| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Author: Frank Wunderlich <[email protected]> |
| 4 |
* |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/leds/common.h> |
| 10 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 11 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 12 |
#include "rk3568.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Bananapi-R2 Pro (RK3568) DDR4 Board"; |
| 16 |
compatible = "sinovoip,rk3568-bpi-r2pro", "rockchip,rk3568"; |
| 17 |
|
| 18 |
aliases { |
| 19 |
ethernet0 = &gmac0; |
| 20 |
ethernet1 = &gmac1; |
| 21 |
mmc0 = &sdmmc0; |
| 22 |
mmc1 = &sdhci; |
| 23 |
}; |
| 24 |
|
| 25 |
chosen: chosen { |
| 26 |
stdout-path = "serial2:1500000n8"; |
| 27 |
}; |
| 28 |
|
| 29 |
leds { |
| 30 |
compatible = "gpio-leds"; |
| 31 |
pinctrl-names = "default"; |
| 32 |
pinctrl-0 = <&blue_led_pin &green_led_pin>; |
| 33 |
|
| 34 |
blue_led: led-0 { |
| 35 |
color = <LED_COLOR_ID_BLUE>; |
| 36 |
default-state = "off"; |
| 37 |
function = LED_FUNCTION_STATUS; |
| 38 |
gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; |
| 39 |
}; |
| 40 |
|
| 41 |
green_led: led-1 { |
| 42 |
color = <LED_COLOR_ID_GREEN>; |
| 43 |
default-state = "on"; |
| 44 |
function = LED_FUNCTION_POWER; |
| 45 |
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
dc_12v: regulator-dc-12v { |
| 50 |
compatible = "regulator-fixed"; |
| 51 |
regulator-name = "dc_12v"; |
| 52 |
regulator-always-on; |
| 53 |
regulator-boot-on; |
| 54 |
regulator-min-microvolt = <12000000>; |
| 55 |
regulator-max-microvolt = <12000000>; |
| 56 |
}; |
| 57 |
|
| 58 |
hdmi-con { |
| 59 |
compatible = "hdmi-connector"; |
| 60 |
type = "a"; |
| 61 |
|
| 62 |
port { |
| 63 |
hdmi_con_in: endpoint { |
| 64 |
remote-endpoint = <&hdmi_out_con>; |
| 65 |
}; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
ir-receiver { |
| 70 |
compatible = "gpio-ir-receiver"; |
| 71 |
gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; |
| 72 |
pinctrl-names = "default"; |
| 73 |
pinctrl-0 = <&ir_receiver_pin>; |
| 74 |
}; |
| 75 |
|
| 76 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 77 |
compatible = "regulator-fixed"; |
| 78 |
regulator-name = "vcc3v3_sys"; |
| 79 |
regulator-always-on; |
| 80 |
regulator-boot-on; |
| 81 |
regulator-min-microvolt = <3300000>; |
| 82 |
regulator-max-microvolt = <3300000>; |
| 83 |
vin-supply = <&dc_12v>; |
| 84 |
}; |
| 85 |
|
| 86 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 87 |
compatible = "regulator-fixed"; |
| 88 |
regulator-name = "vcc5v0_sys"; |
| 89 |
regulator-always-on; |
| 90 |
regulator-boot-on; |
| 91 |
regulator-min-microvolt = <5000000>; |
| 92 |
regulator-max-microvolt = <5000000>; |
| 93 |
vin-supply = <&dc_12v>; |
| 94 |
}; |
| 95 |
|
| 96 |
pcie30_avdd0v9: regulator-pcie30-avdd0v9 { |
| 97 |
compatible = "regulator-fixed"; |
| 98 |
regulator-name = "pcie30_avdd0v9"; |
| 99 |
regulator-always-on; |
| 100 |
regulator-boot-on; |
| 101 |
regulator-min-microvolt = <900000>; |
| 102 |
regulator-max-microvolt = <900000>; |
| 103 |
vin-supply = <&vcc3v3_sys>; |
| 104 |
}; |
| 105 |
|
| 106 |
pcie30_avdd1v8: regulator-pcie30-avdd1v8 { |
| 107 |
compatible = "regulator-fixed"; |
| 108 |
regulator-name = "pcie30_avdd1v8"; |
| 109 |
regulator-always-on; |
| 110 |
regulator-boot-on; |
| 111 |
regulator-min-microvolt = <1800000>; |
| 112 |
regulator-max-microvolt = <1800000>; |
| 113 |
vin-supply = <&vcc3v3_sys>; |
| 114 |
}; |
| 115 |
|
| 116 |
/* pi6c pcie clock generator feeds both ports */ |
| 117 |
vcc3v3_pi6c_05: regulator-vcc3v3-pi6c-05 { |
| 118 |
compatible = "regulator-fixed"; |
| 119 |
regulator-name = "vcc3v3_pcie"; |
| 120 |
regulator-min-microvolt = <3300000>; |
| 121 |
regulator-max-microvolt = <3300000>; |
| 122 |
enable-active-high; |
| 123 |
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; |
| 124 |
startup-delay-us = <200000>; |
| 125 |
vin-supply = <&vcc5v0_sys>; |
| 126 |
}; |
| 127 |
|
| 128 |
/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ |
| 129 |
vcc3v3_minipcie: regulator-vcc3v3-minipcie { |
| 130 |
compatible = "regulator-fixed"; |
| 131 |
regulator-name = "vcc3v3_minipcie"; |
| 132 |
regulator-min-microvolt = <3300000>; |
| 133 |
regulator-max-microvolt = <3300000>; |
| 134 |
enable-active-high; |
| 135 |
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; |
| 136 |
pinctrl-names = "default"; |
| 137 |
pinctrl-0 = <&minipcie_enable_h>; |
| 138 |
startup-delay-us = <50000>; |
| 139 |
vin-supply = <&vcc3v3_pi6c_05>; |
| 140 |
}; |
| 141 |
|
| 142 |
/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */ |
| 143 |
vcc3v3_ngff: regulator-vcc3v3-ngff { |
| 144 |
compatible = "regulator-fixed"; |
| 145 |
regulator-name = "vcc3v3_ngff"; |
| 146 |
regulator-min-microvolt = <3300000>; |
| 147 |
regulator-max-microvolt = <3300000>; |
| 148 |
enable-active-high; |
| 149 |
gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 150 |
pinctrl-names = "default"; |
| 151 |
pinctrl-0 = <&ngffpcie_enable_h>; |
| 152 |
startup-delay-us = <50000>; |
| 153 |
vin-supply = <&vcc3v3_pi6c_05>; |
| 154 |
}; |
| 155 |
|
| 156 |
vcc5v0_usb: regulator-vcc5v0-usb { |
| 157 |
compatible = "regulator-fixed"; |
| 158 |
regulator-name = "vcc5v0_usb"; |
| 159 |
regulator-always-on; |
| 160 |
regulator-boot-on; |
| 161 |
regulator-min-microvolt = <5000000>; |
| 162 |
regulator-max-microvolt = <5000000>; |
| 163 |
vin-supply = <&dc_12v>; |
| 164 |
}; |
| 165 |
|
| 166 |
vcc5v0_usb_host: regulator-vcc5v0-usb-host { |
| 167 |
compatible = "regulator-fixed"; |
| 168 |
enable-active-high; |
| 169 |
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| 170 |
pinctrl-names = "default"; |
| 171 |
pinctrl-0 = <&vcc5v0_usb_host_en>; |
| 172 |
regulator-name = "vcc5v0_usb_host"; |
| 173 |
regulator-min-microvolt = <5000000>; |
| 174 |
regulator-max-microvolt = <5000000>; |
| 175 |
vin-supply = <&vcc5v0_usb>; |
| 176 |
}; |
| 177 |
|
| 178 |
vcc5v0_usb_otg: regulator-vcc5v0-usb-otg { |
| 179 |
compatible = "regulator-fixed"; |
| 180 |
enable-active-high; |
| 181 |
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 182 |
pinctrl-names = "default"; |
| 183 |
pinctrl-0 = <&vcc5v0_usb_otg_en>; |
| 184 |
regulator-name = "vcc5v0_usb_otg"; |
| 185 |
regulator-min-microvolt = <5000000>; |
| 186 |
regulator-max-microvolt = <5000000>; |
| 187 |
vin-supply = <&vcc5v0_usb>; |
| 188 |
}; |
| 189 |
}; |
| 190 |
|
| 191 |
&combphy0 { |
| 192 |
/* used for USB3 */ |
| 193 |
status = "okay"; |
| 194 |
}; |
| 195 |
|
| 196 |
&combphy1 { |
| 197 |
/* used for USB3 */ |
| 198 |
status = "okay"; |
| 199 |
}; |
| 200 |
|
| 201 |
&combphy2 { |
| 202 |
/* used for SATA */ |
| 203 |
status = "okay"; |
| 204 |
}; |
| 205 |
|
| 206 |
&gmac0 { |
| 207 |
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; |
| 208 |
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; |
| 209 |
clock_in_out = "input"; |
| 210 |
phy-mode = "rgmii"; |
| 211 |
pinctrl-names = "default"; |
| 212 |
pinctrl-0 = <&gmac0_miim |
| 213 |
&gmac0_tx_bus2 |
| 214 |
&gmac0_rx_bus2 |
| 215 |
&gmac0_rgmii_clk |
| 216 |
&gmac0_rgmii_bus>; |
| 217 |
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; |
| 218 |
snps,reset-active-low; |
| 219 |
/* Reset time is 20ms, 100ms for rtl8211f */ |
| 220 |
snps,reset-delays-us = <0 20000 100000>; |
| 221 |
tx_delay = <0x4f>; |
| 222 |
rx_delay = <0x0f>; |
| 223 |
status = "okay"; |
| 224 |
|
| 225 |
fixed-link { |
| 226 |
speed = <1000>; |
| 227 |
full-duplex; |
| 228 |
pause; |
| 229 |
}; |
| 230 |
}; |
| 231 |
|
| 232 |
&gmac1 { |
| 233 |
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; |
| 234 |
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; |
| 235 |
clock_in_out = "output"; |
| 236 |
phy-handle = <&rgmii_phy1>; |
| 237 |
phy-mode = "rgmii"; |
| 238 |
pinctrl-names = "default"; |
| 239 |
pinctrl-0 = <&gmac1m1_miim |
| 240 |
&gmac1m1_tx_bus2 |
| 241 |
&gmac1m1_rx_bus2 |
| 242 |
&gmac1m1_rgmii_clk |
| 243 |
&gmac1m1_rgmii_bus>; |
| 244 |
|
| 245 |
snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; |
| 246 |
snps,reset-active-low; |
| 247 |
/* Reset time is 20ms, 100ms for rtl8211f */ |
| 248 |
snps,reset-delays-us = <0 20000 100000>; |
| 249 |
|
| 250 |
tx_delay = <0x3c>; |
| 251 |
rx_delay = <0x2f>; |
| 252 |
|
| 253 |
status = "okay"; |
| 254 |
}; |
| 255 |
|
| 256 |
&gpu { |
| 257 |
mali-supply = <&vdd_gpu>; |
| 258 |
status = "okay"; |
| 259 |
}; |
| 260 |
|
| 261 |
&hdmi { |
| 262 |
avdd-0v9-supply = <&vdda0v9_image>; |
| 263 |
avdd-1v8-supply = <&vcca1v8_image>; |
| 264 |
status = "okay"; |
| 265 |
}; |
| 266 |
|
| 267 |
&hdmi_in { |
| 268 |
hdmi_in_vp0: endpoint { |
| 269 |
remote-endpoint = <&vp0_out_hdmi>; |
| 270 |
}; |
| 271 |
}; |
| 272 |
|
| 273 |
&hdmi_out { |
| 274 |
hdmi_out_con: endpoint { |
| 275 |
remote-endpoint = <&hdmi_con_in>; |
| 276 |
}; |
| 277 |
}; |
| 278 |
|
| 279 |
&hdmi_sound { |
| 280 |
status = "okay"; |
| 281 |
}; |
| 282 |
|
| 283 |
&i2c0 { |
| 284 |
status = "okay"; |
| 285 |
|
| 286 |
rk809: pmic@20 { |
| 287 |
compatible = "rockchip,rk809"; |
| 288 |
reg = <0x20>; |
| 289 |
interrupt-parent = <&gpio0>; |
| 290 |
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; |
| 291 |
#clock-cells = <1>; |
| 292 |
pinctrl-names = "default"; |
| 293 |
pinctrl-0 = <&pmic_int>; |
| 294 |
system-power-controller; |
| 295 |
vcc1-supply = <&vcc3v3_sys>; |
| 296 |
vcc2-supply = <&vcc3v3_sys>; |
| 297 |
vcc3-supply = <&vcc3v3_sys>; |
| 298 |
vcc4-supply = <&vcc3v3_sys>; |
| 299 |
vcc5-supply = <&vcc3v3_sys>; |
| 300 |
vcc6-supply = <&vcc3v3_sys>; |
| 301 |
vcc7-supply = <&vcc3v3_sys>; |
| 302 |
vcc8-supply = <&vcc3v3_sys>; |
| 303 |
vcc9-supply = <&vcc3v3_sys>; |
| 304 |
wakeup-source; |
| 305 |
|
| 306 |
regulators { |
| 307 |
vdd_logic: DCDC_REG1 { |
| 308 |
regulator-name = "vdd_logic"; |
| 309 |
regulator-always-on; |
| 310 |
regulator-boot-on; |
| 311 |
regulator-initial-mode = <0x2>; |
| 312 |
regulator-min-microvolt = <500000>; |
| 313 |
regulator-max-microvolt = <1350000>; |
| 314 |
regulator-ramp-delay = <6001>; |
| 315 |
|
| 316 |
regulator-state-mem { |
| 317 |
regulator-off-in-suspend; |
| 318 |
}; |
| 319 |
}; |
| 320 |
|
| 321 |
vdd_gpu: DCDC_REG2 { |
| 322 |
regulator-name = "vdd_gpu"; |
| 323 |
regulator-always-on; |
| 324 |
regulator-initial-mode = <0x2>; |
| 325 |
regulator-min-microvolt = <500000>; |
| 326 |
regulator-max-microvolt = <1350000>; |
| 327 |
regulator-ramp-delay = <6001>; |
| 328 |
|
| 329 |
regulator-state-mem { |
| 330 |
regulator-off-in-suspend; |
| 331 |
}; |
| 332 |
}; |
| 333 |
|
| 334 |
vcc_ddr: DCDC_REG3 { |
| 335 |
regulator-name = "vcc_ddr"; |
| 336 |
regulator-always-on; |
| 337 |
regulator-boot-on; |
| 338 |
regulator-initial-mode = <0x2>; |
| 339 |
|
| 340 |
regulator-state-mem { |
| 341 |
regulator-on-in-suspend; |
| 342 |
}; |
| 343 |
}; |
| 344 |
|
| 345 |
vdd_npu: DCDC_REG4 { |
| 346 |
regulator-name = "vdd_npu"; |
| 347 |
regulator-initial-mode = <0x2>; |
| 348 |
regulator-min-microvolt = <500000>; |
| 349 |
regulator-max-microvolt = <1350000>; |
| 350 |
regulator-ramp-delay = <6001>; |
| 351 |
|
| 352 |
regulator-state-mem { |
| 353 |
regulator-off-in-suspend; |
| 354 |
}; |
| 355 |
}; |
| 356 |
|
| 357 |
vcc_1v8: DCDC_REG5 { |
| 358 |
regulator-name = "vcc_1v8"; |
| 359 |
regulator-always-on; |
| 360 |
regulator-boot-on; |
| 361 |
regulator-min-microvolt = <1800000>; |
| 362 |
regulator-max-microvolt = <1800000>; |
| 363 |
|
| 364 |
regulator-state-mem { |
| 365 |
regulator-off-in-suspend; |
| 366 |
}; |
| 367 |
}; |
| 368 |
|
| 369 |
vdda0v9_image: LDO_REG1 { |
| 370 |
regulator-name = "vdda0v9_image"; |
| 371 |
regulator-always-on; |
| 372 |
regulator-min-microvolt = <900000>; |
| 373 |
regulator-max-microvolt = <900000>; |
| 374 |
|
| 375 |
regulator-state-mem { |
| 376 |
regulator-off-in-suspend; |
| 377 |
}; |
| 378 |
}; |
| 379 |
|
| 380 |
vdda_0v9: LDO_REG2 { |
| 381 |
regulator-name = "vdda_0v9"; |
| 382 |
regulator-always-on; |
| 383 |
regulator-boot-on; |
| 384 |
regulator-min-microvolt = <900000>; |
| 385 |
regulator-max-microvolt = <900000>; |
| 386 |
|
| 387 |
regulator-state-mem { |
| 388 |
regulator-off-in-suspend; |
| 389 |
}; |
| 390 |
}; |
| 391 |
|
| 392 |
vdda0v9_pmu: LDO_REG3 { |
| 393 |
regulator-name = "vdda0v9_pmu"; |
| 394 |
regulator-always-on; |
| 395 |
regulator-boot-on; |
| 396 |
regulator-min-microvolt = <900000>; |
| 397 |
regulator-max-microvolt = <900000>; |
| 398 |
|
| 399 |
regulator-state-mem { |
| 400 |
regulator-on-in-suspend; |
| 401 |
regulator-suspend-microvolt = <900000>; |
| 402 |
}; |
| 403 |
}; |
| 404 |
|
| 405 |
vccio_acodec: LDO_REG4 { |
| 406 |
regulator-name = "vccio_acodec"; |
| 407 |
regulator-always-on; |
| 408 |
regulator-boot-on; |
| 409 |
regulator-min-microvolt = <3300000>; |
| 410 |
regulator-max-microvolt = <3300000>; |
| 411 |
|
| 412 |
regulator-state-mem { |
| 413 |
regulator-off-in-suspend; |
| 414 |
}; |
| 415 |
}; |
| 416 |
|
| 417 |
vccio_sd: LDO_REG5 { |
| 418 |
regulator-name = "vccio_sd"; |
| 419 |
regulator-always-on; |
| 420 |
regulator-boot-on; |
| 421 |
regulator-min-microvolt = <1800000>; |
| 422 |
regulator-max-microvolt = <3300000>; |
| 423 |
|
| 424 |
regulator-state-mem { |
| 425 |
regulator-off-in-suspend; |
| 426 |
}; |
| 427 |
}; |
| 428 |
|
| 429 |
vcc3v3_pmu: LDO_REG6 { |
| 430 |
regulator-name = "vcc3v3_pmu"; |
| 431 |
regulator-always-on; |
| 432 |
regulator-boot-on; |
| 433 |
regulator-min-microvolt = <3300000>; |
| 434 |
regulator-max-microvolt = <3300000>; |
| 435 |
|
| 436 |
regulator-state-mem { |
| 437 |
regulator-on-in-suspend; |
| 438 |
regulator-suspend-microvolt = <3300000>; |
| 439 |
}; |
| 440 |
}; |
| 441 |
|
| 442 |
vcca_1v8: LDO_REG7 { |
| 443 |
regulator-name = "vcca_1v8"; |
| 444 |
regulator-always-on; |
| 445 |
regulator-boot-on; |
| 446 |
regulator-min-microvolt = <1800000>; |
| 447 |
regulator-max-microvolt = <1800000>; |
| 448 |
|
| 449 |
regulator-state-mem { |
| 450 |
regulator-off-in-suspend; |
| 451 |
}; |
| 452 |
}; |
| 453 |
|
| 454 |
vcca1v8_pmu: LDO_REG8 { |
| 455 |
regulator-name = "vcca1v8_pmu"; |
| 456 |
regulator-always-on; |
| 457 |
regulator-boot-on; |
| 458 |
regulator-min-microvolt = <1800000>; |
| 459 |
regulator-max-microvolt = <1800000>; |
| 460 |
|
| 461 |
regulator-state-mem { |
| 462 |
regulator-on-in-suspend; |
| 463 |
regulator-suspend-microvolt = <1800000>; |
| 464 |
}; |
| 465 |
}; |
| 466 |
|
| 467 |
vcca1v8_image: LDO_REG9 { |
| 468 |
regulator-name = "vcca1v8_image"; |
| 469 |
regulator-always-on; |
| 470 |
regulator-min-microvolt = <1800000>; |
| 471 |
regulator-max-microvolt = <1800000>; |
| 472 |
|
| 473 |
regulator-state-mem { |
| 474 |
regulator-off-in-suspend; |
| 475 |
}; |
| 476 |
}; |
| 477 |
|
| 478 |
vcc_3v3: SWITCH_REG1 { |
| 479 |
regulator-name = "vcc_3v3"; |
| 480 |
regulator-always-on; |
| 481 |
regulator-boot-on; |
| 482 |
|
| 483 |
regulator-state-mem { |
| 484 |
regulator-off-in-suspend; |
| 485 |
}; |
| 486 |
}; |
| 487 |
|
| 488 |
vcc3v3_sd: SWITCH_REG2 { |
| 489 |
regulator-name = "vcc3v3_sd"; |
| 490 |
regulator-always-on; |
| 491 |
|
| 492 |
regulator-state-mem { |
| 493 |
regulator-off-in-suspend; |
| 494 |
}; |
| 495 |
}; |
| 496 |
}; |
| 497 |
}; |
| 498 |
}; |
| 499 |
|
| 500 |
&i2c3 { |
| 501 |
status = "okay"; |
| 502 |
|
| 503 |
hym8563: rtc@51 { |
| 504 |
compatible = "haoyu,hym8563"; |
| 505 |
reg = <0x51>; |
| 506 |
interrupt-parent = <&gpio0>; |
| 507 |
interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>; |
| 508 |
#clock-cells = <0>; |
| 509 |
clock-output-names = "rtcic_32kout"; |
| 510 |
pinctrl-names = "default"; |
| 511 |
pinctrl-0 = <&hym8563_int>; |
| 512 |
wakeup-source; |
| 513 |
}; |
| 514 |
}; |
| 515 |
|
| 516 |
&i2c5 { |
| 517 |
/* pin 3 (SDA) + 4 (SCL) of header con2 */ |
| 518 |
status = "disabled"; |
| 519 |
}; |
| 520 |
|
| 521 |
&i2s0_8ch { |
| 522 |
/* hdmi sound */ |
| 523 |
status = "okay"; |
| 524 |
}; |
| 525 |
|
| 526 |
&mdio0 { |
| 527 |
#address-cells = <1>; |
| 528 |
#size-cells = <0>; |
| 529 |
|
| 530 |
switch@1f { |
| 531 |
compatible = "mediatek,mt7531"; |
| 532 |
reg = <0x1f>; |
| 533 |
|
| 534 |
ports { |
| 535 |
#address-cells = <1>; |
| 536 |
#size-cells = <0>; |
| 537 |
|
| 538 |
port@1 { |
| 539 |
reg = <1>; |
| 540 |
label = "lan0"; |
| 541 |
}; |
| 542 |
|
| 543 |
port@2 { |
| 544 |
reg = <2>; |
| 545 |
label = "lan1"; |
| 546 |
}; |
| 547 |
|
| 548 |
port@3 { |
| 549 |
reg = <3>; |
| 550 |
label = "lan2"; |
| 551 |
}; |
| 552 |
|
| 553 |
port@4 { |
| 554 |
reg = <4>; |
| 555 |
label = "lan3"; |
| 556 |
}; |
| 557 |
|
| 558 |
port@5 { |
| 559 |
reg = <5>; |
| 560 |
label = "cpu"; |
| 561 |
ethernet = <&gmac0>; |
| 562 |
phy-mode = "rgmii"; |
| 563 |
|
| 564 |
fixed-link { |
| 565 |
speed = <1000>; |
| 566 |
full-duplex; |
| 567 |
pause; |
| 568 |
}; |
| 569 |
}; |
| 570 |
}; |
| 571 |
}; |
| 572 |
}; |
| 573 |
|
| 574 |
&mdio1 { |
| 575 |
rgmii_phy1: ethernet-phy@0 { |
| 576 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 577 |
reg = <0x0>; |
| 578 |
}; |
| 579 |
}; |
| 580 |
|
| 581 |
&pcie30phy { |
| 582 |
data-lanes = <1 2>; |
| 583 |
phy-supply = <&vcc3v3_pi6c_05>; |
| 584 |
status = "okay"; |
| 585 |
}; |
| 586 |
|
| 587 |
&pcie3x1 { |
| 588 |
/* M.2 slot */ |
| 589 |
num-lanes = <1>; |
| 590 |
pinctrl-names = "default"; |
| 591 |
pinctrl-0 = <&ngffpcie_reset_h>; |
| 592 |
reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; |
| 593 |
vpcie3v3-supply = <&vcc3v3_ngff>; |
| 594 |
status = "okay"; |
| 595 |
}; |
| 596 |
|
| 597 |
&pcie3x2 { |
| 598 |
/* mPCIe slot */ |
| 599 |
num-lanes = <1>; |
| 600 |
pinctrl-names = "default"; |
| 601 |
pinctrl-0 = <&minipcie_reset_h>; |
| 602 |
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; |
| 603 |
vpcie3v3-supply = <&vcc3v3_minipcie>; |
| 604 |
status = "okay"; |
| 605 |
}; |
| 606 |
|
| 607 |
&pinctrl { |
| 608 |
leds { |
| 609 |
blue_led_pin: blue-led-pin { |
| 610 |
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 611 |
}; |
| 612 |
green_led_pin: green-led-pin { |
| 613 |
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 614 |
}; |
| 615 |
}; |
| 616 |
|
| 617 |
hym8563 { |
| 618 |
hym8563_int: hym8563-int { |
| 619 |
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 620 |
}; |
| 621 |
}; |
| 622 |
|
| 623 |
ir-receiver { |
| 624 |
ir_receiver_pin: ir-receiver-pin { |
| 625 |
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 626 |
}; |
| 627 |
}; |
| 628 |
|
| 629 |
pcie { |
| 630 |
minipcie_enable_h: minipcie-enable-h { |
| 631 |
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; |
| 632 |
}; |
| 633 |
|
| 634 |
ngffpcie_enable_h: ngffpcie-enable-h { |
| 635 |
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; |
| 636 |
}; |
| 637 |
|
| 638 |
minipcie_reset_h: minipcie-reset-h { |
| 639 |
rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; |
| 640 |
}; |
| 641 |
|
| 642 |
ngffpcie_reset_h: ngffpcie-reset-h { |
| 643 |
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>; |
| 644 |
}; |
| 645 |
}; |
| 646 |
|
| 647 |
pmic { |
| 648 |
pmic_int: pmic_int { |
| 649 |
rockchip,pins = |
| 650 |
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 651 |
}; |
| 652 |
}; |
| 653 |
|
| 654 |
usb { |
| 655 |
vcc5v0_usb_host_en: vcc5v0_usb_host_en { |
| 656 |
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 657 |
}; |
| 658 |
|
| 659 |
vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { |
| 660 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 661 |
}; |
| 662 |
}; |
| 663 |
}; |
| 664 |
|
| 665 |
&pmu_io_domains { |
| 666 |
pmuio1-supply = <&vcc3v3_pmu>; |
| 667 |
pmuio2-supply = <&vcc3v3_pmu>; |
| 668 |
vccio1-supply = <&vccio_acodec>; |
| 669 |
vccio3-supply = <&vccio_sd>; |
| 670 |
vccio4-supply = <&vcc_3v3>; |
| 671 |
vccio5-supply = <&vcc_3v3>; |
| 672 |
vccio6-supply = <&vcc_1v8>; |
| 673 |
vccio7-supply = <&vcc_3v3>; |
| 674 |
status = "okay"; |
| 675 |
}; |
| 676 |
|
| 677 |
&pwm8 { |
| 678 |
/* fan 5v - gnd - pwm */ |
| 679 |
status = "okay"; |
| 680 |
}; |
| 681 |
|
| 682 |
&pwm10 { |
| 683 |
/* pin 7 of header con2 */ |
| 684 |
status = "disabled"; |
| 685 |
}; |
| 686 |
|
| 687 |
&pwm11 { |
| 688 |
/* pin 15 of header con2 */ |
| 689 |
status = "disabled"; |
| 690 |
}; |
| 691 |
|
| 692 |
&pwm12 { |
| 693 |
/* pin 21 of header con2 */ |
| 694 |
/* shared with uart9 + spi3 */ |
| 695 |
pinctrl-0 = <&pwm12m1_pins>; |
| 696 |
status = "disabled"; |
| 697 |
}; |
| 698 |
|
| 699 |
&pwm13 { |
| 700 |
/* pin 24 of header con2 */ |
| 701 |
/* shared with uart9 */ |
| 702 |
pinctrl-0 = <&pwm13m1_pins>; |
| 703 |
status = "disabled"; |
| 704 |
}; |
| 705 |
|
| 706 |
&pwm14 { |
| 707 |
/* pin 23 of header con2 */ |
| 708 |
/* shared with spi3 */ |
| 709 |
pinctrl-0 = <&pwm14m1_pins>; |
| 710 |
status = "disabled"; |
| 711 |
}; |
| 712 |
|
| 713 |
&pwm15 { |
| 714 |
/* pin 19 of header con2 */ |
| 715 |
/* shared with spi3 */ |
| 716 |
pinctrl-0 = <&pwm15m1_pins>; |
| 717 |
status = "disabled"; |
| 718 |
}; |
| 719 |
|
| 720 |
&saradc { |
| 721 |
vref-supply = <&vcca_1v8>; |
| 722 |
status = "okay"; |
| 723 |
}; |
| 724 |
|
| 725 |
&sata2 { |
| 726 |
status = "okay"; |
| 727 |
}; |
| 728 |
|
| 729 |
&sdhci { |
| 730 |
bus-width = <8>; |
| 731 |
max-frequency = <200000000>; |
| 732 |
non-removable; |
| 733 |
pinctrl-names = "default"; |
| 734 |
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; |
| 735 |
status = "okay"; |
| 736 |
}; |
| 737 |
|
| 738 |
&sdmmc0 { |
| 739 |
bus-width = <4>; |
| 740 |
cap-sd-highspeed; |
| 741 |
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 742 |
disable-wp; |
| 743 |
pinctrl-names = "default"; |
| 744 |
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; |
| 745 |
sd-uhs-sdr104; |
| 746 |
vmmc-supply = <&vcc3v3_sd>; |
| 747 |
vqmmc-supply = <&vccio_sd>; |
| 748 |
status = "okay"; |
| 749 |
}; |
| 750 |
|
| 751 |
&spi3 { |
| 752 |
/* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */ |
| 753 |
/* shared with pwm12/14/15 and uart9 */ |
| 754 |
pinctrl-0 = <&spi3m1_pins>; |
| 755 |
status = "disabled"; |
| 756 |
}; |
| 757 |
|
| 758 |
&tsadc { |
| 759 |
rockchip,hw-tshut-mode = <1>; |
| 760 |
rockchip,hw-tshut-polarity = <0>; |
| 761 |
status = "okay"; |
| 762 |
}; |
| 763 |
|
| 764 |
&uart0 { |
| 765 |
/* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */ |
| 766 |
status = "disabled"; |
| 767 |
}; |
| 768 |
|
| 769 |
&uart2 { |
| 770 |
/* debug-uart */ |
| 771 |
status = "okay"; |
| 772 |
}; |
| 773 |
|
| 774 |
&uart7 { |
| 775 |
/* pin 11 (TX) + 13 (RX) of header con2 */ |
| 776 |
pinctrl-0 = <&uart7m1_xfer>; |
| 777 |
status = "disabled"; |
| 778 |
}; |
| 779 |
|
| 780 |
&uart9 { |
| 781 |
/* pin 21 (TX) + 24 (RX) of header con2 */ |
| 782 |
/* shared with pwm13 and pwm12/spi3 */ |
| 783 |
pinctrl-0 = <&uart9m1_xfer>; |
| 784 |
status = "disabled"; |
| 785 |
}; |
| 786 |
|
| 787 |
&usb_host0_ehci { |
| 788 |
status = "okay"; |
| 789 |
}; |
| 790 |
|
| 791 |
&usb_host0_ohci { |
| 792 |
status = "okay"; |
| 793 |
}; |
| 794 |
|
| 795 |
&usb_host0_xhci { |
| 796 |
dr_mode = "host"; |
| 797 |
status = "okay"; |
| 798 |
}; |
| 799 |
|
| 800 |
&usb_host1_ehci { |
| 801 |
status = "okay"; |
| 802 |
}; |
| 803 |
|
| 804 |
&usb_host1_ohci { |
| 805 |
status = "okay"; |
| 806 |
}; |
| 807 |
|
| 808 |
&usb_host1_xhci { |
| 809 |
status = "okay"; |
| 810 |
}; |
| 811 |
|
| 812 |
&usb2phy0 { |
| 813 |
status = "okay"; |
| 814 |
}; |
| 815 |
|
| 816 |
&usb2phy0_host { |
| 817 |
phy-supply = <&vcc5v0_usb_host>; |
| 818 |
status = "okay"; |
| 819 |
}; |
| 820 |
|
| 821 |
&usb2phy0_otg { |
| 822 |
phy-supply = <&vcc5v0_usb_otg>; |
| 823 |
status = "okay"; |
| 824 |
}; |
| 825 |
|
| 826 |
&usb2phy1 { |
| 827 |
/* USB for PCIe/M2 */ |
| 828 |
status = "okay"; |
| 829 |
}; |
| 830 |
|
| 831 |
&usb2phy1_host { |
| 832 |
status = "okay"; |
| 833 |
}; |
| 834 |
|
| 835 |
&usb2phy1_otg { |
| 836 |
status = "okay"; |
| 837 |
}; |
| 838 |
|
| 839 |
&vop { |
| 840 |
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| 841 |
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 842 |
status = "okay"; |
| 843 |
}; |
| 844 |
|
| 845 |
&vop_mmu { |
| 846 |
status = "okay"; |
| 847 |
}; |
| 848 |
|
| 849 |
&vp0 { |
| 850 |
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 851 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 852 |
remote-endpoint = <&hdmi_in_vp0>; |
| 853 |
}; |
| 854 |
}; |