| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/gpio/gpio.h> |
| 6 |
#include <dt-bindings/input/linux-event-codes.h> |
| 7 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 8 |
#include "rk3566-powkiddy-rk2023.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Powkiddy RGB30"; |
| 12 |
compatible = "powkiddy,rgb30", "rockchip,rk3566"; |
| 13 |
}; |
| 14 |
|
| 15 |
&cru { |
| 16 |
assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, |
| 17 |
<&pmucru PLL_PPLL>, <&cru PLL_VPLL>; |
| 18 |
assigned-clock-rates = <32768>, <1200000000>, |
| 19 |
<200000000>, <292500000>; |
| 20 |
}; |
| 21 |
|
| 22 |
&dsi0 { |
| 23 |
panel: panel@0 { |
| 24 |
compatible = "powkiddy,rgb30-panel"; |
| 25 |
reg = <0>; |
| 26 |
backlight = <&backlight>; |
| 27 |
pinctrl-names = "default"; |
| 28 |
pinctrl-0 = <&lcd_rst>; |
| 29 |
reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; |
| 30 |
vcc-supply = <&vcc3v3_lcd0_n>; |
| 31 |
iovcc-supply = <&vcc3v3_lcd0_n>; |
| 32 |
|
| 33 |
port { |
| 34 |
mipi_in_panel: endpoint { |
| 35 |
remote-endpoint = <&mipi_out_panel>; |
| 36 |
}; |
| 37 |
}; |
| 38 |
}; |
| 39 |
}; |
| 40 |
|
| 41 |
&i2c0 { |
| 42 |
vdd_cpu: regulator@1c { |
| 43 |
compatible = "tcs,tcs4525"; |
| 44 |
reg = <0x1c>; |
| 45 |
fcs,suspend-voltage-selector = <1>; |
| 46 |
regulator-always-on; |
| 47 |
regulator-boot-on; |
| 48 |
regulator-min-microvolt = <712500>; |
| 49 |
regulator-max-microvolt = <1390000>; |
| 50 |
regulator-name = "vdd_cpu"; |
| 51 |
regulator-ramp-delay = <2300>; |
| 52 |
vin-supply = <&vcc_sys>; |
| 53 |
regulator-state-mem { |
| 54 |
regulator-off-in-suspend; |
| 55 |
}; |
| 56 |
}; |
| 57 |
}; |