| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include "rk3566-soquartz.dtsi" |
| 6 |
|
| 7 |
/ { |
| 8 |
model = "Pine64 SOQuartz on Model A carrier board"; |
| 9 |
compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566"; |
| 10 |
|
| 11 |
aliases { |
| 12 |
ethernet0 = &gmac1; |
| 13 |
}; |
| 14 |
|
| 15 |
/* labeled DCIN_12V in schematic */ |
| 16 |
vcc12v_dcin: regulator-vcc12v-dcin { |
| 17 |
compatible = "regulator-fixed"; |
| 18 |
regulator-name = "vcc12v_dcin"; |
| 19 |
regulator-always-on; |
| 20 |
regulator-boot-on; |
| 21 |
regulator-min-microvolt = <12000000>; |
| 22 |
regulator-max-microvolt = <12000000>; |
| 23 |
}; |
| 24 |
|
| 25 |
vcc5v0_usb: regulator-vcc5v0-usb { |
| 26 |
compatible = "regulator-fixed"; |
| 27 |
regulator-name = "vcc5v0_usb"; |
| 28 |
regulator-always-on; |
| 29 |
regulator-boot-on; |
| 30 |
regulator-min-microvolt = <5000000>; |
| 31 |
regulator-max-microvolt = <5000000>; |
| 32 |
vin-supply = <&vcc12v_dcin>; |
| 33 |
}; |
| 34 |
|
| 35 |
/* |
| 36 |
* Labelled VCC3V0_SD in schematic to not conflict with PMIC |
| 37 |
* regulator, it's 3.3v in actuality |
| 38 |
*/ |
| 39 |
vcc3v0_sd: regulator-vcc3v0-sd { |
| 40 |
compatible = "regulator-fixed"; |
| 41 |
regulator-name = "vcc3v0_sd"; |
| 42 |
regulator-always-on; |
| 43 |
regulator-boot-on; |
| 44 |
regulator-min-microvolt = <3300000>; |
| 45 |
regulator-max-microvolt = <3300000>; |
| 46 |
vin-supply = <&vcc3v3_sys>; |
| 47 |
}; |
| 48 |
|
| 49 |
vcc3v3_pcie: regulator-vcc3v3-pcie { |
| 50 |
compatible = "regulator-fixed"; |
| 51 |
regulator-name = "vcc3v3_pcie"; |
| 52 |
regulator-always-on; |
| 53 |
regulator-boot-on; |
| 54 |
regulator-min-microvolt = <3300000>; |
| 55 |
regulator-max-microvolt = <3300000>; |
| 56 |
vin-supply = <&vcc12v_dcin>; |
| 57 |
}; |
| 58 |
|
| 59 |
vcc12v_pcie: regulator-vcc12v-pcie { |
| 60 |
compatible = "regulator-fixed"; |
| 61 |
regulator-name = "vcc12v_pcie"; |
| 62 |
regulator-always-on; |
| 63 |
regulator-boot-on; |
| 64 |
regulator-min-microvolt = <12000000>; |
| 65 |
regulator-max-microvolt = <12000000>; |
| 66 |
vin-supply = <&vcc12v_dcin>; |
| 67 |
}; |
| 68 |
}; |
| 69 |
|
| 70 |
/* phy for pcie */ |
| 71 |
&combphy2 { |
| 72 |
phy-supply = <&vcc3v3_sys>; |
| 73 |
status = "okay"; |
| 74 |
}; |
| 75 |
|
| 76 |
&gmac1 { |
| 77 |
status = "okay"; |
| 78 |
}; |
| 79 |
|
| 80 |
/* |
| 81 |
* i2c1 is exposed on CM1 / Module1A |
| 82 |
* pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu |
| 83 |
* pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu |
| 84 |
*/ |
| 85 |
&i2c1 { |
| 86 |
status = "okay"; |
| 87 |
|
| 88 |
/* |
| 89 |
* the rtc interrupt is tied to PMIC_PWRON, |
| 90 |
* it will force reset the board if triggered. |
| 91 |
*/ |
| 92 |
pcf85063: rtc@51 { |
| 93 |
compatible = "nxp,pcf85063"; |
| 94 |
reg = <0x51>; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
/* |
| 99 |
* i2c2 is exposed on CM1 / Module1A - to PI40 |
| 100 |
* pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch |
| 101 |
* pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 |
| 102 |
*/ |
| 103 |
&i2c2 { |
| 104 |
status = "disabled"; |
| 105 |
}; |
| 106 |
|
| 107 |
/* |
| 108 |
* i2c3 is exposed on CM1 / Module1A - to PI40 |
| 109 |
* pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 |
| 110 |
* pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 |
| 111 |
*/ |
| 112 |
&i2c3 { |
| 113 |
status = "disabled"; |
| 114 |
}; |
| 115 |
|
| 116 |
/* |
| 117 |
* i2c4 is exposed on CM2 / Module1B - to PI40 |
| 118 |
* pin 45 - GPIO24 - i2c4_scl_m1 |
| 119 |
* pin 47 - GPIO23 - i2c4_sda_m1 |
| 120 |
*/ |
| 121 |
&i2c4 { |
| 122 |
status = "disabled"; |
| 123 |
}; |
| 124 |
|
| 125 |
/* |
| 126 |
* i2s1_8ch is exposed on CM1 / Module1A - to PI40 |
| 127 |
* pin 24 - GPIO26 - i2s1_sdi1_m1 |
| 128 |
* pin 25 - GPIO21 - i2s1_sdo0_m1 |
| 129 |
* pin 26 - GPIO19 - i2s1_lrck_tx_m1 |
| 130 |
* pin 27 - GPIO20 - i2s1_sdi0_m1 |
| 131 |
* pin 29 - GPIO16 - i2s1_sdi3_m1 |
| 132 |
* pin 30 - GPIO6 - i2s1_sdi2_m1 |
| 133 |
* pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 |
| 134 |
* pin 41 - GPIO25 - i2s1_sdo2_m1 |
| 135 |
* pin 49 - GPIO18 - i2s1_sclk_tx_m1 |
| 136 |
* pin 50 - GPIO17 - i2s1_mclk_m1 |
| 137 |
* pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 |
| 138 |
*/ |
| 139 |
&i2s1_8ch { |
| 140 |
status = "disabled"; |
| 141 |
}; |
| 142 |
|
| 143 |
&led_diy { |
| 144 |
status = "okay"; |
| 145 |
}; |
| 146 |
|
| 147 |
&led_work { |
| 148 |
status = "okay"; |
| 149 |
}; |
| 150 |
|
| 151 |
&pcie2x1 { |
| 152 |
vpcie3v3-supply = <&vcc3v3_pcie>; |
| 153 |
status = "okay"; |
| 154 |
}; |
| 155 |
|
| 156 |
&rgmii_phy1 { |
| 157 |
status = "okay"; |
| 158 |
}; |
| 159 |
|
| 160 |
&rgmii_phy1 { |
| 161 |
status = "okay"; |
| 162 |
}; |
| 163 |
|
| 164 |
/* |
| 165 |
* saradc is exposed on CM1 / Module1A - to J2 |
| 166 |
* pin 94 - AIN1 - saradc_vin3 |
| 167 |
* pin 96 - AIN0 - saradc_vin2 |
| 168 |
*/ |
| 169 |
&saradc { |
| 170 |
status = "disabled"; |
| 171 |
}; |
| 172 |
|
| 173 |
/* |
| 174 |
* vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+ |
| 175 |
* the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys, |
| 176 |
* so we use vcc3v3_sd here to ensure the regulator is enabled on older boards. |
| 177 |
*/ |
| 178 |
&sdmmc0 { |
| 179 |
vmmc-supply = <&vcc3v3_sd>; |
| 180 |
status = "okay"; |
| 181 |
}; |
| 182 |
|
| 183 |
/* |
| 184 |
* spi3 is exposed on CM1 / Module1A - to PI40 |
| 185 |
* pin 37 - GPIO7 - spi3_cs1_m0 |
| 186 |
* pin 38 - GPIO11 - spi3_clk_m0 |
| 187 |
* pin 39 - GPIO8 - spi3_cs0_m0 |
| 188 |
* pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch |
| 189 |
* pin 44 - GPIO10 - spi3_mosi_m0 |
| 190 |
*/ |
| 191 |
&spi3 { |
| 192 |
status = "disabled"; |
| 193 |
}; |
| 194 |
|
| 195 |
/* |
| 196 |
* uart2 is exposed on CM1 / Module1A - to PI40 |
| 197 |
* pin 51 - GPIO15 - uart2_rx_m0 |
| 198 |
* pin 55 - GPIO14 - uart2_tx_m0 |
| 199 |
*/ |
| 200 |
&uart2 { |
| 201 |
status = "okay"; |
| 202 |
}; |
| 203 |
|
| 204 |
/* |
| 205 |
* uart7 is exposed on CM1 / Module1A - to PI40 |
| 206 |
* pin 46 - GPIO22 - uart7_tx_m2 |
| 207 |
* pin 47 - GPIO23 - uart7_rx_m2 |
| 208 |
*/ |
| 209 |
&uart7 { |
| 210 |
status = "okay"; |
| 211 |
}; |
| 212 |
|
| 213 |
&usb2phy0 { |
| 214 |
status = "okay"; |
| 215 |
}; |
| 216 |
|
| 217 |
&usb2phy0_otg { |
| 218 |
phy-supply = <&vcc5v0_usb>; |
| 219 |
status = "okay"; |
| 220 |
}; |
| 221 |
|
| 222 |
&usb_host0_xhci { |
| 223 |
status = "okay"; |
| 224 |
}; |
| 225 |
|
| 226 |
&vbus { |
| 227 |
vin-supply = <&vcc5v0_usb>; |
| 228 |
}; |
| 229 |
|
| 230 |
&vcc3v3_sd { |
| 231 |
regulator-always-on; |
| 232 |
regulator-boot-on; |
| 233 |
regulator-min-microvolt = <3300000>; |
| 234 |
regulator-max-microvolt = <3300000>; |
| 235 |
status = "okay"; |
| 236 |
}; |