Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3568-anbernic-rg-ds.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3 /dts-v1/;
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/gpio-keys.h>
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/pinctrl/rockchip.h>
10 #include <dt-bindings/soc/rockchip,vop2.h>
11 #include "rk3568.dtsi"
12
13 / {
14 model = "Anbernic RG DS";
15 chassis-type = "handset";
16 compatible = "anbernic,rg-ds", "rockchip,rk3568";
17
18 aliases {
19 mmc0 = &sdhci;
20 mmc1 = &sdmmc0;
21 mmc2 = &sdmmc2;
22 };
23
24 chosen: chosen {
25 stdout-path = "serial2:1500000n8";
26 };
27
28 adc_keys_home: adc-keys-home {
29 compatible = "adc-keys";
30 io-channel-names = "buttons";
31 io-channels = <&saradc 0>;
32 keyup-threshold-microvolt = <1800000>;
33 poll-interval = <60>;
34
35 button-home {
36 label = "HOME";
37 linux,code = <BTN_MODE>;
38 press-threshold-microvolt = <1750>;
39 };
40 };
41
42 adc_keys_play: adc-keys-play {
43 compatible = "adc-keys";
44 io-channel-names = "buttons";
45 io-channels = <&saradc 2>;
46 keyup-threshold-microvolt = <1300000>;
47 poll-interval = <60>;
48
49 button-play {
50 label = "PLAY";
51 linux,code = <KEY_PLAYPAUSE>;
52 press-threshold-microvolt = <1750>;
53 };
54 };
55
56 adc_mux: adc-mux {
57 compatible = "io-channel-mux";
58 channels = "left_x", "right_x", "left_y", "right_y";
59 #io-channel-cells = <1>;
60 io-channels = <&saradc 3>;
61 io-channel-names = "parent";
62 mux-controls = <&gpio_mux>;
63 settle-time-us = <100>;
64 };
65
66 adc-joystick {
67 compatible = "adc-joystick";
68 #address-cells = <1>;
69 io-channels = <&adc_mux 0>,
70 <&adc_mux 1>,
71 <&adc_mux 2>,
72 <&adc_mux 3>;
73 pinctrl-0 = <&joy_mux_en>;
74 pinctrl-names = "default";
75 poll-interval = <60>;
76 #size-cells = <0>;
77
78 axis@0 {
79 reg = <0>;
80 abs-flat = <32>;
81 abs-fuzz = <32>;
82 abs-range = <1023 15>;
83 linux,code = <ABS_X>;
84 };
85
86 axis@1 {
87 reg = <1>;
88 abs-flat = <32>;
89 abs-fuzz = <32>;
90 abs-range = <15 1023>;
91 linux,code = <ABS_RY>;
92 };
93
94 axis@2 {
95 reg = <2>;
96 abs-flat = <32>;
97 abs-fuzz = <32>;
98 abs-range = <15 1023>;
99 linux,code = <ABS_Y>;
100 };
101
102 axis@3 {
103 reg = <3>;
104 abs-flat = <32>;
105 abs-fuzz = <32>;
106 abs-range = <15 1023>;
107 linux,code = <ABS_RX>;
108 };
109 };
110
111 backlight0: backlight0 {
112 compatible = "pwm-backlight";
113 enable-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
114 pwms = <&pwm12 0 25000 0>;
115 };
116
117 backlight1: backlight1 {
118 compatible = "pwm-backlight";
119 enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
120 pwms = <&pwm13 0 25000 0>;
121 };
122
123 /*
124 * Values taken from BSP device-tree except for
125 * "charge-full-design-microamp-hours" which was set
126 * incorrectly at 2500000 (based on markings on the battery it
127 * should be 4000000), "factory-internal-resistance-micro-ohms"
128 * which was set at 8 but based on context should likely be 80000.
129 *
130 * "constant-charge-current-max-microamp" is set at 10 AMPs
131 * which is likely incorrect but I cannot validate; furthermore
132 * the onboard charger of the rk817 cannot charge past 3.5A
133 * anyway.
134 */
135 battery: battery {
136 compatible = "simple-battery";
137 charge-full-design-microamp-hours = <4000000>;
138 charge-term-current-microamp = <300000>;
139 constant-charge-current-max-microamp = <10000000>;
140 constant-charge-voltage-max-microvolt = <4350000>;
141 factory-internal-resistance-micro-ohms = <80000>;
142 precharge-current-microamp = <180000>;
143 precharge-upper-limit-microvolt = <3600000>;
144 voltage-max-design-microvolt = <4350000>;
145 voltage-min-design-microvolt = <3000000>;
146
147 /*
148 * BSP device-tree missing value for 5 percent, so I
149 * picked a value between 10 and 0.
150 */
151 ocv-capacity-celsius = <20>;
152 ocv-capacity-table-0 = <4338000 100>, <4251000 95>,
153 <4191000 90>, <4136000 85>,
154 <4083000 80>, <4039000 75>,
155 <3978000 70>, <3947000 65>,
156 <3908000 60>, <3861000 55>,
157 <3826000 50>, <3786000 45>,
158 <3772000 40>, <3761000 35>,
159 <3749000 30>, <3731000 25>,
160 <3707000 20>, <3677000 15>,
161 <3663000 10>, <3446000 5>,
162 <3400000 0>;
163 };
164
165 gpio_keys_control: gpio-keys-control {
166 compatible = "gpio-keys";
167 pinctrl-0 = <&gamepad_keys_l>;
168 pinctrl-names = "default";
169
170 button-a {
171 gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
172 label = "EAST";
173 linux,code = <BTN_EAST>;
174 };
175
176 button-b {
177 gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
178 label = "SOUTH";
179 linux,code = <BTN_SOUTH>;
180 };
181
182 button-down {
183 gpios = <&gpio2 RK_PD5 GPIO_ACTIVE_LOW>;
184 label = "DPAD-DOWN";
185 linux,code = <BTN_DPAD_DOWN>;
186 };
187
188 button-l1 {
189 gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
190 label = "TL";
191 linux,code = <BTN_TL>;
192 };
193
194 button-l2 {
195 gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
196 label = "TL2";
197 linux,code = <BTN_TL2>;
198 };
199
200 button-left {
201 gpios = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>;
202 label = "DPAD-LEFT";
203 linux,code = <BTN_DPAD_LEFT>;
204 };
205
206 button-menu {
207 gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
208 label = "HOME";
209 linux,code = <KEY_HOME>;
210 };
211
212 button-right {
213 gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
214 label = "DPAD-RIGHT";
215 linux,code = <BTN_DPAD_RIGHT>;
216 };
217
218 button-r1 {
219 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
220 label = "T2";
221 linux,code = <BTN_TR>;
222 };
223
224 button-r2 {
225 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
226 label = "TR2";
227 linux,code = <BTN_TR2>;
228 };
229
230 button-select {
231 gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
232 label = "SELECT";
233 linux,code = <BTN_SELECT>;
234 };
235
236 button-start {
237 gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
238 label = "START";
239 linux,code = <BTN_START>;
240 };
241
242 button-thumbl {
243 gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_LOW>;
244 label = "THUMBL";
245 linux,code = <BTN_THUMBL>;
246 };
247
248 button-thumbr {
249 gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
250 label = "THUMBR";
251 linux,code = <BTN_THUMBR>;
252 };
253
254 button-up {
255 gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>;
256 label = "DPAD-UP";
257 linux,code = <BTN_DPAD_UP>;
258 };
259
260 button-x {
261 gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
262 label = "NORTH";
263 linux,code = <BTN_NORTH>;
264 };
265
266 button-y {
267 gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
268 label = "WEST";
269 linux,code = <BTN_WEST>;
270 };
271 };
272
273 gpio_keys_hall: gpio-keys-hall {
274 compatible = "gpio-keys";
275 pinctrl-0 = <&hall_int_l>;
276 pinctrl-names = "default";
277
278 lid-switch {
279 gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
280 label = "LID";
281 linux,code = <SW_LID>;
282 linux,input-type = <EV_SW>;
283 wakeup-event-action = <EV_ACT_DEASSERTED>;
284 wakeup-source;
285 };
286 };
287
288 gpio_keys_volume: gpio-keys-volume {
289 compatible = "gpio-keys";
290 autorepeat;
291 pinctrl-0 = <&vol_keys_l>;
292 pinctrl-names = "default";
293
294 vol-down-key {
295 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
296 label = "VOLUMEDOWN";
297 linux,code = <KEY_VOLUMEDOWN>;
298 };
299
300 vol-up-key {
301 gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
302 label = "VOLUMEUP";
303 linux,code = <KEY_VOLUMEUP>;
304 };
305 };
306
307 gpio_mux: mux-controller {
308 compatible = "gpio-mux";
309 #mux-control-cells = <0>;
310 mux-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>,
311 <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
312 pinctrl-0 = <&joy_mux_config>;
313 pinctrl-names = "default";
314 };
315
316 leds: pwm-leds {
317 compatible = "pwm-leds";
318
319 green_led: led-0 {
320 color = <LED_COLOR_ID_GREEN>;
321 default-state = "on";
322 function = LED_FUNCTION_POWER;
323 max-brightness = <255>;
324 pwms = <&pwm5 0 25000 0>;
325 };
326
327 amber_led: led-1 {
328 color = <LED_COLOR_ID_AMBER>;
329 function = LED_FUNCTION_CHARGING;
330 max-brightness = <255>;
331 pwms = <&pwm6 0 25000 0>;
332 };
333
334 red_led: led-2 {
335 color = <LED_COLOR_ID_RED>;
336 default-state = "off";
337 function = LED_FUNCTION_STATUS;
338 max-brightness = <255>;
339 pwms = <&pwm7 0 25000 0>;
340 };
341 };
342
343 sdio_pwrseq: sdio-pwrseq {
344 compatible = "mmc-pwrseq-simple";
345 clock-names = "ext_clock";
346 clocks = <&rk817 1>;
347 pinctrl-0 = <&wifi_enable_h>;
348 pinctrl-names = "default";
349 post-power-on-delay-ms = <200>;
350 reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
351 };
352
353 sound {
354 compatible = "simple-audio-card";
355 pinctrl-0 = <&hp_det>;
356 pinctrl-names = "default";
357 simple-audio-card,format = "i2s";
358 simple-audio-card,hp-det-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
359 simple-audio-card,mclk-fs = <256>;
360 simple-audio-card,name = "rk817_ext";
361 simple-audio-card,pin-switches = "Internal Speakers";
362 simple-audio-card,routing =
363 "MICL", "Mic Jack",
364 "Headphones", "HPOL",
365 "Headphones", "HPOR",
366 "Internal Speakers", "HPOL",
367 "Internal Speakers", "HPOR";
368 simple-audio-card,widgets =
369 "Microphone", "Mic Jack",
370 "Headphone", "Headphones",
371 "Speaker", "Internal Speakers";
372
373 simple-audio-card,codec {
374 sound-dai = <&rk817>;
375 };
376
377 simple-audio-card,cpu {
378 sound-dai = <&i2s1_8ch>;
379 };
380 };
381
382 vdd_lcd0: regulator-vdd-lcd0 {
383 compatible = "regulator-fixed";
384 enable-active-high;
385 gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
386 pinctrl-0 = <&vdd_lcd0_h>;
387 pinctrl-names = "default";
388 regulator-name = "vdd_lcd0";
389 regulator-state-mem {
390 regulator-off-in-suspend;
391 };
392 };
393
394 vccio_lcd0: regulator-vccio-lcd0 {
395 compatible = "regulator-fixed";
396 enable-active-high;
397 gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
398 pinctrl-0 = <&vccio_lcd0_h>;
399 pinctrl-names = "default";
400 regulator-name = "vccio_lcd0";
401 regulator-state-mem {
402 regulator-off-in-suspend;
403 };
404 };
405
406 vdd_lcd1: regulator-vdd-lcd1 {
407 compatible = "regulator-fixed";
408 enable-active-high;
409 gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
410 pinctrl-0 = <&vdd_lcd1_h>;
411 pinctrl-names = "default";
412 regulator-name = "vdd_lcd1";
413 regulator-state-mem {
414 regulator-off-in-suspend;
415 };
416 };
417
418 vccio_lcd1: regulator-vccio-lcd1 {
419 compatible = "regulator-fixed";
420 enable-active-high;
421 gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
422 pinctrl-0 = <&vccio_lcd1_h>;
423 pinctrl-names = "default";
424 regulator-name = "vccio_lcd1";
425 regulator-state-mem {
426 regulator-off-in-suspend;
427 };
428 };
429
430 vcc3v3_sd: regulator-vcc3v3-sd {
431 compatible = "regulator-fixed";
432 gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
433 pinctrl-0 = <&sdmmc_pwren_l>;
434 pinctrl-names = "default";
435 regulator-always-on;
436 regulator-boot-on;
437 regulator-name = "vcc3v3_sd";
438 regulator-min-microvolt = <3300000>;
439 regulator-max-microvolt = <3300000>;
440 vin-supply = <&vccio_sd>;
441 };
442
443 vcc_sys: regulator-vcc-sys {
444 compatible = "regulator-fixed";
445 regulator-always-on;
446 regulator-boot-on;
447 regulator-min-microvolt = <3800000>;
448 regulator-max-microvolt = <3800000>;
449 regulator-name = "vcc_sys";
450 };
451
452 vibrator: pwm-vibrator {
453 compatible = "pwm-vibrator";
454 pwm-names = "enable";
455 pwms = <&pwm14 0 100000 0>;
456 vcc-supply = <&vcc_sys>;
457 };
458
459 vcc_wifi: regulator-vcc-wifi {
460 compatible = "regulator-fixed";
461 enable-active-high;
462 gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
463 pinctrl-0 = <&vcc_wifi_h>;
464 pinctrl-names = "default";
465 regulator-always-on;
466 regulator-boot-on;
467 regulator-min-microvolt = <3300000>;
468 regulator-max-microvolt = <3300000>;
469 regulator-name = "vcc_wifi";
470 };
471 };
472
473 &cpu0 {
474 cpu-supply = <&vdd_cpu>;
475 };
476
477 &cpu1 {
478 cpu-supply = <&vdd_cpu>;
479 };
480
481 &cpu2 {
482 cpu-supply = <&vdd_cpu>;
483 };
484
485 &cpu3 {
486 cpu-supply = <&vdd_cpu>;
487 };
488
489 &cru {
490 assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
491 <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
492 assigned-clock-rates = <32768>, <1200000000>,
493 <200000000>, <292500000>;
494 };
495
496 &dsi0 {
497 status = "okay";
498 #address-cells = <1>;
499 #size-cells = <0>;
500
501 ports {
502 dsi0_in: port@0 {
503 reg = <0>;
504 dsi0_in_vp0: endpoint {
505 remote-endpoint = <&vp0_out_dsi0>;
506 };
507 };
508
509 dsi0_out: port@1 {
510 reg = <1>;
511 mipi_out_panel0: endpoint {
512 remote-endpoint = <&mipi_in_panel0>;
513 };
514 };
515 };
516
517 panel0: panel@0 {
518 compatible = "anbernic,rg-ds-display-bottom", "jadard,jd9365da-h3";
519 reg = <0>;
520 backlight = <&backlight0>;
521 pinctrl-0 = <&lcd0_rst>;
522 pinctrl-names = "default";
523 reset-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
524 vdd-supply = <&vdd_lcd0>;
525 vccio-supply = <&vccio_lcd0>;
526
527 port {
528 mipi_in_panel0: endpoint {
529 remote-endpoint = <&mipi_out_panel0>;
530 };
531 };
532 };
533 };
534
535 &dsi1 {
536 status = "okay";
537 #address-cells = <1>;
538 #size-cells = <0>;
539
540 ports {
541 dsi1_in: port@0 {
542 reg = <0>;
543 dsi1_in_vp1: endpoint {
544 remote-endpoint = <&vp1_out_dsi1>;
545 };
546 };
547
548 dsi1_out: port@1 {
549 reg = <1>;
550 mipi_out_panel1: endpoint {
551 remote-endpoint = <&mipi_in_panel1>;
552 };
553 };
554 };
555
556 panel1: panel@0 {
557 compatible = "anbernic,rg-ds-display-top", "jadard,jd9365da-h3";
558 reg = <0>;
559 backlight = <&backlight1>;
560 pinctrl-0 = <&lcd1_rst>;
561 pinctrl-names = "default";
562 reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
563 vdd-supply = <&vdd_lcd1>;
564 vccio-supply = <&vccio_lcd1>;
565
566 port {
567 mipi_in_panel1: endpoint {
568 remote-endpoint = <&mipi_out_panel1>;
569 };
570 };
571 };
572 };
573
574 &dsi_dphy0 {
575 status = "okay";
576 };
577
578 &dsi_dphy1 {
579 status = "okay";
580 };
581
582 &gpu {
583 mali-supply = <&vdd_gpu>;
584 status = "okay";
585 };
586
587 &i2c0 {
588 status = "okay";
589
590 rk817: pmic@20 {
591 compatible = "rockchip,rk817";
592 reg = <0x20>;
593 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
594 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
595 #clock-cells = <1>;
596 clock-names = "mclk";
597 clock-output-names = "rk808-clkout1", "rk808-clkout2";
598 clocks = <&cru I2S1_MCLKOUT_TX>;
599 interrupt-parent = <&gpio0>;
600 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
601 pinctrl-0 = <&i2s1m0_mclk &pmic_int_l>;
602 pinctrl-names = "default";
603 #sound-dai-cells = <0>;
604 system-power-controller;
605 wakeup-source;
606
607 vcc1-supply = <&vcc_sys>;
608 vcc2-supply = <&vcc_sys>;
609 vcc3-supply = <&vcc_sys>;
610 vcc4-supply = <&vcc_sys>;
611 vcc5-supply = <&vcc_sys>;
612 vcc6-supply = <&vcc_sys>;
613 vcc7-supply = <&vcc_sys>;
614 vcc8-supply = <&vcc_sys>;
615 vcc9-supply = <&dcdc_boost>;
616
617 regulators {
618 vdd_logic: DCDC_REG1 {
619 regulator-always-on;
620 regulator-boot-on;
621 regulator-initial-mode = <0x2>;
622 regulator-max-microvolt = <1350000>;
623 regulator-min-microvolt = <900000>;
624 regulator-name = "vdd_logic";
625 regulator-ramp-delay = <6001>;
626 regulator-state-mem {
627 regulator-on-in-suspend;
628 regulator-suspend-microvolt = <900000>;
629 };
630 };
631
632 vdd_gpu: DCDC_REG2 {
633 regulator-always-on;
634 regulator-boot-on;
635 regulator-initial-mode = <0x2>;
636 regulator-max-microvolt = <1350000>;
637 regulator-min-microvolt = <825000>;
638 regulator-name = "vdd_gpu";
639 regulator-ramp-delay = <6001>;
640 regulator-state-mem {
641 regulator-off-in-suspend;
642 };
643 };
644
645 vcc_ddr: DCDC_REG3 {
646 regulator-always-on;
647 regulator-boot-on;
648 regulator-initial-mode = <0x2>;
649 regulator-name = "vcc_ddr";
650 regulator-state-mem {
651 regulator-on-in-suspend;
652 };
653 };
654
655 vcc_3v3: DCDC_REG4 {
656 regulator-always-on;
657 regulator-boot-on;
658 regulator-initial-mode = <0x2>;
659 regulator-max-microvolt = <3300000>;
660 regulator-min-microvolt = <3300000>;
661 regulator-name = "vcc_3v3";
662 regulator-state-mem {
663 regulator-on-in-suspend;
664 regulator-suspend-microvolt = <3300000>;
665 };
666 };
667
668 vcca1v8_pmu: LDO_REG1 {
669 regulator-always-on;
670 regulator-boot-on;
671 regulator-max-microvolt = <1800000>;
672 regulator-min-microvolt = <1800000>;
673 regulator-name = "vcca1v8_pmu";
674 regulator-state-mem {
675 regulator-on-in-suspend;
676 regulator-suspend-microvolt = <1800000>;
677 };
678 };
679
680 vdda_0v9: LDO_REG2 {
681 regulator-always-on;
682 regulator-boot-on;
683 regulator-max-microvolt = <900000>;
684 regulator-min-microvolt = <900000>;
685 regulator-name = "vdda_0v9";
686 regulator-state-mem {
687 regulator-off-in-suspend;
688 };
689 };
690
691 vdda0v9_pmu: LDO_REG3 {
692 regulator-always-on;
693 regulator-boot-on;
694 regulator-max-microvolt = <900000>;
695 regulator-min-microvolt = <900000>;
696 regulator-name = "vdda0v9_pmu";
697 regulator-state-mem {
698 regulator-on-in-suspend;
699 regulator-suspend-microvolt = <900000>;
700 };
701 };
702
703 vccio_acodec: LDO_REG4 {
704 regulator-always-on;
705 regulator-boot-on;
706 regulator-max-microvolt = <3300000>;
707 regulator-min-microvolt = <3300000>;
708 regulator-name = "vccio_acodec";
709 regulator-state-mem {
710 regulator-off-in-suspend;
711 };
712 };
713
714 vccio_sd: LDO_REG5 {
715 regulator-always-on;
716 regulator-boot-on;
717 regulator-max-microvolt = <3300000>;
718 regulator-min-microvolt = <1800000>;
719 regulator-name = "vccio_sd";
720 regulator-state-mem {
721 regulator-off-in-suspend;
722 };
723 };
724
725 vcc3v3_pmu: LDO_REG6 {
726 regulator-always-on;
727 regulator-boot-on;
728 regulator-max-microvolt = <3300000>;
729 regulator-min-microvolt = <3300000>;
730 regulator-name = "vcc3v3_pmu";
731 regulator-state-mem {
732 regulator-on-in-suspend;
733 regulator-suspend-microvolt = <3300000>;
734 };
735 };
736
737 vcc_1v8: LDO_REG7 {
738 regulator-always-on;
739 regulator-boot-on;
740 regulator-max-microvolt = <1800000>;
741 regulator-min-microvolt = <1800000>;
742 regulator-name = "vcc_1v8";
743 regulator-state-mem {
744 regulator-on-in-suspend;
745 };
746 };
747
748 vcc1v8_dvp: LDO_REG8 {
749 regulator-always-on;
750 regulator-boot-on;
751 regulator-max-microvolt = <3300000>;
752 regulator-min-microvolt = <1800000>;
753 regulator-name = "vcc1v8_dvp";
754 regulator-state-mem {
755 regulator-off-in-suspend;
756 };
757 };
758
759 vcc2v8_dvp: LDO_REG9 {
760 regulator-always-on;
761 regulator-boot-on;
762 regulator-max-microvolt = <2800000>;
763 regulator-min-microvolt = <2800000>;
764 regulator-name = "vcc2v8_dvp";
765 regulator-state-mem {
766 regulator-off-in-suspend;
767 };
768 };
769
770 dcdc_boost: BOOST {
771 regulator-always-on;
772 regulator-boot-on;
773 regulator-max-microvolt = <5400000>;
774 regulator-min-microvolt = <4700000>;
775 regulator-name = "boost";
776 regulator-state-mem {
777 regulator-off-in-suspend;
778 };
779 };
780
781 otg_switch: OTG_SWITCH {
782 regulator-name = "otg_switch";
783 regulator-state-mem {
784 regulator-off-in-suspend;
785 };
786 };
787 };
788
789 rk817_charger: charger {
790 monitored-battery = <&battery>;
791 rockchip,resistor-sense-micro-ohms = <10000>;
792 rockchip,sleep-enter-current-microamp = <150000>;
793 rockchip,sleep-filter-current-microamp = <100000>;
794 };
795 };
796
797 vdd_cpu: regulator@40 {
798 compatible = "silergy,syr827";
799 reg = <0x40>;
800 fcs,suspend-voltage-selector = <1>;
801 regulator-always-on;
802 regulator-boot-on;
803 regulator-max-microvolt = <1390000>;
804 regulator-min-microvolt = <712500>;
805 regulator-name = "vdd_cpu";
806 regulator-ramp-delay = <2300>;
807 vin-supply = <&vcc_sys>;
808 regulator-state-mem {
809 regulator-off-in-suspend;
810 };
811 };
812
813 /*
814 * Currently the rk817_charger and the cw2015 don't work together.
815 * Disable the cw2015 for now because it performs the same function
816 * as the rk817_charger for battery monitoring.
817 */
818 cw2015: battery@62 {
819 compatible = "cellwise,cw2015";
820 reg = <0x62>;
821 cellwise,battery-profile = /bits/ 8
822 < 0x17 0x67 0x81 0x6F 0x69 0x65 0x63 0x54
823 0x75 0x50 0x57 0x56 0x4E 0x4F 0x44 0x35
824 0x2C 0x24 0x1E 0x1B 0x24 0x32 0x41 0x4D
825 0x1C 0x57 0x0B 0x85 0x34 0x54 0x59 0x6D
826 0x85 0x81 0x81 0x84 0x3C 0x1B 0x6C 0x6C
827 0x0B 0x41 0x1C 0x4D 0x80 0x95 0xA0 0x14
828 0x38 0x7E 0x98 0xA3 0x80 0x89 0x97 0xCB
829 0x2F 0x00 0x64 0xA5 0xB5 0xC1 0x46 0xAE>;
830 cellwise,monitor-interval-ms = <5000>;
831 monitored-battery = <&battery>;
832 power-supplies = <&rk817_charger>;
833 status = "disabled";
834 };
835 };
836
837 &i2c2 {
838 clock-frequency = <200000>;
839 pinctrl-0 = <&i2c2m1_xfer>;
840 pinctrl-names = "default";
841 status = "okay";
842
843 /* awinic,aw87391 at 0x58 */
844 /* awinic,aw87391 at 0x5b */
845 /* invensense,icm42607p at 0x68 */
846 };
847
848 &i2c3 {
849 clock-frequency = <400000>;
850 pinctrl-0 = <&i2c3m1_xfer>;
851 pinctrl-names = "default";
852 status = "okay";
853
854 touch1: touchscreen@14 {
855 compatible = "goodix,gt911";
856 reg = <0x14>;
857 AVDD28-supply = <&vcc2v8_dvp>;
858 interrupt-parent = <&gpio0>;
859 interrupts = <RK_PC0 IRQ_TYPE_LEVEL_LOW>;
860 irq-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
861 panel = <&panel1>;
862 reset-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
863 touchscreen-size-x = <640>;
864 touchscreen-size-y = <480>;
865 touchscreen-inverted-x;
866 touchscreen-inverted-y;
867 pinctrl-0 = <&touch1_rst &touch1_irq>;
868 pinctrl-names = "default";
869 VDDIO-supply = <&vcc3v3_pmu>;
870 };
871 };
872
873 &i2c5 {
874 clock-frequency = <400000>;
875 pinctrl-0 = <&i2c5m0_xfer>;
876 pinctrl-names = "default";
877 status = "okay";
878
879 touch0: touchscreen@14 {
880 compatible = "goodix,gt911";
881 reg = <0x14>;
882 AVDD28-supply = <&vcc2v8_dvp>;
883 interrupt-parent = <&gpio0>;
884 interrupts = <RK_PB6 IRQ_TYPE_LEVEL_LOW>;
885 irq-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
886 panel = <&panel0>;
887 reset-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
888 touchscreen-size-x = <640>;
889 touchscreen-size-y = <480>;
890 pinctrl-0 = <&touch0_rst &touch0_irq>;
891 pinctrl-names = "default";
892 VDDIO-supply = <&vcc3v3_pmu>;
893 };
894
895 /* Unused iSmartWare SW2001 encryption device at 0x3c */
896 };
897
898 &i2s1_8ch {
899 pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
900 pinctrl-names = "default";
901 rockchip,trcm-sync-tx-only;
902 status = "okay";
903 };
904
905 &pinctrl {
906 gpio-keys {
907 vol_keys_l: vol-keys_l {
908 rockchip,pins =
909 <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
910 <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
911 };
912
913 gamepad_keys_l: gamepad-keys-l {
914 rockchip,pins =
915 <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
916 <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
917 <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
918 <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
919 <2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
920 <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
921 <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
922 <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
923 <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
924 <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
925 <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
926 <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
927 <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
928 <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
929 <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
930 <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
931 <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
932 };
933 };
934
935 gpio-lcd {
936 lcd0_rst: lcd0-rst {
937 rockchip,pins =
938 <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
939 };
940
941 lcd1_rst: lcd1-rst {
942 rockchip,pins =
943 <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
944 };
945 };
946
947 hall-sensor {
948 hall_int_l: hal-int-l {
949 rockchip,pins =
950 <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
951 };
952 };
953
954 hp-detect {
955 hp_det: hp-det {
956 rockchip,pins =
957 <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
958 };
959 };
960
961 joy-mux {
962 joy_mux_en: joy-mux-en {
963 rockchip,pins =
964 <3 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
965 };
966
967 joy_mux_config: joy-mux-config {
968 rockchip,pins =
969 <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
970 <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
971 };
972 };
973
974 pmic {
975 pmic_int_l: pmic-int-l {
976 rockchip,pins =
977 <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
978 };
979 };
980
981 sdio-pwrseq {
982 wifi_enable_h: wifi-enable-h {
983 rockchip,pins =
984 <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
985 };
986 };
987
988 sdmmc {
989 sdmmc_pwren_l: sdmmc-pwren-l {
990 rockchip,pins =
991 <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
992 };
993 };
994
995 touch {
996 touch0_rst: touch0-rst {
997 rockchip,pins =
998 <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
999 };
1000
1001 touch0_irq: touch0-irq {
1002 rockchip,pins =
1003 <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
1004 };
1005
1006 touch1_rst: touch1-rst {
1007 rockchip,pins =
1008 <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
1009 };
1010
1011 touch1_irq: touch1-irq {
1012 rockchip,pins =
1013 <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
1014 };
1015 };
1016
1017 vcc-lcd {
1018 vdd_lcd0_h: vdd-lcd0-h {
1019 rockchip,pins =
1020 <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
1021 };
1022
1023 vccio_lcd0_h: vccio-lcd0-h {
1024 rockchip,pins =
1025 <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
1026 };
1027
1028 vdd_lcd1_h: vdd-lcd1-h {
1029 rockchip,pins =
1030 <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
1031 };
1032
1033 vccio_lcd1_h: vccio-lcd1-h {
1034 rockchip,pins =
1035 <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
1036 };
1037 };
1038
1039 vcc-wifi {
1040 vcc_wifi_h: vcc-wifi-h {
1041 rockchip,pins =
1042 <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
1043 };
1044 };
1045
1046 wifi-irq {
1047 wifi_host_wake_irq: wifi-host-wake-irq {
1048 rockchip,pins =
1049 <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
1050 };
1051 };
1052 };
1053
1054 &pmu_io_domains {
1055 status = "okay";
1056 pmuio1-supply = <&vcc3v3_pmu>;
1057 pmuio2-supply = <&vcc3v3_pmu>;
1058 vccio1-supply = <&vccio_acodec>;
1059 vccio3-supply = <&vccio_sd>;
1060 vccio4-supply = <&vcc_3v3>;
1061 vccio5-supply = <&vcc_3v3>;
1062 vccio6-supply = <&vcc_1v8>;
1063 vccio7-supply = <&vcc_3v3>;
1064 };
1065
1066 &pwm5 {
1067 pinctrl-0 = <&pwm5_pins>;
1068 pinctrl-names = "default";
1069 status = "okay";
1070 };
1071
1072 &pwm6 {
1073 pinctrl-0 = <&pwm6_pins>;
1074 pinctrl-names = "default";
1075 status = "okay";
1076 };
1077
1078 &pwm7 {
1079 pinctrl-0 = <&pwm7_pins>;
1080 pinctrl-names = "default";
1081 status = "okay";
1082 };
1083
1084 &pwm12 {
1085 pinctrl-0 = <&pwm12m1_pins>;
1086 pinctrl-names = "default";
1087 status = "okay";
1088 };
1089
1090 &pwm13 {
1091 pinctrl-0 = <&pwm13m1_pins>;
1092 pinctrl-names = "default";
1093 status = "okay";
1094 };
1095
1096 &pwm14 {
1097 pinctrl-0 = <&pwm14m0_pins>;
1098 pinctrl-names = "default";
1099 status = "okay";
1100 };
1101
1102 &saradc {
1103 vref-supply = <&vcc_1v8>;
1104 status = "okay";
1105 };
1106
1107 &sdhci {
1108 bus-width = <8>;
1109 max-frequency = <200000000>;
1110 no-sd;
1111 no-sdio;
1112 non-removable;
1113 pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
1114 pinctrl-names = "default";
1115 status = "okay";
1116 };
1117
1118 &sdmmc0 {
1119 bus-width = <4>;
1120 cap-sd-highspeed;
1121 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
1122 disable-wp;
1123 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
1124 pinctrl-names = "default";
1125 sd-uhs-sdr104;
1126 vmmc-supply = <&vcc3v3_sd>;
1127 vqmmc-supply = <&vccio_sd>;
1128 status = "okay";
1129 };
1130
1131 &sdmmc2 {
1132 #address-cells = <1>;
1133 bus-width = <4>;
1134 cap-sd-highspeed;
1135 cap-sdio-irq;
1136 keep-power-in-suspend;
1137 max-frequency = <100000000>;
1138 mmc-pwrseq = <&sdio_pwrseq>;
1139 non-removable;
1140 pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_clk &sdmmc2m0_cmd>;
1141 pinctrl-names = "default";
1142 sd-uhs-sdr104;
1143 #size-cells = <0>;
1144 vmmc-supply = <&vcc_wifi>;
1145 status = "okay";
1146
1147 sdio_wifi: wifi@1 {
1148 reg = <1>;
1149 interrupt-parent = <&gpio4>;
1150 interrupts = <RK_PA1 IRQ_TYPE_LEVEL_LOW>;
1151 interrupt-names = "host-wake";
1152 pinctrl-0 = <&wifi_host_wake_irq>;
1153 pinctrl-names = "default";
1154 };
1155 };
1156
1157 &tsadc {
1158 rockchip,hw-tshut-mode = <0>;
1159 rockchip,hw-tshut-polarity = <0>;
1160 status = "okay";
1161 };
1162
1163 &uart1 {
1164 pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
1165 pinctrl-names = "default";
1166 uart-has-rtscts;
1167 status = "okay";
1168
1169 bluetooth {
1170 compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
1171 device-wake-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
1172 enable-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
1173 host-wake-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
1174 };
1175 };
1176
1177 /* No DMA for a debug serial console. */
1178 &uart2 {
1179 /delete-property/ dmas;
1180 status = "okay";
1181 };
1182
1183 &usb_host0_xhci {
1184 dr_mode = "peripheral";
1185 phy-names = "usb2-phy";
1186 phys = <&usb2phy0_otg>;
1187 maximum-speed = "high-speed";
1188 status = "okay";
1189 };
1190
1191 &usb_host0_ehci {
1192 status = "okay";
1193 };
1194
1195 &usb_host0_ohci {
1196 status = "okay";
1197 };
1198
1199 &usb2phy0 {
1200 status = "okay";
1201 };
1202
1203 &usb2phy0_otg {
1204 status = "okay";
1205 };
1206
1207 &usb2phy1 {
1208 status = "okay";
1209 };
1210
1211 &usb2phy1_otg {
1212 status = "okay";
1213 };
1214
1215 &vop {
1216 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
1217 assigned-clock-parents = <&cru PLL_VPLL>, <&cru PLL_VPLL>;
1218 status = "okay";
1219 };
1220
1221 &vop_mmu {
1222 status = "okay";
1223 };
1224
1225 &vp0 {
1226 vp0_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
1227 reg = <ROCKCHIP_VOP2_EP_MIPI0>;
1228 remote-endpoint = <&dsi0_in_vp0>;
1229 };
1230 };
1231
1232 &vp1 {
1233 vp1_out_dsi1: endpoint@ROCKCHIP_VOP2_EP_MIPI1 {
1234 reg = <ROCKCHIP_VOP2_EP_MIPI1>;
1235 remote-endpoint = <&dsi1_in_vp1>;
1236 };
1237 };