Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3566-quartz64-b.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3 /dts-v1/;
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/pinctrl/rockchip.h>
7 #include <dt-bindings/soc/rockchip,vop2.h>
8 #include "rk3566.dtsi"
9
10 / {
11 model = "Pine64 Quartz64 Model B";
12 compatible = "pine64,quartz64-b", "rockchip,rk3566";
13
14 aliases {
15 ethernet0 = &gmac1;
16 mmc0 = &sdmmc0;
17 mmc1 = &sdhci;
18 mmc2 = &sdmmc1;
19 };
20
21 chosen: chosen {
22 stdout-path = "serial2:1500000n8";
23 };
24
25 gmac1_clkin: external-gmac1-clock {
26 compatible = "fixed-clock";
27 clock-frequency = <125000000>;
28 clock-output-names = "gmac1_clkin";
29 #clock-cells = <0>;
30 };
31
32 hdmi-con {
33 compatible = "hdmi-connector";
34 type = "a";
35
36 port {
37 hdmi_con_in: endpoint {
38 remote-endpoint = <&hdmi_out_con>;
39 };
40 };
41 };
42
43 leds {
44 compatible = "gpio-leds";
45
46 led-user {
47 label = "user-led";
48 default-state = "on";
49 gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
50 linux,default-trigger = "heartbeat";
51 pinctrl-names = "default";
52 pinctrl-0 = <&user_led_enable_h>;
53 retain-state-suspended;
54 };
55 };
56
57 sound {
58 compatible = "simple-audio-card";
59 simple-audio-card,format = "i2s";
60 simple-audio-card,name = "Analog RK809";
61 simple-audio-card,mclk-fs = <256>;
62
63 simple-audio-card,cpu {
64 sound-dai = <&i2s1_8ch>;
65 };
66
67 simple-audio-card,codec {
68 sound-dai = <&rk809>;
69 };
70 };
71
72 sdio_pwrseq: sdio-pwrseq {
73 status = "okay";
74 compatible = "mmc-pwrseq-simple";
75 clocks = <&rk809 1>;
76 clock-names = "ext_clock";
77 pinctrl-names = "default";
78 pinctrl-0 = <&wifi_enable_h>;
79 reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
80 post-power-on-delay-ms = <100>;
81 power-off-delay-us = <5000000>;
82 };
83
84 vcc3v3_pcie_p: regulator-vcc3v3-pcie-p {
85 compatible = "regulator-fixed";
86 enable-active-high;
87 gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
88 pinctrl-names = "default";
89 pinctrl-0 = <&pcie_enable_h>;
90 regulator-name = "vcc3v3_pcie_p";
91 regulator-min-microvolt = <3300000>;
92 regulator-max-microvolt = <3300000>;
93 vin-supply = <&vcc_3v3>;
94 };
95
96 vcc5v0_in: regulator-vcc5v0-in {
97 compatible = "regulator-fixed";
98 regulator-name = "vcc5v0_in";
99 regulator-always-on;
100 regulator-boot-on;
101 regulator-min-microvolt = <5000000>;
102 regulator-max-microvolt = <5000000>;
103 };
104
105 vcc5v0_sys: regulator-vcc5v0-sys {
106 compatible = "regulator-fixed";
107 regulator-name = "vcc5v0_sys";
108 regulator-always-on;
109 regulator-boot-on;
110 regulator-min-microvolt = <5000000>;
111 regulator-max-microvolt = <5000000>;
112 vin-supply = <&vcc5v0_in>;
113 };
114
115 vcc3v3_sys: regulator-vcc3v3-sys {
116 compatible = "regulator-fixed";
117 regulator-name = "vcc3v3_sys";
118 regulator-min-microvolt = <3300000>;
119 regulator-max-microvolt = <3300000>;
120 regulator-always-on;
121 vin-supply = <&vcc5v0_sys>;
122 };
123
124 vcc5v0_usb30_host: regulator-vcc5v0-usb30-host {
125 compatible = "regulator-fixed";
126 regulator-name = "vcc5v0_usb30_host";
127 enable-active-high;
128 gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
129 pinctrl-names = "default";
130 pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
131 regulator-always-on;
132 regulator-min-microvolt = <5000000>;
133 regulator-max-microvolt = <5000000>;
134 vin-supply = <&vcc5v0_sys>;
135 };
136
137 vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
138 compatible = "regulator-fixed";
139 regulator-name = "vcc5v0_usb_otg";
140 enable-active-high;
141 gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
142 pinctrl-names = "default";
143 pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
144 regulator-always-on;
145 regulator-min-microvolt = <5000000>;
146 regulator-max-microvolt = <5000000>;
147 vin-supply = <&vcc5v0_sys>;
148 };
149 };
150
151 &combphy1 {
152 status = "okay";
153 };
154
155 &combphy2 {
156 status = "okay";
157 };
158
159 &cpu0 {
160 cpu-supply = <&vdd_cpu>;
161 };
162
163 &cpu1 {
164 cpu-supply = <&vdd_cpu>;
165 };
166
167 &cpu2 {
168 cpu-supply = <&vdd_cpu>;
169 };
170
171 &cpu3 {
172 cpu-supply = <&vdd_cpu>;
173 };
174
175 &gmac1 {
176 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>,
177 <&cru SCLK_GMAC1_RGMII_SPEED>,
178 <&cru SCLK_GMAC1>;
179 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>,
180 <&cru SCLK_GMAC1>,
181 <&gmac1_clkin>;
182 clock_in_out = "input";
183 phy-mode = "rgmii";
184 phy-supply = <&vcc_3v3>;
185 pinctrl-names = "default";
186 pinctrl-0 = <&gmac1m1_miim
187 &gmac1m1_tx_bus2
188 &gmac1m1_rx_bus2
189 &gmac1m1_rgmii_clk
190 &gmac1m1_clkinout
191 &gmac1m1_rgmii_bus>;
192 snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
193 snps,reset-active-low;
194 /* Reset time is 20ms, 100ms for rtl8211f, also works well here */
195 snps,reset-delays-us = <0 20000 100000>;
196 tx_delay = <0x4f>;
197 rx_delay = <0x24>;
198 phy-handle = <&rgmii_phy1>;
199 status = "okay";
200 };
201
202 &gpu {
203 mali-supply = <&vdd_gpu>;
204 status = "okay";
205 };
206
207 &hdmi {
208 avdd-0v9-supply = <&vdda0v9_image>;
209 avdd-1v8-supply = <&vcca1v8_image>;
210 status = "okay";
211 };
212
213 &hdmi_in {
214 hdmi_in_vp0: endpoint {
215 remote-endpoint = <&vp0_out_hdmi>;
216 };
217 };
218
219 &hdmi_out {
220 hdmi_out_con: endpoint {
221 remote-endpoint = <&hdmi_con_in>;
222 };
223 };
224
225 &hdmi_sound {
226 status = "okay";
227 };
228
229 &i2c0 {
230 status = "okay";
231
232 vdd_cpu: regulator@1c {
233 compatible = "tcs,tcs4525";
234 reg = <0x1c>;
235 fcs,suspend-voltage-selector = <1>;
236 regulator-name = "vdd_cpu";
237 regulator-min-microvolt = <800000>;
238 regulator-max-microvolt = <1150000>;
239 regulator-ramp-delay = <2300>;
240 regulator-always-on;
241 regulator-boot-on;
242 vin-supply = <&vcc5v0_sys>;
243
244 regulator-state-mem {
245 regulator-off-in-suspend;
246 };
247 };
248
249 rk809: pmic@20 {
250 compatible = "rockchip,rk809";
251 reg = <0x20>;
252 interrupt-parent = <&gpio0>;
253 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
254 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
255 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
256 clock-names = "mclk";
257 clocks = <&cru I2S1_MCLKOUT_TX>;
258 clock-output-names = "rk808-clkout1", "rk808-clkout2";
259
260 pinctrl-names = "default";
261 pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
262 system-power-controller;
263 #sound-dai-cells = <0>;
264 wakeup-source;
265 #clock-cells = <1>;
266
267 vcc1-supply = <&vcc3v3_sys>;
268 vcc2-supply = <&vcc3v3_sys>;
269 vcc3-supply = <&vcc3v3_sys>;
270 vcc4-supply = <&vcc3v3_sys>;
271 vcc5-supply = <&vcc3v3_sys>;
272 vcc6-supply = <&vcc3v3_sys>;
273 vcc7-supply = <&vcc3v3_sys>;
274 vcc8-supply = <&vcc3v3_sys>;
275 vcc9-supply = <&vcc3v3_sys>;
276
277 regulators {
278 vdd_log: DCDC_REG1 {
279 regulator-name = "vdd_log";
280 regulator-always-on;
281 regulator-boot-on;
282 regulator-min-microvolt = <500000>;
283 regulator-max-microvolt = <1350000>;
284 regulator-ramp-delay = <6001>;
285
286 regulator-state-mem {
287 regulator-on-in-suspend;
288 regulator-suspend-microvolt = <900000>;
289 };
290 };
291
292 vdd_gpu: DCDC_REG2 {
293 regulator-name = "vdd_gpu";
294 regulator-always-on;
295 regulator-boot-on;
296 regulator-min-microvolt = <500000>;
297 regulator-max-microvolt = <1350000>;
298 regulator-ramp-delay = <6001>;
299
300 regulator-state-mem {
301 regulator-off-in-suspend;
302 regulator-suspend-microvolt = <900000>;
303 };
304 };
305
306 vcc_ddr: DCDC_REG3 {
307 regulator-name = "vcc_ddr";
308 regulator-always-on;
309 regulator-boot-on;
310 regulator-initial-mode = <0x2>;
311 regulator-state-mem {
312 regulator-on-in-suspend;
313 };
314 };
315
316 vdd_npu: DCDC_REG4 {
317 regulator-name = "vdd_npu";
318 regulator-min-microvolt = <900000>;
319 regulator-max-microvolt = <1350000>;
320 regulator-initial-mode = <0x2>;
321 regulator-state-mem {
322 regulator-off-in-suspend;
323 };
324 };
325
326 vcc_1v8: DCDC_REG5 {
327 regulator-name = "vcc_1v8";
328 regulator-always-on;
329 regulator-boot-on;
330 regulator-min-microvolt = <1800000>;
331 regulator-max-microvolt = <1800000>;
332
333 regulator-state-mem {
334 regulator-on-in-suspend;
335 regulator-suspend-microvolt = <1800000>;
336 };
337 };
338
339 vdda0v9_image: LDO_REG1 {
340 regulator-name = "vdda0v9_image";
341 regulator-always-on;
342 regulator-boot-on;
343 regulator-min-microvolt = <900000>;
344 regulator-max-microvolt = <900000>;
345
346 regulator-state-mem {
347 regulator-on-in-suspend;
348 regulator-suspend-microvolt = <900000>;
349 };
350 };
351
352 vdda_0v9: LDO_REG2 {
353 regulator-name = "vdda_0v9";
354 regulator-always-on;
355 regulator-boot-on;
356 regulator-min-microvolt = <900000>;
357 regulator-max-microvolt = <900000>;
358
359 regulator-state-mem {
360 regulator-on-in-suspend;
361 regulator-suspend-microvolt = <900000>;
362 };
363 };
364
365 vdda0v9_pmu: LDO_REG3 {
366 regulator-name = "vdda0v9_pmu";
367 regulator-always-on;
368 regulator-boot-on;
369 regulator-min-microvolt = <900000>;
370 regulator-max-microvolt = <900000>;
371 regulator-state-mem {
372 regulator-on-in-suspend;
373 regulator-suspend-microvolt = <900000>;
374 };
375 };
376
377 vccio_acodec: LDO_REG4 {
378 regulator-name = "vccio_acodec";
379 regulator-always-on;
380 regulator-boot-on;
381 regulator-min-microvolt = <3300000>;
382 regulator-max-microvolt = <3300000>;
383
384 regulator-state-mem {
385 regulator-on-in-suspend;
386 regulator-suspend-microvolt = <3300000>;
387
388 };
389 };
390
391 vccio_sd: LDO_REG5 {
392 regulator-name = "vccio_sd";
393 regulator-always-on;
394 regulator-boot-on;
395 regulator-min-microvolt = <1800000>;
396 regulator-max-microvolt = <3300000>;
397
398 regulator-state-mem {
399 regulator-on-in-suspend;
400 regulator-suspend-microvolt = <3300000>;
401 };
402 };
403
404 vcc3v3_pmu: LDO_REG6 {
405 regulator-name = "vcc3v3_pmu";
406 regulator-always-on;
407 regulator-boot-on;
408 regulator-min-microvolt = <3300000>;
409 regulator-max-microvolt = <3300000>;
410
411 regulator-state-mem {
412 regulator-on-in-suspend;
413 regulator-suspend-microvolt = <3300000>;
414 };
415 };
416
417 vcca_1v8: LDO_REG7 {
418 regulator-name = "vcca_1v8";
419 regulator-always-on;
420 regulator-boot-on;
421 regulator-min-microvolt = <1800000>;
422 regulator-max-microvolt = <1800000>;
423
424 regulator-state-mem {
425 regulator-on-in-suspend;
426 regulator-suspend-microvolt = <1800000>;
427 };
428 };
429
430 vcca1v8_pmu: LDO_REG8 {
431 regulator-name = "vcca1v8_pmu";
432 regulator-always-on;
433 regulator-boot-on;
434 regulator-min-microvolt = <1800000>;
435 regulator-max-microvolt = <1800000>;
436
437 regulator-state-mem {
438 regulator-on-in-suspend;
439 regulator-suspend-microvolt = <1800000>;
440 };
441 };
442
443 vcca1v8_image: LDO_REG9 {
444 regulator-name = "vcca1v8_image";
445 regulator-always-on;
446 regulator-boot-on;
447 regulator-min-microvolt = <1800000>;
448 regulator-max-microvolt = <1800000>;
449
450 regulator-state-mem {
451 regulator-on-in-suspend;
452 regulator-suspend-microvolt = <1800000>;
453 };
454 };
455
456 vcc_3v3: SWITCH_REG1 {
457 regulator-boot-on;
458 regulator-name = "vcc_3v3";
459 };
460
461 vcc3v3_sd: SWITCH_REG2 {
462 regulator-name = "vcc3v3_sd";
463 };
464 };
465 };
466 };
467
468 /* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */
469 &i2c2 {
470 pinctrl-names = "default";
471 pinctrl-0 = <&i2c2m1_xfer>;
472 status = "okay";
473 };
474
475 /* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */
476 &i2c3 {
477 pinctrl-names = "default";
478 pinctrl-0 = <&i2c3m1_xfer>;
479 status = "okay";
480 };
481
482 /*
483 * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3
484 * pin 27 - i2c4_sda_m0
485 * pin 28 - i2c4_scl_m0
486 */
487 &i2c4 {
488 status = "okay";
489 };
490
491 /*
492 * i2c5_m0 is exposed on PI40
493 * pin 29 - i2c5_scl_m0
494 * pin 31 - i2c5_sda_m0
495 */
496 &i2c5 {
497 status = "disabled";
498 };
499
500 &i2s0_8ch {
501 status = "okay";
502 };
503
504 &i2s1_8ch {
505 pinctrl-names = "default";
506 pinctrl-0 = <&i2s1m0_sclktx
507 &i2s1m0_lrcktx
508 &i2s1m0_sdi0
509 &i2s1m0_sdo0>;
510 rockchip,trcm-sync-tx-only;
511 status = "okay";
512 };
513
514 &mdio1 {
515 rgmii_phy1: ethernet-phy@1 {
516 compatible = "ethernet-phy-ieee802.3-c22";
517 reg = <0x1>;
518 };
519 };
520
521 &pcie2x1 {
522 pinctrl-names = "default";
523 pinctrl-0 = <&pcie_reset_h>;
524 reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
525 vpcie3v3-supply = <&vcc3v3_pcie_p>;
526 status = "okay";
527 };
528
529 &pinctrl {
530 bt {
531 bt_enable_h: bt-enable-h {
532 rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
533 };
534
535 bt_host_wake_l: bt-host-wake-l {
536 rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
537 };
538
539 bt_wake_l: bt-wake-l {
540 rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
541 };
542 };
543
544 leds {
545 user_led_enable_h: user-led-enable-h {
546 rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
547 };
548 };
549
550 pcie {
551 pcie_enable_h: pcie-enable-h {
552 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
553 };
554
555 pcie_reset_h: pcie-reset-h {
556 rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
557 };
558 };
559
560 pmic {
561 pmic_int: pmic_int {
562 rockchip,pins =
563 <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
564 };
565 };
566
567 sdio-pwrseq {
568 wifi_enable_h: wifi-enable-h {
569 rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
570 };
571 };
572
573 usb {
574 vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
575 rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
576 };
577
578 vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
579 rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
580 };
581 };
582 };
583
584 &pmu_io_domains {
585 status = "okay";
586 pmuio1-supply = <&vcc3v3_pmu>;
587 pmuio2-supply = <&vcca1v8_pmu>;
588 vccio1-supply = <&vccio_acodec>;
589 vccio2-supply = <&vcc_1v8>;
590 vccio3-supply = <&vccio_sd>;
591 vccio4-supply = <&vcca1v8_pmu>;
592 vccio5-supply = <&vcc_3v3>;
593 vccio6-supply = <&vcc_3v3>;
594 vccio7-supply = <&vcc_3v3>;
595 };
596
597 &saradc {
598 vref-supply = <&vcca_1v8>;
599 status = "okay";
600 };
601
602 &sdhci {
603 bus-width = <8>;
604 mmc-hs200-1_8v;
605 non-removable;
606 vmmc-supply = <&vcc_3v3>;
607 vqmmc-supply = <&vcc_1v8>;
608 status = "okay";
609 };
610
611 &sdmmc0 {
612 bus-width = <4>;
613 cap-sd-highspeed;
614 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
615 disable-wp;
616 pinctrl-names = "default";
617 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
618 sd-uhs-sdr50;
619 vmmc-supply = <&vcc3v3_sd>;
620 vqmmc-supply = <&vccio_sd>;
621 status = "okay";
622 };
623
624 &sdmmc1 {
625 bus-width = <4>;
626 cap-sd-highspeed;
627 cap-sdio-irq;
628 keep-power-in-suspend;
629 mmc-pwrseq = <&sdio_pwrseq>;
630 non-removable;
631 pinctrl-names = "default";
632 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
633 vmmc-supply = <&vcc3v3_sys>;
634 vqmmc-supply = <&vcca1v8_pmu>;
635 status = "okay";
636 };
637
638 &sfc {
639 pinctrl-0 = <&fspi_pins>;
640 pinctrl-names = "default";
641 #address-cells = <1>;
642 #size-cells = <0>;
643 status = "okay";
644
645 flash@0 {
646 compatible = "jedec,spi-nor";
647 reg = <0>;
648 spi-max-frequency = <24000000>;
649 spi-rx-bus-width = <4>;
650 spi-tx-bus-width = <1>;
651 vcc-supply = <&vcc_1v8>;
652 };
653 };
654
655 &tsadc {
656 rockchip,hw-tshut-mode = <1>;
657 rockchip,hw-tshut-polarity = <0>;
658 status = "okay";
659 };
660
661 &uart1 {
662 dma-names = "tx", "rx";
663 pinctrl-names = "default";
664 pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
665 status = "okay";
666 uart-has-rtscts;
667
668 bluetooth {
669 compatible = "brcm,bcm4345c5";
670 clocks = <&rk809 1>;
671 clock-names = "lpo";
672 device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
673 host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
674 shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
675 pinctrl-names = "default";
676 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
677 vbat-supply = <&vcc3v3_sys>;
678 vddio-supply = <&vcca1v8_pmu>;
679 };
680 };
681
682 /*
683 * uart2_m0 is exposed on PI40
684 * pin 8 - uart2_tx_m0
685 * pin 10 - uart2_rx_m0
686 */
687 &uart2 {
688 status = "okay";
689 };
690
691 &usb2phy0_host {
692 phy-supply = <&vcc5v0_usb30_host>;
693 status = "okay";
694 };
695
696 &usb2phy0_otg {
697 phy-supply = <&vcc5v0_usb_otg>;
698 status = "okay";
699 };
700
701 &usb2phy1_otg {
702 phy-supply = <&vcc5v0_usb30_host>;
703 status = "okay";
704 };
705
706 &usb2phy0 {
707 status = "okay";
708 };
709
710 &usb2phy1 {
711 status = "okay";
712 };
713
714 &usb_host0_xhci {
715 status = "okay";
716 };
717
718 &usb_host1_xhci {
719 status = "okay";
720 };
721
722 &usb_host0_ehci {
723 status = "okay";
724 };
725
726 &usb_host0_ohci {
727 status = "okay";
728 };
729
730 &vop {
731 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
732 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
733 status = "okay";
734 };
735
736 &vop_mmu {
737 status = "okay";
738 };
739
740 &vp0 {
741 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
742 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
743 remote-endpoint = <&hdmi_in_vp0>;
744 };
745 };