| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2024-2025 Rockchip Electronics Co., Ltd. |
| 4 |
* |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
#include <dt-bindings/leds/common.h> |
| 12 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 13 |
#include "rk3562.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Rockchip RK3562 EVB V20 Board"; |
| 17 |
compatible = "rockchip,rk3562-evb2-v10", "rockchip,rk3562"; |
| 18 |
|
| 19 |
chosen: chosen { |
| 20 |
stdout-path = "serial0:1500000n8"; |
| 21 |
}; |
| 22 |
|
| 23 |
adc_keys: adc-keys { |
| 24 |
compatible = "adc-keys"; |
| 25 |
io-channels = <&saradc0 1>; |
| 26 |
io-channel-names = "buttons"; |
| 27 |
keyup-threshold-microvolt = <1800000>; |
| 28 |
poll-interval = <100>; |
| 29 |
|
| 30 |
button-vol-up { |
| 31 |
linux,code = <KEY_VOLUMEUP>; |
| 32 |
label = "volume up"; |
| 33 |
press-threshold-microvolt = <17000>; |
| 34 |
}; |
| 35 |
|
| 36 |
button-vol-down { |
| 37 |
linux,code = <KEY_VOLUMEDOWN>; |
| 38 |
label = "volume down"; |
| 39 |
press-threshold-microvolt = <414000>; |
| 40 |
}; |
| 41 |
|
| 42 |
button-menu { |
| 43 |
linux,code = <KEY_MENU>; |
| 44 |
label = "menu"; |
| 45 |
press-threshold-microvolt = <800000>; |
| 46 |
}; |
| 47 |
|
| 48 |
button-back { |
| 49 |
linux,code = <KEY_BACK>; |
| 50 |
label = "back"; |
| 51 |
press-threshold-microvolt = <1200000>; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
leds: leds { |
| 56 |
compatible = "gpio-leds"; |
| 57 |
|
| 58 |
work_led: led-0 { |
| 59 |
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; |
| 60 |
linux,default-trigger = "heartbeat"; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
sdio_pwrseq: sdio-pwrseq { |
| 65 |
compatible = "mmc-pwrseq-simple"; |
| 66 |
clocks = <&rk809 1>; |
| 67 |
clock-names = "ext_clock"; |
| 68 |
pinctrl-names = "default"; |
| 69 |
pinctrl-0 = <&wifi_enable_h>; |
| 70 |
|
| 71 |
/* |
| 72 |
* On the module itself this is one of these (depending |
| 73 |
* on the actual card populated): |
| 74 |
* - SDIO_RESET_L_WL_REG_ON |
| 75 |
* - PDN (power down when low) |
| 76 |
*/ |
| 77 |
post-power-on-delay-ms = <200>; |
| 78 |
reset-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; |
| 79 |
}; |
| 80 |
|
| 81 |
vcc12v_dcin: regulator-vcc12v-dcin { |
| 82 |
compatible = "regulator-fixed"; |
| 83 |
regulator-name = "vcc12v_dcin"; |
| 84 |
regulator-always-on; |
| 85 |
regulator-boot-on; |
| 86 |
regulator-min-microvolt = <12000000>; |
| 87 |
regulator-max-microvolt = <12000000>; |
| 88 |
}; |
| 89 |
|
| 90 |
vcc3v3_pcie20: regulator-vcc3v3-pcie20 { |
| 91 |
compatible = "regulator-fixed"; |
| 92 |
regulator-name = "vcc3v3_pcie20"; |
| 93 |
regulator-min-microvolt = <3300000>; |
| 94 |
regulator-max-microvolt = <3300000>; |
| 95 |
enable-active-high; |
| 96 |
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 97 |
startup-delay-us = <5000>; |
| 98 |
vin-supply = <&vcc12v_dcin>; |
| 99 |
}; |
| 100 |
|
| 101 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 102 |
compatible = "regulator-fixed"; |
| 103 |
regulator-name = "vcc5v0_sys"; |
| 104 |
regulator-always-on; |
| 105 |
regulator-boot-on; |
| 106 |
regulator-min-microvolt = <5000000>; |
| 107 |
regulator-max-microvolt = <5000000>; |
| 108 |
vin-supply = <&vcc12v_dcin>; |
| 109 |
}; |
| 110 |
|
| 111 |
vcc5v0_usb: regulator-vcc5v0-usb { |
| 112 |
compatible = "regulator-fixed"; |
| 113 |
regulator-name = "vcc5v0_usb"; |
| 114 |
regulator-always-on; |
| 115 |
regulator-boot-on; |
| 116 |
regulator-min-microvolt = <5000000>; |
| 117 |
regulator-max-microvolt = <5000000>; |
| 118 |
vin-supply = <&vcc12v_dcin>; |
| 119 |
}; |
| 120 |
|
| 121 |
vcc5v0_usb_host: regulator-vcc5v0-usb-host { |
| 122 |
compatible = "regulator-fixed"; |
| 123 |
regulator-name = "vcc5v0_usb_host"; |
| 124 |
regulator-boot-on; |
| 125 |
regulator-always-on; |
| 126 |
regulator-min-microvolt = <5000000>; |
| 127 |
regulator-max-microvolt = <5000000>; |
| 128 |
enable-active-high; |
| 129 |
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; |
| 130 |
vin-supply = <&vcc5v0_usb>; |
| 131 |
pinctrl-names = "default"; |
| 132 |
pinctrl-0 = <&usb_host_pwren>; |
| 133 |
}; |
| 134 |
|
| 135 |
vcc5v0_usb_otg: regulator-vcc5v0-usb-otg { |
| 136 |
compatible = "regulator-fixed"; |
| 137 |
regulator-name = "vcc5v0_usb_otg"; |
| 138 |
regulator-min-microvolt = <5000000>; |
| 139 |
regulator-max-microvolt = <5000000>; |
| 140 |
enable-active-high; |
| 141 |
gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; |
| 142 |
vin-supply = <&vcc5v0_usb>; |
| 143 |
pinctrl-names = "default"; |
| 144 |
pinctrl-0 = <&usb_otg_pwren>; |
| 145 |
}; |
| 146 |
|
| 147 |
vcc3v3_clk: regulator-vcc3v3-clk { |
| 148 |
compatible = "regulator-fixed"; |
| 149 |
regulator-name = "vcc3v3_clk"; |
| 150 |
regulator-min-microvolt = <3300000>; |
| 151 |
regulator-max-microvolt = <3300000>; |
| 152 |
vin-supply = <&vcc5v0_sys>; |
| 153 |
}; |
| 154 |
|
| 155 |
vcc3v3_sys: regulator-vcc-sys { |
| 156 |
compatible = "regulator-fixed"; |
| 157 |
regulator-name = "vcc3v3_sys"; |
| 158 |
regulator-always-on; |
| 159 |
regulator-boot-on; |
| 160 |
regulator-min-microvolt = <3300000>; |
| 161 |
regulator-max-microvolt = <3300000>; |
| 162 |
vin-supply = <&vcc12v_dcin>; |
| 163 |
}; |
| 164 |
}; |
| 165 |
|
| 166 |
&combphy { |
| 167 |
status = "okay"; |
| 168 |
}; |
| 169 |
|
| 170 |
&i2c0 { |
| 171 |
status = "okay"; |
| 172 |
|
| 173 |
rk809: pmic@20 { |
| 174 |
compatible = "rockchip,rk809"; |
| 175 |
reg = <0x20>; |
| 176 |
interrupt-parent = <&gpio0>; |
| 177 |
interrupts = <3 IRQ_TYPE_LEVEL_LOW>; |
| 178 |
|
| 179 |
pinctrl-names = "default", "pmic-sleep", |
| 180 |
"pmic-power-off", "pmic-reset"; |
| 181 |
pinctrl-0 = <&pmic_int>; |
| 182 |
rockchip,system-power-controller; |
| 183 |
wakeup-source; |
| 184 |
#clock-cells = <1>; |
| 185 |
clock-output-names = "rk808-clkout1", "rk808-clkout2"; |
| 186 |
|
| 187 |
vcc1-supply = <&vcc3v3_sys>; |
| 188 |
vcc2-supply = <&vcc3v3_sys>; |
| 189 |
vcc3-supply = <&vcc3v3_sys>; |
| 190 |
vcc4-supply = <&vcc3v3_sys>; |
| 191 |
vcc5-supply = <&vcc3v3_sys>; |
| 192 |
vcc6-supply = <&vcc3v3_sys>; |
| 193 |
vcc7-supply = <&vcc3v3_sys>; |
| 194 |
vcc8-supply = <&vcc3v3_sys>; |
| 195 |
vcc9-supply = <&vcc3v3_sys>; |
| 196 |
|
| 197 |
regulators { |
| 198 |
vdd_logic: DCDC_REG1 { |
| 199 |
regulator-always-on; |
| 200 |
regulator-boot-on; |
| 201 |
regulator-min-microvolt = <500000>; |
| 202 |
regulator-max-microvolt = <1350000>; |
| 203 |
regulator-ramp-delay = <6001>; |
| 204 |
regulator-initial-mode = <0x2>; |
| 205 |
regulator-name = "vdd_logic"; |
| 206 |
regulator-state-mem { |
| 207 |
regulator-off-in-suspend; |
| 208 |
}; |
| 209 |
}; |
| 210 |
|
| 211 |
vdd_cpu: DCDC_REG2 { |
| 212 |
regulator-always-on; |
| 213 |
regulator-boot-on; |
| 214 |
regulator-min-microvolt = <500000>; |
| 215 |
regulator-max-microvolt = <1350000>; |
| 216 |
regulator-ramp-delay = <6001>; |
| 217 |
regulator-initial-mode = <0x2>; |
| 218 |
regulator-name = "vdd_cpu"; |
| 219 |
regulator-state-mem { |
| 220 |
regulator-off-in-suspend; |
| 221 |
}; |
| 222 |
}; |
| 223 |
|
| 224 |
vcc_ddr: DCDC_REG3 { |
| 225 |
regulator-always-on; |
| 226 |
regulator-boot-on; |
| 227 |
regulator-initial-mode = <0x2>; |
| 228 |
regulator-name = "vcc_ddr"; |
| 229 |
regulator-state-mem { |
| 230 |
regulator-on-in-suspend; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
vdd_gpu: DCDC_REG4 { |
| 235 |
regulator-always-on; |
| 236 |
regulator-boot-on; |
| 237 |
regulator-min-microvolt = <500000>; |
| 238 |
regulator-max-microvolt = <1350000>; |
| 239 |
regulator-ramp-delay = <6001>; |
| 240 |
regulator-initial-mode = <0x2>; |
| 241 |
regulator-name = "vdd_gpu"; |
| 242 |
regulator-state-mem { |
| 243 |
regulator-off-in-suspend; |
| 244 |
}; |
| 245 |
}; |
| 246 |
|
| 247 |
vcc2v8_dvp: LDO_REG1 { |
| 248 |
regulator-min-microvolt = <2800000>; |
| 249 |
regulator-max-microvolt = <2800000>; |
| 250 |
regulator-name = "vcc2v8_dvp"; |
| 251 |
regulator-state-mem { |
| 252 |
regulator-off-in-suspend; |
| 253 |
}; |
| 254 |
}; |
| 255 |
|
| 256 |
vdda_0v9: LDO_REG2 { |
| 257 |
regulator-always-on; |
| 258 |
regulator-boot-on; |
| 259 |
regulator-min-microvolt = <900000>; |
| 260 |
regulator-max-microvolt = <900000>; |
| 261 |
regulator-name = "vdda_0v9"; |
| 262 |
regulator-state-mem { |
| 263 |
regulator-off-in-suspend; |
| 264 |
}; |
| 265 |
}; |
| 266 |
|
| 267 |
vdda0v9_pmu: LDO_REG3 { |
| 268 |
regulator-always-on; |
| 269 |
regulator-boot-on; |
| 270 |
regulator-min-microvolt = <900000>; |
| 271 |
regulator-max-microvolt = <900000>; |
| 272 |
regulator-name = "vdda0v9_pmu"; |
| 273 |
regulator-state-mem { |
| 274 |
regulator-on-in-suspend; |
| 275 |
regulator-suspend-microvolt = <900000>; |
| 276 |
}; |
| 277 |
}; |
| 278 |
|
| 279 |
vccio_acodec: LDO_REG4 { |
| 280 |
regulator-always-on; |
| 281 |
regulator-boot-on; |
| 282 |
regulator-min-microvolt = <3000000>; |
| 283 |
regulator-max-microvolt = <3000000>; |
| 284 |
regulator-name = "vccio_acodec"; |
| 285 |
regulator-state-mem { |
| 286 |
regulator-off-in-suspend; |
| 287 |
}; |
| 288 |
}; |
| 289 |
|
| 290 |
vccio_sd: LDO_REG5 { |
| 291 |
regulator-always-on; |
| 292 |
regulator-boot-on; |
| 293 |
regulator-min-microvolt = <1800000>; |
| 294 |
regulator-max-microvolt = <3300000>; |
| 295 |
regulator-name = "vccio_sd"; |
| 296 |
regulator-state-mem { |
| 297 |
regulator-off-in-suspend; |
| 298 |
}; |
| 299 |
}; |
| 300 |
|
| 301 |
vcc3v3_pmu: LDO_REG6 { |
| 302 |
regulator-always-on; |
| 303 |
regulator-boot-on; |
| 304 |
regulator-min-microvolt = <3300000>; |
| 305 |
regulator-max-microvolt = <3300000>; |
| 306 |
regulator-name = "vcc3v3_pmu"; |
| 307 |
regulator-state-mem { |
| 308 |
regulator-on-in-suspend; |
| 309 |
regulator-suspend-microvolt = <3300000>; |
| 310 |
}; |
| 311 |
}; |
| 312 |
|
| 313 |
vcca_1v8: LDO_REG7 { |
| 314 |
regulator-always-on; |
| 315 |
regulator-boot-on; |
| 316 |
regulator-min-microvolt = <1800000>; |
| 317 |
regulator-max-microvolt = <1800000>; |
| 318 |
regulator-name = "vcca_1v8"; |
| 319 |
regulator-state-mem { |
| 320 |
regulator-off-in-suspend; |
| 321 |
}; |
| 322 |
}; |
| 323 |
|
| 324 |
vcca1v8_pmu: LDO_REG8 { |
| 325 |
regulator-always-on; |
| 326 |
regulator-boot-on; |
| 327 |
regulator-min-microvolt = <1800000>; |
| 328 |
regulator-max-microvolt = <1800000>; |
| 329 |
regulator-name = "vcca1v8_pmu"; |
| 330 |
regulator-state-mem { |
| 331 |
regulator-on-in-suspend; |
| 332 |
regulator-suspend-microvolt = <1800000>; |
| 333 |
}; |
| 334 |
}; |
| 335 |
|
| 336 |
vcc1v8_dvp: LDO_REG9 { |
| 337 |
regulator-min-microvolt = <1800000>; |
| 338 |
regulator-max-microvolt = <1800000>; |
| 339 |
regulator-name = "vcc1v8_dvp"; |
| 340 |
regulator-state-mem { |
| 341 |
regulator-off-in-suspend; |
| 342 |
}; |
| 343 |
}; |
| 344 |
|
| 345 |
vcc_1v8: DCDC_REG5 { |
| 346 |
regulator-always-on; |
| 347 |
regulator-boot-on; |
| 348 |
regulator-min-microvolt = <1800000>; |
| 349 |
regulator-max-microvolt = <1800000>; |
| 350 |
regulator-name = "vcc_1v8"; |
| 351 |
regulator-state-mem { |
| 352 |
regulator-off-in-suspend; |
| 353 |
}; |
| 354 |
}; |
| 355 |
|
| 356 |
vcc_3v3: SWITCH_REG1 { |
| 357 |
regulator-always-on; |
| 358 |
regulator-boot-on; |
| 359 |
regulator-name = "vcc_3v3"; |
| 360 |
regulator-state-mem { |
| 361 |
regulator-off-in-suspend; |
| 362 |
}; |
| 363 |
}; |
| 364 |
|
| 365 |
vcc3v3_sd: SWITCH_REG2 { |
| 366 |
regulator-always-on; |
| 367 |
regulator-boot-on; |
| 368 |
regulator-name = "vcc3v3_sd"; |
| 369 |
regulator-state-mem { |
| 370 |
regulator-off-in-suspend; |
| 371 |
}; |
| 372 |
}; |
| 373 |
}; |
| 374 |
}; |
| 375 |
}; |
| 376 |
|
| 377 |
&pcie2x1 { |
| 378 |
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; |
| 379 |
vpcie3v3-supply = <&vcc3v3_pcie20>; |
| 380 |
status = "okay"; |
| 381 |
}; |
| 382 |
|
| 383 |
&pinctrl { |
| 384 |
sdio-pwrseq { |
| 385 |
wifi_enable_h: wifi-enable-h { |
| 386 |
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 387 |
}; |
| 388 |
}; |
| 389 |
|
| 390 |
usb { |
| 391 |
usb_host_pwren: usb-host-pwren { |
| 392 |
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 393 |
}; |
| 394 |
|
| 395 |
usb_otg_pwren: usb-otg-pwren { |
| 396 |
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 397 |
}; |
| 398 |
}; |
| 399 |
}; |
| 400 |
|
| 401 |
&saradc0 { |
| 402 |
vref-supply = <&vcc_1v8>; |
| 403 |
status = "okay"; |
| 404 |
}; |
| 405 |
|
| 406 |
&sdhci { |
| 407 |
bus-width = <8>; |
| 408 |
no-sdio; |
| 409 |
no-sd; |
| 410 |
non-removable; |
| 411 |
mmc-hs400-1_8v; |
| 412 |
mmc-hs400-enhanced-strobe; |
| 413 |
full-pwr-cycle-in-suspend; |
| 414 |
status = "okay"; |
| 415 |
}; |
| 416 |
|
| 417 |
&sdmmc0 { |
| 418 |
no-sdio; |
| 419 |
no-mmc; |
| 420 |
bus-width = <4>; |
| 421 |
cap-mmc-highspeed; |
| 422 |
cap-sd-highspeed; |
| 423 |
disable-wp; |
| 424 |
pinctrl-names = "default"; |
| 425 |
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; |
| 426 |
sd-uhs-sdr104; |
| 427 |
vmmc-supply = <&vcc3v3_sd>; |
| 428 |
vqmmc-supply = <&vccio_sd>; |
| 429 |
status = "okay"; |
| 430 |
}; |
| 431 |
|
| 432 |
&sdmmc1 { |
| 433 |
no-sd; |
| 434 |
no-mmc; |
| 435 |
bus-width = <4>; |
| 436 |
disable-wp; |
| 437 |
cap-sd-highspeed; |
| 438 |
cap-sdio-irq; |
| 439 |
keep-power-in-suspend; |
| 440 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 441 |
non-removable; |
| 442 |
pinctrl-names = "default"; |
| 443 |
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; |
| 444 |
sd-uhs-sdr104; |
| 445 |
status = "okay"; |
| 446 |
}; |
| 447 |
|
| 448 |
&uart0 { |
| 449 |
status = "okay"; |
| 450 |
}; |
| 451 |
|
| 452 |
&uart1 { |
| 453 |
pinctrl-names = "default"; |
| 454 |
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; |
| 455 |
status = "okay"; |
| 456 |
}; |