| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/gpio/gpio.h> |
| 6 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 7 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 8 |
#include "rk3566.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Pine64 SOQuartz system on module"; |
| 12 |
compatible = "pine64,soquartz", "rockchip,rk3566"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
mmc0 = &sdmmc0; |
| 16 |
mmc1 = &sdhci; |
| 17 |
mmc2 = &sdmmc1; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen: chosen { |
| 21 |
stdout-path = "serial2:1500000n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
gmac1_clkin: external-gmac1-clock { |
| 25 |
compatible = "fixed-clock"; |
| 26 |
clock-frequency = <125000000>; |
| 27 |
clock-output-names = "gmac1_clkin"; |
| 28 |
#clock-cells = <0>; |
| 29 |
}; |
| 30 |
|
| 31 |
hdmi-con { |
| 32 |
compatible = "hdmi-connector"; |
| 33 |
type = "a"; |
| 34 |
|
| 35 |
port { |
| 36 |
hdmi_con_in: endpoint { |
| 37 |
remote-endpoint = <&hdmi_out_con>; |
| 38 |
}; |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
leds { |
| 43 |
compatible = "gpio-leds"; |
| 44 |
|
| 45 |
led_diy: led-diy { |
| 46 |
label = "diy-led"; |
| 47 |
default-state = "on"; |
| 48 |
gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>; |
| 49 |
linux,default-trigger = "heartbeat"; |
| 50 |
pinctrl-names = "default"; |
| 51 |
pinctrl-0 = <&diy_led_enable_h>; |
| 52 |
retain-state-suspended; |
| 53 |
status = "disabled"; |
| 54 |
}; |
| 55 |
|
| 56 |
led_work: led-work { |
| 57 |
label = "work-led"; |
| 58 |
default-state = "off"; |
| 59 |
gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; |
| 60 |
pinctrl-names = "default"; |
| 61 |
pinctrl-0 = <&work_led_enable_h>; |
| 62 |
retain-state-suspended; |
| 63 |
status = "disabled"; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
sdio_pwrseq: sdio-pwrseq { |
| 68 |
status = "okay"; |
| 69 |
compatible = "mmc-pwrseq-simple"; |
| 70 |
clocks = <&rk809 1>; |
| 71 |
clock-names = "ext_clock"; |
| 72 |
pinctrl-names = "default"; |
| 73 |
pinctrl-0 = <&wifi_enable_h>; |
| 74 |
reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; |
| 75 |
}; |
| 76 |
|
| 77 |
vbus: regulator-vbus { |
| 78 |
compatible = "regulator-fixed"; |
| 79 |
regulator-name = "vbus"; |
| 80 |
regulator-always-on; |
| 81 |
regulator-boot-on; |
| 82 |
regulator-min-microvolt = <5000000>; |
| 83 |
regulator-max-microvolt = <5000000>; |
| 84 |
}; |
| 85 |
|
| 86 |
/* sourced from vbus, vbus is provided by the carrier board */ |
| 87 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 88 |
compatible = "regulator-fixed"; |
| 89 |
regulator-name = "vcc5v0_sys"; |
| 90 |
regulator-always-on; |
| 91 |
regulator-boot-on; |
| 92 |
regulator-min-microvolt = <5000000>; |
| 93 |
regulator-max-microvolt = <5000000>; |
| 94 |
vin-supply = <&vbus>; |
| 95 |
}; |
| 96 |
|
| 97 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 98 |
compatible = "regulator-fixed"; |
| 99 |
regulator-name = "vcc3v3_sys"; |
| 100 |
regulator-always-on; |
| 101 |
regulator-boot-on; |
| 102 |
regulator-min-microvolt = <3300000>; |
| 103 |
regulator-max-microvolt = <3300000>; |
| 104 |
vin-supply = <&vcc5v0_sys>; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
&cpu0 { |
| 109 |
cpu-supply = <&vdd_cpu>; |
| 110 |
}; |
| 111 |
|
| 112 |
&cpu1 { |
| 113 |
cpu-supply = <&vdd_cpu>; |
| 114 |
}; |
| 115 |
|
| 116 |
&cpu2 { |
| 117 |
cpu-supply = <&vdd_cpu>; |
| 118 |
}; |
| 119 |
|
| 120 |
&cpu3 { |
| 121 |
cpu-supply = <&vdd_cpu>; |
| 122 |
}; |
| 123 |
|
| 124 |
&gmac1 { |
| 125 |
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; |
| 126 |
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; |
| 127 |
clock_in_out = "input"; |
| 128 |
phy-supply = <&vcc_3v3>; |
| 129 |
phy-mode = "rgmii"; |
| 130 |
pinctrl-names = "default"; |
| 131 |
pinctrl-0 = <&gmac1m0_miim |
| 132 |
&gmac1m0_tx_bus2 |
| 133 |
&gmac1m0_rx_bus2 |
| 134 |
&gmac1m0_rgmii_clk |
| 135 |
&gmac1m0_clkinout |
| 136 |
&gmac1m0_rgmii_bus>; |
| 137 |
snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; |
| 138 |
snps,reset-active-low; |
| 139 |
/* Reset time is 20ms, 100ms for rtl8211f, also works well here */ |
| 140 |
snps,reset-delays-us = <0 20000 100000>; |
| 141 |
tx_delay = <0x30>; |
| 142 |
rx_delay = <0x10>; |
| 143 |
phy-handle = <&rgmii_phy1>; |
| 144 |
status = "disabled"; |
| 145 |
}; |
| 146 |
|
| 147 |
&gpio0 { |
| 148 |
nextrst-hog { |
| 149 |
gpio-hog; |
| 150 |
/* |
| 151 |
* GPIO_ACTIVE_LOW + output-low here means that the pin is set |
| 152 |
* to high, because output-low decides the value pre-inversion. |
| 153 |
*/ |
| 154 |
gpios = <RK_PA5 GPIO_ACTIVE_LOW>; |
| 155 |
line-name = "nEXTRST"; |
| 156 |
output-low; |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
&gpu { |
| 161 |
mali-supply = <&vdd_gpu>; |
| 162 |
status = "okay"; |
| 163 |
}; |
| 164 |
|
| 165 |
&hdmi { |
| 166 |
avdd-0v9-supply = <&vdda0v9_image>; |
| 167 |
avdd-1v8-supply = <&vcca1v8_image>; |
| 168 |
status = "okay"; |
| 169 |
}; |
| 170 |
|
| 171 |
&hdmi_in { |
| 172 |
hdmi_in_vp0: endpoint { |
| 173 |
remote-endpoint = <&vp0_out_hdmi>; |
| 174 |
}; |
| 175 |
}; |
| 176 |
|
| 177 |
&hdmi_out { |
| 178 |
hdmi_out_con: endpoint { |
| 179 |
remote-endpoint = <&hdmi_con_in>; |
| 180 |
}; |
| 181 |
}; |
| 182 |
|
| 183 |
&hdmi_sound { |
| 184 |
status = "okay"; |
| 185 |
}; |
| 186 |
|
| 187 |
&i2c0 { |
| 188 |
status = "okay"; |
| 189 |
|
| 190 |
vdd_cpu: regulator@1c { |
| 191 |
compatible = "tcs,tcs4525"; |
| 192 |
reg = <0x1c>; |
| 193 |
fcs,suspend-voltage-selector = <1>; |
| 194 |
regulator-name = "vdd_cpu"; |
| 195 |
regulator-min-microvolt = <800000>; |
| 196 |
regulator-max-microvolt = <1150000>; |
| 197 |
regulator-ramp-delay = <2300>; |
| 198 |
regulator-always-on; |
| 199 |
regulator-boot-on; |
| 200 |
vin-supply = <&vcc5v0_sys>; |
| 201 |
|
| 202 |
regulator-state-mem { |
| 203 |
regulator-off-in-suspend; |
| 204 |
}; |
| 205 |
}; |
| 206 |
|
| 207 |
rk809: pmic@20 { |
| 208 |
compatible = "rockchip,rk809"; |
| 209 |
reg = <0x20>; |
| 210 |
interrupt-parent = <&gpio0>; |
| 211 |
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; |
| 212 |
#clock-cells = <1>; |
| 213 |
clock-output-names = "rk808-clkout1", "rk808-clkout2"; |
| 214 |
pinctrl-names = "default"; |
| 215 |
pinctrl-0 = <&pmic_int_l>; |
| 216 |
system-power-controller; |
| 217 |
wakeup-source; |
| 218 |
|
| 219 |
vcc1-supply = <&vcc3v3_sys>; |
| 220 |
vcc2-supply = <&vcc3v3_sys>; |
| 221 |
vcc3-supply = <&vcc3v3_sys>; |
| 222 |
vcc4-supply = <&vcc3v3_sys>; |
| 223 |
vcc5-supply = <&vcc3v3_sys>; |
| 224 |
vcc6-supply = <&vcc3v3_sys>; |
| 225 |
vcc7-supply = <&vcc3v3_sys>; |
| 226 |
vcc8-supply = <&vcc3v3_sys>; |
| 227 |
vcc9-supply = <&vcc3v3_sys>; |
| 228 |
|
| 229 |
regulators { |
| 230 |
vdd_logic: DCDC_REG1 { |
| 231 |
regulator-name = "vdd_logic"; |
| 232 |
regulator-always-on; |
| 233 |
regulator-boot-on; |
| 234 |
regulator-min-microvolt = <500000>; |
| 235 |
regulator-max-microvolt = <1350000>; |
| 236 |
regulator-ramp-delay = <6001>; |
| 237 |
regulator-initial-mode = <0x2>; |
| 238 |
regulator-state-mem { |
| 239 |
regulator-on-in-suspend; |
| 240 |
regulator-suspend-microvolt = <900000>; |
| 241 |
}; |
| 242 |
}; |
| 243 |
|
| 244 |
vdd_gpu: DCDC_REG2 { |
| 245 |
regulator-name = "vdd_gpu"; |
| 246 |
regulator-always-on; |
| 247 |
regulator-boot-on; |
| 248 |
regulator-min-microvolt = <500000>; |
| 249 |
regulator-max-microvolt = <1350000>; |
| 250 |
regulator-ramp-delay = <6001>; |
| 251 |
regulator-initial-mode = <0x2>; |
| 252 |
regulator-state-mem { |
| 253 |
regulator-off-in-suspend; |
| 254 |
}; |
| 255 |
}; |
| 256 |
|
| 257 |
vcc_ddr: DCDC_REG3 { |
| 258 |
regulator-always-on; |
| 259 |
regulator-boot-on; |
| 260 |
regulator-initial-mode = <0x2>; |
| 261 |
regulator-name = "vcc_ddr"; |
| 262 |
regulator-state-mem { |
| 263 |
regulator-on-in-suspend; |
| 264 |
}; |
| 265 |
}; |
| 266 |
|
| 267 |
vdd_npu: DCDC_REG4 { |
| 268 |
regulator-always-on; |
| 269 |
regulator-boot-on; |
| 270 |
regulator-min-microvolt = <500000>; |
| 271 |
regulator-max-microvolt = <1350000>; |
| 272 |
regulator-initial-mode = <0x2>; |
| 273 |
regulator-name = "vdd_npu"; |
| 274 |
regulator-state-mem { |
| 275 |
regulator-off-in-suspend; |
| 276 |
}; |
| 277 |
}; |
| 278 |
|
| 279 |
vcc_1v8: DCDC_REG5 { |
| 280 |
regulator-name = "vcc_1v8"; |
| 281 |
regulator-always-on; |
| 282 |
regulator-boot-on; |
| 283 |
regulator-min-microvolt = <1800000>; |
| 284 |
regulator-max-microvolt = <1800000>; |
| 285 |
regulator-state-mem { |
| 286 |
regulator-on-in-suspend; |
| 287 |
regulator-suspend-microvolt = <1800000>; |
| 288 |
}; |
| 289 |
}; |
| 290 |
|
| 291 |
vdda0v9_image: LDO_REG1 { |
| 292 |
regulator-always-on; |
| 293 |
regulator-boot-on; |
| 294 |
regulator-min-microvolt = <900000>; |
| 295 |
regulator-max-microvolt = <900000>; |
| 296 |
regulator-name = "vdda0v9_image"; |
| 297 |
regulator-state-mem { |
| 298 |
regulator-on-in-suspend; |
| 299 |
regulator-suspend-microvolt = <900000>; |
| 300 |
}; |
| 301 |
}; |
| 302 |
|
| 303 |
vdda_0v9: LDO_REG2 { |
| 304 |
regulator-always-on; |
| 305 |
regulator-boot-on; |
| 306 |
regulator-min-microvolt = <900000>; |
| 307 |
regulator-max-microvolt = <900000>; |
| 308 |
regulator-name = "vdda_0v9"; |
| 309 |
regulator-state-mem { |
| 310 |
regulator-off-in-suspend; |
| 311 |
}; |
| 312 |
}; |
| 313 |
|
| 314 |
vdda0v9_pmu: LDO_REG3 { |
| 315 |
regulator-always-on; |
| 316 |
regulator-boot-on; |
| 317 |
regulator-min-microvolt = <900000>; |
| 318 |
regulator-max-microvolt = <900000>; |
| 319 |
regulator-name = "vdda0v9_pmu"; |
| 320 |
regulator-state-mem { |
| 321 |
regulator-on-in-suspend; |
| 322 |
regulator-suspend-microvolt = <900000>; |
| 323 |
}; |
| 324 |
}; |
| 325 |
|
| 326 |
vccio_acodec: LDO_REG4 { |
| 327 |
regulator-always-on; |
| 328 |
regulator-boot-on; |
| 329 |
regulator-min-microvolt = <3300000>; |
| 330 |
regulator-max-microvolt = <3300000>; |
| 331 |
regulator-name = "vccio_acodec"; |
| 332 |
regulator-state-mem { |
| 333 |
regulator-off-in-suspend; |
| 334 |
}; |
| 335 |
}; |
| 336 |
|
| 337 |
vccio_sd: LDO_REG5 { |
| 338 |
regulator-always-on; |
| 339 |
regulator-boot-on; |
| 340 |
regulator-min-microvolt = <1800000>; |
| 341 |
regulator-max-microvolt = <3300000>; |
| 342 |
regulator-name = "vccio_sd"; |
| 343 |
regulator-state-mem { |
| 344 |
regulator-off-in-suspend; |
| 345 |
}; |
| 346 |
}; |
| 347 |
|
| 348 |
vcc3v3_pmu: LDO_REG6 { |
| 349 |
regulator-always-on; |
| 350 |
regulator-boot-on; |
| 351 |
regulator-min-microvolt = <3300000>; |
| 352 |
regulator-max-microvolt = <3300000>; |
| 353 |
regulator-name = "vcc3v3_pmu"; |
| 354 |
regulator-state-mem { |
| 355 |
regulator-on-in-suspend; |
| 356 |
regulator-suspend-microvolt = <3300000>; |
| 357 |
}; |
| 358 |
}; |
| 359 |
|
| 360 |
vcca_1v8: LDO_REG7 { |
| 361 |
regulator-always-on; |
| 362 |
regulator-boot-on; |
| 363 |
regulator-min-microvolt = <1800000>; |
| 364 |
regulator-max-microvolt = <1800000>; |
| 365 |
regulator-name = "vcca_1v8"; |
| 366 |
regulator-state-mem { |
| 367 |
regulator-off-in-suspend; |
| 368 |
}; |
| 369 |
}; |
| 370 |
|
| 371 |
vcca1v8_pmu: LDO_REG8 { |
| 372 |
regulator-always-on; |
| 373 |
regulator-boot-on; |
| 374 |
regulator-min-microvolt = <1800000>; |
| 375 |
regulator-max-microvolt = <1800000>; |
| 376 |
regulator-name = "vcca1v8_pmu"; |
| 377 |
regulator-state-mem { |
| 378 |
regulator-off-in-suspend; |
| 379 |
}; |
| 380 |
}; |
| 381 |
|
| 382 |
vcca1v8_image: LDO_REG9 { |
| 383 |
regulator-always-on; |
| 384 |
regulator-boot-on; |
| 385 |
regulator-min-microvolt = <1800000>; |
| 386 |
regulator-max-microvolt = <1800000>; |
| 387 |
regulator-name = "vcca1v8_image"; |
| 388 |
regulator-state-mem { |
| 389 |
regulator-off-in-suspend; |
| 390 |
}; |
| 391 |
}; |
| 392 |
|
| 393 |
vcc_3v3: SWITCH_REG1 { |
| 394 |
regulator-name = "vcc_3v3"; |
| 395 |
regulator-state-mem { |
| 396 |
regulator-off-in-suspend; |
| 397 |
}; |
| 398 |
}; |
| 399 |
|
| 400 |
vcc3v3_sd: SWITCH_REG2 { |
| 401 |
regulator-name = "vcc3v3_sd"; |
| 402 |
status = "disabled"; |
| 403 |
regulator-state-mem { |
| 404 |
regulator-on-in-suspend; |
| 405 |
}; |
| 406 |
}; |
| 407 |
|
| 408 |
}; |
| 409 |
}; |
| 410 |
}; |
| 411 |
|
| 412 |
/* |
| 413 |
* i2c1 is exposed on CM1 / Module1A |
| 414 |
* pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu |
| 415 |
* pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu |
| 416 |
*/ |
| 417 |
&i2c1 { |
| 418 |
status = "disabled"; |
| 419 |
}; |
| 420 |
|
| 421 |
/* |
| 422 |
* i2c2 is exposed on CM1 / Module1A |
| 423 |
* pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch |
| 424 |
* pin 58 - i2c2_sda_m1, pullup to vcc_3v3 |
| 425 |
*/ |
| 426 |
&i2c2 { |
| 427 |
pinctrl-names = "default"; |
| 428 |
pinctrl-0 = <&i2c2m1_xfer>; |
| 429 |
status = "disabled"; |
| 430 |
}; |
| 431 |
|
| 432 |
/* |
| 433 |
* i2c3 is exposed on CM1 / Module1A |
| 434 |
* pin 35 - i2c3_scl_m0, pullup to vcc_3v3 |
| 435 |
* pin 36 - i2c3_sda_m0, pullup to vcc_3v3 |
| 436 |
*/ |
| 437 |
&i2c3 { |
| 438 |
status = "disabled"; |
| 439 |
}; |
| 440 |
|
| 441 |
/* |
| 442 |
* i2c4 is exposed on CM2 / Module1B |
| 443 |
* pin 45 - i2c4_scl_m1 |
| 444 |
* pin 47 - i2c4_sda_m1 |
| 445 |
*/ |
| 446 |
&i2c4 { |
| 447 |
pinctrl-names = "default"; |
| 448 |
pinctrl-0 = <&i2c4m1_xfer>; |
| 449 |
status = "disabled"; |
| 450 |
}; |
| 451 |
|
| 452 |
&i2s0_8ch { |
| 453 |
status = "okay"; |
| 454 |
}; |
| 455 |
|
| 456 |
/* |
| 457 |
* i2s1_8ch is exposed on CM1 / Module1A |
| 458 |
* pin 24 - i2s1_sdi1_m1 |
| 459 |
* pin 25 - i2s1_sdo0_m1 |
| 460 |
* pin 26 - i2s1_lrck_tx_m1 |
| 461 |
* pin 27 - i2s1_sdi0_m1 |
| 462 |
* pin 29 - i2s1_sdi3_m1 |
| 463 |
* pin 30 - i2s1_sdi2_m1 |
| 464 |
* pin 40 - i2s1_sdo1_m1, shared with spi3 |
| 465 |
* pin 41 - i2s1_sdo2_m1 |
| 466 |
* pin 49 - i2s1_sclk_tx_m1 |
| 467 |
* pin 50 - i2s1_mclk_m1 |
| 468 |
* pin 56 - i2s1_sdo3_m1, shared with i2c2 |
| 469 |
*/ |
| 470 |
&i2s1_8ch { |
| 471 |
pinctrl-names = "default"; |
| 472 |
pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx |
| 473 |
&i2s1m1_lrcktx &i2s1m1_lrckrx |
| 474 |
&i2s1m1_sdi0 &i2s1m1_sdi1 |
| 475 |
&i2s1m1_sdi2 &i2s1m1_sdi3 |
| 476 |
&i2s1m1_sdo0 &i2s1m1_sdo1 |
| 477 |
&i2s1m1_sdo2 &i2s1m1_sdo3>; |
| 478 |
status = "disabled"; |
| 479 |
}; |
| 480 |
|
| 481 |
&mdio1 { |
| 482 |
rgmii_phy1: ethernet-phy@0 { |
| 483 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 484 |
reg = <0>; |
| 485 |
status = "disabled"; |
| 486 |
}; |
| 487 |
}; |
| 488 |
|
| 489 |
&pcie2x1 { |
| 490 |
pinctrl-names = "default"; |
| 491 |
pinctrl-0 = <&pcie_reset_h>; |
| 492 |
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; |
| 493 |
}; |
| 494 |
|
| 495 |
&pinctrl { |
| 496 |
bt { |
| 497 |
bt_enable_h: bt-enable-h { |
| 498 |
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 499 |
}; |
| 500 |
|
| 501 |
bt_host_wake_l: bt-host-wake-l { |
| 502 |
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; |
| 503 |
}; |
| 504 |
|
| 505 |
bt_wake_l: bt-wake-l { |
| 506 |
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 507 |
}; |
| 508 |
}; |
| 509 |
|
| 510 |
leds { |
| 511 |
work_led_enable_h: work-led-enable-h { |
| 512 |
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 513 |
}; |
| 514 |
|
| 515 |
diy_led_enable_h: diy-led-enable-h { |
| 516 |
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 517 |
}; |
| 518 |
}; |
| 519 |
|
| 520 |
pcie { |
| 521 |
pcie_clkreq_h: pcie-clkreq-h { |
| 522 |
rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 523 |
}; |
| 524 |
pcie_reset_h: pcie-reset-h { |
| 525 |
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 526 |
}; |
| 527 |
}; |
| 528 |
|
| 529 |
pmic { |
| 530 |
pmic_int_l: pmic-int-l { |
| 531 |
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 532 |
}; |
| 533 |
}; |
| 534 |
|
| 535 |
sdio-pwrseq { |
| 536 |
wifi_enable_h: wifi-enable-h { |
| 537 |
rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 538 |
}; |
| 539 |
}; |
| 540 |
}; |
| 541 |
|
| 542 |
&pmu_io_domains { |
| 543 |
pmuio1-supply = <&vcc3v3_pmu>; |
| 544 |
pmuio2-supply = <&vcc3v3_pmu>; |
| 545 |
vccio1-supply = <&vcc_3v3>; |
| 546 |
vccio2-supply = <&vcc_1v8>; |
| 547 |
vccio3-supply = <&vccio_sd>; |
| 548 |
vccio4-supply = <&vcc_1v8>; |
| 549 |
vccio5-supply = <&vcc_3v3>; |
| 550 |
vccio6-supply = <&vcc_3v3>; |
| 551 |
vccio7-supply = <&vcc_3v3>; |
| 552 |
status = "okay"; |
| 553 |
}; |
| 554 |
|
| 555 |
/* |
| 556 |
* saradc is exposed on CM1 / Module1A |
| 557 |
* pin 94 - saradc_vin3 |
| 558 |
* pin 96 - saradc_vin2 |
| 559 |
*/ |
| 560 |
&saradc { |
| 561 |
vref-supply = <&vcca_1v8>; |
| 562 |
status = "disabled"; |
| 563 |
}; |
| 564 |
|
| 565 |
&sdhci { |
| 566 |
bus-width = <8>; |
| 567 |
mmc-hs200-1_8v; |
| 568 |
non-removable; |
| 569 |
vmmc-supply = <&vcc_3v3>; |
| 570 |
vqmmc-supply = <&vcc_1v8>; |
| 571 |
status = "okay"; |
| 572 |
}; |
| 573 |
|
| 574 |
&sdmmc0 { |
| 575 |
broken-cd; |
| 576 |
bus-width = <4>; |
| 577 |
cap-sd-highspeed; |
| 578 |
disable-wp; |
| 579 |
pinctrl-names = "default"; |
| 580 |
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; |
| 581 |
vqmmc-supply = <&vccio_sd>; |
| 582 |
status = "disabled"; |
| 583 |
}; |
| 584 |
|
| 585 |
&sdmmc1 { |
| 586 |
bus-width = <4>; |
| 587 |
cap-sd-highspeed; |
| 588 |
cap-sdio-irq; |
| 589 |
keep-power-in-suspend; |
| 590 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 591 |
non-removable; |
| 592 |
pinctrl-names = "default"; |
| 593 |
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; |
| 594 |
sd-uhs-sdr50; |
| 595 |
vmmc-supply = <&vcc3v3_sys>; |
| 596 |
vqmmc-supply = <&vcc_1v8>; |
| 597 |
status = "okay"; |
| 598 |
}; |
| 599 |
|
| 600 |
/* |
| 601 |
* spi3 is exposed on CM1 / Module1A |
| 602 |
* pin 37 - spi3_cs1_m0 |
| 603 |
* pin 38 - spi3_clk_m0 |
| 604 |
* pin 39 - spi3_cs0_m0 |
| 605 |
* pin 40 - spi3_miso_m0, shared with i2s1_8ch |
| 606 |
* pin 44 - spi3_mosi_m0 |
| 607 |
*/ |
| 608 |
&spi3 { |
| 609 |
status = "disabled"; |
| 610 |
}; |
| 611 |
|
| 612 |
&tsadc { |
| 613 |
status = "okay"; |
| 614 |
}; |
| 615 |
|
| 616 |
&uart1 { |
| 617 |
dma-names = "tx", "rx"; |
| 618 |
pinctrl-names = "default"; |
| 619 |
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; |
| 620 |
uart-has-rtscts; |
| 621 |
status = "okay"; |
| 622 |
|
| 623 |
bluetooth { |
| 624 |
compatible = "brcm,bcm43438-bt"; |
| 625 |
clocks = <&rk809 1>; |
| 626 |
clock-names = "lpo"; |
| 627 |
device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; |
| 628 |
host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; |
| 629 |
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 630 |
pinctrl-names = "default"; |
| 631 |
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; |
| 632 |
vbat-supply = <&vcc3v3_sys>; |
| 633 |
vddio-supply = <&vcca1v8_pmu>; |
| 634 |
}; |
| 635 |
}; |
| 636 |
|
| 637 |
/* |
| 638 |
* uart2 is exposed on CM1 / Module1A |
| 639 |
* pin 51 - uart2_rx_m0 |
| 640 |
* pin 55 - uart2_tx_m0 |
| 641 |
*/ |
| 642 |
&uart2 { |
| 643 |
status = "disabled"; |
| 644 |
}; |
| 645 |
|
| 646 |
/* |
| 647 |
* uart7 is exposed on CM1 / Module1A |
| 648 |
* pin 46 - uart7_tx_m2 |
| 649 |
* pin 47 - uart7_rx_m2 |
| 650 |
*/ |
| 651 |
&uart7 { |
| 652 |
pinctrl-names = "default"; |
| 653 |
pinctrl-0 = <&uart7m2_xfer>; |
| 654 |
status = "disabled"; |
| 655 |
}; |
| 656 |
|
| 657 |
/* dwc3_otg is the only usb port available */ |
| 658 |
&usb2phy0 { |
| 659 |
status = "disabled"; |
| 660 |
}; |
| 661 |
|
| 662 |
&usb2phy0_otg { |
| 663 |
status = "disabled"; |
| 664 |
}; |
| 665 |
|
| 666 |
&usb_host0_xhci { |
| 667 |
status = "disabled"; |
| 668 |
}; |
| 669 |
|
| 670 |
&vop { |
| 671 |
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| 672 |
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 673 |
status = "okay"; |
| 674 |
}; |
| 675 |
|
| 676 |
&vop_mmu { |
| 677 |
status = "okay"; |
| 678 |
}; |
| 679 |
|
| 680 |
&vp0 { |
| 681 |
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 682 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 683 |
remote-endpoint = <&hdmi_in_vp0>; |
| 684 |
}; |
| 685 |
}; |