mac5: mac@79 { |
| 557 |
compatible = "mac-base"; |
| 558 |
reg = <0x79 0x11>; |
| 559 |
#nvmem-cell-cells = <1>; |
| 560 |
}; |
| 561 |
|
| 562 |
mac6: mac@8a { |
| 563 |
compatible = "mac-base"; |
| 564 |
reg = <0x8a 0x11>; |
| 565 |
#nvmem-cell-cells = <1>; |
| 566 |
}; |
| 567 |
|
| 568 |
mac7: mac@9b { |
| 569 |
compatible = "mac-base"; |
| 570 |
reg = <0x9b 0x11>; |
| 571 |
#nvmem-cell-cells = <1>; |
| 572 |
}; |
| 573 |
}; |
| 574 |
}; |
| 575 |
}; |
| 576 |
|
| 577 |
/* |
| 578 |
* Pins available on CN3 connector at TTL voltage level (3V3). |
| 579 |
* ,_ _. |
| 580 |
* |1234| 1=TX 2=VCC |
| 581 |
* `----' 3=RX 4=GND |
| 582 |
*/ |
| 583 |
&uart2 { |
| 584 |
status = "okay"; |
| 585 |
}; |
| 586 |
|
| 587 |
&usb2phy0 { |
| 588 |
status = "okay"; |
| 589 |
}; |
| 590 |
|
| 591 |
/* connected to usb_host0_xhci */ |
| 592 |
&usb2phy0_otg { |
| 593 |
phy-supply = <&vcc5v0_otg>; |
| 594 |
status = "okay"; |
| 595 |
}; |
| 596 |
|
| 597 |
/* front port */ |
| 598 |
&usb_host0_xhci { |
| 599 |
dr_mode = "host"; |
| 600 |
status = "okay"; |
| 601 |
}; |