| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/gpio/gpio.h> |
| 6 |
#include <dt-bindings/input/linux-event-codes.h> |
| 7 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 8 |
#include "rk3566-powkiddy-rk2023.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Powkiddy RGB10MAX3"; |
| 12 |
compatible = "powkiddy,rgb10max3", "rockchip,rk3566"; |
| 13 |
}; |
| 14 |
|
| 15 |
&bluetooth { |
| 16 |
compatible = "realtek,rtl8723ds-bt"; |
| 17 |
}; |
| 18 |
|
| 19 |
&cru { |
| 20 |
assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, |
| 21 |
<&pmucru PLL_PPLL>, <&cru PLL_VPLL>; |
| 22 |
assigned-clock-rates = <32768>, <1200000000>, |
| 23 |
<200000000>, <126400000>; |
| 24 |
}; |
| 25 |
|
| 26 |
&dsi0 { |
| 27 |
panel: panel@0 { |
| 28 |
compatible = "powkiddy,rgb10max3-panel"; |
| 29 |
reg = <0>; |
| 30 |
backlight = <&backlight>; |
| 31 |
iovcc-supply = <&vcc3v3_lcd0_n>; |
| 32 |
pinctrl-0 = <&lcd_rst>; |
| 33 |
pinctrl-names = "default"; |
| 34 |
reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; |
| 35 |
rotation = <270>; |
| 36 |
vcc-supply = <&vcc3v3_lcd0_n>; |
| 37 |
|
| 38 |
port { |
| 39 |
mipi_in_panel: endpoint { |
| 40 |
remote-endpoint = <&mipi_out_panel>; |
| 41 |
}; |
| 42 |
}; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
&green_led { |
| 47 |
default-state = "on"; |
| 48 |
function = LED_FUNCTION_POWER; |
| 49 |
}; |
| 50 |
|
| 51 |
&i2c0 { |
| 52 |
vdd_cpu: regulator@40 { |
| 53 |
compatible = "fcs,fan53555"; |
| 54 |
reg = <0x40>; |
| 55 |
fcs,suspend-voltage-selector = <1>; |
| 56 |
regulator-always-on; |
| 57 |
regulator-boot-on; |
| 58 |
regulator-min-microvolt = <712500>; |
| 59 |
regulator-max-microvolt = <1390000>; |
| 60 |
regulator-name = "vdd_cpu"; |
| 61 |
regulator-ramp-delay = <2300>; |
| 62 |
vin-supply = <&vcc_sys>; |
| 63 |
regulator-state-mem { |
| 64 |
regulator-off-in-suspend; |
| 65 |
}; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
&leds { |
| 70 |
amber_led: led-2 { |
| 71 |
color = <LED_COLOR_ID_AMBER>; |
| 72 |
function = LED_FUNCTION_CHARGING; |
| 73 |
max-brightness = <255>; |
| 74 |
pwms = <&pwm0 0 25000 0>; |
| 75 |
}; |
| 76 |
}; |
| 77 |
|
| 78 |
&pwm0 { |
| 79 |
pinctrl-0 = <&pwm0m1_pins>; |
| 80 |
pinctrl-names = "default"; |
| 81 |
status = "okay"; |
| 82 |
}; |
| 83 |
|
| 84 |
&red_led { |
| 85 |
default-state = "off"; |
| 86 |
function = LED_FUNCTION_STATUS; |
| 87 |
}; |