| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/gpio/gpio.h> |
| 6 |
#include <dt-bindings/input/linux-event-codes.h> |
| 7 |
#include <dt-bindings/leds/common.h> |
| 8 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 9 |
#include <dt-bindings/soc/rockchip,vop2.h> |
| 10 |
#include "rk3566.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
chassis-type = "handset"; |
| 14 |
|
| 15 |
chosen: chosen { |
| 16 |
stdout-path = "serial2:1500000n8"; |
| 17 |
}; |
| 18 |
|
| 19 |
adc_keys: adc-keys { |
| 20 |
compatible = "adc-keys"; |
| 21 |
io-channels = <&saradc 0>; |
| 22 |
io-channel-names = "buttons"; |
| 23 |
keyup-threshold-microvolt = <1800000>; |
| 24 |
poll-interval = <60>; |
| 25 |
|
| 26 |
/* |
| 27 |
* Button is mapped to F key in BSP kernel, but |
| 28 |
* according to input guidelines it should be mode. |
| 29 |
*/ |
| 30 |
button-mode { |
| 31 |
label = "MODE"; |
| 32 |
linux,code = <BTN_MODE>; |
| 33 |
press-threshold-microvolt = <1750>; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
gpio_keys_control: gpio-keys-control { |
| 38 |
compatible = "gpio-keys"; |
| 39 |
pinctrl-0 = <&btn_pins_ctrl>; |
| 40 |
pinctrl-names = "default"; |
| 41 |
|
| 42 |
button-b { |
| 43 |
gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; |
| 44 |
label = "SOUTH"; |
| 45 |
linux,code = <BTN_SOUTH>; |
| 46 |
}; |
| 47 |
|
| 48 |
button-down { |
| 49 |
gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; |
| 50 |
label = "DPAD-DOWN"; |
| 51 |
linux,code = <BTN_DPAD_DOWN>; |
| 52 |
}; |
| 53 |
|
| 54 |
button-l1 { |
| 55 |
gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; |
| 56 |
label = "TL"; |
| 57 |
linux,code = <BTN_TL>; |
| 58 |
}; |
| 59 |
|
| 60 |
button-l2 { |
| 61 |
gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; |
| 62 |
label = "TL2"; |
| 63 |
linux,code = <BTN_TL2>; |
| 64 |
}; |
| 65 |
|
| 66 |
button-select { |
| 67 |
gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; |
| 68 |
label = "SELECT"; |
| 69 |
linux,code = <BTN_SELECT>; |
| 70 |
}; |
| 71 |
|
| 72 |
button-start { |
| 73 |
gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; |
| 74 |
label = "START"; |
| 75 |
linux,code = <BTN_START>; |
| 76 |
}; |
| 77 |
|
| 78 |
button-up { |
| 79 |
gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; |
| 80 |
label = "DPAD-UP"; |
| 81 |
linux,code = <BTN_DPAD_UP>; |
| 82 |
}; |
| 83 |
|
| 84 |
button-x { |
| 85 |
gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; |
| 86 |
label = "NORTH"; |
| 87 |
linux,code = <BTN_NORTH>; |
| 88 |
}; |
| 89 |
}; |
| 90 |
|
| 91 |
gpio_keys_vol: gpio-keys-vol { |
| 92 |
compatible = "gpio-keys"; |
| 93 |
autorepeat; |
| 94 |
pinctrl-0 = <&btn_pins_vol>; |
| 95 |
pinctrl-names = "default"; |
| 96 |
|
| 97 |
button-vol-down { |
| 98 |
gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; |
| 99 |
label = "VOLUMEDOWN"; |
| 100 |
linux,code = <KEY_VOLUMEDOWN>; |
| 101 |
}; |
| 102 |
|
| 103 |
button-vol-up { |
| 104 |
gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; |
| 105 |
label = "VOLUMEUP"; |
| 106 |
linux,code = <KEY_VOLUMEUP>; |
| 107 |
}; |
| 108 |
}; |
| 109 |
|
| 110 |
hdmi-con { |
| 111 |
compatible = "hdmi-connector"; |
| 112 |
ddc-i2c-bus = <&i2c5>; |
| 113 |
type = "c"; |
| 114 |
|
| 115 |
port { |
| 116 |
hdmi_con_in: endpoint { |
| 117 |
remote-endpoint = <&hdmi_out_con>; |
| 118 |
}; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
leds: pwm-leds { |
| 123 |
compatible = "pwm-leds"; |
| 124 |
|
| 125 |
green_led: led-0 { |
| 126 |
color = <LED_COLOR_ID_GREEN>; |
| 127 |
default-state = "on"; |
| 128 |
function = LED_FUNCTION_POWER; |
| 129 |
max-brightness = <255>; |
| 130 |
pwms = <&pwm6 0 25000 0>; |
| 131 |
}; |
| 132 |
|
| 133 |
amber_led: led-1 { |
| 134 |
color = <LED_COLOR_ID_AMBER>; |
| 135 |
function = LED_FUNCTION_CHARGING; |
| 136 |
max-brightness = <255>; |
| 137 |
pwms = <&pwm7 0 25000 0>; |
| 138 |
}; |
| 139 |
|
| 140 |
red_led: led-2 { |
| 141 |
color = <LED_COLOR_ID_RED>; |
| 142 |
default-state = "off"; |
| 143 |
function = LED_FUNCTION_STATUS; |
| 144 |
max-brightness = <255>; |
| 145 |
pwms = <&pwm0 0 25000 0>; |
| 146 |
}; |
| 147 |
}; |
| 148 |
|
| 149 |
sdio_pwrseq: sdio-pwrseq { |
| 150 |
compatible = "mmc-pwrseq-simple"; |
| 151 |
clocks = <&rk817 1>; |
| 152 |
clock-names = "ext_clock"; |
| 153 |
pinctrl-0 = <&wifi_enable_h>; |
| 154 |
pinctrl-names = "default"; |
| 155 |
post-power-on-delay-ms = <200>; |
| 156 |
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; |
| 157 |
}; |
| 158 |
|
| 159 |
vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 { |
| 160 |
compatible = "regulator-fixed"; |
| 161 |
gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; |
| 162 |
enable-active-high; |
| 163 |
pinctrl-0 = <&vcc_lcd_h>; |
| 164 |
pinctrl-names = "default"; |
| 165 |
regulator-boot-on; |
| 166 |
regulator-min-microvolt = <3300000>; |
| 167 |
regulator-max-microvolt = <3300000>; |
| 168 |
regulator-name = "vcc3v3_lcd0_n"; |
| 169 |
vin-supply = <&vcc_3v3>; |
| 170 |
regulator-state-mem { |
| 171 |
regulator-off-in-suspend; |
| 172 |
}; |
| 173 |
}; |
| 174 |
|
| 175 |
vcc_sys: regulator-vcc-sys { |
| 176 |
compatible = "regulator-fixed"; |
| 177 |
regulator-always-on; |
| 178 |
regulator-boot-on; |
| 179 |
regulator-min-microvolt = <3800000>; |
| 180 |
regulator-max-microvolt = <3800000>; |
| 181 |
regulator-name = "vcc_sys"; |
| 182 |
}; |
| 183 |
|
| 184 |
vcc_wifi: regulator-vcc-wifi { |
| 185 |
compatible = "regulator-fixed"; |
| 186 |
enable-active-high; |
| 187 |
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; |
| 188 |
pinctrl-0 = <&vcc_wifi_h>; |
| 189 |
pinctrl-names = "default"; |
| 190 |
regulator-always-on; |
| 191 |
regulator-boot-on; |
| 192 |
regulator-min-microvolt = <3300000>; |
| 193 |
regulator-max-microvolt = <3300000>; |
| 194 |
regulator-name = "vcc_wifi"; |
| 195 |
}; |
| 196 |
|
| 197 |
vibrator: pwm-vibrator { |
| 198 |
compatible = "pwm-vibrator"; |
| 199 |
pwm-names = "enable"; |
| 200 |
pwms = <&pwm5 0 1000000000 0>; |
| 201 |
}; |
| 202 |
}; |
| 203 |
|
| 204 |
&combphy1 { |
| 205 |
status = "okay"; |
| 206 |
}; |
| 207 |
|
| 208 |
&cpu0 { |
| 209 |
cpu-supply = <&vdd_cpu>; |
| 210 |
}; |
| 211 |
|
| 212 |
&cpu1 { |
| 213 |
cpu-supply = <&vdd_cpu>; |
| 214 |
}; |
| 215 |
|
| 216 |
&cpu2 { |
| 217 |
cpu-supply = <&vdd_cpu>; |
| 218 |
}; |
| 219 |
|
| 220 |
&cpu3 { |
| 221 |
cpu-supply = <&vdd_cpu>; |
| 222 |
}; |
| 223 |
|
| 224 |
&gpu { |
| 225 |
mali-supply = <&vdd_gpu>; |
| 226 |
status = "okay"; |
| 227 |
}; |
| 228 |
|
| 229 |
&hdmi { |
| 230 |
ddc-i2c-bus = <&i2c5>; |
| 231 |
pinctrl-0 = <&hdmitxm0_cec>; |
| 232 |
pinctrl-names = "default"; |
| 233 |
status = "okay"; |
| 234 |
}; |
| 235 |
|
| 236 |
&hdmi_in { |
| 237 |
hdmi_in_vp0: endpoint { |
| 238 |
remote-endpoint = <&vp0_out_hdmi>; |
| 239 |
}; |
| 240 |
}; |
| 241 |
|
| 242 |
&hdmi_out { |
| 243 |
hdmi_out_con: endpoint { |
| 244 |
remote-endpoint = <&hdmi_con_in>; |
| 245 |
}; |
| 246 |
}; |
| 247 |
|
| 248 |
&hdmi_sound { |
| 249 |
status = "okay"; |
| 250 |
}; |
| 251 |
|
| 252 |
&i2c0 { |
| 253 |
status = "okay"; |
| 254 |
|
| 255 |
rk817: pmic@20 { |
| 256 |
compatible = "rockchip,rk817"; |
| 257 |
reg = <0x20>; |
| 258 |
interrupt-parent = <&gpio0>; |
| 259 |
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; |
| 260 |
clock-output-names = "rk808-clkout1", "rk808-clkout2"; |
| 261 |
clock-names = "mclk"; |
| 262 |
clocks = <&cru I2S1_MCLKOUT_TX>; |
| 263 |
assigned-clocks = <&cru I2S1_MCLKOUT_TX>; |
| 264 |
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; |
| 265 |
#clock-cells = <1>; |
| 266 |
#sound-dai-cells = <0>; |
| 267 |
pinctrl-names = "default"; |
| 268 |
pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>; |
| 269 |
wakeup-source; |
| 270 |
|
| 271 |
vcc1-supply = <&vcc_sys>; |
| 272 |
vcc2-supply = <&vcc_sys>; |
| 273 |
vcc3-supply = <&vcc_sys>; |
| 274 |
vcc4-supply = <&vcc_sys>; |
| 275 |
vcc5-supply = <&vcc_sys>; |
| 276 |
vcc6-supply = <&vcc_sys>; |
| 277 |
vcc7-supply = <&vcc_sys>; |
| 278 |
vcc8-supply = <&vcc_sys>; |
| 279 |
vcc9-supply = <&dcdc_boost>; |
| 280 |
|
| 281 |
regulators { |
| 282 |
vdd_logic: DCDC_REG1 { |
| 283 |
regulator-always-on; |
| 284 |
regulator-boot-on; |
| 285 |
regulator-min-microvolt = <500000>; |
| 286 |
regulator-max-microvolt = <1350000>; |
| 287 |
regulator-ramp-delay = <6001>; |
| 288 |
regulator-initial-mode = <0x2>; |
| 289 |
regulator-name = "vdd_logic"; |
| 290 |
regulator-state-mem { |
| 291 |
regulator-off-in-suspend; |
| 292 |
regulator-suspend-microvolt = <900000>; |
| 293 |
}; |
| 294 |
}; |
| 295 |
|
| 296 |
vdd_gpu: DCDC_REG2 { |
| 297 |
regulator-always-on; |
| 298 |
regulator-boot-on; |
| 299 |
regulator-min-microvolt = <500000>; |
| 300 |
regulator-max-microvolt = <1350000>; |
| 301 |
regulator-ramp-delay = <6001>; |
| 302 |
regulator-initial-mode = <0x2>; |
| 303 |
regulator-name = "vdd_gpu"; |
| 304 |
regulator-state-mem { |
| 305 |
regulator-off-in-suspend; |
| 306 |
}; |
| 307 |
}; |
| 308 |
|
| 309 |
vcc_ddr: DCDC_REG3 { |
| 310 |
regulator-always-on; |
| 311 |
regulator-boot-on; |
| 312 |
regulator-initial-mode = <0x2>; |
| 313 |
regulator-name = "vcc_ddr"; |
| 314 |
regulator-state-mem { |
| 315 |
regulator-on-in-suspend; |
| 316 |
}; |
| 317 |
}; |
| 318 |
|
| 319 |
vcc_3v3: DCDC_REG4 { |
| 320 |
regulator-always-on; |
| 321 |
regulator-boot-on; |
| 322 |
regulator-min-microvolt = <3300000>; |
| 323 |
regulator-max-microvolt = <3300000>; |
| 324 |
regulator-initial-mode = <0x2>; |
| 325 |
regulator-name = "vcc_3v3"; |
| 326 |
regulator-state-mem { |
| 327 |
regulator-on-in-suspend; |
| 328 |
regulator-suspend-microvolt = <3300000>; |
| 329 |
}; |
| 330 |
}; |
| 331 |
|
| 332 |
vcca1v8_pmu: LDO_REG1 { |
| 333 |
regulator-always-on; |
| 334 |
regulator-boot-on; |
| 335 |
regulator-min-microvolt = <1800000>; |
| 336 |
regulator-max-microvolt = <1800000>; |
| 337 |
regulator-name = "vcca1v8_pmu"; |
| 338 |
regulator-state-mem { |
| 339 |
regulator-on-in-suspend; |
| 340 |
regulator-suspend-microvolt = <1800000>; |
| 341 |
}; |
| 342 |
}; |
| 343 |
|
| 344 |
vdda_0v9: LDO_REG2 { |
| 345 |
regulator-always-on; |
| 346 |
regulator-boot-on; |
| 347 |
regulator-min-microvolt = <900000>; |
| 348 |
regulator-max-microvolt = <900000>; |
| 349 |
regulator-name = "vdda_0v9"; |
| 350 |
regulator-state-mem { |
| 351 |
regulator-off-in-suspend; |
| 352 |
}; |
| 353 |
}; |
| 354 |
|
| 355 |
vdda0v9_pmu: LDO_REG3 { |
| 356 |
regulator-always-on; |
| 357 |
regulator-boot-on; |
| 358 |
regulator-min-microvolt = <900000>; |
| 359 |
regulator-max-microvolt = <900000>; |
| 360 |
regulator-name = "vdda0v9_pmu"; |
| 361 |
regulator-state-mem { |
| 362 |
regulator-on-in-suspend; |
| 363 |
regulator-suspend-microvolt = <900000>; |
| 364 |
}; |
| 365 |
}; |
| 366 |
|
| 367 |
vccio_acodec: LDO_REG4 { |
| 368 |
regulator-always-on; |
| 369 |
regulator-boot-on; |
| 370 |
regulator-min-microvolt = <3300000>; |
| 371 |
regulator-max-microvolt = <3300000>; |
| 372 |
regulator-name = "vccio_acodec"; |
| 373 |
regulator-state-mem { |
| 374 |
regulator-off-in-suspend; |
| 375 |
}; |
| 376 |
}; |
| 377 |
|
| 378 |
vccio_sd: LDO_REG5 { |
| 379 |
regulator-always-on; |
| 380 |
regulator-boot-on; |
| 381 |
regulator-min-microvolt = <1800000>; |
| 382 |
regulator-max-microvolt = <3300000>; |
| 383 |
regulator-name = "vccio_sd"; |
| 384 |
regulator-state-mem { |
| 385 |
regulator-off-in-suspend; |
| 386 |
}; |
| 387 |
}; |
| 388 |
|
| 389 |
vcc3v3_pmu: LDO_REG6 { |
| 390 |
regulator-always-on; |
| 391 |
regulator-boot-on; |
| 392 |
regulator-min-microvolt = <3300000>; |
| 393 |
regulator-max-microvolt = <3300000>; |
| 394 |
regulator-name = "vcc3v3_pmu"; |
| 395 |
regulator-state-mem { |
| 396 |
regulator-on-in-suspend; |
| 397 |
regulator-suspend-microvolt = <3300000>; |
| 398 |
}; |
| 399 |
}; |
| 400 |
|
| 401 |
vcc_1v8: LDO_REG7 { |
| 402 |
regulator-always-on; |
| 403 |
regulator-boot-on; |
| 404 |
regulator-min-microvolt = <1800000>; |
| 405 |
regulator-max-microvolt = <1800000>; |
| 406 |
regulator-name = "vcc_1v8"; |
| 407 |
regulator-state-mem { |
| 408 |
regulator-off-in-suspend; |
| 409 |
}; |
| 410 |
}; |
| 411 |
|
| 412 |
vcc1v8_dvp: LDO_REG8 { |
| 413 |
regulator-always-on; |
| 414 |
regulator-boot-on; |
| 415 |
regulator-min-microvolt = <1800000>; |
| 416 |
regulator-max-microvolt = <3300000>; |
| 417 |
regulator-name = "vcc1v8_dvp"; |
| 418 |
regulator-state-mem { |
| 419 |
regulator-off-in-suspend; |
| 420 |
}; |
| 421 |
}; |
| 422 |
|
| 423 |
vcc2v8_dvp: LDO_REG9 { |
| 424 |
regulator-always-on; |
| 425 |
regulator-boot-on; |
| 426 |
regulator-min-microvolt = <2800000>; |
| 427 |
regulator-max-microvolt = <2800000>; |
| 428 |
regulator-name = "vcc2v8_dvp"; |
| 429 |
regulator-state-mem { |
| 430 |
regulator-off-in-suspend; |
| 431 |
}; |
| 432 |
}; |
| 433 |
|
| 434 |
dcdc_boost: BOOST { |
| 435 |
regulator-always-on; |
| 436 |
regulator-boot-on; |
| 437 |
regulator-min-microvolt = <4700000>; |
| 438 |
regulator-max-microvolt = <5400000>; |
| 439 |
regulator-name = "boost"; |
| 440 |
regulator-state-mem { |
| 441 |
regulator-off-in-suspend; |
| 442 |
}; |
| 443 |
}; |
| 444 |
|
| 445 |
otg_switch: OTG_SWITCH { |
| 446 |
regulator-name = "otg_switch"; |
| 447 |
regulator-state-mem { |
| 448 |
regulator-off-in-suspend; |
| 449 |
}; |
| 450 |
}; |
| 451 |
}; |
| 452 |
}; |
| 453 |
|
| 454 |
vdd_cpu: regulator@40 { |
| 455 |
compatible = "fcs,fan53555"; |
| 456 |
reg = <0x40>; |
| 457 |
fcs,suspend-voltage-selector = <1>; |
| 458 |
regulator-always-on; |
| 459 |
regulator-boot-on; |
| 460 |
regulator-min-microvolt = <712500>; |
| 461 |
regulator-max-microvolt = <1390000>; |
| 462 |
regulator-name = "vdd_cpu"; |
| 463 |
regulator-ramp-delay = <2300>; |
| 464 |
vin-supply = <&vcc_sys>; |
| 465 |
regulator-state-mem { |
| 466 |
regulator-off-in-suspend; |
| 467 |
}; |
| 468 |
}; |
| 469 |
}; |
| 470 |
|
| 471 |
&i2c1 { |
| 472 |
/* Unused iSmartWare SW2001 encryption device at 0x3c */ |
| 473 |
status = "disabled"; |
| 474 |
}; |
| 475 |
|
| 476 |
&i2c5 { |
| 477 |
pinctrl-0 = <&i2c5m1_xfer>; |
| 478 |
pinctrl-names = "default"; |
| 479 |
status = "okay"; |
| 480 |
}; |
| 481 |
|
| 482 |
&i2s0_8ch { |
| 483 |
status = "okay"; |
| 484 |
}; |
| 485 |
|
| 486 |
&i2s1_8ch { |
| 487 |
pinctrl-0 = <&i2s1m0_sclktx |
| 488 |
&i2s1m0_lrcktx |
| 489 |
&i2s1m0_sdi0 |
| 490 |
&i2s1m0_sdo0>; |
| 491 |
pinctrl-names = "default"; |
| 492 |
rockchip,trcm-sync-tx-only; |
| 493 |
status = "okay"; |
| 494 |
}; |
| 495 |
|
| 496 |
&pinctrl { |
| 497 |
gpio-btns { |
| 498 |
btn_pins_ctrl: btn-pins-ctrl { |
| 499 |
rockchip,pins = |
| 500 |
<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, |
| 501 |
<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, |
| 502 |
<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, |
| 503 |
<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, |
| 504 |
<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, |
| 505 |
<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, |
| 506 |
<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, |
| 507 |
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, |
| 508 |
<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, |
| 509 |
<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, |
| 510 |
<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, |
| 511 |
<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, |
| 512 |
<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>, |
| 513 |
<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, |
| 514 |
<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>, |
| 515 |
<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 516 |
}; |
| 517 |
|
| 518 |
btn_pins_vol: btn-pins-vol { |
| 519 |
rockchip,pins = |
| 520 |
<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, |
| 521 |
<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 522 |
}; |
| 523 |
}; |
| 524 |
|
| 525 |
joy-mux { |
| 526 |
joy_mux_en: joy-mux-en { |
| 527 |
rockchip,pins = |
| 528 |
<0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>; |
| 529 |
}; |
| 530 |
}; |
| 531 |
|
| 532 |
pmic { |
| 533 |
pmic_int_l: pmic-int-l { |
| 534 |
rockchip,pins = |
| 535 |
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 536 |
}; |
| 537 |
}; |
| 538 |
|
| 539 |
sdio-pwrseq { |
| 540 |
wifi_enable_h: wifi-enable-h { |
| 541 |
rockchip,pins = |
| 542 |
<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 543 |
}; |
| 544 |
}; |
| 545 |
|
| 546 |
vcc3v3-lcd { |
| 547 |
vcc_lcd_h: vcc-lcd-h { |
| 548 |
rockchip,pins = |
| 549 |
<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 550 |
}; |
| 551 |
}; |
| 552 |
|
| 553 |
vcc-wifi { |
| 554 |
vcc_wifi_h: vcc-wifi-h { |
| 555 |
rockchip,pins = |
| 556 |
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 557 |
}; |
| 558 |
}; |
| 559 |
}; |
| 560 |
|
| 561 |
&pmu_io_domains { |
| 562 |
status = "okay"; |
| 563 |
pmuio1-supply = <&vcc3v3_pmu>; |
| 564 |
pmuio2-supply = <&vcc3v3_pmu>; |
| 565 |
vccio1-supply = <&vccio_acodec>; |
| 566 |
vccio3-supply = <&vccio_sd>; |
| 567 |
vccio4-supply = <&vcc_1v8>; |
| 568 |
vccio5-supply = <&vcc_3v3>; |
| 569 |
vccio6-supply = <&vcc1v8_dvp>; |
| 570 |
vccio7-supply = <&vcc_3v3>; |
| 571 |
}; |
| 572 |
|
| 573 |
&pwm0 { |
| 574 |
pinctrl-0 = <&pwm0m1_pins>; |
| 575 |
pinctrl-names = "default"; |
| 576 |
status = "okay"; |
| 577 |
}; |
| 578 |
|
| 579 |
&pwm5 { |
| 580 |
status = "okay"; |
| 581 |
}; |
| 582 |
|
| 583 |
&pwm6 { |
| 584 |
status = "okay"; |
| 585 |
}; |
| 586 |
|
| 587 |
&pwm7 { |
| 588 |
status = "okay"; |
| 589 |
}; |
| 590 |
|
| 591 |
&saradc { |
| 592 |
vref-supply = <&vcc_1v8>; |
| 593 |
status = "okay"; |
| 594 |
}; |
| 595 |
|
| 596 |
&sdmmc0 { |
| 597 |
bus-width = <4>; |
| 598 |
cap-sd-highspeed; |
| 599 |
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 600 |
disable-wp; |
| 601 |
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; |
| 602 |
pinctrl-names = "default"; |
| 603 |
sd-uhs-sdr104; |
| 604 |
vmmc-supply = <&vcc_3v3>; |
| 605 |
vqmmc-supply = <&vccio_sd>; |
| 606 |
status = "okay"; |
| 607 |
}; |
| 608 |
|
| 609 |
&sdmmc1 { |
| 610 |
bus-width = <4>; |
| 611 |
cap-sd-highspeed; |
| 612 |
cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; |
| 613 |
disable-wp; |
| 614 |
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>; |
| 615 |
pinctrl-names = "default"; |
| 616 |
sd-uhs-sdr104; |
| 617 |
vmmc-supply = <&vcc_3v3>; |
| 618 |
vqmmc-supply = <&vcc1v8_dvp>; |
| 619 |
status = "okay"; |
| 620 |
}; |
| 621 |
|
| 622 |
&sdmmc2 { |
| 623 |
bus-width = <4>; |
| 624 |
cap-sd-highspeed; |
| 625 |
cap-sdio-irq; |
| 626 |
keep-power-in-suspend; |
| 627 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 628 |
no-mmc; |
| 629 |
no-sd; |
| 630 |
non-removable; |
| 631 |
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; |
| 632 |
pinctrl-names = "default"; |
| 633 |
sd-uhs-sdr50; |
| 634 |
vmmc-supply = <&vcc_wifi>; |
| 635 |
vqmmc-supply = <&vcca1v8_pmu>; |
| 636 |
status = "okay"; |
| 637 |
}; |
| 638 |
|
| 639 |
&tsadc { |
| 640 |
rockchip,hw-tshut-mode = <1>; |
| 641 |
rockchip,hw-tshut-polarity = <0>; |
| 642 |
status = "okay"; |
| 643 |
}; |
| 644 |
|
| 645 |
&uart1 { |
| 646 |
pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>; |
| 647 |
pinctrl-names = "default"; |
| 648 |
uart-has-rtscts; |
| 649 |
status = "okay"; |
| 650 |
|
| 651 |
bluetooth { |
| 652 |
compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; |
| 653 |
device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; |
| 654 |
enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; |
| 655 |
host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; |
| 656 |
}; |
| 657 |
}; |
| 658 |
|
| 659 |
&uart2 { |
| 660 |
status = "okay"; |
| 661 |
}; |
| 662 |
|
| 663 |
/* |
| 664 |
* Lack the schematics to verify, but port works as a peripheral |
| 665 |
* (and not a host or OTG port). |
| 666 |
*/ |
| 667 |
&usb_host0_xhci { |
| 668 |
dr_mode = "peripheral"; |
| 669 |
phys = <&usb2phy0_otg>; |
| 670 |
phy-names = "usb2-phy"; |
| 671 |
status = "okay"; |
| 672 |
}; |
| 673 |
|
| 674 |
&usb_host1_ehci { |
| 675 |
status = "okay"; |
| 676 |
}; |
| 677 |
|
| 678 |
&usb_host1_ohci { |
| 679 |
status = "okay"; |
| 680 |
}; |
| 681 |
|
| 682 |
&usb_host1_xhci { |
| 683 |
phy-names = "usb2-phy", "usb3-phy"; |
| 684 |
phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>; |
| 685 |
status = "okay"; |
| 686 |
}; |
| 687 |
|
| 688 |
&usb2phy0 { |
| 689 |
status = "okay"; |
| 690 |
}; |
| 691 |
|
| 692 |
&usb2phy0_otg { |
| 693 |
status = "okay"; |
| 694 |
}; |
| 695 |
|
| 696 |
&usb2phy1 { |
| 697 |
status = "okay"; |
| 698 |
}; |
| 699 |
|
| 700 |
&usb2phy1_host { |
| 701 |
status = "okay"; |
| 702 |
}; |
| 703 |
|
| 704 |
&vop { |
| 705 |
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| 706 |
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 707 |
status = "okay"; |
| 708 |
}; |
| 709 |
|
| 710 |
&vop_mmu { |
| 711 |
status = "okay"; |
| 712 |
}; |
| 713 |
|
| 714 |
&vp0 { |
| 715 |
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 716 |
reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 717 |
remote-endpoint = <&hdmi_in_vp0>; |
| 718 |
}; |
| 719 |
}; |