| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/* |
| 4 |
* Author: Piotr Oniszczuk [email protected] |
| 5 |
* Based on Quartz64 DT by: Peter Geis [email protected] |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/leds/common.h> |
| 12 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 13 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 14 |
#include "rk3566.dtsi" |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Rockchip RK3566 BOX DEMO Board"; |
| 18 |
compatible = "rockchip,rk3566-box-demo", "rockchip,rk3566"; |
| 19 |
|
| 20 |
aliases { |
| 21 |
ethernet0 = &gmac1; |
| 22 |
mmc0 = &sdhci; |
| 23 |
mmc1 = &sdmmc0; |
| 24 |
mmc2 = &sdmmc1; |
| 25 |
}; |
| 26 |
|
| 27 |
chosen: chosen { |
| 28 |
stdout-path = "serial2:1500000n8"; |
| 29 |
}; |
| 30 |
|
| 31 |
gmac1_clkin: external-gmac1-clock { |
| 32 |
compatible = "fixed-clock"; |
| 33 |
clock-frequency = <125000000>; |
| 34 |
clock-output-names = "gmac1_clkin"; |
| 35 |
#clock-cells = <0>; |
| 36 |
}; |
| 37 |
|
| 38 |
hdmi-con { |
| 39 |
compatible = "hdmi-connector"; |
| 40 |
type = "a"; |
| 41 |
|
| 42 |
port { |
| 43 |
hdmi_con_in: endpoint { |
| 44 |
remote-endpoint = <&hdmi_out_con>; |
| 45 |
}; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
ir-receiver { |
| 50 |
compatible = "gpio-ir-receiver"; |
| 51 |
gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>; |
| 52 |
pinctrl-0 = <&ir_int>; |
| 53 |
linux,rc-map-name = "rc-beelink-gs1"; |
| 54 |
status = "okay"; |
| 55 |
}; |
| 56 |
|
| 57 |
leds { |
| 58 |
compatible = "gpio-leds"; |
| 59 |
|
| 60 |
led_work: led-0 { |
| 61 |
gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; |
| 62 |
function = LED_FUNCTION_HEARTBEAT; |
| 63 |
color = <LED_COLOR_ID_BLUE>; |
| 64 |
linux,default-trigger = "heartbeat"; |
| 65 |
pinctrl-names = "default"; |
| 66 |
pinctrl-0 = <&led_work_en>; |
| 67 |
}; |
| 68 |
}; |
| 69 |
|
| 70 |
sdio_pwrseq: sdio-pwrseq { |
| 71 |
status = "okay"; |
| 72 |
compatible = "mmc-pwrseq-simple"; |
| 73 |
clocks = <&pmucru CLK_RTC_32K>; |
| 74 |
clock-names = "ext_clock"; |
| 75 |
pinctrl-names = "default"; |
| 76 |
pinctrl-0 = <&wifi_enable_h &wifi_32k>; |
| 77 |
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; |
| 78 |
}; |
| 79 |
|
| 80 |
spdif_dit: spdif-dit { |
| 81 |
compatible = "linux,spdif-dit"; |
| 82 |
#sound-dai-cells = <0>; |
| 83 |
}; |
| 84 |
|
| 85 |
spdif_sound: spdif-sound { |
| 86 |
compatible = "simple-audio-card"; |
| 87 |
simple-audio-card,name = "SPDIF"; |
| 88 |
|
| 89 |
simple-audio-card,cpu { |
| 90 |
sound-dai = <&spdif>; |
| 91 |
}; |
| 92 |
|
| 93 |
simple-audio-card,codec { |
| 94 |
sound-dai = <&spdif_dit>; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
vcc12v0_dcin: regulator-vcc12v0-dcin { |
| 99 |
compatible = "regulator-fixed"; |
| 100 |
regulator-name = "vcc12v0_dcin"; |
| 101 |
regulator-always-on; |
| 102 |
regulator-boot-on; |
| 103 |
regulator-min-microvolt = <12000000>; |
| 104 |
regulator-max-microvolt = <12000000>; |
| 105 |
}; |
| 106 |
|
| 107 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 108 |
compatible = "regulator-fixed"; |
| 109 |
regulator-name = "vcc5v0_sys"; |
| 110 |
regulator-always-on; |
| 111 |
regulator-boot-on; |
| 112 |
regulator-min-microvolt = <5000000>; |
| 113 |
regulator-max-microvolt = <5000000>; |
| 114 |
vin-supply = <&vcc12v0_dcin>; |
| 115 |
}; |
| 116 |
|
| 117 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 118 |
compatible = "regulator-fixed"; |
| 119 |
regulator-name = "vcc3v3_sys"; |
| 120 |
regulator-always-on; |
| 121 |
regulator-boot-on; |
| 122 |
regulator-min-microvolt = <3300000>; |
| 123 |
regulator-max-microvolt = <3300000>; |
| 124 |
vin-supply = <&vcc12v0_dcin>; |
| 125 |
}; |
| 126 |
|
| 127 |
vcc_3v3: regulator-vcc-3v3 { |
| 128 |
compatible = "regulator-fixed"; |
| 129 |
regulator-name = "vcc_3v3"; |
| 130 |
regulator-always-on; |
| 131 |
regulator-boot-on; |
| 132 |
regulator-min-microvolt = <3300000>; |
| 133 |
regulator-max-microvolt = <3300000>; |
| 134 |
vin-supply = <&vcc3v3_sys>; |
| 135 |
}; |
| 136 |
|
| 137 |
vcc5v0_usb_host: regulator-vcc5v0-usb-host { |
| 138 |
compatible = "regulator-fixed"; |
| 139 |
enable-active-high; |
| 140 |
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| 141 |
pinctrl-names = "default"; |
| 142 |
pinctrl-0 = <&vcc5v0_usb_host_en>; |
| 143 |
regulator-name = "vcc5v0_usb_host"; |
| 144 |
regulator-min-microvolt = <5000000>; |
| 145 |
regulator-max-microvolt = <5000000>; |
| 146 |
vin-supply = <&vcc5v0_sys>; |
| 147 |
}; |
| 148 |
|
| 149 |
vcc5v0_usb2_otg: regulator-vcc5v0-usb2-otg { |
| 150 |
compatible = "regulator-fixed"; |
| 151 |
enable-active-high; |
| 152 |
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; |
| 153 |
pinctrl-names = "default"; |
| 154 |
pinctrl-0 = <&vcc5v0_usb2_otg_en>; |
| 155 |
regulator-name = "vcc5v0_usb_otg"; |
| 156 |
regulator-min-microvolt = <5000000>; |
| 157 |
regulator-max-microvolt = <5000000>; |
| 158 |
vin-supply = <&vcc5v0_sys>; |
| 159 |
}; |
| 160 |
|
| 161 |
vcca_1v8: regulator-vcca-1v8 { |
| 162 |
compatible = "regulator-fixed"; |
| 163 |
regulator-name = "vcca_1v8"; |
| 164 |
regulator-always-on; |
| 165 |
regulator-boot-on; |
| 166 |
regulator-min-microvolt = <1800000>; |
| 167 |
regulator-max-microvolt = <1800000>; |
| 168 |
vin-supply = <&vcc3v3_sys>; |
| 169 |
}; |
| 170 |
|
| 171 |
vdda_0v9: regulator-vdda-0v9 { |
| 172 |
compatible = "regulator-fixed"; |
| 173 |
regulator-name = "vdda_0v9"; |
| 174 |
regulator-always-on; |
| 175 |
regulator-boot-on; |
| 176 |
regulator-min-microvolt = <900000>; |
| 177 |
regulator-max-microvolt = <900000>; |
| 178 |
vin-supply = <&vcc3v3_sys>; |
| 179 |
}; |
| 180 |
|
| 181 |
vdd_fixed: regulator-vdd-fixed { |
| 182 |
compatible = "regulator-fixed"; |
| 183 |
regulator-name = "vdd_fixed"; |
| 184 |
regulator-min-microvolt = <950000>; |
| 185 |
regulator-max-microvolt = <950000>; |
| 186 |
regulator-always-on; |
| 187 |
regulator-boot-on; |
| 188 |
vin-supply = <&vcc5v0_sys>; |
| 189 |
}; |
| 190 |
|
| 191 |
vdd_cpu: regulator-vdd-cpu { |
| 192 |
compatible = "pwm-regulator"; |
| 193 |
pwms = <&pwm0 0 5000 1>; |
| 194 |
regulator-name = "vdd_cpu"; |
| 195 |
regulator-min-microvolt = <800000>; |
| 196 |
regulator-max-microvolt = <1200000>; |
| 197 |
regulator-always-on; |
| 198 |
regulator-boot-on; |
| 199 |
regulator-settling-time-up-us = <250>; |
| 200 |
pwm-supply = <&vcc5v0_sys>; |
| 201 |
}; |
| 202 |
|
| 203 |
vdd_logic: regulator-vdd-logic { |
| 204 |
compatible = "pwm-regulator"; |
| 205 |
pwms = <&pwm1 0 5000 1>; |
| 206 |
regulator-name = "vdd_logic"; |
| 207 |
regulator-min-microvolt = <800000>; |
| 208 |
regulator-max-microvolt = <1100000>; |
| 209 |
regulator-always-on; |
| 210 |
regulator-boot-on; |
| 211 |
regulator-settling-time-up-us = <250>; |
| 212 |
pwm-supply = <&vcc5v0_sys>; |
| 213 |
}; |
| 214 |
}; |
| 215 |
|
| 216 |
&combphy1 { |
| 217 |
status = "okay"; |
| 218 |
}; |
| 219 |
|
| 220 |
&combphy2 { |
| 221 |
status = "okay"; |
| 222 |
}; |
| 223 |
|
| 224 |
&cpu0 { |
| 225 |
cpu-supply = <&vdd_cpu>; |
| 226 |
}; |
| 227 |
|
| 228 |
&cpu1 { |
| 229 |
cpu-supply = <&vdd_cpu>; |
| 230 |
}; |
| 231 |
|
| 232 |
&cpu2 { |
| 233 |
cpu-supply = <&vdd_cpu>; |
| 234 |
}; |
| 235 |
|
| 236 |
&cpu3 { |
| 237 |
cpu-supply = <&vdd_cpu>; |
| 238 |
}; |
| 239 |
|
| 240 |
&gmac1 { |
| 241 |
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; |
| 242 |
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; |
| 243 |
phy-mode = "rgmii"; |
| 244 |
clock_in_out = "input"; |
| 245 |
pinctrl-names = "default"; |
| 246 |
pinctrl-0 = <&gmac1m1_miim |
| 247 |
&gmac1m1_tx_bus2 |
| 248 |
&gmac1m1_rx_bus2 |
| 249 |
&gmac1m1_rgmii_clk |
| 250 |
&gmac1m1_rgmii_bus |
| 251 |
&gmac1m1_clkinout>; |
| 252 |
snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; |
| 253 |
snps,reset-active-low; |
| 254 |
/* Reset time is 20ms, 100ms for rtl8211f */ |
| 255 |
snps,reset-delays-us = <0 20000 100000>; |
| 256 |
|
| 257 |
tx_delay = <0x4f>; |
| 258 |
rx_delay = <0x2d>; |
| 259 |
phy-handle = <&rgmii_phy1>; |
| 260 |
status = "okay"; |
| 261 |
}; |
| 262 |
|
| 263 |
&mdio1 { |
| 264 |
rgmii_phy1: ethernet-phy@1 { |
| 265 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 266 |
reg = <0x1>; |
| 267 |
}; |
| 268 |
}; |
| 269 |
|
| 270 |
&hdmi { |
| 271 |
assigned-clocks = <&cru CLK_HDMI_CEC>; |
| 272 |
assigned-clock-rates = <32768>; |
| 273 |
avdd-0v9-supply = <&vdda_0v9>; |
| 274 |
avdd-1v8-supply = <&vcca_1v8>; |
| 275 |
status = "okay"; |
| 276 |
}; |
| 277 |
|
| 278 |
&hdmi_in { |
| 279 |
hdmi_in_vp0: endpoint { |
| 280 |
remote-endpoint = <&vp0_out_hdmi>; |
| 281 |
}; |
| 282 |
}; |
| 283 |
|
| 284 |
&hdmi_out { |
| 285 |
hdmi_out_con: endpoint { |
| 286 |
remote-endpoint = <&hdmi_con_in>; |
| 287 |
}; |
| 288 |
}; |
| 289 |
|
| 290 |
&hdmi_sound { |
| 291 |
status = "okay"; |
| 292 |
}; |
| 293 |
|
| 294 |
&gpu { |
| 295 |
status = "okay"; |
| 296 |
}; |
| 297 |
|
| 298 |
&i2s0_8ch { |
| 299 |
status = "okay"; |
| 300 |
}; |
| 301 |
|
| 302 |
&i2s1_8ch { |
| 303 |
rockchip,trcm-sync-tx-only; |
| 304 |
status = "okay"; |
| 305 |
}; |
| 306 |
|
| 307 |
&pinctrl { |
| 308 |
bt { |
| 309 |
bt_enable_h: bt-enable-h { |
| 310 |
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 311 |
}; |
| 312 |
|
| 313 |
bt_host_wake_l: bt-host-wake-l { |
| 314 |
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; |
| 315 |
}; |
| 316 |
|
| 317 |
bt_wake_l: bt-wake-l { |
| 318 |
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 319 |
}; |
| 320 |
}; |
| 321 |
|
| 322 |
sdio-pwrseq { |
| 323 |
wifi_enable_h: wifi-enable-h { |
| 324 |
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 325 |
}; |
| 326 |
|
| 327 |
wifi_host_wake_h: wifi-host-wake-l { |
| 328 |
rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 329 |
}; |
| 330 |
|
| 331 |
wifi_32k: wifi-32k { |
| 332 |
rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>; |
| 333 |
}; |
| 334 |
}; |
| 335 |
|
| 336 |
usb { |
| 337 |
vcc5v0_usb_host_en: vcc5v0_usb_host_en { |
| 338 |
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 339 |
}; |
| 340 |
|
| 341 |
vcc5v0_usb2_otg_en: vcc5v0_usb2_otg_en { |
| 342 |
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 343 |
}; |
| 344 |
|
| 345 |
}; |
| 346 |
|
| 347 |
ir { |
| 348 |
ir_int: ir-int { |
| 349 |
rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 350 |
}; |
| 351 |
}; |
| 352 |
|
| 353 |
led { |
| 354 |
led_work_en: led_work_en { |
| 355 |
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 356 |
}; |
| 357 |
}; |
| 358 |
}; |
| 359 |
|
| 360 |
&pmu_io_domains { |
| 361 |
pmuio2-supply = <&vcc_3v3>; |
| 362 |
vccio1-supply = <&vcc_3v3>; |
| 363 |
vccio3-supply = <&vcc_3v3>; |
| 364 |
vccio4-supply = <&vcca_1v8>; |
| 365 |
vccio5-supply = <&vcc_3v3>; |
| 366 |
vccio6-supply = <&vcca_1v8>; |
| 367 |
vccio7-supply = <&vcc_3v3>; |
| 368 |
status = "okay"; |
| 369 |
}; |
| 370 |
|
| 371 |
&pwm0 { |
| 372 |
status = "okay"; |
| 373 |
}; |
| 374 |
|
| 375 |
&pwm1 { |
| 376 |
status = "okay"; |
| 377 |
}; |
| 378 |
|
| 379 |
&sdhci { |
| 380 |
bus-width = <8>; |
| 381 |
mmc-hs200-1_8v; |
| 382 |
non-removable; |
| 383 |
status = "okay"; |
| 384 |
}; |
| 385 |
|
| 386 |
&sdmmc0 { |
| 387 |
bus-width = <4>; |
| 388 |
cap-sd-highspeed; |
| 389 |
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 390 |
disable-wp; |
| 391 |
pinctrl-names = "default"; |
| 392 |
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; |
| 393 |
vmmc-supply = <&vcc_3v3>; |
| 394 |
status = "okay"; |
| 395 |
}; |
| 396 |
|
| 397 |
&sdmmc1 { |
| 398 |
/* WiFi & BT combo module AMPAK AP6398S */ |
| 399 |
#address-cells = <1>; |
| 400 |
#size-cells = <0>; |
| 401 |
bus-width = <4>; |
| 402 |
clock-frequency = <150000000>; |
| 403 |
cap-sdio-irq; |
| 404 |
cap-sd-highspeed; |
| 405 |
sd-uhs-sdr104; |
| 406 |
keep-power-in-suspend; |
| 407 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 408 |
non-removable; |
| 409 |
pinctrl-names = "default"; |
| 410 |
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; |
| 411 |
vmmc-supply = <&vcc_3v3>; |
| 412 |
vqmmc-supply = <&vcca_1v8>; |
| 413 |
status = "okay"; |
| 414 |
|
| 415 |
brcmf: wifi@1 { |
| 416 |
compatible = "brcm,bcm4329-fmac"; |
| 417 |
reg = <1>; |
| 418 |
interrupt-parent = <&gpio2>; |
| 419 |
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_HIGH>; |
| 420 |
interrupt-names = "host-wake"; |
| 421 |
pinctrl-names = "default"; |
| 422 |
pinctrl-0 = <&wifi_host_wake_h>; |
| 423 |
}; |
| 424 |
}; |
| 425 |
|
| 426 |
&spdif { |
| 427 |
status = "okay"; |
| 428 |
}; |
| 429 |
|
| 430 |
&spi1 { |
| 431 |
pinctrl-names = "default"; |
| 432 |
pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; |
| 433 |
}; |
| 434 |
|
| 435 |
&tsadc { |
| 436 |
/* tshut mode 0:CRU 1:GPIO */ |
| 437 |
rockchip,hw-tshut-mode = <1>; |
| 438 |
/* tshut polarity 0:LOW 1:HIGH */ |
| 439 |
rockchip,hw-tshut-polarity = <0>; |
| 440 |
status = "okay"; |
| 441 |
}; |
| 442 |
|
| 443 |
&uart1 { |
| 444 |
pinctrl-names = "default"; |
| 445 |
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; |
| 446 |
status = "okay"; |
| 447 |
uart-has-rtscts; |
| 448 |
|
| 449 |
bluetooth { |
| 450 |
compatible = "brcm,bcm43438-bt"; |
| 451 |
clocks = <&pmucru CLK_RTC_32K>; |
| 452 |
clock-names = "txco"; |
| 453 |
device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; |
| 454 |
host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; |
| 455 |
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 456 |
pinctrl-names = "default"; |
| 457 |
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; |
| 458 |
vbat-supply = <&vcc3v3_sys>; |
| 459 |
vddio-supply = <&vcca_1v8>; |
| 460 |
}; |
| 461 |
}; |
| 462 |
|
| 463 |
&uart2 { |
| 464 |
status = "okay"; |
| 465 |
}; |
| 466 |
|
| 467 |
&vop { |
| 468 |
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| 469 |
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 470 |
status = "okay"; |
| 471 |
}; |
| 472 |
|
| 473 |
&vop_mmu { |
| 474 |
status = "okay"; |
| 475 |
}; |
| 476 |
|
| 477 |
&vp0 { |
| 478 |
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 479 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 480 |
remote-endpoint = <&hdmi_in_vp0>; |
| 481 |
}; |
| 482 |
}; |
| 483 |
|
| 484 |
&vpu { |
| 485 |
status = "okay"; |
| 486 |
}; |
| 487 |
|
| 488 |
&vdpu_mmu { |
| 489 |
status = "okay"; |
| 490 |
}; |
| 491 |
|
| 492 |
&usb2phy0_host { |
| 493 |
phy-supply = <&vcc5v0_usb_host>; |
| 494 |
status = "okay"; |
| 495 |
}; |
| 496 |
|
| 497 |
&usb2phy0_otg { |
| 498 |
phy-supply = <&vcc5v0_usb2_otg>; |
| 499 |
status = "okay"; |
| 500 |
}; |
| 501 |
|
| 502 |
&usb2phy1_host { |
| 503 |
phy-supply = <&vcc5v0_usb_host>; |
| 504 |
status = "okay"; |
| 505 |
}; |
| 506 |
|
| 507 |
&usb2phy1_otg { |
| 508 |
phy-supply = <&vcc5v0_usb_host>; |
| 509 |
status = "okay"; |
| 510 |
}; |
| 511 |
|
| 512 |
&usb2phy1 { |
| 513 |
status = "okay"; |
| 514 |
}; |
| 515 |
|
| 516 |
&usb_host0_ehci { |
| 517 |
status = "okay"; |
| 518 |
}; |
| 519 |
|
| 520 |
&usb_host0_ohci { |
| 521 |
status = "okay"; |
| 522 |
}; |
| 523 |
|
| 524 |
&usb_host1_ehci { |
| 525 |
status = "okay"; |
| 526 |
}; |
| 527 |
|
| 528 |
&usb_host1_ohci { |
| 529 |
status = "okay"; |
| 530 |
}; |
| 531 |
|
| 532 |
&usb_host1_xhci { |
| 533 |
status = "okay"; |
| 534 |
}; |