Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3568-fastrhino-r68s.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "rk3568-fastrhino-r66s.dtsi"
4
5 / {
6 model = "Lunzn FastRhino R68S";
7 compatible = "lunzn,fastrhino-r68s", "rockchip,rk3568";
8
9 aliases {
10 ethernet0 = &gmac0;
11 ethernet1 = &gmac1;
12 mmc0 = &sdhci;
13 };
14
15 adc-keys {
16 compatible = "adc-keys";
17 io-channels = <&saradc 0>;
18 io-channel-names = "buttons";
19 keyup-threshold-microvolt = <1800000>;
20
21 button-recovery {
22 label = "Recovery";
23 linux,code = <KEY_VENDOR>;
24 press-threshold-microvolt = <1750>;
25 };
26 };
27 };
28
29 &gmac0 {
30 assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
31 assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
32 assigned-clock-rates = <0>, <125000000>;
33 clock_in_out = "output";
34 phy-handle = <&rgmii_phy0>;
35 phy-mode = "rgmii-id";
36 pinctrl-names = "default";
37 pinctrl-0 = <&gmac0_miim
38 &gmac0_tx_bus2
39 &gmac0_rx_bus2
40 &gmac0_rgmii_clk
41 &gmac0_rgmii_bus>;
42 status = "okay";
43 };
44
45 &gmac1 {
46 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
47 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
48 assigned-clock-rates = <0>, <125000000>;
49 clock_in_out = "output";
50 phy-handle = <&rgmii_phy1>;
51 phy-mode = "rgmii-id";
52 pinctrl-names = "default";
53 pinctrl-0 = <&gmac1m1_miim
54 &gmac1m1_tx_bus2
55 &gmac1m1_rx_bus2
56 &gmac1m1_rgmii_clk
57 &gmac1m1_rgmii_bus>;
58 status = "okay";
59 };
60
61 &mdio0 {
62 rgmii_phy0: ethernet-phy@1 {
63 compatible = "ethernet-phy-ieee802.3-c22";
64 reg = <0x1>;
65 pinctrl-0 = <&eth_phy0_reset_pin>;
66 pinctrl-names = "default";
67 reset-assert-us = <20000>;
68 reset-deassert-us = <100000>;
69 reset-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
70 };
71 };
72
73 &mdio1 {
74 rgmii_phy1: ethernet-phy@1 {
75 compatible = "ethernet-phy-ieee802.3-c22";
76 reg = <0x1>;
77 pinctrl-0 = <&eth_phy1_reset_pin>;
78 pinctrl-names = "default";
79 reset-assert-us = <20000>;
80 reset-deassert-us = <100000>;
81 reset-gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
82 };
83 };
84
85 &pinctrl {
86 gmac0 {
87 eth_phy0_reset_pin: eth-phy0-reset-pin {
88 rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
89 };
90 };
91
92 gmac1 {
93 eth_phy1_reset_pin: eth-phy1-reset-pin {
94 rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
95 };
96 };
97 };
98
99 &pmu_io_domains {
100 vccio3-supply = <&vcc_3v3>;
101 };
102
103 &sdhci {
104 bus-width = <8>;
105 max-frequency = <200000000>;
106 non-removable;
107 pinctrl-names = "default";
108 pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
109 status = "okay";
110 };