| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/gpio/gpio.h> |
| 6 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 7 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 8 |
#include "rk3568.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Ariaboard Photonicat"; |
| 12 |
compatible = "ariaboard,photonicat", "rockchip,rk3568"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
ethernet0 = &gmac0; |
| 16 |
ethernet1 = &gmac1; |
| 17 |
mmc0 = &sdhci; |
| 18 |
mmc1 = &sdmmc0; |
| 19 |
mmc2 = &sdmmc1; |
| 20 |
}; |
| 21 |
|
| 22 |
battery: battery { |
| 23 |
compatible = "simple-battery"; |
| 24 |
device-chemistry = "lithium-ion"; |
| 25 |
charge-full-design-microamp-hours = <6800000>; |
| 26 |
energy-full-design-microwatt-hours = <25000000>; |
| 27 |
voltage-max-design-microvolt = <4200000>; |
| 28 |
voltage-min-design-microvolt = <3400000>; |
| 29 |
|
| 30 |
ocv-capacity-celsius = <25>; |
| 31 |
ocv-capacity-table-0 = <4100000 100>, <4040000 90>, |
| 32 |
<3980000 80>, <3920000 70>, |
| 33 |
<3870000 60>, <3820000 50>, |
| 34 |
<3790000 40>, <3770000 30>, |
| 35 |
<3740000 20>, <3680000 10>, |
| 36 |
<3450000 0>; |
| 37 |
}; |
| 38 |
|
| 39 |
chosen: chosen { |
| 40 |
stdout-path = "serial2:1500000n8"; |
| 41 |
}; |
| 42 |
|
| 43 |
hdmi_con: hdmi-con { |
| 44 |
compatible = "hdmi-connector"; |
| 45 |
type = "a"; |
| 46 |
|
| 47 |
port { |
| 48 |
hdmi_con_in: endpoint { |
| 49 |
remote-endpoint = <&hdmi_out_con>; |
| 50 |
}; |
| 51 |
}; |
| 52 |
}; |
| 53 |
|
| 54 |
vcc_1v8: regulator-vcc-1v8 { |
| 55 |
compatible = "regulator-fixed"; |
| 56 |
regulator-name = "vcc_1v8"; |
| 57 |
regulator-always-on; |
| 58 |
regulator-boot-on; |
| 59 |
regulator-min-microvolt = <1800000>; |
| 60 |
regulator-max-microvolt = <1800000>; |
| 61 |
vin-supply = <&vcc3v3_sys>; |
| 62 |
}; |
| 63 |
|
| 64 |
vcc_3v3: regulator-vcc-3v3 { |
| 65 |
compatible = "regulator-fixed"; |
| 66 |
regulator-name = "vcc_3v3"; |
| 67 |
regulator-always-on; |
| 68 |
regulator-boot-on; |
| 69 |
regulator-min-microvolt = <3300000>; |
| 70 |
regulator-max-microvolt = <3300000>; |
| 71 |
vin-supply = <&vcc3v3_sys>; |
| 72 |
}; |
| 73 |
|
| 74 |
/* actually fed by vcc_syson, dependent |
| 75 |
* on pi6c clock generator |
| 76 |
*/ |
| 77 |
vcc3v3_pcie: regulator-vcc3v3-pcie { |
| 78 |
compatible = "regulator-fixed"; |
| 79 |
regulator-name = "vcc3v3_pcie"; |
| 80 |
regulator-always-on; |
| 81 |
regulator-boot-on; |
| 82 |
regulator-min-microvolt = <3300000>; |
| 83 |
regulator-max-microvolt = <3300000>; |
| 84 |
vin-supply = <&vcc3v3_pi6c>; |
| 85 |
}; |
| 86 |
|
| 87 |
/* pi6c pcie clock generator */ |
| 88 |
vcc3v3_pi6c: regulator-vcc3v3-pi6c { |
| 89 |
compatible = "regulator-fixed"; |
| 90 |
enable-active-high; |
| 91 |
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| 92 |
pinctrl-names = "default"; |
| 93 |
pinctrl-0 = <&pcie_pwren_h>; |
| 94 |
regulator-name = "vcc3v3_pi6c"; |
| 95 |
regulator-min-microvolt = <3300000>; |
| 96 |
regulator-max-microvolt = <3300000>; |
| 97 |
vin-supply = <&vcc_syson>; |
| 98 |
}; |
| 99 |
|
| 100 |
vcc3v3_sd: regulator-vcc3v3-sd { |
| 101 |
compatible = "regulator-fixed"; |
| 102 |
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; |
| 103 |
pinctrl-names = "default"; |
| 104 |
pinctrl-0 = <&sdmmc0_pwren>; |
| 105 |
regulator-boot-on; |
| 106 |
regulator-name = "vcc3v3_sd"; |
| 107 |
regulator-min-microvolt = <3300000>; |
| 108 |
regulator-max-microvolt = <3300000>; |
| 109 |
vin-supply = <&vcc_3v3>; |
| 110 |
}; |
| 111 |
|
| 112 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 113 |
compatible = "regulator-fixed"; |
| 114 |
regulator-name = "vcc3v3_sys"; |
| 115 |
regulator-always-on; |
| 116 |
regulator-boot-on; |
| 117 |
regulator-min-microvolt = <3300000>; |
| 118 |
regulator-max-microvolt = <3300000>; |
| 119 |
vin-supply = <&vcc_syson>; |
| 120 |
}; |
| 121 |
|
| 122 |
vcc3v4_rf: regulator-vcc3v4-rf { |
| 123 |
compatible = "regulator-fixed"; |
| 124 |
enable-active-high; |
| 125 |
gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; |
| 126 |
pinctrl-names = "default"; |
| 127 |
pinctrl-0 = <&rf_pwr_en>; |
| 128 |
regulator-name = "vcc3v4_rf"; |
| 129 |
regulator-min-microvolt = <3400000>; |
| 130 |
regulator-max-microvolt = <3400000>; |
| 131 |
vin-supply = <&vccin_5v>; |
| 132 |
}; |
| 133 |
|
| 134 |
vcc5v0_usb30_otg0: regulator-vcc5v0-usb30-otg0 { |
| 135 |
compatible = "regulator-fixed"; |
| 136 |
enable-active-high; |
| 137 |
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 138 |
pinctrl-names = "default"; |
| 139 |
pinctrl-0 = <&usb_host_pwren_h>; |
| 140 |
regulator-name = "vcc5v0_usb30_otg0"; |
| 141 |
regulator-min-microvolt = <5000000>; |
| 142 |
regulator-max-microvolt = <5000000>; |
| 143 |
vin-supply = <&vccin_5v>; |
| 144 |
}; |
| 145 |
|
| 146 |
vccin_5v: regulator-vccin-5v { |
| 147 |
compatible = "regulator-fixed"; |
| 148 |
regulator-name = "vccin_5v"; |
| 149 |
regulator-always-on; |
| 150 |
regulator-boot-on; |
| 151 |
regulator-min-microvolt = <5000000>; |
| 152 |
regulator-max-microvolt = <5000000>; |
| 153 |
}; |
| 154 |
|
| 155 |
vcc_sysin: regulator-vcc-sysin { |
| 156 |
compatible = "regulator-fixed"; |
| 157 |
regulator-name = "vcc_sysin"; |
| 158 |
regulator-always-on; |
| 159 |
regulator-boot-on; |
| 160 |
regulator-min-microvolt = <5000000>; |
| 161 |
regulator-max-microvolt = <5000000>; |
| 162 |
vin-supply = <&vccin_5v>; |
| 163 |
}; |
| 164 |
|
| 165 |
vcc_syson: regulator-vcc-syson { |
| 166 |
compatible = "regulator-fixed"; |
| 167 |
regulator-name = "vcc_syson"; |
| 168 |
regulator-always-on; |
| 169 |
regulator-boot-on; |
| 170 |
regulator-min-microvolt = <5000000>; |
| 171 |
regulator-max-microvolt = <5000000>; |
| 172 |
vin-supply = <&vcc_sysin>; |
| 173 |
}; |
| 174 |
|
| 175 |
vcca_1v8: regulator-vcca-1v8 { |
| 176 |
compatible = "regulator-fixed"; |
| 177 |
regulator-name = "vcca_1v8"; |
| 178 |
regulator-always-on; |
| 179 |
regulator-boot-on; |
| 180 |
regulator-min-microvolt = <1800000>; |
| 181 |
regulator-max-microvolt = <1800000>; |
| 182 |
vin-supply = <&vcc3v3_sys>; |
| 183 |
}; |
| 184 |
|
| 185 |
vdda_0v9: regulator-vdda-0v9 { |
| 186 |
compatible = "regulator-fixed"; |
| 187 |
regulator-name = "vdda_0v9"; |
| 188 |
regulator-always-on; |
| 189 |
regulator-boot-on; |
| 190 |
regulator-min-microvolt = <900000>; |
| 191 |
regulator-max-microvolt = <900000>; |
| 192 |
vin-supply = <&vcc3v3_sys>; |
| 193 |
}; |
| 194 |
|
| 195 |
vdd_gpu: regulator-vdd-gpu { |
| 196 |
compatible = "pwm-regulator"; |
| 197 |
pwms = <&pwm2 0 5000 1>; |
| 198 |
pwm-supply = <&vcc_syson>; |
| 199 |
regulator-name = "vdd_gpu"; |
| 200 |
regulator-min-microvolt = <800000>; |
| 201 |
regulator-max-microvolt = <1350000>; |
| 202 |
regulator-ramp-delay = <6001>; |
| 203 |
regulator-settling-time-up-us = <250>; |
| 204 |
}; |
| 205 |
|
| 206 |
vdd_logic: regulator-vdd-logic { |
| 207 |
compatible = "pwm-regulator"; |
| 208 |
pwms = <&pwm1 0 5000 1>; |
| 209 |
pwm-supply = <&vcc_syson>; |
| 210 |
regulator-name = "vdd_logic"; |
| 211 |
regulator-min-microvolt = <500000>; |
| 212 |
regulator-max-microvolt = <1350000>; |
| 213 |
regulator-ramp-delay = <6001>; |
| 214 |
regulator-settling-time-up-us = <250>; |
| 215 |
}; |
| 216 |
|
| 217 |
rfkill-modem { |
| 218 |
compatible = "rfkill-gpio"; |
| 219 |
label = "M.2 USB Modem"; |
| 220 |
radio-type = "wwan"; |
| 221 |
shutdown-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; |
| 222 |
}; |
| 223 |
|
| 224 |
wifi_pwrseq: wifi-pwrseq { |
| 225 |
compatible = "mmc-pwrseq-simple"; |
| 226 |
clocks = <&pmucru CLK_RTC_32K>; |
| 227 |
clock-names = "ext_clock"; |
| 228 |
pinctrl-names = "default"; |
| 229 |
pinctrl-0 = <&wifi_reg_on_h &clk32k_out1>; |
| 230 |
post-power-on-delay-ms = <200>; |
| 231 |
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; |
| 232 |
}; |
| 233 |
}; |
| 234 |
|
| 235 |
&combphy0 { |
| 236 |
status = "okay"; |
| 237 |
}; |
| 238 |
|
| 239 |
&combphy1 { |
| 240 |
status = "okay"; |
| 241 |
}; |
| 242 |
|
| 243 |
&combphy2 { |
| 244 |
status = "okay"; |
| 245 |
}; |
| 246 |
|
| 247 |
&cpu0 { |
| 248 |
cpu-supply = <&vdd_cpu>; |
| 249 |
}; |
| 250 |
|
| 251 |
&cpu1 { |
| 252 |
cpu-supply = <&vdd_cpu>; |
| 253 |
}; |
| 254 |
|
| 255 |
&cpu2 { |
| 256 |
cpu-supply = <&vdd_cpu>; |
| 257 |
}; |
| 258 |
|
| 259 |
&cpu3 { |
| 260 |
cpu-supply = <&vdd_cpu>; |
| 261 |
}; |
| 262 |
|
| 263 |
/* Motorcomm YT8521SC LAN port (require SGMII) */ |
| 264 |
&gmac0 { |
| 265 |
status = "disabled"; |
| 266 |
}; |
| 267 |
|
| 268 |
/* Motorcomm YT8521SC WAN port */ |
| 269 |
&gmac1 { |
| 270 |
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; |
| 271 |
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; |
| 272 |
assigned-clock-rates = <0>, <125000000>; |
| 273 |
clock_in_out = "output"; |
| 274 |
phy-handle = <&rgmii_phy>; |
| 275 |
phy-mode = "rgmii-id"; |
| 276 |
phy-supply = <&vcc_3v3>; |
| 277 |
pinctrl-names = "default"; |
| 278 |
pinctrl-0 = <&gmac1m1_miim |
| 279 |
&gmac1m1_tx_bus2 |
| 280 |
&gmac1m1_rx_bus2 |
| 281 |
&gmac1m1_rgmii_clk |
| 282 |
&gmac1m1_rgmii_bus>; |
| 283 |
status = "okay"; |
| 284 |
}; |
| 285 |
|
| 286 |
&gpu { |
| 287 |
mali-supply = <&vdd_gpu>; |
| 288 |
status = "okay"; |
| 289 |
}; |
| 290 |
|
| 291 |
&hdmi { |
| 292 |
avdd-0v9-supply = <&vdda_0v9>; |
| 293 |
avdd-1v8-supply = <&vcca_1v8>; |
| 294 |
status = "okay"; |
| 295 |
}; |
| 296 |
|
| 297 |
&hdmi_in { |
| 298 |
hdmi_in_vp0: endpoint { |
| 299 |
remote-endpoint = <&vp0_out_hdmi>; |
| 300 |
}; |
| 301 |
}; |
| 302 |
|
| 303 |
&hdmi_out { |
| 304 |
hdmi_out_con: endpoint { |
| 305 |
remote-endpoint = <&hdmi_con_in>; |
| 306 |
}; |
| 307 |
}; |
| 308 |
|
| 309 |
&hdmi_sound { |
| 310 |
status = "okay"; |
| 311 |
}; |
| 312 |
|
| 313 |
&i2c0 { |
| 314 |
status = "okay"; |
| 315 |
|
| 316 |
vdd_cpu: regulator@1c { |
| 317 |
compatible = "tcs,tcs4525"; |
| 318 |
reg = <0x1c>; |
| 319 |
fcs,suspend-voltage-selector = <1>; |
| 320 |
regulator-name = "vdd_cpu"; |
| 321 |
regulator-always-on; |
| 322 |
regulator-boot-on; |
| 323 |
regulator-min-microvolt = <800000>; |
| 324 |
regulator-max-microvolt = <1150000>; |
| 325 |
regulator-ramp-delay = <2300>; |
| 326 |
vin-supply = <&vcc_syson>; |
| 327 |
|
| 328 |
regulator-state-mem { |
| 329 |
regulator-off-in-suspend; |
| 330 |
}; |
| 331 |
}; |
| 332 |
}; |
| 333 |
|
| 334 |
&i2c2 { |
| 335 |
pinctrl-names = "default"; |
| 336 |
pinctrl-0 = <&i2c2m1_xfer>; |
| 337 |
status = "okay"; |
| 338 |
}; |
| 339 |
|
| 340 |
&i2s0_8ch { |
| 341 |
status = "okay"; |
| 342 |
}; |
| 343 |
|
| 344 |
&mdio1 { |
| 345 |
rgmii_phy: ethernet-phy@3 { |
| 346 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 347 |
reg = <0x3>; |
| 348 |
reset-assert-us = <20000>; |
| 349 |
reset-deassert-us = <100000>; |
| 350 |
reset-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_LOW>; |
| 351 |
rx-internal-delay-ps = <1500>; |
| 352 |
tx-internal-delay-ps = <1500>; |
| 353 |
}; |
| 354 |
}; |
| 355 |
|
| 356 |
&pcie30phy { |
| 357 |
status = "okay"; |
| 358 |
}; |
| 359 |
|
| 360 |
/* M.2 E-Key for PCIe WLAN */ |
| 361 |
&pcie3x2 { |
| 362 |
max-link-speed = <1>; |
| 363 |
num-lanes = <1>; |
| 364 |
pinctrl-names = "default"; |
| 365 |
pinctrl-0 = <&pcie30x1m0_pins>; |
| 366 |
reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; |
| 367 |
vpcie3v3-supply = <&vcc3v3_pcie>; |
| 368 |
status = "okay"; |
| 369 |
}; |
| 370 |
|
| 371 |
&pinctrl { |
| 372 |
bt { |
| 373 |
bt_reg_on_h: bt-reg-on-h { |
| 374 |
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 375 |
}; |
| 376 |
}; |
| 377 |
|
| 378 |
pcie { |
| 379 |
pcie_pwren_h: pcie-pwren-h { |
| 380 |
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 381 |
}; |
| 382 |
}; |
| 383 |
|
| 384 |
sdmmc0 { |
| 385 |
sdmmc0_pwren: sdmmc0-pwren { |
| 386 |
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 387 |
}; |
| 388 |
}; |
| 389 |
|
| 390 |
usb { |
| 391 |
rf_pwr_en: rf-pwr-en { |
| 392 |
rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 393 |
}; |
| 394 |
|
| 395 |
usb_host_pwren_h: usb-host-pwren-h { |
| 396 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 397 |
}; |
| 398 |
}; |
| 399 |
|
| 400 |
wifi { |
| 401 |
wifi_reg_on_h: wifi-reg-on-h { |
| 402 |
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 403 |
}; |
| 404 |
}; |
| 405 |
}; |
| 406 |
|
| 407 |
&pmu_io_domains { |
| 408 |
pmuio1-supply = <&vcc_3v3>; |
| 409 |
pmuio2-supply = <&vcc_3v3>; |
| 410 |
vccio1-supply = <&vcc_3v3>; |
| 411 |
vccio2-supply = <&vcc_1v8>; |
| 412 |
vccio3-supply = <&vcc_3v3>; |
| 413 |
vccio4-supply = <&vcc_1v8>; |
| 414 |
vccio5-supply = <&vcc_3v3>; |
| 415 |
vccio6-supply = <&vcc_3v3>; |
| 416 |
vccio7-supply = <&vcc_3v3>; |
| 417 |
status = "okay"; |
| 418 |
}; |
| 419 |
|
| 420 |
&pwm1 { |
| 421 |
status = "okay"; |
| 422 |
}; |
| 423 |
|
| 424 |
&pwm2 { |
| 425 |
status = "okay"; |
| 426 |
}; |
| 427 |
|
| 428 |
&saradc { |
| 429 |
vref-supply = <&vcca_1v8>; |
| 430 |
status = "okay"; |
| 431 |
}; |
| 432 |
|
| 433 |
/* eMMC */ |
| 434 |
&sdhci { |
| 435 |
bus-width = <8>; |
| 436 |
max-frequency = <200000000>; |
| 437 |
mmc-hs200-1_8v; |
| 438 |
non-removable; |
| 439 |
pinctrl-names = "default"; |
| 440 |
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; |
| 441 |
vmmc-supply = <&vcc_3v3>; |
| 442 |
vqmmc-supply = <&vcc_1v8>; |
| 443 |
status = "okay"; |
| 444 |
}; |
| 445 |
|
| 446 |
/* Micro SD card slot */ |
| 447 |
&sdmmc0 { |
| 448 |
bus-width = <4>; |
| 449 |
cap-sd-highspeed; |
| 450 |
cd-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>; |
| 451 |
disable-wp; |
| 452 |
no-1-8-v; |
| 453 |
pinctrl-names = "default"; |
| 454 |
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>; |
| 455 |
vmmc-supply = <&vcc3v3_sd>; |
| 456 |
vqmmc-supply = <&vcc_3v3>; |
| 457 |
status = "okay"; |
| 458 |
}; |
| 459 |
|
| 460 |
/* Qualcomm Atheros QCA9377 WiFi */ |
| 461 |
&sdmmc1 { |
| 462 |
bus-width = <4>; |
| 463 |
cap-sd-highspeed; |
| 464 |
cap-sdio-irq; |
| 465 |
keep-power-in-suspend; |
| 466 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 467 |
non-removable; |
| 468 |
pinctrl-names = "default"; |
| 469 |
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; |
| 470 |
sd-uhs-sdr104; |
| 471 |
vmmc-supply = <&vcc3v3_sys>; |
| 472 |
vqmmc-supply = <&vcc_1v8>; |
| 473 |
#address-cells = <1>; |
| 474 |
#size-cells = <0>; |
| 475 |
status = "okay"; |
| 476 |
|
| 477 |
wifi: wifi@1 { |
| 478 |
reg = <1>; |
| 479 |
interrupt-parent = <&gpio2>; |
| 480 |
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_HIGH>; |
| 481 |
interrupt-names = "host-wake"; |
| 482 |
}; |
| 483 |
}; |
| 484 |
|
| 485 |
&tsadc { |
| 486 |
rockchip,hw-tshut-mode = <1>; |
| 487 |
rockchip,hw-tshut-polarity = <0>; |
| 488 |
status = "okay"; |
| 489 |
}; |
| 490 |
|
| 491 |
/* Qualcomm Atheros QCA9377 Bluetooth */ |
| 492 |
&uart1 { |
| 493 |
dma-names = "tx", "rx"; |
| 494 |
pinctrl-names = "default"; |
| 495 |
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; |
| 496 |
uart-has-rtscts; |
| 497 |
status = "okay"; |
| 498 |
|
| 499 |
bluetooth { |
| 500 |
compatible = "qcom,qca9377-bt"; |
| 501 |
clocks = <&pmucru CLK_RTC_32K>; |
| 502 |
enable-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 503 |
pinctrl-names = "default"; |
| 504 |
pinctrl-0 = <&bt_reg_on_h>; |
| 505 |
vddio-supply = <&vcc_1v8>; |
| 506 |
}; |
| 507 |
}; |
| 508 |
|
| 509 |
/* Debug UART */ |
| 510 |
&uart2 { |
| 511 |
status = "okay"; |
| 512 |
}; |
| 513 |
|
| 514 |
&uart3 { |
| 515 |
dma-names = "tx", "rx"; |
| 516 |
status = "okay"; |
| 517 |
}; |
| 518 |
|
| 519 |
/* Onboard power management MCU */ |
| 520 |
&uart4 { |
| 521 |
dma-names = "tx", "rx"; |
| 522 |
status = "okay"; |
| 523 |
}; |
| 524 |
|
| 525 |
/* M.2 E-Key for USB Bluetooth */ |
| 526 |
&usb_host0_ehci { |
| 527 |
status = "okay"; |
| 528 |
}; |
| 529 |
|
| 530 |
&usb_host0_ohci { |
| 531 |
status = "okay"; |
| 532 |
}; |
| 533 |
|
| 534 |
/* USB Type-A Port */ |
| 535 |
&usb_host0_xhci { |
| 536 |
dr_mode = "host"; |
| 537 |
status = "okay"; |
| 538 |
}; |
| 539 |
|
| 540 |
/* M.2 B-Key for USB Modem WWAN */ |
| 541 |
&usb_host1_xhci { |
| 542 |
status = "okay"; |
| 543 |
}; |
| 544 |
|
| 545 |
&usb2phy0 { |
| 546 |
status = "okay"; |
| 547 |
}; |
| 548 |
|
| 549 |
&usb2phy0_host { |
| 550 |
phy-supply = <&vcc3v4_rf>; |
| 551 |
status = "okay"; |
| 552 |
}; |
| 553 |
|
| 554 |
&usb2phy0_otg { |
| 555 |
phy-supply = <&vcc5v0_usb30_otg0>; |
| 556 |
status = "okay"; |
| 557 |
}; |
| 558 |
|
| 559 |
&usb2phy1 { |
| 560 |
status = "okay"; |
| 561 |
}; |
| 562 |
|
| 563 |
&usb2phy1_otg { |
| 564 |
phy-supply = <&vcc5v0_usb30_otg0>; |
| 565 |
status = "okay"; |
| 566 |
}; |
| 567 |
|
| 568 |
&vop { |
| 569 |
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| 570 |
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 571 |
status = "okay"; |
| 572 |
}; |
| 573 |
|
| 574 |
&vop_mmu { |
| 575 |
status = "okay"; |
| 576 |
}; |
| 577 |
|
| 578 |
&vp0 { |
| 579 |
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 580 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 581 |
remote-endpoint = <&hdmi_in_vp0>; |
| 582 |
}; |
| 583 |
}; |
| 584 |
|
| 585 |
&xin32k { |
| 586 |
pinctrl-names = "default"; |
| 587 |
pinctrl-0 = <&clk32k_out1>; |
| 588 |
}; |