| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/* |
| 4 |
* Copyright (c) 2021 Rockchip Electronics Co., Ltd. |
| 5 |
* Copyright (c) 2022 EmbedFire <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/leds/common.h> |
| 11 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 12 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 13 |
#include "rk3568.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "EmbedFire LubanCat 2"; |
| 17 |
compatible = "embedfire,lubancat-2", "rockchip,rk3568"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
ethernet0 = &gmac0; |
| 21 |
ethernet1 = &gmac1; |
| 22 |
mmc0 = &sdmmc0; |
| 23 |
mmc1 = &sdhci; |
| 24 |
}; |
| 25 |
|
| 26 |
chosen: chosen { |
| 27 |
stdout-path = "serial2:1500000n8"; |
| 28 |
}; |
| 29 |
|
| 30 |
leds { |
| 31 |
compatible = "gpio-leds"; |
| 32 |
|
| 33 |
user_led: user-led { |
| 34 |
label = "user_led"; |
| 35 |
linux,default-trigger = "heartbeat"; |
| 36 |
default-state = "on"; |
| 37 |
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; |
| 38 |
pinctrl-names = "default"; |
| 39 |
pinctrl-0 = <&user_led_pin>; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
hdmi-con { |
| 44 |
compatible = "hdmi-connector"; |
| 45 |
type = "a"; |
| 46 |
|
| 47 |
port { |
| 48 |
hdmi_con_in: endpoint { |
| 49 |
remote-endpoint = <&hdmi_out_con>; |
| 50 |
}; |
| 51 |
}; |
| 52 |
}; |
| 53 |
|
| 54 |
dc_5v: regulator-dc-5v { |
| 55 |
compatible = "regulator-fixed"; |
| 56 |
regulator-name = "dc_5v"; |
| 57 |
regulator-always-on; |
| 58 |
regulator-boot-on; |
| 59 |
regulator-min-microvolt = <5000000>; |
| 60 |
regulator-max-microvolt = <5000000>; |
| 61 |
}; |
| 62 |
|
| 63 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 64 |
compatible = "regulator-fixed"; |
| 65 |
regulator-name = "vcc3v3_sys"; |
| 66 |
regulator-always-on; |
| 67 |
regulator-boot-on; |
| 68 |
regulator-min-microvolt = <3300000>; |
| 69 |
regulator-max-microvolt = <3300000>; |
| 70 |
vin-supply = <&vcc5v0_sys>; |
| 71 |
}; |
| 72 |
|
| 73 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 74 |
compatible = "regulator-fixed"; |
| 75 |
regulator-name = "vcc5v0_sys"; |
| 76 |
regulator-always-on; |
| 77 |
regulator-boot-on; |
| 78 |
regulator-min-microvolt = <5000000>; |
| 79 |
regulator-max-microvolt = <5000000>; |
| 80 |
vin-supply = <&dc_5v>; |
| 81 |
}; |
| 82 |
|
| 83 |
vcc3v3_m2_pcie: regulator-vcc3v3-m2-pcie { |
| 84 |
compatible = "regulator-fixed"; |
| 85 |
regulator-name = "m2_pcie_3v3"; |
| 86 |
enable-active-high; |
| 87 |
regulator-min-microvolt = <3300000>; |
| 88 |
regulator-max-microvolt = <3300000>; |
| 89 |
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; |
| 90 |
pinctrl-0 = <&vcc3v3_m2_pcie_en>; |
| 91 |
pinctrl-names = "default"; |
| 92 |
startup-delay-us = <200000>; |
| 93 |
vin-supply = <&vcc5v0_sys>; |
| 94 |
}; |
| 95 |
|
| 96 |
vcc3v3_mini_pcie: regulator-vcc3v3-mini-pcie { |
| 97 |
compatible = "regulator-fixed"; |
| 98 |
regulator-name = "minipcie_3v3"; |
| 99 |
enable-active-high; |
| 100 |
regulator-min-microvolt = <3300000>; |
| 101 |
regulator-max-microvolt = <3300000>; |
| 102 |
gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; |
| 103 |
pinctrl-0 = <&vcc3v3_mini_pcie_en>; |
| 104 |
pinctrl-names = "default"; |
| 105 |
startup-delay-us = <5000>; |
| 106 |
vin-supply = <&vcc5v0_sys>; |
| 107 |
}; |
| 108 |
|
| 109 |
vcc5v0_usb20_host: regulator-vcc5v0-usb20-host { |
| 110 |
compatible = "regulator-fixed"; |
| 111 |
regulator-name = "vcc5v0_usb20_host"; |
| 112 |
enable-active-high; |
| 113 |
gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; |
| 114 |
pinctrl-0 = <&vcc5v0_usb20_host_en>; |
| 115 |
pinctrl-names = "default"; |
| 116 |
}; |
| 117 |
|
| 118 |
vcc5v0_usb30_host: regulator-vcc5v0-usb30-host { |
| 119 |
compatible = "regulator-fixed"; |
| 120 |
regulator-name = "vcc5v0_usb30_host"; |
| 121 |
enable-active-high; |
| 122 |
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; |
| 123 |
pinctrl-0 = <&vcc5v0_usb30_host_en>; |
| 124 |
pinctrl-names = "default"; |
| 125 |
}; |
| 126 |
|
| 127 |
vcc5v0_otg_vbus: regulator-vcc5v0-otg-vbus { |
| 128 |
compatible = "regulator-fixed"; |
| 129 |
regulator-name = "vcc5v0_otg_vbus"; |
| 130 |
enable-active-high; |
| 131 |
regulator-min-microvolt = <5000000>; |
| 132 |
regulator-max-microvolt = <5000000>; |
| 133 |
gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; |
| 134 |
pinctrl-0 = <&vcc5v0_otg_vbus_en>; |
| 135 |
pinctrl-names = "default"; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
&combphy0 { |
| 140 |
status = "okay"; |
| 141 |
}; |
| 142 |
|
| 143 |
&combphy1 { |
| 144 |
status = "okay"; |
| 145 |
}; |
| 146 |
|
| 147 |
&combphy2 { |
| 148 |
status = "okay"; |
| 149 |
}; |
| 150 |
|
| 151 |
&cpu0 { |
| 152 |
cpu-supply = <&vdd_cpu>; |
| 153 |
}; |
| 154 |
|
| 155 |
&cpu1 { |
| 156 |
cpu-supply = <&vdd_cpu>; |
| 157 |
}; |
| 158 |
|
| 159 |
&cpu2 { |
| 160 |
cpu-supply = <&vdd_cpu>; |
| 161 |
}; |
| 162 |
|
| 163 |
&cpu3 { |
| 164 |
cpu-supply = <&vdd_cpu>; |
| 165 |
}; |
| 166 |
|
| 167 |
&gpu { |
| 168 |
mali-supply = <&vdd_gpu>; |
| 169 |
status = "okay"; |
| 170 |
}; |
| 171 |
|
| 172 |
&hdmi { |
| 173 |
avdd-0v9-supply = <&vdda0v9_image>; |
| 174 |
avdd-1v8-supply = <&vcca1v8_image>; |
| 175 |
status = "okay"; |
| 176 |
}; |
| 177 |
|
| 178 |
&hdmi_in { |
| 179 |
hdmi_in_vp0: endpoint { |
| 180 |
remote-endpoint = <&vp0_out_hdmi>; |
| 181 |
}; |
| 182 |
}; |
| 183 |
|
| 184 |
&hdmi_out { |
| 185 |
hdmi_out_con: endpoint { |
| 186 |
remote-endpoint = <&hdmi_con_in>; |
| 187 |
}; |
| 188 |
}; |
| 189 |
|
| 190 |
&hdmi_sound { |
| 191 |
status = "okay"; |
| 192 |
}; |
| 193 |
|
| 194 |
&i2c0 { |
| 195 |
status = "okay"; |
| 196 |
|
| 197 |
vdd_cpu: regulator@1c { |
| 198 |
compatible = "tcs,tcs4525"; |
| 199 |
reg = <0x1c>; |
| 200 |
fcs,suspend-voltage-selector = <1>; |
| 201 |
regulator-name = "vdd_cpu"; |
| 202 |
regulator-always-on; |
| 203 |
regulator-boot-on; |
| 204 |
regulator-min-microvolt = <800000>; |
| 205 |
regulator-max-microvolt = <1150000>; |
| 206 |
regulator-ramp-delay = <2300>; |
| 207 |
vin-supply = <&vcc5v0_sys>; |
| 208 |
|
| 209 |
regulator-state-mem { |
| 210 |
regulator-off-in-suspend; |
| 211 |
}; |
| 212 |
}; |
| 213 |
|
| 214 |
rk809: pmic@20 { |
| 215 |
compatible = "rockchip,rk809"; |
| 216 |
reg = <0x20>; |
| 217 |
interrupt-parent = <&gpio0>; |
| 218 |
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; |
| 219 |
assigned-clocks = <&cru I2S1_MCLKOUT_TX>; |
| 220 |
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; |
| 221 |
#clock-cells = <1>; |
| 222 |
clock-names = "mclk"; |
| 223 |
clocks = <&cru I2S1_MCLKOUT_TX>; |
| 224 |
pinctrl-names = "default"; |
| 225 |
pinctrl-0 = <&pmic_int>; |
| 226 |
system-power-controller; |
| 227 |
#sound-dai-cells = <0>; |
| 228 |
vcc1-supply = <&vcc3v3_sys>; |
| 229 |
vcc2-supply = <&vcc3v3_sys>; |
| 230 |
vcc3-supply = <&vcc3v3_sys>; |
| 231 |
vcc4-supply = <&vcc3v3_sys>; |
| 232 |
vcc5-supply = <&vcc3v3_sys>; |
| 233 |
vcc6-supply = <&vcc3v3_sys>; |
| 234 |
vcc7-supply = <&vcc3v3_sys>; |
| 235 |
vcc8-supply = <&vcc3v3_sys>; |
| 236 |
vcc9-supply = <&vcc3v3_sys>; |
| 237 |
wakeup-source; |
| 238 |
|
| 239 |
regulators { |
| 240 |
vdd_logic: DCDC_REG1 { |
| 241 |
regulator-name = "vdd_logic"; |
| 242 |
regulator-always-on; |
| 243 |
regulator-boot-on; |
| 244 |
regulator-min-microvolt = <500000>; |
| 245 |
regulator-max-microvolt = <1350000>; |
| 246 |
regulator-ramp-delay = <6001>; |
| 247 |
regulator-initial-mode = <0x2>; |
| 248 |
|
| 249 |
regulator-state-mem { |
| 250 |
regulator-off-in-suspend; |
| 251 |
}; |
| 252 |
}; |
| 253 |
|
| 254 |
vdd_gpu: DCDC_REG2 { |
| 255 |
regulator-name = "vdd_gpu"; |
| 256 |
regulator-always-on; |
| 257 |
regulator-boot-on; |
| 258 |
regulator-min-microvolt = <500000>; |
| 259 |
regulator-max-microvolt = <1350000>; |
| 260 |
regulator-ramp-delay = <6001>; |
| 261 |
regulator-initial-mode = <0x2>; |
| 262 |
|
| 263 |
regulator-state-mem { |
| 264 |
regulator-off-in-suspend; |
| 265 |
}; |
| 266 |
}; |
| 267 |
|
| 268 |
vcc_ddr: DCDC_REG3 { |
| 269 |
regulator-name = "vcc_ddr"; |
| 270 |
regulator-always-on; |
| 271 |
regulator-boot-on; |
| 272 |
regulator-initial-mode = <0x2>; |
| 273 |
|
| 274 |
regulator-state-mem { |
| 275 |
regulator-on-in-suspend; |
| 276 |
}; |
| 277 |
}; |
| 278 |
|
| 279 |
vdd_npu: DCDC_REG4 { |
| 280 |
regulator-name = "vdd_npu"; |
| 281 |
regulator-always-on; |
| 282 |
regulator-boot-on; |
| 283 |
regulator-min-microvolt = <500000>; |
| 284 |
regulator-max-microvolt = <1350000>; |
| 285 |
regulator-ramp-delay = <6001>; |
| 286 |
regulator-initial-mode = <0x2>; |
| 287 |
|
| 288 |
regulator-state-mem { |
| 289 |
regulator-off-in-suspend; |
| 290 |
}; |
| 291 |
}; |
| 292 |
|
| 293 |
vcc_1v8: DCDC_REG5 { |
| 294 |
regulator-name = "vcc_1v8"; |
| 295 |
regulator-always-on; |
| 296 |
regulator-boot-on; |
| 297 |
regulator-min-microvolt = <1800000>; |
| 298 |
regulator-max-microvolt = <1800000>; |
| 299 |
|
| 300 |
regulator-state-mem { |
| 301 |
regulator-off-in-suspend; |
| 302 |
}; |
| 303 |
}; |
| 304 |
|
| 305 |
vdda0v9_image: LDO_REG1 { |
| 306 |
regulator-name = "vdda0v9_image"; |
| 307 |
regulator-boot-on; |
| 308 |
regulator-always-on; |
| 309 |
regulator-min-microvolt = <900000>; |
| 310 |
regulator-max-microvolt = <900000>; |
| 311 |
|
| 312 |
regulator-state-mem { |
| 313 |
regulator-off-in-suspend; |
| 314 |
}; |
| 315 |
}; |
| 316 |
|
| 317 |
vdda_0v9: LDO_REG2 { |
| 318 |
regulator-name = "vdda_0v9"; |
| 319 |
regulator-always-on; |
| 320 |
regulator-boot-on; |
| 321 |
regulator-min-microvolt = <900000>; |
| 322 |
regulator-max-microvolt = <900000>; |
| 323 |
|
| 324 |
regulator-state-mem { |
| 325 |
regulator-off-in-suspend; |
| 326 |
}; |
| 327 |
}; |
| 328 |
|
| 329 |
vdda0v9_pmu: LDO_REG3 { |
| 330 |
regulator-name = "vdda0v9_pmu"; |
| 331 |
regulator-always-on; |
| 332 |
regulator-boot-on; |
| 333 |
regulator-min-microvolt = <900000>; |
| 334 |
regulator-max-microvolt = <900000>; |
| 335 |
|
| 336 |
regulator-state-mem { |
| 337 |
regulator-on-in-suspend; |
| 338 |
regulator-suspend-microvolt = <900000>; |
| 339 |
}; |
| 340 |
}; |
| 341 |
|
| 342 |
vccio_acodec: LDO_REG4 { |
| 343 |
regulator-name = "vccio_acodec"; |
| 344 |
regulator-always-on; |
| 345 |
regulator-boot-on; |
| 346 |
regulator-min-microvolt = <3300000>; |
| 347 |
regulator-max-microvolt = <3300000>; |
| 348 |
|
| 349 |
regulator-state-mem { |
| 350 |
regulator-off-in-suspend; |
| 351 |
}; |
| 352 |
}; |
| 353 |
|
| 354 |
vccio_sd: LDO_REG5 { |
| 355 |
regulator-name = "vccio_sd"; |
| 356 |
regulator-always-on; |
| 357 |
regulator-boot-on; |
| 358 |
regulator-min-microvolt = <1800000>; |
| 359 |
regulator-max-microvolt = <3300000>; |
| 360 |
|
| 361 |
regulator-state-mem { |
| 362 |
regulator-off-in-suspend; |
| 363 |
}; |
| 364 |
}; |
| 365 |
|
| 366 |
vcc3v3_pmu: LDO_REG6 { |
| 367 |
regulator-name = "vcc3v3_pmu"; |
| 368 |
regulator-always-on; |
| 369 |
regulator-boot-on; |
| 370 |
regulator-min-microvolt = <3300000>; |
| 371 |
regulator-max-microvolt = <3300000>; |
| 372 |
|
| 373 |
regulator-state-mem { |
| 374 |
regulator-on-in-suspend; |
| 375 |
regulator-suspend-microvolt = <3300000>; |
| 376 |
}; |
| 377 |
}; |
| 378 |
|
| 379 |
vcca_1v8: LDO_REG7 { |
| 380 |
regulator-name = "vcca_1v8"; |
| 381 |
regulator-always-on; |
| 382 |
regulator-boot-on; |
| 383 |
regulator-min-microvolt = <1800000>; |
| 384 |
regulator-max-microvolt = <1800000>; |
| 385 |
|
| 386 |
regulator-state-mem { |
| 387 |
regulator-off-in-suspend; |
| 388 |
}; |
| 389 |
}; |
| 390 |
|
| 391 |
vcca1v8_pmu: LDO_REG8 { |
| 392 |
regulator-name = "vcca1v8_pmu"; |
| 393 |
regulator-always-on; |
| 394 |
regulator-boot-on; |
| 395 |
regulator-min-microvolt = <1800000>; |
| 396 |
regulator-max-microvolt = <1800000>; |
| 397 |
|
| 398 |
regulator-state-mem { |
| 399 |
regulator-on-in-suspend; |
| 400 |
regulator-suspend-microvolt = <1800000>; |
| 401 |
}; |
| 402 |
}; |
| 403 |
|
| 404 |
vcca1v8_image: LDO_REG9 { |
| 405 |
regulator-name = "vcca1v8_image"; |
| 406 |
regulator-always-on; |
| 407 |
regulator-boot-on; |
| 408 |
regulator-min-microvolt = <1800000>; |
| 409 |
regulator-max-microvolt = <1800000>; |
| 410 |
|
| 411 |
regulator-state-mem { |
| 412 |
regulator-off-in-suspend; |
| 413 |
}; |
| 414 |
}; |
| 415 |
|
| 416 |
vcc_3v3: SWITCH_REG1 { |
| 417 |
regulator-name = "vcc_3v3"; |
| 418 |
regulator-always-on; |
| 419 |
regulator-boot-on; |
| 420 |
|
| 421 |
regulator-state-mem { |
| 422 |
regulator-off-in-suspend; |
| 423 |
}; |
| 424 |
}; |
| 425 |
|
| 426 |
vcc3v3_sd: SWITCH_REG2 { |
| 427 |
regulator-name = "vcc3v3_sd"; |
| 428 |
regulator-always-on; |
| 429 |
regulator-boot-on; |
| 430 |
|
| 431 |
regulator-state-mem { |
| 432 |
regulator-off-in-suspend; |
| 433 |
}; |
| 434 |
}; |
| 435 |
}; |
| 436 |
}; |
| 437 |
}; |
| 438 |
|
| 439 |
&i2s1_8ch { |
| 440 |
rockchip,trcm-sync-tx-only; |
| 441 |
status = "okay"; |
| 442 |
}; |
| 443 |
|
| 444 |
&gmac0 { |
| 445 |
phy-mode = "rgmii"; |
| 446 |
clock_in_out = "output"; |
| 447 |
|
| 448 |
snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; |
| 449 |
snps,reset-active-low; |
| 450 |
/* Reset time is 20ms, 100ms for rtl8211f */ |
| 451 |
snps,reset-delays-us = <0 20000 100000>; |
| 452 |
|
| 453 |
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; |
| 454 |
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; |
| 455 |
|
| 456 |
pinctrl-names = "default"; |
| 457 |
pinctrl-0 = <&gmac0_miim |
| 458 |
&gmac0_tx_bus2 |
| 459 |
&gmac0_rx_bus2 |
| 460 |
&gmac0_rgmii_clk |
| 461 |
&gmac0_rgmii_bus>; |
| 462 |
|
| 463 |
tx_delay = <0x22>; |
| 464 |
rx_delay = <0x0e>; |
| 465 |
|
| 466 |
phy-handle = <&rgmii_phy0>; |
| 467 |
status = "okay"; |
| 468 |
}; |
| 469 |
|
| 470 |
&mdio0 { |
| 471 |
rgmii_phy0: phy@0 { |
| 472 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 473 |
reg = <0x0>; |
| 474 |
}; |
| 475 |
}; |
| 476 |
|
| 477 |
&gmac1 { |
| 478 |
phy-mode = "rgmii"; |
| 479 |
clock_in_out = "output"; |
| 480 |
|
| 481 |
snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; |
| 482 |
snps,reset-active-low; |
| 483 |
/* Reset time is 20ms, 100ms for rtl8211f */ |
| 484 |
snps,reset-delays-us = <0 20000 100000>; |
| 485 |
|
| 486 |
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; |
| 487 |
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; |
| 488 |
|
| 489 |
pinctrl-names = "default"; |
| 490 |
pinctrl-0 = <&gmac1m1_miim |
| 491 |
&gmac1m1_tx_bus2 |
| 492 |
&gmac1m1_rx_bus2 |
| 493 |
&gmac1m1_rgmii_clk |
| 494 |
&gmac1m1_rgmii_bus>; |
| 495 |
|
| 496 |
tx_delay = <0x21>; |
| 497 |
rx_delay = <0x0e>; |
| 498 |
|
| 499 |
phy-handle = <&rgmii_phy1>; |
| 500 |
status = "okay"; |
| 501 |
}; |
| 502 |
|
| 503 |
&mdio1 { |
| 504 |
rgmii_phy1: phy@0 { |
| 505 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 506 |
reg = <0x0>; |
| 507 |
}; |
| 508 |
}; |
| 509 |
|
| 510 |
&gic { |
| 511 |
mbi-ranges = <94 31>, <229 31>, <289 31>; |
| 512 |
}; |
| 513 |
|
| 514 |
&pcie30phy { |
| 515 |
status = "okay"; |
| 516 |
}; |
| 517 |
|
| 518 |
&pcie3x2 { |
| 519 |
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; |
| 520 |
vpcie3v3-supply = <&vcc3v3_m2_pcie>; |
| 521 |
status = "okay"; |
| 522 |
}; |
| 523 |
|
| 524 |
&pcie2x1 { |
| 525 |
reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; |
| 526 |
vpcie3v3-supply = <&vcc3v3_mini_pcie>; |
| 527 |
status = "okay"; |
| 528 |
}; |
| 529 |
|
| 530 |
&pmu_io_domains { |
| 531 |
pmuio2-supply = <&vcc3v3_pmu>; |
| 532 |
vccio1-supply = <&vccio_acodec>; |
| 533 |
vccio3-supply = <&vccio_sd>; |
| 534 |
vccio4-supply = <&vcc_1v8>; |
| 535 |
vccio5-supply = <&vcc_3v3>; |
| 536 |
vccio6-supply = <&vcc_1v8>; |
| 537 |
vccio7-supply = <&vcc_3v3>; |
| 538 |
status = "okay"; |
| 539 |
}; |
| 540 |
|
| 541 |
&pwm8 { |
| 542 |
status = "okay"; |
| 543 |
}; |
| 544 |
|
| 545 |
&pwm9 { |
| 546 |
status = "disabled"; |
| 547 |
}; |
| 548 |
|
| 549 |
&pwm10 { |
| 550 |
status = "disabled"; |
| 551 |
}; |
| 552 |
|
| 553 |
&pwm14 { |
| 554 |
status = "disabled"; |
| 555 |
}; |
| 556 |
|
| 557 |
&spi3 { |
| 558 |
pinctrl-0 = <&spi3m1_pins>; |
| 559 |
status = "disabled"; |
| 560 |
}; |
| 561 |
|
| 562 |
&uart2 { |
| 563 |
status = "okay"; |
| 564 |
}; |
| 565 |
|
| 566 |
&uart3 { |
| 567 |
pinctrl-names = "default"; |
| 568 |
pinctrl-0 = <&uart3m1_xfer>; |
| 569 |
status = "disabled"; |
| 570 |
}; |
| 571 |
|
| 572 |
&saradc { |
| 573 |
vref-supply = <&vcca_1v8>; |
| 574 |
status = "okay"; |
| 575 |
}; |
| 576 |
|
| 577 |
&tsadc { |
| 578 |
rockchip,hw-tshut-mode = <1>; |
| 579 |
rockchip,hw-tshut-polarity = <0>; |
| 580 |
status = "okay"; |
| 581 |
}; |
| 582 |
|
| 583 |
&sdhci { |
| 584 |
assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>; |
| 585 |
assigned-clock-rates = <200000000>, <24000000>, <200000000>; |
| 586 |
bus-width = <8>; |
| 587 |
max-frequency = <200000000>; |
| 588 |
mmc-hs200-1_8v; |
| 589 |
non-removable; |
| 590 |
pinctrl-names = "default"; |
| 591 |
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; |
| 592 |
status = "okay"; |
| 593 |
}; |
| 594 |
|
| 595 |
&sdmmc0 { |
| 596 |
max-frequency = <150000000>; |
| 597 |
no-sdio; |
| 598 |
no-mmc; |
| 599 |
bus-width = <4>; |
| 600 |
cap-mmc-highspeed; |
| 601 |
cap-sd-highspeed; |
| 602 |
disable-wp; |
| 603 |
sd-uhs-sdr104; |
| 604 |
vmmc-supply = <&vcc3v3_sd>; |
| 605 |
vqmmc-supply = <&vccio_sd>; |
| 606 |
pinctrl-names = "default"; |
| 607 |
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; |
| 608 |
status = "okay"; |
| 609 |
}; |
| 610 |
|
| 611 |
/* USB OTG/USB Host_1 USB 2.0 Comb */ |
| 612 |
&usb2phy0 { |
| 613 |
status = "okay"; |
| 614 |
}; |
| 615 |
|
| 616 |
&usb2phy0_host { |
| 617 |
phy-supply = <&vcc5v0_usb30_host>; |
| 618 |
status = "okay"; |
| 619 |
}; |
| 620 |
|
| 621 |
&usb2phy0_otg { |
| 622 |
phy-supply = <&vcc5v0_otg_vbus>; |
| 623 |
status = "okay"; |
| 624 |
}; |
| 625 |
|
| 626 |
&usb_host0_ehci { |
| 627 |
status = "okay"; |
| 628 |
}; |
| 629 |
|
| 630 |
&usb_host0_ohci { |
| 631 |
status = "okay"; |
| 632 |
}; |
| 633 |
|
| 634 |
/* USB Host_2/USB Host_3 USB 2.0 Comb */ |
| 635 |
&usb2phy1 { |
| 636 |
status = "okay"; |
| 637 |
}; |
| 638 |
|
| 639 |
&usb2phy1_host { |
| 640 |
status = "okay"; |
| 641 |
}; |
| 642 |
|
| 643 |
&usb2phy1_otg { |
| 644 |
phy-supply = <&vcc5v0_usb20_host>; |
| 645 |
status = "okay"; |
| 646 |
}; |
| 647 |
|
| 648 |
&usb_host1_ehci { |
| 649 |
status = "okay"; |
| 650 |
}; |
| 651 |
|
| 652 |
&usb_host1_ohci { |
| 653 |
status = "okay"; |
| 654 |
}; |
| 655 |
|
| 656 |
/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */ |
| 657 |
&usb_host0_xhci { |
| 658 |
phys = <&usb2phy0_otg>; |
| 659 |
phy-names = "usb2-phy"; |
| 660 |
extcon = <&usb2phy0>; |
| 661 |
maximum-speed = "high-speed"; |
| 662 |
dr_mode = "host"; |
| 663 |
status = "okay"; |
| 664 |
}; |
| 665 |
|
| 666 |
&sata0 { |
| 667 |
status = "okay"; |
| 668 |
}; |
| 669 |
|
| 670 |
/* USB3.0 Host */ |
| 671 |
&usb_host1_xhci { |
| 672 |
status = "okay"; |
| 673 |
}; |
| 674 |
|
| 675 |
&vop { |
| 676 |
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| 677 |
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 678 |
status = "okay"; |
| 679 |
}; |
| 680 |
|
| 681 |
&vop_mmu { |
| 682 |
status = "okay"; |
| 683 |
}; |
| 684 |
|
| 685 |
&vp0 { |
| 686 |
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 687 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 688 |
remote-endpoint = <&hdmi_in_vp0>; |
| 689 |
}; |
| 690 |
}; |
| 691 |
|
| 692 |
&pinctrl { |
| 693 |
leds { |
| 694 |
user_led_pin: user-status-led-pin { |
| 695 |
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 696 |
}; |
| 697 |
}; |
| 698 |
|
| 699 |
usb { |
| 700 |
vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { |
| 701 |
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 702 |
}; |
| 703 |
|
| 704 |
vcc5v0_usb30_host_en: vcc5v0-usb30-host-en { |
| 705 |
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 706 |
}; |
| 707 |
|
| 708 |
vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en { |
| 709 |
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 710 |
}; |
| 711 |
}; |
| 712 |
|
| 713 |
pcie { |
| 714 |
vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en { |
| 715 |
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 716 |
}; |
| 717 |
|
| 718 |
vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en { |
| 719 |
rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 720 |
}; |
| 721 |
}; |
| 722 |
|
| 723 |
pmic { |
| 724 |
pmic_int: pmic-int { |
| 725 |
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 726 |
}; |
| 727 |
}; |
| 728 |
}; |