Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3568-nanopi-r5s.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /*
3 * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
4 * (http://www.friendlyelec.com)
5 *
6 * Copyright (c) 2023 Tianling Shen <[email protected]>
7 */
8
9 /dts-v1/;
10 #include "rk3568-nanopi-r5s.dtsi"
11
12 / {
13 model = "FriendlyElec NanoPi R5S";
14 compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
15
16 aliases {
17 ethernet0 = &gmac0;
18 };
19
20 gpio-keys {
21 compatible = "gpio-keys";
22 pinctrl-0 = <&gpio4_a0_k1_pin>;
23 pinctrl-names = "default";
24
25 button-reset {
26 debounce-interval = <50>;
27 gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
28 label = "RESET";
29 linux,code = <KEY_RESTART>;
30 };
31 };
32
33 gpio-leds {
34 compatible = "gpio-leds";
35 pinctrl-names = "default";
36 pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
37
38 led-lan1 {
39 color = <LED_COLOR_ID_GREEN>;
40 default-state = "off";
41 function = LED_FUNCTION_LAN;
42 function-enumerator = <1>;
43 gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
44 label = "LAN-1";
45 };
46
47 led-lan2 {
48 color = <LED_COLOR_ID_GREEN>;
49 default-state = "off";
50 function = LED_FUNCTION_LAN;
51 function-enumerator = <2>;
52 gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
53 label = "LAN-2";
54 };
55
56 power_led: led-sys {
57 color = <LED_COLOR_ID_RED>;
58 function = LED_FUNCTION_POWER;
59 gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
60 label = "SYS";
61 linux,default-trigger = "heartbeat";
62 };
63
64 led-wan {
65 color = <LED_COLOR_ID_GREEN>;
66 default-state = "off";
67 function = LED_FUNCTION_WAN;
68 gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
69 label = "WAN";
70 };
71 };
72 };
73
74 &gmac0 {
75 assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
76 assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
77 assigned-clock-rates = <0>, <125000000>;
78 clock_in_out = "output";
79 phy-handle = <&rgmii_phy0>;
80 phy-mode = "rgmii";
81 phy-supply = <&vcc_3v3>;
82 pinctrl-names = "default";
83 pinctrl-0 = <&gmac0_miim
84 &gmac0_tx_bus2
85 &gmac0_rx_bus2
86 &gmac0_rgmii_clk
87 &gmac0_rgmii_bus>;
88 snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
89 snps,reset-active-low;
90 /* Reset time is 15ms, 50ms for rtl8211f */
91 snps,reset-delays-us = <0 15000 50000>;
92 tx_delay = <0x3c>;
93 rx_delay = <0x2f>;
94 status = "okay";
95 };
96
97 &mdio0 {
98 rgmii_phy0: ethernet-phy@1 {
99 compatible = "ethernet-phy-ieee802.3-c22";
100 reg = <1>;
101 pinctrl-0 = <&eth_phy0_reset_pin>;
102 pinctrl-names = "default";
103 };
104 };
105
106 &pcie2x1 {
107 num-lanes = <1>;
108 reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
109 status = "okay";
110 };
111
112 &pcie30phy {
113 data-lanes = <1 2>;
114 status = "okay";
115 };
116
117 &pcie3x1 {
118 num-lanes = <1>;
119 reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
120 vpcie3v3-supply = <&vcc3v3_pcie>;
121 status = "okay";
122 };
123
124 &pcie3x2 {
125 num-lanes = <1>;
126 num-ib-windows = <8>;
127 num-ob-windows = <8>;
128 reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
129 vpcie3v3-supply = <&vcc3v3_pcie>;
130 status = "okay";
131 };
132
133 &pinctrl {
134 gmac0 {
135 eth_phy0_reset_pin: eth-phy0-reset-pin {
136 rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
137 };
138 };
139
140 gpio-keys {
141 gpio4_a0_k1_pin: gpio4-a0-k1-pin {
142 rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
143 };
144 };
145
146 gpio-leds {
147 lan1_led_pin: lan1-led-pin {
148 rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
149 };
150
151 lan2_led_pin: lan2-led-pin {
152 rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
153 };
154
155 sys_led_pin: sys-led-pin {
156 rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
157 };
158
159 wan_led_pin: wan-led-pin {
160 rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
161 };
162 };
163 };