| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 |
/* |
| 3 |
* Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. |
| 4 |
* (http://www.friendlyelec.com) |
| 5 |
* |
| 6 |
* Copyright (c) 2023 Tianling Shen <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
#include <dt-bindings/leds/common.h> |
| 13 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 14 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 15 |
#include "rk3568.dtsi" |
| 16 |
|
| 17 |
/ { |
| 18 |
aliases { |
| 19 |
mmc0 = &sdmmc0; |
| 20 |
mmc1 = &sdhci; |
| 21 |
rtc0 = &hym8563; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen: chosen { |
| 25 |
stdout-path = "serial2:1500000n8"; |
| 26 |
}; |
| 27 |
|
| 28 |
adc-keys { |
| 29 |
compatible = "adc-keys"; |
| 30 |
io-channels = <&saradc 0>; |
| 31 |
io-channel-names = "buttons"; |
| 32 |
keyup-threshold-microvolt = <1800000>; |
| 33 |
poll-interval = <100>; |
| 34 |
|
| 35 |
button-maskrom { |
| 36 |
label = "MASKROM"; |
| 37 |
linux,code = <KEY_SETUP>; |
| 38 |
press-threshold-microvolt = <0>; |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
hdmi-con { |
| 43 |
compatible = "hdmi-connector"; |
| 44 |
type = "a"; |
| 45 |
|
| 46 |
port { |
| 47 |
hdmi_con_in: endpoint { |
| 48 |
remote-endpoint = <&hdmi_out_con>; |
| 49 |
}; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
vdd_usbc: regulator-vdd-usbc { |
| 54 |
compatible = "regulator-fixed"; |
| 55 |
regulator-name = "vdd_usbc"; |
| 56 |
regulator-always-on; |
| 57 |
regulator-boot-on; |
| 58 |
regulator-min-microvolt = <5000000>; |
| 59 |
regulator-max-microvolt = <5000000>; |
| 60 |
}; |
| 61 |
|
| 62 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 63 |
compatible = "regulator-fixed"; |
| 64 |
regulator-name = "vcc3v3_sys"; |
| 65 |
regulator-always-on; |
| 66 |
regulator-boot-on; |
| 67 |
regulator-min-microvolt = <3300000>; |
| 68 |
regulator-max-microvolt = <3300000>; |
| 69 |
vin-supply = <&vdd_usbc>; |
| 70 |
}; |
| 71 |
|
| 72 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 73 |
compatible = "regulator-fixed"; |
| 74 |
regulator-name = "vcc5v0_sys"; |
| 75 |
regulator-always-on; |
| 76 |
regulator-boot-on; |
| 77 |
regulator-min-microvolt = <5000000>; |
| 78 |
regulator-max-microvolt = <5000000>; |
| 79 |
vin-supply = <&vdd_usbc>; |
| 80 |
}; |
| 81 |
|
| 82 |
vcc3v3_pcie: regulator-vcc3v3-pcie { |
| 83 |
compatible = "regulator-fixed"; |
| 84 |
regulator-name = "vcc3v3_pcie"; |
| 85 |
regulator-min-microvolt = <3300000>; |
| 86 |
regulator-max-microvolt = <3300000>; |
| 87 |
enable-active-high; |
| 88 |
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; |
| 89 |
startup-delay-us = <200000>; |
| 90 |
vin-supply = <&vcc5v0_sys>; |
| 91 |
}; |
| 92 |
|
| 93 |
vcc5v0_usb: regulator-vcc5v0-usb { |
| 94 |
compatible = "regulator-fixed"; |
| 95 |
regulator-name = "vcc5v0_usb"; |
| 96 |
regulator-always-on; |
| 97 |
regulator-boot-on; |
| 98 |
regulator-min-microvolt = <5000000>; |
| 99 |
regulator-max-microvolt = <5000000>; |
| 100 |
vin-supply = <&vdd_usbc>; |
| 101 |
}; |
| 102 |
|
| 103 |
vcc5v0_usb_host: regulator-vcc5v0-usb-host { |
| 104 |
compatible = "regulator-fixed"; |
| 105 |
enable-active-high; |
| 106 |
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| 107 |
pinctrl-names = "default"; |
| 108 |
pinctrl-0 = <&vcc5v0_usb_host_en>; |
| 109 |
regulator-name = "vcc5v0_usb_host"; |
| 110 |
regulator-always-on; |
| 111 |
regulator-boot-on; |
| 112 |
regulator-min-microvolt = <5000000>; |
| 113 |
regulator-max-microvolt = <5000000>; |
| 114 |
vin-supply = <&vcc5v0_usb>; |
| 115 |
}; |
| 116 |
|
| 117 |
vcc5v0_usb_otg: regulator-vcc5v0-usb-otg { |
| 118 |
compatible = "regulator-fixed"; |
| 119 |
enable-active-high; |
| 120 |
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 121 |
pinctrl-names = "default"; |
| 122 |
pinctrl-0 = <&vcc5v0_usb_otg_en>; |
| 123 |
regulator-name = "vcc5v0_usb_otg"; |
| 124 |
regulator-min-microvolt = <5000000>; |
| 125 |
regulator-max-microvolt = <5000000>; |
| 126 |
vin-supply = <&vcc5v0_usb>; |
| 127 |
}; |
| 128 |
|
| 129 |
pcie30_avdd0v9: regulator-pcie30-avdd0v9 { |
| 130 |
compatible = "regulator-fixed"; |
| 131 |
regulator-name = "pcie30_avdd0v9"; |
| 132 |
regulator-always-on; |
| 133 |
regulator-boot-on; |
| 134 |
regulator-min-microvolt = <900000>; |
| 135 |
regulator-max-microvolt = <900000>; |
| 136 |
vin-supply = <&vcc3v3_sys>; |
| 137 |
}; |
| 138 |
|
| 139 |
pcie30_avdd1v8: regulator-pcie30-avdd1v8 { |
| 140 |
compatible = "regulator-fixed"; |
| 141 |
regulator-name = "pcie30_avdd1v8"; |
| 142 |
regulator-always-on; |
| 143 |
regulator-boot-on; |
| 144 |
regulator-min-microvolt = <1800000>; |
| 145 |
regulator-max-microvolt = <1800000>; |
| 146 |
vin-supply = <&vcc3v3_sys>; |
| 147 |
}; |
| 148 |
}; |
| 149 |
|
| 150 |
&combphy0 { |
| 151 |
status = "okay"; |
| 152 |
}; |
| 153 |
|
| 154 |
&combphy1 { |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&combphy2 { |
| 159 |
status = "okay"; |
| 160 |
}; |
| 161 |
|
| 162 |
&cpu0 { |
| 163 |
cpu-supply = <&vdd_cpu>; |
| 164 |
}; |
| 165 |
|
| 166 |
&cpu1 { |
| 167 |
cpu-supply = <&vdd_cpu>; |
| 168 |
}; |
| 169 |
|
| 170 |
&cpu2 { |
| 171 |
cpu-supply = <&vdd_cpu>; |
| 172 |
}; |
| 173 |
|
| 174 |
&cpu3 { |
| 175 |
cpu-supply = <&vdd_cpu>; |
| 176 |
}; |
| 177 |
|
| 178 |
&gpu { |
| 179 |
mali-supply = <&vdd_gpu>; |
| 180 |
status = "okay"; |
| 181 |
}; |
| 182 |
|
| 183 |
&hdmi { |
| 184 |
avdd-0v9-supply = <&vdda0v9_image>; |
| 185 |
avdd-1v8-supply = <&vcca1v8_image>; |
| 186 |
status = "okay"; |
| 187 |
}; |
| 188 |
|
| 189 |
&hdmi_in { |
| 190 |
hdmi_in_vp0: endpoint { |
| 191 |
remote-endpoint = <&vp0_out_hdmi>; |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
&hdmi_out { |
| 196 |
hdmi_out_con: endpoint { |
| 197 |
remote-endpoint = <&hdmi_con_in>; |
| 198 |
}; |
| 199 |
}; |
| 200 |
|
| 201 |
&hdmi_sound { |
| 202 |
status = "okay"; |
| 203 |
}; |
| 204 |
|
| 205 |
&i2c0 { |
| 206 |
status = "okay"; |
| 207 |
|
| 208 |
vdd_cpu: regulator@1c { |
| 209 |
compatible = "tcs,tcs4525"; |
| 210 |
reg = <0x1c>; |
| 211 |
fcs,suspend-voltage-selector = <1>; |
| 212 |
regulator-name = "vdd_cpu"; |
| 213 |
regulator-always-on; |
| 214 |
regulator-boot-on; |
| 215 |
regulator-min-microvolt = <800000>; |
| 216 |
regulator-max-microvolt = <1150000>; |
| 217 |
regulator-ramp-delay = <2300>; |
| 218 |
vin-supply = <&vcc5v0_sys>; |
| 219 |
|
| 220 |
regulator-state-mem { |
| 221 |
regulator-off-in-suspend; |
| 222 |
}; |
| 223 |
}; |
| 224 |
|
| 225 |
rk809: pmic@20 { |
| 226 |
compatible = "rockchip,rk809"; |
| 227 |
reg = <0x20>; |
| 228 |
interrupt-parent = <&gpio0>; |
| 229 |
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; |
| 230 |
#clock-cells = <1>; |
| 231 |
pinctrl-names = "default"; |
| 232 |
pinctrl-0 = <&pmic_int>; |
| 233 |
system-power-controller; |
| 234 |
vcc1-supply = <&vcc3v3_sys>; |
| 235 |
vcc2-supply = <&vcc3v3_sys>; |
| 236 |
vcc3-supply = <&vcc3v3_sys>; |
| 237 |
vcc4-supply = <&vcc3v3_sys>; |
| 238 |
vcc5-supply = <&vcc3v3_sys>; |
| 239 |
vcc6-supply = <&vcc3v3_sys>; |
| 240 |
vcc7-supply = <&vcc3v3_sys>; |
| 241 |
vcc8-supply = <&vcc3v3_sys>; |
| 242 |
vcc9-supply = <&vcc3v3_sys>; |
| 243 |
wakeup-source; |
| 244 |
|
| 245 |
regulators { |
| 246 |
vdd_logic: DCDC_REG1 { |
| 247 |
regulator-name = "vdd_logic"; |
| 248 |
regulator-always-on; |
| 249 |
regulator-boot-on; |
| 250 |
regulator-initial-mode = <0x2>; |
| 251 |
regulator-min-microvolt = <500000>; |
| 252 |
regulator-max-microvolt = <1350000>; |
| 253 |
regulator-ramp-delay = <6001>; |
| 254 |
|
| 255 |
regulator-state-mem { |
| 256 |
regulator-off-in-suspend; |
| 257 |
}; |
| 258 |
}; |
| 259 |
|
| 260 |
vdd_gpu: DCDC_REG2 { |
| 261 |
regulator-name = "vdd_gpu"; |
| 262 |
regulator-always-on; |
| 263 |
regulator-initial-mode = <0x2>; |
| 264 |
regulator-min-microvolt = <500000>; |
| 265 |
regulator-max-microvolt = <1350000>; |
| 266 |
regulator-ramp-delay = <6001>; |
| 267 |
|
| 268 |
regulator-state-mem { |
| 269 |
regulator-off-in-suspend; |
| 270 |
}; |
| 271 |
}; |
| 272 |
|
| 273 |
vcc_ddr: DCDC_REG3 { |
| 274 |
regulator-name = "vcc_ddr"; |
| 275 |
regulator-always-on; |
| 276 |
regulator-boot-on; |
| 277 |
regulator-initial-mode = <0x2>; |
| 278 |
|
| 279 |
regulator-state-mem { |
| 280 |
regulator-on-in-suspend; |
| 281 |
}; |
| 282 |
}; |
| 283 |
|
| 284 |
vdd_npu: DCDC_REG4 { |
| 285 |
regulator-name = "vdd_npu"; |
| 286 |
regulator-initial-mode = <0x2>; |
| 287 |
regulator-min-microvolt = <500000>; |
| 288 |
regulator-max-microvolt = <1350000>; |
| 289 |
regulator-ramp-delay = <6001>; |
| 290 |
|
| 291 |
regulator-state-mem { |
| 292 |
regulator-off-in-suspend; |
| 293 |
}; |
| 294 |
}; |
| 295 |
|
| 296 |
vcc_1v8: DCDC_REG5 { |
| 297 |
regulator-name = "vcc_1v8"; |
| 298 |
regulator-always-on; |
| 299 |
regulator-boot-on; |
| 300 |
regulator-min-microvolt = <1800000>; |
| 301 |
regulator-max-microvolt = <1800000>; |
| 302 |
|
| 303 |
regulator-state-mem { |
| 304 |
regulator-off-in-suspend; |
| 305 |
}; |
| 306 |
}; |
| 307 |
|
| 308 |
vdda0v9_image: LDO_REG1 { |
| 309 |
regulator-name = "vdda0v9_image"; |
| 310 |
regulator-min-microvolt = <950000>; |
| 311 |
regulator-max-microvolt = <950000>; |
| 312 |
|
| 313 |
regulator-state-mem { |
| 314 |
regulator-off-in-suspend; |
| 315 |
}; |
| 316 |
}; |
| 317 |
|
| 318 |
vdda_0v9: LDO_REG2 { |
| 319 |
regulator-name = "vdda_0v9"; |
| 320 |
regulator-always-on; |
| 321 |
regulator-boot-on; |
| 322 |
regulator-min-microvolt = <900000>; |
| 323 |
regulator-max-microvolt = <900000>; |
| 324 |
|
| 325 |
regulator-state-mem { |
| 326 |
regulator-off-in-suspend; |
| 327 |
}; |
| 328 |
}; |
| 329 |
|
| 330 |
vdda0v9_pmu: LDO_REG3 { |
| 331 |
regulator-name = "vdda0v9_pmu"; |
| 332 |
regulator-always-on; |
| 333 |
regulator-boot-on; |
| 334 |
regulator-min-microvolt = <900000>; |
| 335 |
regulator-max-microvolt = <900000>; |
| 336 |
|
| 337 |
regulator-state-mem { |
| 338 |
regulator-on-in-suspend; |
| 339 |
regulator-suspend-microvolt = <900000>; |
| 340 |
}; |
| 341 |
}; |
| 342 |
|
| 343 |
vccio_acodec: LDO_REG4 { |
| 344 |
regulator-name = "vccio_acodec"; |
| 345 |
regulator-min-microvolt = <3300000>; |
| 346 |
regulator-max-microvolt = <3300000>; |
| 347 |
|
| 348 |
regulator-state-mem { |
| 349 |
regulator-off-in-suspend; |
| 350 |
}; |
| 351 |
}; |
| 352 |
|
| 353 |
vccio_sd: LDO_REG5 { |
| 354 |
regulator-name = "vccio_sd"; |
| 355 |
regulator-min-microvolt = <1800000>; |
| 356 |
regulator-max-microvolt = <3300000>; |
| 357 |
|
| 358 |
regulator-state-mem { |
| 359 |
regulator-off-in-suspend; |
| 360 |
}; |
| 361 |
}; |
| 362 |
|
| 363 |
vcc3v3_pmu: LDO_REG6 { |
| 364 |
regulator-name = "vcc3v3_pmu"; |
| 365 |
regulator-always-on; |
| 366 |
regulator-boot-on; |
| 367 |
regulator-min-microvolt = <3300000>; |
| 368 |
regulator-max-microvolt = <3300000>; |
| 369 |
|
| 370 |
regulator-state-mem { |
| 371 |
regulator-on-in-suspend; |
| 372 |
regulator-suspend-microvolt = <3300000>; |
| 373 |
}; |
| 374 |
}; |
| 375 |
|
| 376 |
vcca_1v8: LDO_REG7 { |
| 377 |
regulator-name = "vcca_1v8"; |
| 378 |
regulator-always-on; |
| 379 |
regulator-boot-on; |
| 380 |
regulator-min-microvolt = <1800000>; |
| 381 |
regulator-max-microvolt = <1800000>; |
| 382 |
|
| 383 |
regulator-state-mem { |
| 384 |
regulator-off-in-suspend; |
| 385 |
}; |
| 386 |
}; |
| 387 |
|
| 388 |
vcca1v8_pmu: LDO_REG8 { |
| 389 |
regulator-name = "vcca1v8_pmu"; |
| 390 |
regulator-always-on; |
| 391 |
regulator-boot-on; |
| 392 |
regulator-min-microvolt = <1800000>; |
| 393 |
regulator-max-microvolt = <1800000>; |
| 394 |
|
| 395 |
regulator-state-mem { |
| 396 |
regulator-on-in-suspend; |
| 397 |
regulator-suspend-microvolt = <1800000>; |
| 398 |
}; |
| 399 |
}; |
| 400 |
|
| 401 |
vcca1v8_image: LDO_REG9 { |
| 402 |
regulator-name = "vcca1v8_image"; |
| 403 |
regulator-min-microvolt = <1800000>; |
| 404 |
regulator-max-microvolt = <1800000>; |
| 405 |
|
| 406 |
regulator-state-mem { |
| 407 |
regulator-off-in-suspend; |
| 408 |
}; |
| 409 |
}; |
| 410 |
|
| 411 |
vcc_3v3: SWITCH_REG1 { |
| 412 |
regulator-name = "vcc_3v3"; |
| 413 |
regulator-always-on; |
| 414 |
regulator-boot-on; |
| 415 |
|
| 416 |
regulator-state-mem { |
| 417 |
regulator-off-in-suspend; |
| 418 |
}; |
| 419 |
}; |
| 420 |
|
| 421 |
vcc3v3_sd: SWITCH_REG2 { |
| 422 |
regulator-name = "vcc3v3_sd"; |
| 423 |
regulator-always-on; |
| 424 |
regulator-boot-on; |
| 425 |
|
| 426 |
regulator-state-mem { |
| 427 |
regulator-off-in-suspend; |
| 428 |
}; |
| 429 |
}; |
| 430 |
}; |
| 431 |
|
| 432 |
}; |
| 433 |
}; |
| 434 |
|
| 435 |
&i2c5 { |
| 436 |
status = "okay"; |
| 437 |
|
| 438 |
hym8563: rtc@51 { |
| 439 |
compatible = "haoyu,hym8563"; |
| 440 |
reg = <0x51>; |
| 441 |
interrupt-parent = <&gpio0>; |
| 442 |
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; |
| 443 |
#clock-cells = <0>; |
| 444 |
clock-output-names = "rtcic_32kout"; |
| 445 |
pinctrl-names = "default"; |
| 446 |
pinctrl-0 = <&hym8563_int>; |
| 447 |
wakeup-source; |
| 448 |
}; |
| 449 |
}; |
| 450 |
|
| 451 |
&i2s0_8ch { |
| 452 |
status = "okay"; |
| 453 |
}; |
| 454 |
|
| 455 |
&pcie30phy { |
| 456 |
data-lanes = <1 2>; |
| 457 |
status = "okay"; |
| 458 |
}; |
| 459 |
|
| 460 |
&pinctrl { |
| 461 |
hym8563 { |
| 462 |
hym8563_int: hym8563-int { |
| 463 |
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 464 |
}; |
| 465 |
}; |
| 466 |
|
| 467 |
pmic { |
| 468 |
pmic_int: pmic-int { |
| 469 |
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 470 |
}; |
| 471 |
}; |
| 472 |
|
| 473 |
usb { |
| 474 |
vcc5v0_usb_host_en: vcc5v0-usb-host-en { |
| 475 |
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 476 |
}; |
| 477 |
|
| 478 |
vcc5v0_usb_otg_en: vcc5v0-usb-otg-en { |
| 479 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 480 |
}; |
| 481 |
}; |
| 482 |
}; |
| 483 |
|
| 484 |
&pmu_io_domains { |
| 485 |
pmuio1-supply = <&vcc3v3_pmu>; |
| 486 |
pmuio2-supply = <&vcc3v3_pmu>; |
| 487 |
vccio1-supply = <&vccio_acodec>; |
| 488 |
vccio3-supply = <&vccio_sd>; |
| 489 |
vccio4-supply = <&vcc_1v8>; |
| 490 |
vccio5-supply = <&vcc_3v3>; |
| 491 |
vccio6-supply = <&vcc_1v8>; |
| 492 |
vccio7-supply = <&vcc_3v3>; |
| 493 |
status = "okay"; |
| 494 |
}; |
| 495 |
|
| 496 |
&saradc { |
| 497 |
vref-supply = <&vcca_1v8>; |
| 498 |
status = "okay"; |
| 499 |
}; |
| 500 |
|
| 501 |
&sdhci { |
| 502 |
bus-width = <8>; |
| 503 |
max-frequency = <200000000>; |
| 504 |
mmc-hs200-1_8v; |
| 505 |
non-removable; |
| 506 |
pinctrl-names = "default"; |
| 507 |
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; |
| 508 |
vmmc-supply = <&vcc_3v3>; |
| 509 |
vqmmc-supply = <&vcc_1v8>; |
| 510 |
status = "okay"; |
| 511 |
}; |
| 512 |
|
| 513 |
&sdmmc0 { |
| 514 |
max-frequency = <150000000>; |
| 515 |
no-sdio; |
| 516 |
no-mmc; |
| 517 |
bus-width = <4>; |
| 518 |
cap-mmc-highspeed; |
| 519 |
cap-sd-highspeed; |
| 520 |
disable-wp; |
| 521 |
vmmc-supply = <&vcc3v3_sd>; |
| 522 |
vqmmc-supply = <&vccio_sd>; |
| 523 |
pinctrl-names = "default"; |
| 524 |
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; |
| 525 |
status = "okay"; |
| 526 |
}; |
| 527 |
|
| 528 |
&tsadc { |
| 529 |
rockchip,hw-tshut-mode = <1>; |
| 530 |
rockchip,hw-tshut-polarity = <0>; |
| 531 |
status = "okay"; |
| 532 |
}; |
| 533 |
|
| 534 |
&uart2 { |
| 535 |
status = "okay"; |
| 536 |
}; |
| 537 |
|
| 538 |
&usb_host0_ehci { |
| 539 |
status = "okay"; |
| 540 |
}; |
| 541 |
|
| 542 |
&usb_host0_ohci { |
| 543 |
status = "okay"; |
| 544 |
}; |
| 545 |
|
| 546 |
&usb_host0_xhci { |
| 547 |
extcon = <&usb2phy0>; |
| 548 |
dr_mode = "host"; |
| 549 |
status = "okay"; |
| 550 |
}; |
| 551 |
|
| 552 |
&usb_host1_ehci { |
| 553 |
status = "okay"; |
| 554 |
}; |
| 555 |
|
| 556 |
&usb_host1_ohci { |
| 557 |
status = "okay"; |
| 558 |
}; |
| 559 |
|
| 560 |
&usb_host1_xhci { |
| 561 |
status = "okay"; |
| 562 |
}; |
| 563 |
|
| 564 |
&usb2phy0 { |
| 565 |
status = "okay"; |
| 566 |
}; |
| 567 |
|
| 568 |
&usb2phy0_host { |
| 569 |
phy-supply = <&vcc5v0_usb_host>; |
| 570 |
status = "okay"; |
| 571 |
}; |
| 572 |
|
| 573 |
&usb2phy0_otg { |
| 574 |
status = "okay"; |
| 575 |
}; |
| 576 |
|
| 577 |
&usb2phy1 { |
| 578 |
status = "okay"; |
| 579 |
}; |
| 580 |
|
| 581 |
&usb2phy1_host { |
| 582 |
phy-supply = <&vcc5v0_usb_otg>; |
| 583 |
status = "okay"; |
| 584 |
}; |
| 585 |
|
| 586 |
&usb2phy1_otg { |
| 587 |
status = "okay"; |
| 588 |
}; |
| 589 |
|
| 590 |
&vop { |
| 591 |
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| 592 |
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 593 |
status = "okay"; |
| 594 |
}; |
| 595 |
|
| 596 |
&vop_mmu { |
| 597 |
status = "okay"; |
| 598 |
}; |
| 599 |
|
| 600 |
&vp0 { |
| 601 |
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 602 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 603 |
remote-endpoint = <&hdmi_in_vp0>; |
| 604 |
}; |
| 605 |
}; |