Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3566-tinker-board-3.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
2 /*
3 * Copyright (C) 2025 Michael Opdenacker <[email protected]>
4 */
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/leds/common.h>
8 #include <dt-bindings/pinctrl/rockchip.h>
9 #include <dt-bindings/soc/rockchip,vop2.h>
10 #include "rk3566.dtsi"
11
12 / {
13 aliases {
14 i2c0 = &i2c0;
15 i2c2 = &i2c2;
16 mmc1 = &sdmmc0;
17 serial2 = &uart2;
18 };
19
20 chosen {
21 stdout-path = "serial2:1500000n8";
22 };
23
24 gpio_leds: gpio-leds {
25 compatible = "gpio-leds";
26
27 act-led {
28 gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
29 linux,default-trigger="mmc1";
30 };
31
32 rsv-led {
33 gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
34 linux,default-trigger="none";
35 };
36 };
37
38 vcc3v3_sys: regulator-3v3-vcc-sys {
39 compatible = "regulator-fixed";
40 regulator-name = "vcc3v3_sys";
41 regulator-always-on;
42 regulator-boot-on;
43 regulator-min-microvolt = <3300000>;
44 regulator-max-microvolt = <3300000>;
45 vin-supply = <&vcc5v0_sys>;
46 };
47
48 vcc5v0_sys: regulator-5v0-vcc-sys {
49 compatible = "regulator-fixed";
50 regulator-name = "vcc5v0_sys";
51 regulator-always-on;
52 regulator-boot-on;
53 regulator-min-microvolt = <5000000>;
54 regulator-max-microvolt = <5000000>;
55 };
56
57 vcc5v0_usb_host: regulator-5v0-vcc-usb-host {
58 compatible = "regulator-fixed";
59 enable-active-high;
60 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
61 pinctrl-names = "default";
62 pinctrl-0 = <&u2_a_vbus_en>;
63 regulator-name = "vcc5v0_usb_host";
64 regulator-min-microvolt = <5000000>;
65 regulator-max-microvolt = <5000000>;
66 vin-supply = <&vcc5v0_sys>;
67 };
68 };
69
70 &cpu0 {
71 cpu-supply = <&vdd_cpu>;
72 };
73
74 &cpu1 {
75 cpu-supply = <&vdd_cpu>;
76 };
77
78 &cpu2 {
79 cpu-supply = <&vdd_cpu>;
80 };
81
82 &cpu3 {
83 cpu-supply = <&vdd_cpu>;
84 };
85
86 &i2c0 {
87 status = "okay";
88
89 rk809: pmic@20 {
90 compatible = "rockchip,rk809";
91 reg = <0x20>;
92 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
93 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
94 #clock-cells = <1>;
95 clocks = <&cru I2S1_MCLKOUT_TX>;
96 clock-names = "mclk";
97 clock-output-names = "rk809-clkout1", "rk809-clkout2";
98 interrupt-parent = <&gpio0>;
99 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
102 #sound-dai-cells = <0>;
103 system-power-controller;
104 wakeup-source;
105
106 vcc1-supply = <&vcc3v3_sys>;
107 vcc2-supply = <&vcc3v3_sys>;
108 vcc3-supply = <&vcc3v3_sys>;
109 vcc4-supply = <&vcc3v3_sys>;
110 vcc5-supply = <&vcc3v3_sys>;
111 vcc6-supply = <&vcc3v3_sys>;
112 vcc7-supply = <&vcc3v3_sys>;
113 vcc8-supply = <&vcc3v3_sys>;
114 vcc9-supply = <&vcc3v3_sys>;
115
116 regulators {
117 vcc_1v8: DCDC_REG5 {
118 regulator-name = "vcc_1v8";
119 regulator-always-on;
120 regulator-boot-on;
121 regulator-min-microvolt = <1800000>;
122 regulator-max-microvolt = <1800000>;
123
124 regulator-state-mem {
125 regulator-off-in-suspend;
126 };
127 };
128
129 vcc_3v3: SWITCH_REG1 {
130 regulator-name = "vcc_3v3";
131 regulator-always-on;
132 regulator-boot-on;
133
134 regulator-state-mem {
135 regulator-off-in-suspend;
136 };
137 };
138
139 vcc3v3_sd: SWITCH_REG2 {
140 regulator-name = "vcc3v3_sd";
141 regulator-always-on;
142 regulator-boot-on;
143
144 regulator-state-mem {
145 regulator-off-in-suspend;
146 };
147 };
148
149 vccio_sd: LDO_REG5 {
150 regulator-name = "vccio_sd";
151 regulator-always-on;
152 regulator-boot-on;
153 regulator-min-microvolt = <1800000>;
154 regulator-max-microvolt = <3300000>;
155
156 regulator-state-mem {
157 regulator-off-in-suspend;
158 };
159 };
160 };
161 };
162
163 vdd_cpu: regulator@40 {
164 compatible = "silergy,syr827";
165 reg = <0x40>;
166 fcs,suspend-voltage-selector = <1>;
167 regulator-name = "vdd_cpu";
168 regulator-always-on;
169 regulator-boot-on;
170 regulator-min-microvolt = <830000>;
171 regulator-max-microvolt = <1200000>;
172 regulator-ramp-delay = <2300>;
173 vin-supply = <&vcc3v3_sys>;
174
175 regulator-state-mem {
176 regulator-off-in-suspend;
177 };
178 };
179 };
180
181 &i2c2 {
182 status = "okay";
183
184 eeprom@50 {
185 compatible = "atmel,24c08";
186 reg = <0x50>;
187 pinctrl-names = "default";
188 pinctrl-0 = <&eeprom_wc_n>;
189 };
190
191 rtc_isl1208: rtc@6f {
192 compatible = "isil,isl1208";
193 reg = <0x6f>;
194 interrupt-names = "irq";
195 interrupts-extended = <&gpio0 RK_PD3 IRQ_TYPE_EDGE_FALLING>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&rtcic_int_l>;
198 };
199 };
200
201 &pinctrl {
202 eeprom {
203 eeprom_wc_n: eeprom-wc-n {
204 rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
205 };
206 };
207
208 pmic {
209 pmic_int_l: pmic-int-l {
210 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
211 };
212 };
213
214 rtc {
215 rtcic_int_l: rtcic-int-l {
216 rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
217 };
218 };
219
220 usb {
221 u2_a_vbus_en: u2-a-vbus-en {
222 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
223 };
224
225 u3_a_vbus_en: u3-a-vbus-en {
226 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
227 };
228 };
229 };
230
231 &sdmmc0 {
232 bus-width = <4>;
233 cap-sd-highspeed;
234 disable-wp;
235 pinctrl-names = "default";
236 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
237 vmmc-supply = <&vcc3v3_sd>;
238 vqmmc-supply = <&vccio_sd>;
239 status = "okay";
240 };
241
242 &uart2 {
243 status = "okay";
244 };
245
246 &usb_host0_ehci {
247 status = "okay";
248 };
249
250 &usb_host0_ohci {
251 status = "okay";
252 };
253
254 &usb_host1_ehci {
255 status = "okay";
256 };
257
258 &usb_host1_ohci {
259 status = "okay";
260 };
261
262 &usb2phy0 {
263 status = "okay";
264 };
265
266 &usb2phy0_host {
267 phy-supply = <&vcc5v0_usb_host>;
268 status = "okay";
269 };
270
271 &usb2phy1 {
272 status = "okay";
273 };
274
275 &usb2phy1_host {
276 phy-supply = <&vcc5v0_usb_host>;
277 status = "okay";
278 };