| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2022 Radxa Limited |
| 4 |
* Copyright (c) 2022 Amarula Solutions(India) |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 9 |
#include "rk3566.dtsi" |
| 10 |
#include "rk3566-radxa-cm3.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "Radxa Compute Module 3(CM3) IO Board"; |
| 14 |
compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566"; |
| 15 |
|
| 16 |
aliases { |
| 17 |
ethernet0 = &gmac1; |
| 18 |
mmc1 = &sdmmc0; |
| 19 |
}; |
| 20 |
|
| 21 |
chosen: chosen { |
| 22 |
stdout-path = "serial2:1500000n8"; |
| 23 |
}; |
| 24 |
|
| 25 |
gmac1_clkin: external-gmac1-clock { |
| 26 |
compatible = "fixed-clock"; |
| 27 |
clock-frequency = <125000000>; |
| 28 |
clock-output-names = "gmac1_clkin"; |
| 29 |
#clock-cells = <0>; |
| 30 |
}; |
| 31 |
|
| 32 |
hdmi-con { |
| 33 |
compatible = "hdmi-connector"; |
| 34 |
type = "a"; |
| 35 |
|
| 36 |
port { |
| 37 |
hdmi_con_in: endpoint { |
| 38 |
remote-endpoint = <&hdmi_out_con>; |
| 39 |
}; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
leds { |
| 44 |
compatible = "gpio-leds"; |
| 45 |
|
| 46 |
led-1 { |
| 47 |
gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>; |
| 48 |
color = <LED_COLOR_ID_GREEN>; |
| 49 |
function = LED_FUNCTION_ACTIVITY; |
| 50 |
linux,default-trigger = "heartbeat"; |
| 51 |
pinctrl-names = "default"; |
| 52 |
pinctrl-0 = <&pi_nled_activity>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
vcc5v0_usb30: regulator-vcc5v0-usb30 { |
| 57 |
compatible = "regulator-fixed"; |
| 58 |
regulator-name = "vcc5v0_usb30"; |
| 59 |
enable-active-high; |
| 60 |
gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; |
| 61 |
pinctrl-names = "default"; |
| 62 |
pinctrl-0 = <&vcc5v0_usb30_en_h>; |
| 63 |
regulator-always-on; |
| 64 |
regulator-min-microvolt = <5000000>; |
| 65 |
regulator-max-microvolt = <5000000>; |
| 66 |
vin-supply = <&vcc_sys>; |
| 67 |
}; |
| 68 |
|
| 69 |
vcca1v8_image: regulator-vcca1v8-image { |
| 70 |
compatible = "regulator-fixed"; |
| 71 |
regulator-name = "vcca1v8_image"; |
| 72 |
regulator-always-on; |
| 73 |
regulator-boot-on; |
| 74 |
regulator-min-microvolt = <1800000>; |
| 75 |
regulator-max-microvolt = <1800000>; |
| 76 |
vin-supply = <&vcc_1v8_p>; |
| 77 |
}; |
| 78 |
|
| 79 |
vdda0v9_image: regulator-vdda0v9-image { |
| 80 |
compatible = "regulator-fixed"; |
| 81 |
regulator-name = "vcca0v9_image"; |
| 82 |
regulator-always-on; |
| 83 |
regulator-boot-on; |
| 84 |
regulator-min-microvolt = <900000>; |
| 85 |
regulator-max-microvolt = <900000>; |
| 86 |
vin-supply = <&vdda_0v9>; |
| 87 |
}; |
| 88 |
}; |
| 89 |
|
| 90 |
&combphy1 { |
| 91 |
status = "okay"; |
| 92 |
}; |
| 93 |
|
| 94 |
&gmac1 { |
| 95 |
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; |
| 96 |
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; |
| 97 |
assigned-clock-rates = <0>, <125000000>; |
| 98 |
clock_in_out = "input"; |
| 99 |
phy-handle = <&rgmii_phy1>; |
| 100 |
phy-mode = "rgmii"; |
| 101 |
pinctrl-names = "default"; |
| 102 |
pinctrl-0 = <&gmac1m0_miim |
| 103 |
&gmac1m0_tx_bus2 |
| 104 |
&gmac1m0_rx_bus2 |
| 105 |
&gmac1m0_rgmii_clk |
| 106 |
&gmac1m0_rgmii_bus |
| 107 |
&gmac1m0_clkinout>; |
| 108 |
snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; |
| 109 |
snps,reset-active-low; |
| 110 |
/* Reset time is 20ms, 100ms for rtl8211f */ |
| 111 |
snps,reset-delays-us = <0 20000 100000>; |
| 112 |
tx_delay = <0x46>; |
| 113 |
rx_delay = <0x2e>; |
| 114 |
status = "okay"; |
| 115 |
}; |
| 116 |
|
| 117 |
&hdmi { |
| 118 |
avdd-0v9-supply = <&vdda0v9_image>; |
| 119 |
avdd-1v8-supply = <&vcca1v8_image>; |
| 120 |
status = "okay"; |
| 121 |
}; |
| 122 |
|
| 123 |
&hdmi_in { |
| 124 |
hdmi_in_vp0: endpoint { |
| 125 |
remote-endpoint = <&vp0_out_hdmi>; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
&hdmi_out { |
| 130 |
hdmi_out_con: endpoint { |
| 131 |
remote-endpoint = <&hdmi_con_in>; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
&hdmi_sound { |
| 136 |
status = "okay"; |
| 137 |
}; |
| 138 |
|
| 139 |
&mdio1 { |
| 140 |
rgmii_phy1: ethernet-phy@0 { |
| 141 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 142 |
reg = <0x0>; |
| 143 |
}; |
| 144 |
}; |
| 145 |
|
| 146 |
&pinctrl { |
| 147 |
gmac1 { |
| 148 |
gmac1m0_miim: gmac1m0-miim { |
| 149 |
rockchip,pins = |
| 150 |
/* gmac1_mdcm0 */ |
| 151 |
<3 RK_PC4 3 &pcfg_pull_none_drv_level_15>, |
| 152 |
/* gmac1_mdiom0 */ |
| 153 |
<3 RK_PC5 3 &pcfg_pull_none_drv_level_15>; |
| 154 |
}; |
| 155 |
|
| 156 |
gmac1m0_rx_bus2: gmac1m0-rx-bus2 { |
| 157 |
rockchip,pins = |
| 158 |
/* gmac1_rxd0m0 */ |
| 159 |
<3 RK_PB1 3 &pcfg_pull_none_drv_level_15>, |
| 160 |
/* gmac1_rxd1m0 */ |
| 161 |
<3 RK_PB2 3 &pcfg_pull_none_drv_level_15>, |
| 162 |
/* gmac1_rxdvcrsm0 */ |
| 163 |
<3 RK_PB3 3 &pcfg_pull_none_drv_level_15>; |
| 164 |
}; |
| 165 |
|
| 166 |
gmac1m0_tx_bus2: gmac1m0-tx-bus2 { |
| 167 |
rockchip,pins = |
| 168 |
/* gmac1_txd0m0 */ |
| 169 |
<3 RK_PB5 3 &pcfg_pull_none_drv_level_15>, |
| 170 |
/* gmac1_txd1m0 */ |
| 171 |
<3 RK_PB6 3 &pcfg_pull_none_drv_level_15>, |
| 172 |
/* gmac1_txenm0 */ |
| 173 |
<3 RK_PB7 3 &pcfg_pull_none_drv_level_15>; |
| 174 |
}; |
| 175 |
|
| 176 |
gmac1m0_rgmii_clk: gmac1m0-rgmii-clk { |
| 177 |
rockchip,pins = |
| 178 |
/* gmac1_rxclkm0 */ |
| 179 |
<3 RK_PA7 3 &pcfg_pull_none_drv_level_15>, |
| 180 |
/* gmac1_txclkm0 */ |
| 181 |
<3 RK_PA6 3 &pcfg_pull_none_drv_level_15>; |
| 182 |
}; |
| 183 |
|
| 184 |
gmac1m0_rgmii_bus: gmac1m0-rgmii-bus { |
| 185 |
rockchip,pins = |
| 186 |
/* gmac1_rxd2m0 */ |
| 187 |
<3 RK_PA4 3 &pcfg_pull_none_drv_level_15>, |
| 188 |
/* gmac1_rxd3m0 */ |
| 189 |
<3 RK_PA5 3 &pcfg_pull_none_drv_level_15>, |
| 190 |
/* gmac1_txd2m0 */ |
| 191 |
<3 RK_PA2 3 &pcfg_pull_none_drv_level_15>, |
| 192 |
/* gmac1_txd3m0 */ |
| 193 |
<3 RK_PA3 3 &pcfg_pull_none_drv_level_15>; |
| 194 |
}; |
| 195 |
|
| 196 |
gmac1m0_clkinout: gmac1m0-clkinout { |
| 197 |
rockchip,pins = |
| 198 |
/* gmac1_mclkinoutm0 */ |
| 199 |
<3 RK_PC0 3 &pcfg_pull_none_drv_level_15>; |
| 200 |
}; |
| 201 |
}; |
| 202 |
|
| 203 |
leds { |
| 204 |
pi_nled_activity: pi-nled-activity { |
| 205 |
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 206 |
}; |
| 207 |
}; |
| 208 |
|
| 209 |
sdcard { |
| 210 |
sdmmc_pwren: sdmmc-pwren { |
| 211 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 212 |
}; |
| 213 |
}; |
| 214 |
|
| 215 |
usb { |
| 216 |
vcc5v0_usb30_en_h: vcc5v0-host-en-h { |
| 217 |
rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 218 |
}; |
| 219 |
}; |
| 220 |
}; |
| 221 |
|
| 222 |
&sdmmc0 { |
| 223 |
bus-width = <4>; |
| 224 |
cap-mmc-highspeed; |
| 225 |
cap-sd-highspeed; |
| 226 |
disable-wp; |
| 227 |
vqmmc-supply = <&vccio_sd>; |
| 228 |
pinctrl-names = "default"; |
| 229 |
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>; |
| 230 |
status = "okay"; |
| 231 |
}; |
| 232 |
|
| 233 |
&uart2 { |
| 234 |
status = "okay"; |
| 235 |
}; |
| 236 |
|
| 237 |
&usb2phy0_host { |
| 238 |
phy-supply = <&vcc5v0_usb30>; |
| 239 |
status = "okay"; |
| 240 |
}; |
| 241 |
|
| 242 |
&usb2phy1_host { |
| 243 |
status = "okay"; |
| 244 |
}; |
| 245 |
|
| 246 |
&usb2phy1_otg { |
| 247 |
status = "okay"; |
| 248 |
}; |
| 249 |
|
| 250 |
&usb_host0_ehci { |
| 251 |
status = "okay"; |
| 252 |
}; |
| 253 |
|
| 254 |
&usb_host1_xhci { |
| 255 |
status = "okay"; |
| 256 |
}; |
| 257 |
|
| 258 |
&usb2phy0_otg { |
| 259 |
status = "okay"; |
| 260 |
}; |
| 261 |
|
| 262 |
&usb_host0_xhci { |
| 263 |
status = "okay"; |
| 264 |
}; |
| 265 |
|
| 266 |
&vop { |
| 267 |
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| 268 |
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 269 |
status = "okay"; |
| 270 |
}; |
| 271 |
|
| 272 |
&vop_mmu { |
| 273 |
status = "okay"; |
| 274 |
}; |
| 275 |
|
| 276 |
&vp0 { |
| 277 |
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 278 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 279 |
remote-endpoint = <&hdmi_in_vp0>; |
| 280 |
}; |
| 281 |
}; |