| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/gpio/gpio.h> |
| 6 |
#include <dt-bindings/input/linux-event-codes.h> |
| 7 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 8 |
#include "rk3566-anbernic-rgxx3.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Anbernic RG503"; |
| 12 |
compatible = "anbernic,rg503", "rockchip,rk3566"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
mmc0 = &sdmmc0; |
| 16 |
mmc1 = &sdmmc1; |
| 17 |
mmc2 = &sdmmc2; |
| 18 |
}; |
| 19 |
|
| 20 |
adc-joystick { |
| 21 |
compatible = "adc-joystick"; |
| 22 |
io-channels = <&adc_mux 0>, |
| 23 |
<&adc_mux 1>, |
| 24 |
<&adc_mux 2>, |
| 25 |
<&adc_mux 3>; |
| 26 |
pinctrl-0 = <&joy_mux_en>; |
| 27 |
pinctrl-names = "default"; |
| 28 |
poll-interval = <60>; |
| 29 |
#address-cells = <1>; |
| 30 |
#size-cells = <0>; |
| 31 |
|
| 32 |
axis@0 { |
| 33 |
reg = <0>; |
| 34 |
abs-flat = <32>; |
| 35 |
abs-fuzz = <32>; |
| 36 |
abs-range = <1023 15>; |
| 37 |
linux,code = <ABS_X>; |
| 38 |
}; |
| 39 |
|
| 40 |
axis@1 { |
| 41 |
reg = <1>; |
| 42 |
abs-flat = <32>; |
| 43 |
abs-fuzz = <32>; |
| 44 |
abs-range = <15 1023>; |
| 45 |
linux,code = <ABS_RX>; |
| 46 |
}; |
| 47 |
|
| 48 |
axis@2 { |
| 49 |
reg = <2>; |
| 50 |
abs-flat = <32>; |
| 51 |
abs-fuzz = <32>; |
| 52 |
abs-range = <15 1023>; |
| 53 |
linux,code = <ABS_Y>; |
| 54 |
}; |
| 55 |
|
| 56 |
axis@3 { |
| 57 |
reg = <3>; |
| 58 |
abs-flat = <32>; |
| 59 |
abs-fuzz = <32>; |
| 60 |
abs-range = <1023 15>; |
| 61 |
linux,code = <ABS_RY>; |
| 62 |
}; |
| 63 |
}; |
| 64 |
|
| 65 |
adc_mux: adc-mux { |
| 66 |
compatible = "io-channel-mux"; |
| 67 |
channels = "left_x", "right_x", "left_y", "right_y"; |
| 68 |
#io-channel-cells = <1>; |
| 69 |
io-channels = <&saradc 3>; |
| 70 |
io-channel-names = "parent"; |
| 71 |
mux-controls = <&gpio_mux>; |
| 72 |
settle-time-us = <100>; |
| 73 |
}; |
| 74 |
|
| 75 |
battery: battery { |
| 76 |
compatible = "simple-battery"; |
| 77 |
charge-full-design-microamp-hours = <3472000>; |
| 78 |
charge-term-current-microamp = <300000>; |
| 79 |
constant-charge-current-max-microamp = <2000000>; |
| 80 |
constant-charge-voltage-max-microvolt = <4200000>; |
| 81 |
factory-internal-resistance-micro-ohms = <117000>; |
| 82 |
voltage-max-design-microvolt = <4172000>; |
| 83 |
voltage-min-design-microvolt = <3400000>; |
| 84 |
|
| 85 |
ocv-capacity-celsius = <20>; |
| 86 |
ocv-capacity-table-0 = <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>, |
| 87 |
<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>, |
| 88 |
<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>, |
| 89 |
<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>, |
| 90 |
<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>, |
| 91 |
<3400000 0>; |
| 92 |
}; |
| 93 |
|
| 94 |
gpio_mux: mux-controller { |
| 95 |
compatible = "gpio-mux"; |
| 96 |
mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, |
| 97 |
<&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; |
| 98 |
#mux-control-cells = <0>; |
| 99 |
}; |
| 100 |
|
| 101 |
gpio_spi: spi { |
| 102 |
compatible = "spi-gpio"; |
| 103 |
pinctrl-names = "default"; |
| 104 |
pinctrl-0 = <&spi_pins>; |
| 105 |
#address-cells = <1>; |
| 106 |
#size-cells = <0>; |
| 107 |
|
| 108 |
sck-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; |
| 109 |
mosi-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; |
| 110 |
cs-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; |
| 111 |
num-chipselects = <0>; |
| 112 |
|
| 113 |
panel@0 { |
| 114 |
compatible = "samsung,ams495qa01"; |
| 115 |
reg = <0>; |
| 116 |
pinctrl-names = "default"; |
| 117 |
pinctrl-0 = <&lcd_reset>; |
| 118 |
reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; |
| 119 |
vdd-supply = <&vcc_3v3>; |
| 120 |
|
| 121 |
port { |
| 122 |
mipi_in_panel: endpoint { |
| 123 |
remote-endpoint = <&mipi_out_panel>; |
| 124 |
}; |
| 125 |
}; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
/* Channels reversed for both headphones and speakers. */ |
| 130 |
sound { |
| 131 |
compatible = "simple-audio-card"; |
| 132 |
simple-audio-card,name = "rk817_ext"; |
| 133 |
simple-audio-card,aux-devs = <&spk_amp>; |
| 134 |
simple-audio-card,format = "i2s"; |
| 135 |
simple-audio-card,hp-det-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; |
| 136 |
simple-audio-card,mclk-fs = <256>; |
| 137 |
simple-audio-card,widgets = |
| 138 |
"Microphone", "Mic Jack", |
| 139 |
"Headphone", "Headphones", |
| 140 |
"Speaker", "Internal Speakers"; |
| 141 |
simple-audio-card,routing = |
| 142 |
"MICL", "Mic Jack", |
| 143 |
"Headphones", "HPOL", |
| 144 |
"Headphones", "HPOR", |
| 145 |
"Internal Speakers", "Speaker Amp OUTL", |
| 146 |
"Internal Speakers", "Speaker Amp OUTR", |
| 147 |
"Speaker Amp INL", "HPOL", |
| 148 |
"Speaker Amp INR", "HPOR"; |
| 149 |
simple-audio-card,pin-switches = "Internal Speakers"; |
| 150 |
|
| 151 |
simple-audio-card,codec { |
| 152 |
sound-dai = <&rk817>; |
| 153 |
}; |
| 154 |
|
| 155 |
simple-audio-card,cpu { |
| 156 |
sound-dai = <&i2s1_8ch>; |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
spk_amp: audio-amplifier { |
| 161 |
compatible = "simple-audio-amplifier"; |
| 162 |
enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; |
| 163 |
pinctrl-0 = <&spk_amp_enable_h>; |
| 164 |
pinctrl-names = "default"; |
| 165 |
sound-name-prefix = "Speaker Amp"; |
| 166 |
}; |
| 167 |
}; |
| 168 |
|
| 169 |
&cru { |
| 170 |
assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, |
| 171 |
<&pmucru PLL_PPLL>, <&cru PLL_VPLL>; |
| 172 |
assigned-clock-rates = <32768>, <1200000000>, |
| 173 |
<200000000>, <500000000>; |
| 174 |
}; |
| 175 |
|
| 176 |
&dsi_dphy0 { |
| 177 |
status = "okay"; |
| 178 |
}; |
| 179 |
|
| 180 |
&dsi0 { |
| 181 |
status = "okay"; |
| 182 |
|
| 183 |
ports { |
| 184 |
dsi0_in: port@0 { |
| 185 |
reg = <0>; |
| 186 |
|
| 187 |
dsi0_in_vp1: endpoint { |
| 188 |
remote-endpoint = <&vp1_out_dsi0>; |
| 189 |
}; |
| 190 |
}; |
| 191 |
|
| 192 |
dsi0_out: port@1 { |
| 193 |
reg = <1>; |
| 194 |
|
| 195 |
mipi_out_panel: endpoint { |
| 196 |
remote-endpoint = <&mipi_in_panel>; |
| 197 |
}; |
| 198 |
}; |
| 199 |
}; |
| 200 |
}; |
| 201 |
|
| 202 |
&gpio_keys_control { |
| 203 |
button-a { |
| 204 |
gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; |
| 205 |
label = "EAST"; |
| 206 |
linux,code = <BTN_EAST>; |
| 207 |
}; |
| 208 |
|
| 209 |
button-left { |
| 210 |
gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; |
| 211 |
label = "DPAD-LEFT"; |
| 212 |
linux,code = <BTN_DPAD_LEFT>; |
| 213 |
}; |
| 214 |
|
| 215 |
button-right { |
| 216 |
gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; |
| 217 |
label = "DPAD-RIGHT"; |
| 218 |
linux,code = <BTN_DPAD_RIGHT>; |
| 219 |
}; |
| 220 |
|
| 221 |
button-r1 { |
| 222 |
gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; |
| 223 |
label = "TR"; |
| 224 |
linux,code = <BTN_TR>; |
| 225 |
}; |
| 226 |
|
| 227 |
button-r2 { |
| 228 |
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; |
| 229 |
label = "TR2"; |
| 230 |
linux,code = <BTN_TR2>; |
| 231 |
}; |
| 232 |
|
| 233 |
button-right { |
| 234 |
gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; |
| 235 |
label = "DPAD-RIGHT"; |
| 236 |
linux,code = <BTN_DPAD_RIGHT>; |
| 237 |
}; |
| 238 |
|
| 239 |
button-thumbl { |
| 240 |
gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; |
| 241 |
label = "THUMBL"; |
| 242 |
linux,code = <BTN_THUMBL>; |
| 243 |
}; |
| 244 |
|
| 245 |
button-thumbr { |
| 246 |
gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; |
| 247 |
label = "THUMBR"; |
| 248 |
linux,code = <BTN_THUMBR>; |
| 249 |
}; |
| 250 |
|
| 251 |
button-y { |
| 252 |
gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; |
| 253 |
label = "WEST"; |
| 254 |
linux,code = <BTN_WEST>; |
| 255 |
}; |
| 256 |
}; |
| 257 |
|
| 258 |
&pinctrl { |
| 259 |
audio-amplifier { |
| 260 |
spk_amp_enable_h: spk-amp-enable-h { |
| 261 |
rockchip,pins = |
| 262 |
<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 263 |
}; |
| 264 |
}; |
| 265 |
|
| 266 |
gpio-lcd { |
| 267 |
lcd_reset: lcd-reset { |
| 268 |
rockchip,pins = |
| 269 |
<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 270 |
}; |
| 271 |
}; |
| 272 |
|
| 273 |
gpio-spi { |
| 274 |
spi_pins: spi-pins { |
| 275 |
rockchip,pins = |
| 276 |
<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>, |
| 277 |
<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>, |
| 278 |
<4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 279 |
}; |
| 280 |
}; |
| 281 |
}; |
| 282 |
|
| 283 |
&rk817 { |
| 284 |
rk817_charger: charger { |
| 285 |
monitored-battery = <&battery>; |
| 286 |
rockchip,resistor-sense-micro-ohms = <10000>; |
| 287 |
rockchip,sleep-enter-current-microamp = <300000>; |
| 288 |
rockchip,sleep-filter-current-microamp = <100000>; |
| 289 |
}; |
| 290 |
}; |
| 291 |
|
| 292 |
&vp1 { |
| 293 |
vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { |
| 294 |
reg = <ROCKCHIP_VOP2_EP_MIPI0>; |
| 295 |
remote-endpoint = <&dsi0_in_vp1>; |
| 296 |
}; |
| 297 |
}; |