| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include "rk3566-orangepi-3b.dtsi" |
| 6 |
|
| 7 |
/ { |
| 8 |
model = "Xunlong Orange Pi 3B v2.1"; |
| 9 |
compatible = "xunlong,orangepi-3b-v2.1", "xunlong,orangepi-3b", "rockchip,rk3566"; |
| 10 |
|
| 11 |
vccio_phy1: regulator-1v8-vccio-phy { |
| 12 |
compatible = "regulator-fixed"; |
| 13 |
regulator-name = "vccio_phy1"; |
| 14 |
regulator-always-on; |
| 15 |
regulator-boot-on; |
| 16 |
regulator-max-microvolt = <1800000>; |
| 17 |
regulator-min-microvolt = <1800000>; |
| 18 |
}; |
| 19 |
}; |
| 20 |
|
| 21 |
&pmu_io_domains { |
| 22 |
vccio5-supply = <&vccio_phy1>; |
| 23 |
}; |
| 24 |
|
| 25 |
&gmac1 { |
| 26 |
phy-handle = <&rgmii_phy1>; |
| 27 |
status = "okay"; |
| 28 |
}; |
| 29 |
|
| 30 |
&mdio1 { |
| 31 |
rgmii_phy1: ethernet-phy@1 { |
| 32 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 33 |
reg = <1>; |
| 34 |
reset-assert-us = <20000>; |
| 35 |
reset-deassert-us = <50000>; |
| 36 |
reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>; |
| 37 |
}; |
| 38 |
}; |
| 39 |
|
| 40 |
&sdmmc1 { |
| 41 |
#address-cells = <1>; |
| 42 |
#size-cells = <0>; |
| 43 |
|
| 44 |
brcmf: wifi@1 { |
| 45 |
compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; |
| 46 |
reg = <1>; |
| 47 |
interrupt-parent = <&gpio0>; |
| 48 |
interrupts = <RK_PD6 IRQ_TYPE_LEVEL_HIGH>; |
| 49 |
interrupt-names = "host-wake"; |
| 50 |
pinctrl-names = "default"; |
| 51 |
pinctrl-0 = <&wifi_wake_host_h>; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
&uart1 { |
| 56 |
bluetooth { |
| 57 |
compatible = "brcm,bcm4345c5"; |
| 58 |
clocks = <&rk809 1>; |
| 59 |
clock-names = "lpo"; |
| 60 |
interrupt-parent = <&gpio2>; |
| 61 |
interrupts = <RK_PC0 IRQ_TYPE_LEVEL_HIGH>; |
| 62 |
interrupt-names = "host-wakeup"; |
| 63 |
device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; |
| 64 |
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 65 |
pinctrl-names = "default"; |
| 66 |
pinctrl-0 = <&bt_reg_on_h &bt_wake_host_h &host_wake_bt_h>; |
| 67 |
vbat-supply = <&vcc_3v3>; |
| 68 |
vddio-supply = <&vcc_1v8>; |
| 69 |
}; |
| 70 |
}; |